From: Stephen Boyd <sboyd@kernel.org>
To: Felix Fietkau <nbd@nbd.name>,
Michael Turquette <mturquette@baylibre.com>
Cc: john@phrozen.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org
Subject: Re: [PATCH v7 07/14] clk: en7523: Add clock driver for Airoha EN7523 SoC
Date: Wed, 05 Jan 2022 17:29:54 -0800 [thread overview]
Message-ID: <20220106012955.69302C36AE9@smtp.kernel.org> (raw)
In-Reply-To: <20211217112345.14029-8-nbd@nbd.name>
Quoting Felix Fietkau (2021-12-17 03:23:37)
> diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
> index c5b3dc97396a..c973ac1a4890 100644
> --- a/drivers/clk/Kconfig
> +++ b/drivers/clk/Kconfig
> @@ -192,6 +192,15 @@ config COMMON_CLK_CS2000_CP
> help
> If you say yes here you get support for the CS2000 clock multiplier.
>
> +config COMMON_CLK_EN7523
> + bool "Clock driver for Airoha EN7523 SoC system clocks"
> + depends on OF
What depends on OF?
> + depends on ARCH_AIROHA || COMPILE_TEST
> + default ARCH_AIROHA
> + help
> + This driver provides the fixed clocks and gates present on Airoha
> + ARM silicon.
> +
> config COMMON_CLK_FSL_FLEXSPI
> tristate "Clock driver for FlexSPI on Layerscape SoCs"
> depends on ARCH_LAYERSCAPE || COMPILE_TEST
> diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
> diff --git a/drivers/clk/clk-en7523.c b/drivers/clk/clk-en7523.c
> new file mode 100644
> index 000000000000..828c35da0968
> --- /dev/null
> +++ b/drivers/clk/clk-en7523.c
> @@ -0,0 +1,350 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +
> +#include <linux/regmap.h>
Is this include used? Please remove unused includes.
> +#include <linux/clk-provider.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <dt-bindings/clock/en7523-clk.h>
> +
> +#define REG_PCI_CONTROL 0x88
> +#define REG_PCI_CONTROL_PERSTOUT BIT(29)
> +#define REG_PCI_CONTROL_PERSTOUT1 BIT(26)
> +#define REG_PCI_CONTROL_REFCLK_EN1 BIT(22)
> +#define REG_GSW_CLK_DIV_SEL 0x1b4
> +#define REG_EMI_CLK_DIV_SEL 0x1b8
> +#define REG_BUS_CLK_DIV_SEL 0x1bc
> +#define REG_SPI_CLK_DIV_SEL 0x1c4
> +#define REG_SPI_CLK_FREQ_SEL 0x1c8
> +#define REG_NPU_CLK_DIV_SEL 0x1fc
> +#define REG_CRYPTO_CLKSRC 0x200
> +#define REG_RESET_CONTROL 0x834
> +#define REG_RESET_CONTROL_PCIEHB BIT(29)
> +#define REG_RESET_CONTROL_PCIE1 BIT(27)
> +#define REG_RESET_CONTROL_PCIE2 BIT(26)
> +
> +struct en_clk_desc {
> + int id;
> + const char *name;
> + u32 base_reg;
> + u32 base_bits;
> + u32 base_shift;
> + union {
> + const u32 *base_values;
> + u32 base_value;
> + };
> + int n_base_values;
> +
> + u32 div_reg;
> + u32 div_bits;
> + u32 div_shift;
> + u32 div_val0;
> + u32 div_step;
> +};
> +
> +struct en_clk_gate {
> + void __iomem *base;
> + struct clk_hw hw;
> +};
> +
> +static const u32 gsw_base[] = { 400000000, 500000000 };
> +static const u32 emi_base[] = { 333000000, 400000000 };
> +static const u32 bus_base[] = { 500000000, 540000000 };
> +static const u32 slic_base[] = { 100000000, 3125000 };
> +static const u32 npu_base[] = { 333000000, 400000000, 500000000 };
> +
> +static const struct en_clk_desc en7523_base_clks[] = {
> + {
> + .id = EN7523_CLK_GSW,
> + .name = "gsw",
> +
> + .base_reg = REG_GSW_CLK_DIV_SEL,
> + .base_bits = 1,
> + .base_shift = 8,
> + .base_values = gsw_base,
> + .n_base_values = ARRAY_SIZE(gsw_base),
> +
> + .div_bits = 3,
> + .div_shift = 0,
> + .div_step = 1,
> + }, {
> + .id = EN7523_CLK_EMI,
> + .name = "emi",
> +
