From: Vignesh Raghavendra <vigneshr@ti.com>
To: Dave Gerlach <d-gerlach@ti.com>,
Joe Hershberger <joe.hershberger@ni.com>,
Ramon Fried <rfried.dev@gmail.com>,
Tom Rini <trini@konsulko.com>
Cc: <u-boot@lists.denx.de>, Vignesh Raghavendra <vigneshr@ti.com>,
Grygorii Strashko <grygorii.strashko@ti.com>
Subject: [PATCH 8/8] configs: am64x_evm_r5/a53_defconfig: Enable configs required for Ethboot
Date: Fri, 24 Dec 2021 12:55:36 +0530 [thread overview]
Message-ID: <20211224072536.270251-9-vigneshr@ti.com> (raw)
In-Reply-To: <20211224072536.270251-1-vigneshr@ti.com>
Enable config options needed to support Ethernet boot on AM64x SK.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
---
configs/am64x_evm_a53_defconfig | 4 ++++
configs/am64x_evm_r5_defconfig | 12 ++++++++++++
2 files changed, 16 insertions(+)
diff --git a/configs/am64x_evm_a53_defconfig b/configs/am64x_evm_a53_defconfig
index aafbb410b6..b8add31a30 100644
--- a/configs/am64x_evm_a53_defconfig
+++ b/configs/am64x_evm_a53_defconfig
@@ -28,6 +28,7 @@ CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_LOAD_FIT_ADDRESS=0x81000000
CONFIG_BOOTCOMMAND="run findfdt; run envboot; run init_${boot}; run get_kern_${boot}; run get_fdt_${boot}; run run_kern"
CONFIG_BOARD_LATE_INIT=y
+CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_SEPARATE_BSS=y
@@ -36,8 +37,11 @@ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1400
CONFIG_SPL_DMA=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
+CONFIG_SPL_ETH=y
CONFIG_SPL_DM_MAILBOX=y
CONFIG_SPL_DM_SPI_FLASH=y
+CONFIG_SPL_NET=y
+CONFIG_SPL_NET_VCI_STRING="AM64X U-Boot A53 SPL"
CONFIG_SPL_POWER_DOMAIN=y
CONFIG_SPL_RAM_SUPPORT=y
CONFIG_SPL_RAM_DEVICE=y
diff --git a/configs/am64x_evm_r5_defconfig b/configs/am64x_evm_r5_defconfig
index f564fa064e..01c1bc02ae 100644
--- a/configs/am64x_evm_r5_defconfig
+++ b/configs/am64x_evm_r5_defconfig
@@ -36,10 +36,14 @@ CONFIG_SPL_SEPARATE_BSS=y
CONFIG_SPL_EARLY_BSS=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x400
+CONFIG_SPL_DMA=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
+CONFIG_SPL_ETH=y
CONFIG_SPL_DM_MAILBOX=y
CONFIG_SPL_DM_SPI_FLASH=y
+CONFIG_SPL_NET=y
+CONFIG_SPL_NET_VCI_STRING="AM64X U-Boot R5 SPL"
CONFIG_SPL_DM_RESET=y
CONFIG_SPL_POWER_DOMAIN=y
CONFIG_SPL_RAM_SUPPORT=y
@@ -61,6 +65,7 @@ CONFIG_CMD_REMOTEPROC=y
CONFIG_CMD_USB=y
CONFIG_CMD_USB_MASS_STORAGE=y
# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_DHCP=y
CONFIG_CMD_TIME=y
CONFIG_CMD_FAT=y
CONFIG_OF_CONTROL=y
@@ -84,12 +89,15 @@ CONFIG_DFU_MMC=y
CONFIG_DFU_RAM=y
CONFIG_DFU_SF=y
CONFIG_SYS_DFU_DATA_BUF_SIZE=0x5000
+CONFIG_DMA_CHANNELS=y
+CONFIG_TI_K3_NAVSS_UDMA=y
CONFIG_TI_SCI_PROTOCOL=y
CONFIG_DA8XX_GPIO=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_OMAP24XX=y
CONFIG_DM_MAILBOX=y
CONFIG_K3_SEC_PROXY=y
+CONFIG_SPL_MISC=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ADMA=y
CONFIG_SPL_MMC_SDHCI_ADMA=y
@@ -97,6 +105,9 @@ CONFIG_MMC_SDHCI_AM654=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_PHY_TI_DP83867=y
+CONFIG_DM_ETH=y
+CONFIG_TI_AM65_CPSW_NUSS=y
CONFIG_PINCTRL=y
# CONFIG_PINCTRL_GENERIC is not set
CONFIG_SPL_PINCTRL=y
@@ -114,6 +125,7 @@ CONFIG_DM_RESET=y
CONFIG_RESET_TI_SCI=y
CONFIG_SPECIFY_CONSOLE_INDEX=y
CONFIG_DM_SERIAL=y
+CONFIG_SOC_TI=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_CADENCE_QSPI=y
--
2.34.1
next prev parent reply other threads:[~2021-12-24 7:27 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-24 7:25 [PATCH 0/8] ARM: ti: AM64x: Add Ethernet boot support on AM64x SK Vignesh Raghavendra
2021-12-24 7:25 ` [PATCH 1/8] mach-k3: common: Instantiate AM65 CPSW NUSS wrapper Vignesh Raghavendra
2022-01-17 18:36 ` Tom Rini
2021-12-24 7:25 ` [PATCH 2/8] net: ti: am65-cpsw: Add support for multi port independent MAC mode Vignesh Raghavendra
2021-12-29 19:31 ` Ramon Fried
2022-01-21 4:18 ` Vignesh Raghavendra
2022-01-17 18:37 ` Tom Rini
2022-01-20 23:13 ` Ramon Fried
2022-01-20 23:19 ` Tom Rini
2022-01-21 4:32 ` Vignesh Raghavendra
2021-12-24 7:25 ` [PATCH 3/8] board: ti: am64x: Init DRAM size in R5/A53 SPL Vignesh Raghavendra
2022-01-17 18:37 ` Tom Rini
2021-12-24 7:25 ` [PATCH 4/8] mach-k3: am642_init: Probe AM65 CPSW NUSS for " Vignesh Raghavendra
2022-01-17 18:37 ` Tom Rini
2021-12-24 7:25 ` [PATCH 5/8] mach-k3: am64_spl: Alias Ethernet RGMII boot to CPGMAC Vignesh Raghavendra
2022-01-17 18:37 ` Tom Rini
2021-12-24 7:25 ` [PATCH 6/8] configs: am64x_evm: set eth1 as boot interface Vignesh Raghavendra
2022-01-17 14:46 ` Tom Rini
2022-01-21 7:11 ` Vignesh Raghavendra
2021-12-24 7:25 ` [PATCH 7/8] ARM: dts: K3-am642-r5-sk: Enable Second CPSW port in R5/A53 SPL Vignesh Raghavendra
2022-01-17 18:37 ` Tom Rini
2021-12-24 7:25 ` Vignesh Raghavendra [this message]
2022-01-17 14:47 ` [PATCH 8/8] configs: am64x_evm_r5/a53_defconfig: Enable configs required for Ethboot Tom Rini
2022-01-21 4:29 ` Vignesh Raghavendra
2022-01-21 14:57 ` Tom Rini
2022-01-21 15:18 ` Vignesh Raghavendra
2022-01-21 15:21 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211224072536.270251-9-vigneshr@ti.com \
--to=vigneshr@ti.com \
--cc=d-gerlach@ti.com \
--cc=grygorii.strashko@ti.com \
--cc=joe.hershberger@ni.com \
--cc=rfried.dev@gmail.com \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.