From: Dan Carpenter <dan.carpenter@oracle.com>
To: Kishon Vijay Abraham I <kishon@ti.com>,
Alan Douglas <adouglas@cadence.com>
Cc: Vinod Koul <vkoul@kernel.org>,
Philipp Zabel <p.zabel@pengutronix.de>,
Swapnil Jakhade <sjakhade@cadence.com>,
Aswath Govindraju <a-govindraju@ti.com>,
linux-phy@lists.infradead.org, kernel-janitors@vger.kernel.org
Subject: [PATCH] phy: cadence: Sierra: fix error handling bugs in probe()
Date: Sat, 15 Jan 2022 14:51:46 +0300 [thread overview]
Message-ID: <20220115115146.GC7552@kili> (raw)
There are two bugs in the error handling:
1: If devm_of_phy_provider_register() fails then there was no cleanup.
2: The error handling called of_node_put(child) improperly leading to
a use after free. We are only holding the reference inside the loop
so the last two gotos after the loop lead to a use after free bug.
Fix this by cleaning up the partial allocations (or partial iterations)
in the loop before doing the goto.
Fixes: a43f72ae136a ("phy: cadence: Sierra: Change MAX_LANES of Sierra to 16")
Fixes: 44d30d622821 ("phy: cadence: Add driver for Sierra PHY")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
---
From static analysis. Not tested.
drivers/phy/cadence/phy-cadence-sierra.c | 35 ++++++++++++++----------
1 file changed, 21 insertions(+), 14 deletions(-)
diff --git a/drivers/phy/cadence/phy-cadence-sierra.c b/drivers/phy/cadence/phy-cadence-sierra.c
index da24acd26666..e265647e29a2 100644
--- a/drivers/phy/cadence/phy-cadence-sierra.c
+++ b/drivers/phy/cadence/phy-cadence-sierra.c
@@ -1338,7 +1338,7 @@ static int cdns_sierra_phy_probe(struct platform_device *pdev)
struct device *dev = &pdev->dev;
const struct cdns_sierra_data *data;
unsigned int id_value;
- int i, ret, node = 0;
+ int ret, node = 0;
void __iomem *base;
struct device_node *dn = dev->of_node, *child;
@@ -1416,7 +1416,8 @@ static int cdns_sierra_phy_probe(struct platform_device *pdev)
dev_err(dev, "failed to get reset %s\n",
child->full_name);
ret = PTR_ERR(sp->phys[node].lnk_rst);
- goto put_child2;
+ of_node_put(child);
+ goto put_control;
}
if (!sp->autoconf) {
@@ -1424,7 +1425,9 @@ static int cdns_sierra_phy_probe(struct platform_device *pdev)
if (ret) {
dev_err(dev, "missing property in node %s\n",
child->name);
- goto put_child;
+ of_node_put(child);
+ reset_control_put(sp->phys[node].lnk_rst);
+ goto put_control;
}
}
@@ -1434,7 +1437,9 @@ static int cdns_sierra_phy_probe(struct platform_device *pdev)
if (IS_ERR(gphy)) {
ret = PTR_ERR(gphy);
- goto put_child;
+ of_node_put(child);
+ reset_control_put(sp->phys[node].lnk_rst);
+ goto put_control;
}
sp->phys[node].phy = gphy;
phy_set_drvdata(gphy, &sp->phys[node]);
@@ -1446,26 +1451,28 @@ static int cdns_sierra_phy_probe(struct platform_device *pdev)
if (sp->num_lanes > SIERRA_MAX_LANES) {
ret = -EINVAL;
dev_err(dev, "Invalid lane configuration\n");
- goto put_child2;
+ goto put_control;
}
/* If more than one subnode, configure the PHY as multilink */
if (!sp->autoconf && sp->nsubnodes > 1) {
ret = cdns_sierra_phy_configure_multilink(sp);
if (ret)
- goto put_child2;
+ goto put_control;
}
pm_runtime_enable(dev);
phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
- return PTR_ERR_OR_ZERO(phy_provider);
-
-put_child:
- node++;
-put_child2:
- for (i = 0; i < node; i++)
- reset_control_put(sp->phys[i].lnk_rst);
- of_node_put(child);
+ if (IS_ERR(phy_provider)) {
+ ret = PTR_ERR(phy_provider);
+ goto put_control;
+ }
+
+ return 0;
+
+put_control:
+ while (--node >= 0)
+ reset_control_put(sp->phys[node].lnk_rst);
clk_disable:
cdns_sierra_phy_disable_clocks(sp);
reset_control_assert(sp->apb_rst);
--
2.20.1
WARNING: multiple messages have this Message-ID (diff)
From: Dan Carpenter <dan.carpenter@oracle.com>
To: Kishon Vijay Abraham I <kishon@ti.com>,
Alan Douglas <adouglas@cadence.com>
Cc: Vinod Koul <vkoul@kernel.org>,
Philipp Zabel <p.zabel@pengutronix.de>,
Swapnil Jakhade <sjakhade@cadence.com>,
Aswath Govindraju <a-govindraju@ti.com>,
linux-phy@lists.infradead.org, kernel-janitors@vger.kernel.org
Subject: [PATCH] phy: cadence: Sierra: fix error handling bugs in probe()
Date: Sat, 15 Jan 2022 14:51:46 +0300 [thread overview]
Message-ID: <20220115115146.GC7552@kili> (raw)
There are two bugs in the error handling:
1: If devm_of_phy_provider_register() fails then there was no cleanup.
