From: "Pali Rohár" <pali@kernel.org>
To: Stefan Roese <sr@denx.de>
Cc: linux-pci@vger.kernel.org,
Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com>,
Bjorn Helgaas <helgaas@kernel.org>,
Michal Simek <michal.simek@xilinx.com>
Subject: Re: [PATCH v3 1/2] PCI/portdrv: Add option to setup IRQs for platform-specific Service Errors
Date: Thu, 13 Jan 2022 12:14:50 +0100 [thread overview]
Message-ID: <20220113111450.pgacviso7sn627ln@pali> (raw)
In-Reply-To: <20220113104939.1635398-2-sr@denx.de>
On Thursday 13 January 2022 11:49:38 Stefan Roese wrote:
> From: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com>
>
> As per section 6.2.4.1.2, 6.2.6 in PCIe r4.0 (and later versions),
> platform-specific System Errors like AER can be delivered via platform-
> specific interrupt lines.
>
> This patch adds the init_platform_service_irqs() hook to struct
> pci_host_bridge, making it possible that platforms may implement this
> function to hook IRQs for these platform-specific System Errors, like
> AER.
>
> If these platform-specific service IRQs have been successfully
> installed via pcie_init_platform_service_irqs(),
> pcie_init_service_irqs() is skipped.
>
> Signed-off-by: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com>
> Signed-off-by: Stefan Roese <sr@denx.de>
> Cc: Bjorn Helgaas <helgaas@kernel.org>
> Cc: Pali Rohár <pali@kernel.org>
> Cc: Michal Simek <michal.simek@xilinx.com>
> ---
> drivers/pci/pcie/portdrv_core.c | 43 ++++++++++++++++++++++++++++++++-
> include/linux/pci.h | 2 ++
> 2 files changed, 44 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c
> index bda630889f95..4dab74ff4368 100644
> --- a/drivers/pci/pcie/portdrv_core.c
> +++ b/drivers/pci/pcie/portdrv_core.c
> @@ -190,6 +190,31 @@ static int pcie_init_service_irqs(struct pci_dev *dev, int *irqs, int mask)
> return 0;
> }
>
> +/**
> + * pcie_init_platform_service_irqs - initialize platform service irqs for
> + * platform-specific System Errors
> + * @dev: PCI Express port to handle
> + * @irqs: Array of irqs to populate
> + * @mask: Bitmask of capabilities
> + *
> + * Return value: true/false for platforms service irqs installed or not
> + */
> +static bool pcie_init_platform_service_irqs(struct pci_dev *dev,
> + int *irqs, int mask)
> +{
> + struct pci_host_bridge *bridge;
> +
> + if (pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT) {
I think that this check is not needed as it is done before calling
pcie_init_platform_service_irqs() function.
> + bridge = pci_find_host_bridge(dev->bus);
> + if (bridge && bridge->init_platform_service_irqs) {
> + bridge->init_platform_service_irqs(dev, irqs, mask);
> + return true;
Suggestion: What about "return bridge->init_platform_service_irqs(...);" ?
This could allow callback function to fail...
> + }
> + }
> +
> + return false;
> +}
> +
> /**
> * get_port_device_capability - discover capabilities of a PCI Express port
> * @dev: PCI Express port to examine
> @@ -318,6 +343,7 @@ int pcie_port_device_register(struct pci_dev *dev)
> int irqs[PCIE_PORT_DEVICE_MAXSERVICES] = {
> [0 ... PCIE_PORT_DEVICE_MAXSERVICES-1] = -1
> };
> + bool plat_irqs;
>
> /* Enable PCI Express port device */
> status = pci_enable_device(dev);
> @@ -342,7 +368,22 @@ int pcie_port_device_register(struct pci_dev *dev)
> irq_services |= PCIE_PORT_SERVICE_DPC;
> irq_services &= capabilities;
>
> - if (irq_services) {
> + /*
> + * Some platforms have dedicated interrupts from root complex to
> + * interrupt controller for PCIe platform-specific System Errors
> + * like AER/PME etc., check if the platform registered with any such
> + * IRQ.
> + */
> + if (pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT) {
> + plat_irqs = pcie_init_platform_service_irqs(dev, irqs,
> + capabilities);
> + }
> +
> + /*
> + * Only install service irqs, when the platform-specific hook was
> + * unsuccessful
> + */
> + if (irq_services && !plat_irqs) {
> /*
> * Initialize service IRQs. Don't use service devices that
> * require interrupts if there is no way to generate them.
> diff --git a/include/linux/pci.h b/include/linux/pci.h
> index 18a75c8e615c..a0bcc8062b91 100644
> --- a/include/linux/pci.h
> +++ b/include/linux/pci.h
> @@ -554,6 +554,8 @@ struct pci_host_bridge {
> u8 (*swizzle_irq)(struct pci_dev *, u8 *); /* Platform IRQ swizzler */
> int (*map_irq)(const struct pci_dev *, u8, u8);
> void (*release_fn)(struct pci_host_bridge *);
> + void (*init_platform_service_irqs)(struct pci_dev *dev, int *irqs,
> + int plat_mask);
> void *release_data;
> unsigned int ignore_reset_delay:1; /* For entire hierarchy */
> unsigned int no_ext_tags:1; /* No Extended Tags */
> --
> 2.34.1
>
next prev parent reply other threads:[~2022-01-13 11:14 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-13 10:49 [PATCH v3 0/2] Add support to register platform service IRQ Stefan Roese
2022-01-13 10:49 ` [PATCH v3 1/2] PCI/portdrv: Add option to setup IRQs for platform-specific Service Errors Stefan Roese
2022-01-13 11:14 ` Pali Rohár [this message]
2022-01-13 11:45 ` Stefan Roese
2022-01-13 10:49 ` [PATCH v3 2/2] PCI: xilinx-nwl: Add method to init_platform_service_irqs hook Stefan Roese
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220113111450.pgacviso7sn627ln@pali \
--to=pali@kernel.org \
--cc=bharat.kumar.gogada@xilinx.com \
--cc=helgaas@kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=michal.simek@xilinx.com \
--cc=sr@denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.