> + .base_reg = REG_EMI_CLK_DIV_SEL,
> + .base_bits = 1,
> + .base_shift = 8,
> + .base_values = emi_base,
> + .n_base_values = ARRAY_SIZE(emi_base),
> +
> + .div_bits = 3,
> + .div_shift = 0,
> + .div_step = 1,
> + }, {
> + .id = EN7523_CLK_BUS,
> + .name = "bus",
> +
> + .base_reg = REG_BUS_CLK_DIV_SEL,
> + .base_bits = 1,
> + .base_shift = 8,
> + .base_values = bus_base,
> + .n_base_values = ARRAY_SIZE(bus_base),
> +
> + .div_bits = 3,
> + .div_shift = 0,
> + .div_step = 1,
> + }, {
> + .id = EN7523_CLK_SLIC,
> + .name = "slic",
> +
> + .base_reg = REG_SPI_CLK_FREQ_SEL,
> + .base_bits = 1,
> + .base_shift = 0,
> + .base_values = slic_base,
> + .n_base_values = ARRAY_SIZE(slic_base),
> +
> + .div_reg = REG_SPI_CLK_DIV_SEL,
> + .div_bits = 5,
> + .div_shift = 24,
> + .div_val0 = 20,
> + .div_step = 2,
> + }, {
> + .id = EN7523_CLK_SPI,
> + .name = "spi",
> +
> + .base_reg = REG_SPI_CLK_DIV_SEL,
> +
> + .base_value = 400000000,
> +
> + .div_bits = 5,
> + .div_shift = 8,
> + .div_val0 = 40,
> + .div_step = 2,
> + }, {
> + .id = EN7523_CLK_NPU,
> + .name = "npu",
> +
> + .base_reg = REG_NPU_CLK_DIV_SEL,
> + .base_bits = 2,
> + .base_shift = 8,
> + .base_values = npu_base,
> + .n_base_values = ARRAY_SIZE(npu_base),
> +
> + .div_bits = 3,
> + .div_shift = 0,
> + .div_step = 1,
> + }, {
> + .id = EN7523_CLK_CRYPTO,
> + .name = "crypto",
> +
> + .base_reg = REG_CRYPTO_CLKSRC,
> + .base_bits = 1,
> + .base_shift = 8,
> + .base_values = emi_base,
> + .n_base_values = ARRAY_SIZE(emi_base),
> + }
> +};
> +
> +static const struct of_device_id of_match_clk_en7523[] = {
Please move this down near the driver struct that uses it.
> + { .compatible = "airoha,en7523-scu", },
> + { /* sentinel */ }
> +};
> +
> +static u32 en7523_get_base_rate(void __iomem *base, int i)
> +{
> + const struct en_clk_desc *desc = &en7523_base_clks[i];
> + u32 val;
> +
> + if (!desc->base_bits)
> + return desc->base_value;
> +
> + val = readl(base + desc->base_reg);
> + val >>= desc->base_shift;
> + val &= (1 << desc->base_bits) - 1;
> +
> + if (val >= desc->n_base_values)
> + return 0;
> +
> + return desc->base_values[val];
> +}
> +
> +static u32 en7523_get_div(void __iomem *base, int i)
> +{
> + const struct en_clk_desc *desc = &en7523_base_clks[i];
> + u32 reg, val;
> +
> + if (!desc->div_bits)
> + return 1;
> +
> + reg = desc->div_reg ? desc->div_reg : desc->base_reg;
> + val = readl(base + reg);
> + val >>= desc->div_shift;
> + val &= (1 << desc->div_bits) - 1;
> +
> + if (!val && desc->div_val0)
> + return desc->div_val0;
> +
> + return (val + 1) * desc->div_step;
> +}
> +
> +static int en7523_pci_is_enabled(struct clk_hw *hw)
> +{
> + struct en_clk_gate *cg = container_of(hw, struct en_clk_gate, hw);
> +
> + return !!(readl(cg->base + REG_PCI_CONTROL) & REG_PCI_CONTROL_REFCLK_EN1);
> +}
> +
> +static int en7523_pci_enable(struct clk_hw *hw)
> +{
> + struct en_clk_gate *cg = container_of(hw, struct en_clk_gate, hw);
> + void __iomem *np_base = cg->base;
> + u32 val, mask;
> +
> + /* Need to pull device low before reset */
> + val = readl(np_base + REG_PCI_CONTROL);
> + val &= ~(REG_PCI_CONTROL_PERSTOUT1 | REG_PCI_CONTROL_PERSTOUT);
> + writel(val, np_base + REG_PCI_CONTROL);
> + usleep_range(1000, 2000);
This clk_op is called under a spinlock and thus nothing in here can
sleep. These need to be udelays and mdelays instead, or this needs to be
a prepare clk_op.