2: The error handling called of_node_put(child) improperly leading to
a use after free. We are only holding the reference inside the loop
so the last two gotos after the loop lead to a use after free bug.
Fix this by cleaning up the partial allocations (or partial iterations)
in the loop before doing the goto.
Fixes: a43f72ae136a ("phy: cadence: Sierra: Change MAX_LANES of Sierra to 16")
Fixes: 44d30d622821 ("phy: cadence: Add driver for Sierra PHY")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
---
From static analysis. Not tested.
drivers/phy/cadence/phy-cadence-sierra.c | 35 ++++++++++++++----------
1 file changed, 21 insertions(+), 14 deletions(-)
diff --git a/drivers/phy/cadence/phy-cadence-sierra.c b/drivers/phy/cadence/phy-cadence-sierra.c
index da24acd26666..e265647e29a2 100644
--- a/drivers/phy/cadence/phy-cadence-sierra.c
+++ b/drivers/phy/cadence/phy-cadence-sierra.c
@@ -1338,7 +1338,7 @@ static int cdns_sierra_phy_probe(struct platform_device *pdev)
struct device *dev = &pdev->dev;
const struct cdns_sierra_data *data;
unsigned int id_value;
- int i, ret, node = 0;
+ int ret, node = 0;
void __iomem *base;
struct device_node *dn = dev->of_node, *child;
@@ -1416,7 +1416,8 @@ static int cdns_sierra_phy_probe(struct platform_device *pdev)
dev_err(dev, "failed to get reset %s\n",
child->full_name);
ret = PTR_ERR(sp->phys[node].lnk_rst);
- goto put_child2;
+ of_node_put(child);
+ goto put_control;
}
if (!sp->autoconf) {
@@ -1424,7 +1425,9 @@ static int cdns_sierra_phy_probe(struct platform_device *pdev)
if (ret) {
dev_err(dev, "missing property in node %s\n",
child->name);
- goto put_child;
+ of_node_put(child);
+ reset_control_put(sp->phys[node].lnk_rst);
+ goto put_control;
}
}
@@ -1434,7 +1437,9 @@ static int cdns_sierra_phy_probe(struct platform_device *pdev)
if (IS_ERR(gphy)) {
ret = PTR_ERR(gphy);
- goto put_child;
+ of_node_put(child);
+ reset_control_put(sp->phys[node].lnk_rst);
+ goto put_control;
}
sp->phys[node].phy = gphy;
phy_set_drvdata(gphy, &sp->phys[node]);
@@ -1446,26 +1451,28 @@ static int cdns_sierra_phy_probe(struct platform_device *pdev)
if (sp->num_lanes > SIERRA_MAX_LANES) {
ret = -EINVAL;
dev_err(dev, "Invalid lane configuration\n");
- goto put_child2;
+ goto put_control;
}
/* If more than one subnode, configure the PHY as multilink */
if (!sp->autoconf && sp->nsubnodes > 1) {
ret = cdns_sierra_phy_configure_multilink(sp);
if (ret)
- goto put_child2;
+ goto put_control;
}
pm_runtime_enable(dev);
phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
- return PTR_ERR_OR_ZERO(phy_provider);
-
-put_child:
- node++;
-put_child2:
- for (i = 0; i < node; i++)
- reset_control_put(sp->phys[i].lnk_rst);
- of_node_put(child);
+ if (IS_ERR(phy_provider)) {
+ ret = PTR_ERR(phy_provider);
+ goto put_control;
+ }
+
+ return 0;
+
+put_control:
+ while (--node >= 0)
+ reset_control_put(sp->phys[node].lnk_rst);
clk_disable:
cdns_sierra_phy_disable_clocks(sp);
reset_control_assert(sp->apb_rst);
--
2.20.1
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
next reply other threads:[~2022-01-15 11:52 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-15 11:51 Dan Carpenter [this message]
2022-01-15 11:51 ` [PATCH] phy: cadence: Sierra: fix error handling bugs in probe() Dan Carpenter
2022-01-23 14:04 ` Vinod Koul
2022-01-23 14:04 ` Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220115115146.GC7552@kili \
--to=dan.carpenter@oracle.com \
--cc=a-govindraju@ti.com \
--cc=adouglas@cadence.com \
--cc=kernel-janitors@vger.kernel.org \
--cc=kishon@ti.com \
--cc=linux-phy@lists.infradead.org \
--cc=p.zabel@pengutronix.de \
--cc=sjakhade@cadence.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.