From: Oliver Graute <oliver.graute@gmail.com>
To: Thierry Reding <thierry.reding@gmail.com>,
Sam Ravnborg <sam@ravnborg.org>, David Airlie <airlied@linux.ie>,
Daniel Vetter <daniel@ffwll.ch>
Cc: Oliver Graute <oliver.graute@gmail.com>,
linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org
Subject: [PATCH v5] drm/panel: simple: add SGD GKTW70SDAD1SD
Date: Sun, 23 Jan 2022 16:18:31 +0100 [thread overview]
Message-ID: <20220123151833.19293-1-oliver.graute@gmail.com> (raw)
Add support for the Solomon Goldentek Display Model: GKTW70SDAD1SD
to panel-simple.
The panel spec from Variscite can be found at:
https://www.variscite.com/wp-content/uploads/2017/12/VLCD-CAP-GLD-RGB.pdf
Signed-off-by: Oliver Graute <oliver.graute@gmail.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
---
v5:
- rebased
v4:
- added the datasheet labels
- added Reviewed-by
v3:
- added flags
- added delay
v2:
- changed bpc to 6
- set max value of pixelclock
- increased hfront_porch and hback_porch
- dropped connector-type
adding of bus_format = MEDIA_BUS_FMT_RGB666_1X18 results in wrong colors.
omitting bus_format and using some default is better (Tux Pinguin is colored
fine)
drivers/gpu/drm/panel/panel-simple.c | 33 ++++++++++++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index eb475a3a774b..0fd88c3f752c 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -3065,6 +3065,36 @@ static const struct panel_desc satoz_sat050at40h12r2 = {
.connector_type = DRM_MODE_CONNECTOR_LVDS,
};
+static const struct display_timing sgd_gktw70sdad1sd_timing = {
+ .pixelclock = {30000000, 30000000, 40000000},
+ .hactive = { 800, 800, 800},
+ .hfront_porch = {40, 40, 40},
+ .hback_porch = {40, 40, 40},
+ .hsync_len = {48, 48, 48},
+ .vactive = {480, 480, 480},
+ .vfront_porch = {13, 13, 13},
+ .vback_porch = {29, 29, 29},
+ .vsync_len = {3, 3, 3},
+ .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
+ DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_NEGEDGE,
+};
+
+static const struct panel_desc sgd_gktw70sdad1sd = {
+ .timings = &sgd_gktw70sdad1sd_timing,
+ .num_timings = 1,
+ .bpc = 6,
+ .size = {
+ .width = 153,
+ .height = 86,
+ },
+ .delay = {
+ .prepare = 20 + 20 + 10 + 10, /* T0 + T2 + T3 + T4 */
+ .enable = 50, /* T5 */
+ .disable = 50, /* T5 */
+ .unprepare = 10 + 10 + 20 + 20, /* T4 + T3 + T2 + T0 */
+ },
+};
+
static const struct drm_display_mode sharp_lq070y3dg3b_mode = {
.clock = 33260,
.hdisplay = 800,
@@ -3857,6 +3887,9 @@ static const struct of_device_id platform_of_match[] = {
}, {
.compatible = "satoz,sat050at40h12r2",
.data = &satoz_sat050at40h12r2,
+ }, {
+ .compatible = "sgd,gktw70sdad1sd",
+ .data = &sgd_gktw70sdad1sd,
}, {
.compatible = "sharp,lq035q7db03",
.data = &sharp_lq035q7db03,
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Oliver Graute <oliver.graute@gmail.com>
To: Thierry Reding <thierry.reding@gmail.com>,
Sam Ravnborg <sam@ravnborg.org>, David Airlie <airlied@linux.ie>,
Daniel Vetter <daniel@ffwll.ch>
Cc: Oliver Graute <oliver.graute@gmail.com>,
dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org
Subject: [PATCH v5] drm/panel: simple: add SGD GKTW70SDAD1SD
Date: Sun, 23 Jan 2022 16:18:31 +0100 [thread overview]
Message-ID: <20220123151833.19293-1-oliver.graute@gmail.com> (raw)
Add support for the Solomon Goldentek Display Model: GKTW70SDAD1SD
to panel-simple.
The panel spec from Variscite can be found at:
https://www.variscite.com/wp-content/uploads/2017/12/VLCD-CAP-GLD-RGB.pdf
Signed-off-by: Oliver Graute <oliver.graute@gmail.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
---
v5:
- rebased
v4:
- added the datasheet labels
- added Reviewed-by
v3:
- added flags
- added delay
v2:
- changed bpc to 6
- set max value of pixelclock
- increased hfront_porch and hback_porch
- dropped connector-type
adding of bus_format = MEDIA_BUS_FMT_RGB666_1X18 results in wrong colors.
omitting bus_format and using some default is better (Tux Pinguin is colored
fine)
drivers/gpu/drm/panel/panel-simple.c | 33 ++++++++++++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index eb475a3a774b..0fd88c3f752c 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -3065,6 +3065,36 @@ static const struct panel_desc satoz_sat050at40h12r2 = {
.connector_type = DRM_MODE_CONNECTOR_LVDS,
};
+static const struct display_timing sgd_gktw70sdad1sd_timing = {
+ .pixelclock = {30000000, 30000000, 40000000},
+ .hactive = { 800, 800, 800},
+ .hfront_porch = {40, 40, 40},
+ .hback_porch = {40, 40, 40},
+ .hsync_len = {48, 48, 48},
+ .vactive = {480, 480, 480},
+ .vfront_porch = {13, 13, 13},
+ .vback_porch = {29, 29, 29},
+ .vsync_len = {3, 3, 3},
+ .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
+ DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_NEGEDGE,
+};
+
+static const struct panel_desc sgd_gktw70sdad1sd = {
+ .timings = &sgd_gktw70sdad1sd_timing,
+ .num_timings = 1,
+ .bpc = 6,
+ .size = {
+ .width = 153,
+ .height = 86,
+ },
+ .delay = {
+ .prepare = 20 + 20 + 10 + 10, /* T0 + T2 + T3 + T4 */
+ .enable = 50, /* T5 */
+ .disable = 50, /* T5 */
+ .unprepare = 10 + 10 + 20 + 20, /* T4 + T3 + T2 + T0 */
+ },
+};
+
static const struct drm_display_mode sharp_lq070y3dg3b_mode = {
.clock = 33260,
.hdisplay = 800,
@@ -3857,6 +3887,9 @@ static const struct of_device_id platform_of_match[] = {
}, {
.compatible = "satoz,sat050at40h12r2",
.data = &satoz_sat050at40h12r2,
+ }, {
+ .compatible = "sgd,gktw70sdad1sd",
+ .data = &sgd_gktw70sdad1sd,
}, {
.compatible = "sharp,lq035q7db03",
.data = &sharp_lq035q7db03,
--
2.17.1
next reply other threads:[~2022-01-23 15:19 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-23 15:18 Oliver Graute [this message]
2022-01-23 15:18 ` [PATCH v5] drm/panel: simple: add SGD GKTW70SDAD1SD Oliver Graute
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220123151833.19293-1-oliver.graute@gmail.com \
--to=oliver.graute@gmail.com \
--cc=airlied@linux.ie \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-kernel@vger.kernel.org \
--cc=sam@ravnborg.org \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.