> +
> + /* Enable PCIe port 1 */
> + val |= REG_PCI_CONTROL_REFCLK_EN1;
> + writel(val, np_base + REG_PCI_CONTROL);
> + usleep_range(1000, 2000);
> +
> + /* Reset to default */
> + val = readl(np_base + REG_RESET_CONTROL);
> + mask = REG_RESET_CONTROL_PCIE1 | REG_RESET_CONTROL_PCIE2 |
> + REG_RESET_CONTROL_PCIEHB;
> + writel(val & ~mask, np_base + REG_RESET_CONTROL);
> + usleep_range(1000, 2000);
> + writel(val | mask, np_base + REG_RESET_CONTROL);
> + msleep(100);
> + writel(val & ~mask, np_base + REG_RESET_CONTROL);
> + usleep_range(5000, 10000);
> +
> + /* Release device */
> + mask = REG_PCI_CONTROL_PERSTOUT1 | REG_PCI_CONTROL_PERSTOUT;
> + val = readl(np_base + REG_PCI_CONTROL);
> + writel(val & ~mask, np_base + REG_PCI_CONTROL);
> + usleep_range(1000, 2000);
> + writel(val | mask, np_base + REG_PCI_CONTROL);
> + msleep(250);
> +
> + return 0;
> +}
> +
> +static void en7523_pci_disable(struct clk_hw *hw)
> +{
> + struct en_clk_gate *cg = container_of(hw, struct en_clk_gate, hw);
> + void *np_base = cg->base;
> + u32 val;
> +
> + val = readl(np_base + REG_PCI_CONTROL);
> + val &= ~REG_PCI_CONTROL_REFCLK_EN1;
> + writel(val, np_base + REG_PCI_CONTROL);
> +}
> +
> +static struct clk_hw *en7523_register_pcie_clk(struct device *dev,
> + void __iomem *np_base)
> +{
> + static const struct clk_ops pcie_gate_ops = {
> + .is_enabled = en7523_pci_is_enabled,
> + .enable = en7523_pci_enable,
> + .disable = en7523_pci_disable,
> + };
> + struct clk_init_data init = {
> + .name = "pcie",
> + .ops = &pcie_gate_ops,
> + };
> + struct en_clk_gate *cg;
> +
> + cg = devm_kzalloc(dev, sizeof(*cg), GFP_KERNEL);
> + if (!cg)
> + return NULL;
> +
> + cg->base = np_base;
> + cg->hw.init = &init;
> + en7523_pci_disable(&cg->hw);
> +
> + if (clk_hw_register(NULL, &cg->hw))
> + return NULL;
> +
> + return &cg->hw;
> +}
> +
> +static void en7523_register_clocks(struct device *dev, struct clk_hw_onecell_data *clk_data,
> + void __iomem *base, void __iomem *np_base)
> +{
> + struct clk_hw *hw;
> + u32 rate;
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(en7523_base_clks); i++) {
> + const struct en_clk_desc *desc = &en7523_base_clks[i];
> +
> + rate = en7523_get_base_rate(base, i);
> + rate /= en7523_get_div(base, i);
> +
> + hw = clk_hw_register_fixed_rate(NULL, desc->name, NULL, 0, rate);
Please pass 'dev' to this function.
> + if (IS_ERR(hw)) {
> + pr_err("Failed to register clk %s: %ld\n",
> + desc->name, PTR_ERR(hw));
> + continue;
> + }
> +
> + clk_data->hws[desc->id] = hw;
> + }
> +
> + hw = en7523_register_pcie_clk(dev, np_base);
> + clk_data->hws[EN7523_CLK_PCIE] = hw;
> +
> + clk_data->num = EN7523_NUM_CLOCKS;
> +}
> +
> +static int en7523_clk_probe(struct platform_device *pdev)
> +{
> + struct device_node *node = pdev->dev.of_node;
> + struct clk_hw_onecell_data *clk_data;
> + void __iomem *base, *np_base;
> + int r;
> +
> + base = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(base))
> + return PTR_ERR(base);
> +
> + np_base = devm_platform_ioremap_resource(pdev, 1);
> + if (IS_ERR(base))
> + return PTR_ERR(np_base);
> +
> + clk_data = devm_kzalloc(&pdev->dev,
> + struct_size(clk_data, hws, EN7523_NUM_CLOCKS),
> + GFP_KERNEL);
> + if (!clk_data)
> + return -ENOMEM;
> +
> + en7523_register_clocks(&pdev->dev, clk_data, base, np_base);
> +
> + r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
> + if (r)
> + dev_err(&pdev->dev,
> + "could not register clock provider: %s: %d\n",
> + pdev->name, r);
> +
> + return r;
> +}
> +
> +static struct platform_driver clk_en7523_drv = {
> + .probe = en7523_clk_probe,
> + .driver = {
> + .name = "clk-en7523",
> + .of_match_table = of_match_clk_en7523,
> + },
> +};
> +
> +static int clk_en7523_init(void)
Add __init
> +{
> + return platform_driver_register(&clk_en7523_drv);
> +}
> +
> +arch_initcall(clk_en7523_init);
WARNING: multiple messages have this Message-ID (diff)
From: Stephen Boyd <sboyd@kernel.org>
To: Felix Fietkau <nbd@nbd.name>,
Michael Turquette <mturquette@baylibre.com>
Cc: john@phrozen.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org
Subject: Re: [PATCH v7 07/14] clk: en7523: Add clock driver for Airoha EN7523 SoC
Date: Wed, 05 Jan 2022 17:29:54 -0800 [thread overview]
Message-ID: <20220106012955.69302C36AE9@smtp.kernel.org> (raw)
In-Reply-To: <20211217112345.14029-8-nbd@nbd.name>
Quoting Felix Fietkau (2021-12-17 03:23:37)
> diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
> index c5b3dc97396a..c973ac1a4890 100644
> --- a/drivers/clk/Kconfig
> +++ b/drivers/clk/Kconfig
> @@ -192,6 +192,15 @@ config COMMON_CLK_CS2000_CP
> help
> If you say yes here you get support for the CS2000 clock multiplier.
>
> +config COMMON_CLK_EN7523
> + bool "Clock driver for Airoha EN7523 SoC system clocks"
> + depends on OF
What depends on OF?
> + depends on ARCH_AIROHA || COMPILE_TEST
> + default ARCH_AIROHA
> + help
> + This driver provides the fixed clocks and gates present on Airoha
> + ARM silicon.
> +
> config COMMON_CLK_FSL_FLEXSPI
> tristate "Clock driver for FlexSPI on Layerscape SoCs"
> depends on ARCH_LAYERSCAPE || COMPILE_TEST
> diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
> diff --git a/drivers/clk/clk-en7523.c b/drivers/clk/clk-en7523.c
> new file mode 100644
> index 000000000000..828c35da0968
> --- /dev/null
> +++ b/drivers/clk/clk-en7523.c
> @@ -0,0 +1,350 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +
> +#include <linux/regmap.h>
Is this include used? Please remove unused includes.
> +#include <linux/clk-provider.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <dt-bindings/clock/en7523-clk.h>
> +
> +#define REG_PCI_CONTROL 0x88
> +#define REG_PCI_CONTROL_PERSTOUT BIT(29)
> +#define REG_PCI_CONTROL_PERSTOUT1 BIT(26)
> +#define REG_PCI_CONTROL_REFCLK_EN1 BIT(22)
> +#define REG_GSW_CLK_DIV_SEL 0x1b4
> +#define REG_EMI_CLK_DIV_SEL 0x1b8
> +#define REG_BUS_CLK_DIV_SEL 0x1bc
> +#define REG_SPI_CLK_DIV_SEL 0x1c4
> +#define REG_SPI_CLK_FREQ_SEL 0x1c8
> +#define REG_NPU_CLK_DIV_SEL 0x1fc
> +#define REG_CRYPTO_CLKSRC 0x200
> +#define REG_RESET_CONTROL 0x834
> +#define REG_RESET_CONTROL_PCIEHB BIT(29)
> +#define REG_RESET_CONTROL_PCIE1 BIT(27)
> +#define REG_RESET_CONTROL_PCIE2 BIT(26)
> +
> +struct en_clk_desc {
> + int id;
> + const char *name;
> + u32 base_reg;
> + u32 base_bits;
> + u32 base_shift;
> + union {
> + const u32 *base_values;
> + u32 base_value;
> + };
> + int n_base_values;
> +
> + u32 div_reg;
> + u32 div_bits;
> + u32 div_shift;
> + u32 div_val0;
> + u32 div_step;
> +};
> +
> +struct en_clk_gate {
> + void __iomem *base;
> + struct clk_hw hw;
> +};
> +
> +static const u32 gsw_base[] = { 400000000, 500000000 };
> +static const u32 emi_base[] = { 333000000, 400000000 };
> +static const u32 bus_base[] = { 500000000, 540000000 };
> +static const u32 slic_base[] = { 100000000, 3125000 };
> +static const u32 npu_base[] = { 333000000, 400000000, 500000000 };
> +
> +static const struct en_clk_desc en7523_base_clks[] = {
> + {
> + .id = EN7523_CLK_GSW,
> + .name = "gsw",
> +
> + .base_reg = REG_GSW_CLK_DIV_SEL,
> + .base_bits = 1,
> + .base_shift = 8,
> + .base_values = gsw_base,
> + .n_base_values = ARRAY_SIZE(gsw_base),
> +
> + .div_bits = 3,
> + .div_shift = 0,
> + .div_step = 1,
> + }, {
> + .id = EN7523_CLK_EMI,
> + .name = "emi",
> +
> + .base_reg = REG_EMI_CLK_DIV_SEL,
> + .base_bits = 1,
> + .base_shift = 8,
> + .base_values = emi_base,
> + .n_base_values = ARRAY_SIZE(emi_base),
> +
> + .div_bits = 3,
> + .div_shift = 0,
> + .div_step = 1,
> + }, {
> + .id = EN7523_CLK_BUS,
> + .name = "bus",
> +
> + .base_reg = REG_BUS_CLK_DIV_SEL,
> + .base_bits = 1,
> + .base_shift = 8,
> + .base_values = bus_base,
> + .n_base_values = ARRAY_SIZE(bus_base),
> +
> + .div_bits = 3,
> + .div_shift = 0,
> + .div_step = 1,
> + }, {
> + .id = EN7523_CLK_SLIC,
> + .name = "slic",
> +
> + .base_reg = REG_SPI_CLK_FREQ_SEL,
> + .base_bits = 1,
> + .base_shift = 0,
> + .base_values = slic_base,
> + .n_base_values = ARRAY_SIZE(slic_base),
> +
> + .div_reg = REG_SPI_CLK_DIV_SEL,
> + .div_bits = 5,
> + .div_shift = 24,
> + .div_val0 = 20,
> + .div_step = 2,
> + }, {
> + .id = EN7523_CLK_SPI,
> + .name = "spi",
> +
> + .base_reg = REG_SPI_CLK_DIV_SEL,
> +
> + .base_value = 400000000,
> +
> + .div_bits = 5,
> + .div_shift = 8,
> + .div_val0 = 40,
> + .div_step = 2,
> + }, {
> + .id = EN7523_CLK_NPU,
> + .name = "npu",
> +
> + .base_reg = REG_NPU_CLK_DIV_SEL,
> + .base_bits = 2,
> + .base_shift = 8,
> + .base_values = npu_base,
> + .n_base_values = ARRAY_SIZE(npu_base),
> +
> + .div_bits = 3,
> + .div_shift = 0,
> + .div_step = 1,
> + }, {
> + .id = EN7523_CLK_CRYPTO,
> + .name = "crypto",
> +
> + .base_reg = REG_CRYPTO_CLKSRC,
> + .base_bits = 1,
> + .base_shift = 8,
> + .base_values = emi_base,
> + .n_base_values = ARRAY_SIZE(emi_base),
> + }
> +};
> +
> +static const struct of_device_id of_match_clk_en7523[] = {
Please move this down near the driver struct that uses it.
> + { .compatible = "airoha,en7523-scu", },
> + { /* sentinel */ }
> +};
> +
> +static u32 en7523_get_base_rate(void __iomem *base, int i)
> +{
> + const struct en_clk_desc *desc = &en7523_base_clks[i];
> + u32 val;
> +
> + if (!desc->base_bits)
> + return desc->base_value;
> +
> + val = readl(base + desc->base_reg);
> + val >>= desc->base_shift;
> + val &= (1 << desc->base_bits) - 1;
> +
> + if (val >= desc->n_base_values)
> + return 0;
> +
> + return desc->base_values[val];
> +}
> +
> +static u32 en7523_get_div(void __iomem *base, int i)
> +{
> + const struct en_clk_desc *desc = &en7523_base_clks[i];
> + u32 reg, val;
> +
> + if (!desc->div_bits)
> + return 1;
> +
> + reg = desc->div_reg ? desc->div_reg : desc->base_reg;
> + val = readl(base + reg);
> + val >>= desc->div_shift;
> + val &= (1 << desc->div_bits) - 1;
> +
> + if (!val && desc->div_val0)
> + return desc->div_val0;
> +
> + return (val + 1) * desc->div_step;
> +}
> +
> +static int en7523_pci_is_enabled(struct clk_hw *hw)
> +{
> + struct en_clk_gate *cg = container_of(hw, struct en_clk_gate, hw);
> +
> + return !!(readl(cg->base + REG_PCI_CONTROL) & REG_PCI_CONTROL_REFCLK_EN1);
> +}
> +
> +static int en7523_pci_enable(struct clk_hw *hw)
> +{
> + struct en_clk_gate *cg = container_of(hw, struct en_clk_gate, hw);
> + void __iomem *np_base = cg->base;
> + u32 val, mask;
> +
> + /* Need to pull device low before reset */
> + val = readl(np_base + REG_PCI_CONTROL);
> + val &= ~(REG_PCI_CONTROL_PERSTOUT1 | REG_PCI_CONTROL_PERSTOUT);
> + writel(val, np_base + REG_PCI_CONTROL);
> + usleep_range(1000, 2000);
This clk_op is called under a spinlock and thus nothing in here can
sleep. These need to be udelays and mdelays instead, or this needs to be
a prepare clk_op.
> +
> + /* Enable PCIe port 1 */
> + val |= REG_PCI_CONTROL_REFCLK_EN1;
> + writel(val, np_base + REG_PCI_CONTROL);
> + usleep_range(1000, 2000);
> +
> + /* Reset to default */
> + val = readl(np_base + REG_RESET_CONTROL);
> + mask = REG_RESET_CONTROL_PCIE1 | REG_RESET_CONTROL_PCIE2 |
> + REG_RESET_CONTROL_PCIEHB;
> + writel(val & ~mask, np_base + REG_RESET_CONTROL);
> + usleep_range(1000, 2000);
> + writel(val | mask, np_base + REG_RESET_CONTROL);
> + msleep(100);
> + writel(val & ~mask, np_base + REG_RESET_CONTROL);
> + usleep_range(5000, 10000);
> +
> + /* Release device */
> + mask = REG_PCI_CONTROL_PERSTOUT1 | REG_PCI_CONTROL_PERSTOUT;
> + val = readl(np_base + REG_PCI_CONTROL);
> + writel(val & ~mask, np_base + REG_PCI_CONTROL);
> + usleep_range(1000, 2000);
> + writel(val | mask, np_base + REG_PCI_CONTROL);
> + msleep(250);
> +
> + return 0;
> +}
> +
> +static void en7523_pci_disable(struct clk_hw *hw)
> +{
> + struct en_clk_gate *cg = container_of(hw, struct en_clk_gate, hw);
> + void *np_base = cg->base;
> + u32 val;
> +
> + val = readl(np_base + REG_PCI_CONTROL);
> + val &= ~REG_PCI_CONTROL_REFCLK_EN1;
> + writel(val, np_base + REG_PCI_CONTROL);
> +}
> +
> +static struct clk_hw *en7523_register_pcie_clk(struct device *dev,
> + void __iomem *np_base)
> +{
> + static const struct clk_ops pcie_gate_ops = {
> + .is_enabled = en7523_pci_is_enabled,
> + .enable = en7523_pci_enable,
> + .disable = en7523_pci_disable,
> + };
> + struct clk_init_data init = {
> + .name = "pcie",
> + .ops = &pcie_gate_ops,
> + };
> + struct en_clk_gate *cg;
> +
> + cg = devm_kzalloc(dev, sizeof(*cg), GFP_KERNEL);
> + if (!cg)
> + return NULL;
> +
> + cg->base = np_base;
> + cg->hw.init = &init;
> + en7523_pci_disable(&cg->hw);
> +
> + if (clk_hw_register(NULL, &cg->hw))
> + return NULL;
> +
> + return &cg->hw;
> +}
> +
> +static void en7523_register_clocks(struct device *dev, struct clk_hw_onecell_data *clk_data,
> + void __iomem *base, void __iomem *np_base)
> +{
> + struct clk_hw *hw;
> + u32 rate;
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(en7523_base_clks); i++) {
> + const struct en_clk_desc *desc = &en7523_base_clks[i];
> +
> + rate = en7523_get_base_rate(base, i);
> + rate /= en7523_get_div(base, i);
> +
> + hw = clk_hw_register_fixed_rate(NULL, desc->name, NULL, 0, rate);
Please pass 'dev' to this function.
> + if (IS_ERR(hw)) {
> + pr_err("Failed to register clk %s: %ld\n",
> + desc->name, PTR_ERR(hw));
> + continue;
> + }
> +
> + clk_data->hws[desc->id] = hw;
> + }
> +
> + hw = en7523_register_pcie_clk(dev, np_base);
> + clk_data->hws[EN7523_CLK_PCIE] = hw;
> +
> + clk_data->num = EN7523_NUM_CLOCKS;
> +}
> +
> +static int en7523_clk_probe(struct platform_device *pdev)
> +{
> + struct device_node *node = pdev->dev.of_node;
> + struct clk_hw_onecell_data *clk_data;
> + void __iomem *base, *np_base;
> + int r;
> +
> + base = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(base))
> + return PTR_ERR(base);
> +
> + np_base = devm_platform_ioremap_resource(pdev, 1);
> + if (IS_ERR(base))
> + return PTR_ERR(np_base);
> +
> + clk_data = devm_kzalloc(&pdev->dev,
> + struct_size(clk_data, hws, EN7523_NUM_CLOCKS),
> + GFP_KERNEL);
> + if (!clk_data)
> + return -ENOMEM;
> +
> + en7523_register_clocks(&pdev->dev, clk_data, base, np_base);
> +
> + r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
> + if (r)
> + dev_err(&pdev->dev,
> + "could not register clock provider: %s: %d\n",
> + pdev->name, r);
> +
> + return r;
> +}
> +
> +static struct platform_driver clk_en7523_drv = {
> + .probe = en7523_clk_probe,
> + .driver = {
> + .name = "clk-en7523",
> + .of_match_table = of_match_clk_en7523,
> + },
> +};
> +
> +static int clk_en7523_init(void)
Add __init
> +{
> + return platform_driver_register(&clk_en7523_drv);
> +}
> +
> +arch_initcall(clk_en7523_init);
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-01-06 1:30 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-17 11:23 [PATCH v7 00/14] Add support for Airoha EN7523 SoC Felix Fietkau
2021-12-17 11:23 ` Felix Fietkau
2021-12-17 11:23 ` [PATCH v7 01/14] dt-bindings: Add vendor prefix for Airoha Felix Fietkau
2021-12-17 11:23 ` Felix Fietkau
2021-12-17 11:23 ` [PATCH v7 02/14] dt-bindings: arm: airoha: Add binding for EN7523 SoC and EVB Felix Fietkau
2021-12-17 11:23 ` Felix Fietkau
2021-12-17 11:23 ` [PATCH v7 03/14] ARM: dts: Add basic support for Airoha EN7523 Felix Fietkau
2021-12-17 11:23 ` Felix Fietkau
2021-12-17 11:23 ` [PATCH v7 04/14] ARM: Add basic support for Airoha EN7523 SoC Felix Fietkau
2021-12-17 11:23 ` Felix Fietkau
2021-12-17 11:23 ` [PATCH v7 05/14] ARM: multi_v7_defconfig: Add " Felix Fietkau
2021-12-17 11:23 ` Felix Fietkau
2021-12-17 11:23 ` [PATCH v7 06/14] dt-bindings: Add en7523-scu device tree binding documentation Felix Fietkau
2021-12-17 11:23 ` Felix Fietkau
2022-01-06 1:30 ` Stephen Boyd
2022-01-06 1:30 ` Stephen Boyd
2021-12-17 11:23 ` [PATCH v7 07/14] clk: en7523: Add clock driver for Airoha EN7523 SoC Felix Fietkau
2021-12-17 11:23 ` Felix Fietkau
2021-12-18 23:12 ` kernel test robot
2021-12-18 23:12 ` kernel test robot
2021-12-18 23:12 ` kernel test robot
2022-01-06 1:29 ` Stephen Boyd [this message]
2022-01-06 1:29 ` Stephen Boyd
2021-12-17 11:23 ` [PATCH v7 08/14] ARM: dts: add clock support for Airoha EN7523 Felix Fietkau
2021-12-17 11:23 ` Felix Fietkau
2021-12-17 11:23 ` [PATCH v7 09/14] dt-bindings: PCI: Add support for Airoha EN7532 Felix Fietkau
2021-12-17 11:23 ` Felix Fietkau
2021-12-17 11:23 ` Felix Fietkau
2021-12-17 16:21 ` Bjorn Helgaas
2021-12-17 16:21 ` Bjorn Helgaas
2021-12-17 16:21 ` Bjorn Helgaas
2021-12-17 11:23 ` [PATCH v7 10/14] PCI: mediatek: Allow selecting controller driver for airoha arch Felix Fietkau
2021-12-17 11:23 ` Felix Fietkau
2021-12-17 11:23 ` Felix Fietkau
2021-12-17 16:25 ` Bjorn Helgaas
2021-12-17 16:25 ` Bjorn Helgaas
2021-12-17 16:25 ` Bjorn Helgaas
2021-12-17 11:23 ` [PATCH v7 11/14] ARM: dts: Add PCIe support for Airoha EN7523 Felix Fietkau
2021-12-17 11:23 ` Felix Fietkau
2021-12-17 11:23 ` Felix Fietkau
2021-12-17 11:23 ` [PATCH v7 12/14] dt-bindings: arm: airoha: Add binding for Airoha GPIO controller Felix Fietkau
2021-12-17 11:23 ` Felix Fietkau
2021-12-17 11:23 ` [PATCH v7 13/14] gpio: Add support for Airoha EN7523 " Felix Fietkau
2021-12-17 11:23 ` Felix Fietkau
2021-12-22 2:06 ` Linus Walleij
2021-12-22 2:06 ` Linus Walleij
2021-12-22 7:56 ` Bartosz Golaszewski
2021-12-22 7:56 ` Bartosz Golaszewski
2021-12-17 11:23 ` [PATCH v7 14/14] ARM: dts: add GPIO support for Airoha EN7523 Felix Fietkau
2021-12-17 11:23 ` Felix Fietkau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220106012955.69302C36AE9@smtp.kernel.org \
--to=sboyd@kernel.org \
--cc=john@phrozen.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=nbd@nbd.name \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.