* [PATCH v2 1/2] dt-bindings: arm: imx: add Protonic PRT8MM board compatible @ 2021-12-17 21:36 ` Lucas Stach 0 siblings, 0 replies; 6+ messages in thread From: Lucas Stach @ 2021-12-17 21:36 UTC (permalink / raw) To: Shawn Guo Cc: Pengutronix Kernel Team, NXP Linux Team, devicetree, linux-arm-kernel, patchwork-lst Add the compatible string for the Protonic PRT8MM board, which is a reference design for a low-cost agricultural terminal. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Rob Herring <robh@kernel.org> --- Documentation/devicetree/bindings/arm/fsl.yaml | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index 0b595b26061f..645ceb271405 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -732,6 +732,7 @@ properties: - gw,imx8mm-gw7902 # i.MX8MM Gateworks Board - kontron,imx8mm-n801x-som # i.MX8MM Kontron SL (N801X) SOM - variscite,var-som-mx8mm # i.MX8MM Variscite VAR-SOM-MX8MM module + - prt,prt8mm # i.MX8MM Protonic PRT8MM Board - const: fsl,imx8mm - description: Engicam i.Core MX8M Mini SoM based boards -- 2.30.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v2 1/2] dt-bindings: arm: imx: add Protonic PRT8MM board compatible @ 2021-12-17 21:36 ` Lucas Stach 0 siblings, 0 replies; 6+ messages in thread From: Lucas Stach @ 2021-12-17 21:36 UTC (permalink / raw) To: Shawn Guo Cc: Pengutronix Kernel Team, NXP Linux Team, devicetree, linux-arm-kernel, patchwork-lst Add the compatible string for the Protonic PRT8MM board, which is a reference design for a low-cost agricultural terminal. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Rob Herring <robh@kernel.org> --- Documentation/devicetree/bindings/arm/fsl.yaml | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index 0b595b26061f..645ceb271405 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -732,6 +732,7 @@ properties: - gw,imx8mm-gw7902 # i.MX8MM Gateworks Board - kontron,imx8mm-n801x-som # i.MX8MM Kontron SL (N801X) SOM - variscite,var-som-mx8mm # i.MX8MM Variscite VAR-SOM-MX8MM module + - prt,prt8mm # i.MX8MM Protonic PRT8MM Board - const: fsl,imx8mm - description: Engicam i.Core MX8M Mini SoM based boards -- 2.30.2 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v2 2/2] arm64: dts: imx: add Protonic PRT8MM board 2021-12-17 21:36 ` Lucas Stach @ 2021-12-17 21:36 ` Lucas Stach -1 siblings, 0 replies; 6+ messages in thread From: Lucas Stach @ 2021-12-17 21:36 UTC (permalink / raw) To: Shawn Guo Cc: Pengutronix Kernel Team, NXP Linux Team, devicetree, linux-arm-kernel, patchwork-lst From: David Jander <david@protonic.nl> The Protonic PRT8MM is a low-cost agricultural Virtual Terminal. This commit adds most of the board functionality sans the display output, as the i.MX8MM display support isn't ready yet. Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> --- .../boot/dts/freescale/imx8mm-prt8mm.dts | 304 ++++++++++++++++++ 1 file changed, 304 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-prt8mm.dts diff --git a/arch/arm64/boot/dts/freescale/imx8mm-prt8mm.dts b/arch/arm64/boot/dts/freescale/imx8mm-prt8mm.dts new file mode 100644 index 000000000000..13330ad67760 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-prt8mm.dts @@ -0,0 +1,304 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2020 Protonic Holland + * Copyright 2019 NXP + */ + +/dts-v1/; + +#include <dt-bindings/usb/pd.h> +#include "imx8mm.dtsi" + +/ { + model = "Protonic PRT8MM"; + compatible = "prt,prt8mm", "fsl,imx8mm"; + + chosen { + stdout-path = &uart4; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0 0x40000000>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + debug-led0 { + label = "DEBUG_LED0"; + gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + debug-led1 { + label = "DEBUG_LED1"; + gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "cpu"; + }; + }; + + sound-ssm2518 { + compatible = "simple-audio-card"; + simple-audio-card,name = "ssm2518-audio"; + simple-audio-card,format = "i2s"; + simple-audio-card,frame-master = <&cpudai>; + simple-audio-card,bitclock-master = <&cpudai>; + + cpudai: simple-audio-card,cpu { + sound-dai = <&sai3>; + }; + + simple-audio-card,codec { + sound-dai = <&ssm2518>; + clocks = <&clk IMX8MM_CLK_SAI3_ROOT>; + }; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + ssm2518: audio-codec@34 { + compatible = "adi,ssm2518"; + reg = <0x34>; + #sound-dai-cells = <0>; + }; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + regulator@60 { + compatible = "fcs,fan53555"; + reg = <0x60>; + regulator-name = "0V9_CORE"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <980000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&i2c3 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + rtc@51 { + compatible = "nxp,pcf85363"; + reg = <0x51>; + }; + + temp-sense@70 { + compatible = "ti,tmp103"; + reg = <0x70>; + }; + + touchscreeen@5d { + compatible = "goodix,gt911"; + reg = <0x5d>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touchscreen>; + interrupt-parent = <&gpio1>; + interrupts = <8 IRQ_TYPE_NONE>; + irq-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; + }; +}; + +&sai3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai3>; + assigned-clocks = <&clk IMX8MM_CLK_SAI3>; + assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>; + assigned-clock-rates = <12288000>; + fsl,sai-mclk-direction-output; + fsl,sai-asynchronous; + status = "okay"; +}; + +&snvs_pwrkey { + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1>; + dr_mode = "host"; + disable-over-current; + power-active-high; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + assigned-clocks = <&clk IMX8MM_CLK_USDHC2>; + assigned-clock-rates = <100000000>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + bus-width = <4>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + assigned-clocks = <&clk IMX8MM_CLK_USDHC3_ROOT>; + assigned-clock-rates = <400000000>; + bus-width = <8>; + non-removable; + no-sdio; + no-sd; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_gpio_leds: ledsgrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_ALE_GPIO3_IO0 0x00 + MX8MM_IOMUXC_NAND_CE0_B_GPIO3_IO1 0x00 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400000c3 + MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400000c3 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400000c3 + MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400000c3 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400000c3 + MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400000c3 + >; + }; + + pinctrl_sai3: sai3grp { + fsl,pins = < + MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6 + MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6 + MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK 0xd6 + MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6 + >; + }; + + pinctrl_touchscreen: tsgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x80 + MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x80 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX 0x040 + MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX 0x040 + >; + }; + + pinctrl_usbotg1: usbotg1grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO12_USB1_OTG_PWR 0x000 + MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x000 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x0d4 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; +}; -- 2.30.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v2 2/2] arm64: dts: imx: add Protonic PRT8MM board @ 2021-12-17 21:36 ` Lucas Stach 0 siblings, 0 replies; 6+ messages in thread From: Lucas Stach @ 2021-12-17 21:36 UTC (permalink / raw) To: Shawn Guo Cc: Pengutronix Kernel Team, NXP Linux Team, devicetree, linux-arm-kernel, patchwork-lst From: David Jander <david@protonic.nl> The Protonic PRT8MM is a low-cost agricultural Virtual Terminal. This commit adds most of the board functionality sans the display output, as the i.MX8MM display support isn't ready yet. Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> --- .../boot/dts/freescale/imx8mm-prt8mm.dts | 304 ++++++++++++++++++ 1 file changed, 304 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-prt8mm.dts diff --git a/arch/arm64/boot/dts/freescale/imx8mm-prt8mm.dts b/arch/arm64/boot/dts/freescale/imx8mm-prt8mm.dts new file mode 100644 index 000000000000..13330ad67760 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-prt8mm.dts @@ -0,0 +1,304 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2020 Protonic Holland + * Copyright 2019 NXP + */ + +/dts-v1/; + +#include <dt-bindings/usb/pd.h> +#include "imx8mm.dtsi" + +/ { + model = "Protonic PRT8MM"; + compatible = "prt,prt8mm", "fsl,imx8mm"; + + chosen { + stdout-path = &uart4; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0 0x40000000>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + debug-led0 { + label = "DEBUG_LED0"; + gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + debug-led1 { + label = "DEBUG_LED1"; + gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "cpu"; + }; + }; + + sound-ssm2518 { + compatible = "simple-audio-card"; + simple-audio-card,name = "ssm2518-audio"; + simple-audio-card,format = "i2s"; + simple-audio-card,frame-master = <&cpudai>; + simple-audio-card,bitclock-master = <&cpudai>; + + cpudai: simple-audio-card,cpu { + sound-dai = <&sai3>; + }; + + simple-audio-card,codec { + sound-dai = <&ssm2518>; + clocks = <&clk IMX8MM_CLK_SAI3_ROOT>; + }; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + ssm2518: audio-codec@34 { + compatible = "adi,ssm2518"; + reg = <0x34>; + #sound-dai-cells = <0>; + }; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + regulator@60 { + compatible = "fcs,fan53555"; + reg = <0x60>; + regulator-name = "0V9_CORE"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <980000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&i2c3 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + rtc@51 { + compatible = "nxp,pcf85363"; + reg = <0x51>; + }; + + temp-sense@70 { + compatible = "ti,tmp103"; + reg = <0x70>; + }; + + touchscreeen@5d { + compatible = "goodix,gt911"; + reg = <0x5d>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touchscreen>; + interrupt-parent = <&gpio1>; + interrupts = <8 IRQ_TYPE_NONE>; + irq-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; + }; +}; + +&sai3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai3>; + assigned-clocks = <&clk IMX8MM_CLK_SAI3>; + assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>; + assigned-clock-rates = <12288000>; + fsl,sai-mclk-direction-output; + fsl,sai-asynchronous; + status = "okay"; +}; + +&snvs_pwrkey { + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1>; + dr_mode = "host"; + disable-over-current; + power-active-high; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + assigned-clocks = <&clk IMX8MM_CLK_USDHC2>; + assigned-clock-rates = <100000000>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + bus-width = <4>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + assigned-clocks = <&clk IMX8MM_CLK_USDHC3_ROOT>; + assigned-clock-rates = <400000000>; + bus-width = <8>; + non-removable; + no-sdio; + no-sd; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_gpio_leds: ledsgrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_ALE_GPIO3_IO0 0x00 + MX8MM_IOMUXC_NAND_CE0_B_GPIO3_IO1 0x00 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400000c3 + MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400000c3 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400000c3 + MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400000c3 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400000c3 + MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400000c3 + >; + }; + + pinctrl_sai3: sai3grp { + fsl,pins = < + MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6 + MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6 + MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK 0xd6 + MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6 + >; + }; + + pinctrl_touchscreen: tsgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x80 + MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x80 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX 0x040 + MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX 0x040 + >; + }; + + pinctrl_usbotg1: usbotg1grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO12_USB1_OTG_PWR 0x000 + MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x000 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x0d4 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; +}; -- 2.30.2 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v2 2/2] arm64: dts: imx: add Protonic PRT8MM board 2021-12-17 21:36 ` Lucas Stach @ 2022-01-26 13:06 ` Shawn Guo -1 siblings, 0 replies; 6+ messages in thread From: Shawn Guo @ 2022-01-26 13:06 UTC (permalink / raw) To: Lucas Stach Cc: Pengutronix Kernel Team, NXP Linux Team, devicetree, linux-arm-kernel, patchwork-lst On Fri, Dec 17, 2021 at 10:36:17PM +0100, Lucas Stach wrote: > From: David Jander <david@protonic.nl> > > The Protonic PRT8MM is a low-cost agricultural Virtual Terminal. This > commit adds most of the board functionality sans the display output, > as the i.MX8MM display support isn't ready yet. > > Signed-off-by: David Jander <david@protonic.nl> > Signed-off-by: Lucas Stach <l.stach@pengutronix.de> > --- > .../boot/dts/freescale/imx8mm-prt8mm.dts | 304 ++++++++++++++++++ > 1 file changed, 304 insertions(+) > create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-prt8mm.dts > > diff --git a/arch/arm64/boot/dts/freescale/imx8mm-prt8mm.dts b/arch/arm64/boot/dts/freescale/imx8mm-prt8mm.dts > new file mode 100644 > index 000000000000..13330ad67760 > --- /dev/null > +++ b/arch/arm64/boot/dts/freescale/imx8mm-prt8mm.dts > @@ -0,0 +1,304 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright 2020 Protonic Holland > + * Copyright 2019 NXP > + */ > + > +/dts-v1/; > + > +#include <dt-bindings/usb/pd.h> > +#include "imx8mm.dtsi" > + > +/ { > + model = "Protonic PRT8MM"; > + compatible = "prt,prt8mm", "fsl,imx8mm"; > + > + chosen { > + stdout-path = &uart4; > + }; > + > + memory@40000000 { > + device_type = "memory"; > + reg = <0x0 0x40000000 0 0x40000000>; > + }; > + > + leds { > + compatible = "gpio-leds"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_gpio_leds>; > + > + debug-led0 { > + label = "DEBUG_LED0"; > + gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>; > + linux,default-trigger = "heartbeat"; > + }; > + > + debug-led1 { > + label = "DEBUG_LED1"; > + gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>; > + linux,default-trigger = "cpu"; > + }; > + }; > + > + sound-ssm2518 { > + compatible = "simple-audio-card"; > + simple-audio-card,name = "ssm2518-audio"; > + simple-audio-card,format = "i2s"; > + simple-audio-card,frame-master = <&cpudai>; > + simple-audio-card,bitclock-master = <&cpudai>; > + > + cpudai: simple-audio-card,cpu { > + sound-dai = <&sai3>; > + }; > + > + simple-audio-card,codec { > + sound-dai = <&ssm2518>; > + clocks = <&clk IMX8MM_CLK_SAI3_ROOT>; > + }; > + }; > +}; > + > +&i2c1 { > + clock-frequency = <400000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c1>; > + status = "okay"; > + > + ssm2518: audio-codec@34 { > + compatible = "adi,ssm2518"; > + reg = <0x34>; > + #sound-dai-cells = <0>; > + }; > +}; > + > +&i2c2 { > + clock-frequency = <400000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c2>; > + status = "okay"; > + > + regulator@60 { > + compatible = "fcs,fan53555"; > + reg = <0x60>; > + regulator-name = "0V9_CORE"; > + regulator-min-microvolt = <900000>; > + regulator-max-microvolt = <980000>; > + regulator-boot-on; > + regulator-always-on; > + }; > +}; > + > +&i2c3 { > + clock-frequency = <400000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c3>; > + status = "okay"; > + > + rtc@51 { > + compatible = "nxp,pcf85363"; > + reg = <0x51>; > + }; > + > + temp-sense@70 { > + compatible = "ti,tmp103"; > + reg = <0x70>; > + }; > + > + touchscreeen@5d { slave-address order is broken. I fixed it up and applied both. Shawn > + compatible = "goodix,gt911"; > + reg = <0x5d>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_touchscreen>; > + interrupt-parent = <&gpio1>; > + interrupts = <8 IRQ_TYPE_NONE>; > + irq-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; > + reset-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; > + }; > +}; > + > +&sai3 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_sai3>; > + assigned-clocks = <&clk IMX8MM_CLK_SAI3>; > + assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>; > + assigned-clock-rates = <12288000>; > + fsl,sai-mclk-direction-output; > + fsl,sai-asynchronous; > + status = "okay"; > +}; > + > +&snvs_pwrkey { > + status = "okay"; > +}; > + > +&uart4 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart4>; > + status = "okay"; > +}; > + > +&usbotg1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usbotg1>; > + dr_mode = "host"; > + disable-over-current; > + power-active-high; > + status = "okay"; > +}; > + > +&usdhc2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usdhc2>; > + assigned-clocks = <&clk IMX8MM_CLK_USDHC2>; > + assigned-clock-rates = <100000000>; > + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; > + bus-width = <4>; > + status = "okay"; > +}; > + > +&usdhc3 { > + pinctrl-names = "default", "state_100mhz", "state_200mhz"; > + pinctrl-0 = <&pinctrl_usdhc3>; > + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; > + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; > + assigned-clocks = <&clk IMX8MM_CLK_USDHC3_ROOT>; > + assigned-clock-rates = <400000000>; > + bus-width = <8>; > + non-removable; > + no-sdio; > + no-sd; > + status = "okay"; > +}; > + > +&wdog1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_wdog>; > + fsl,ext-reset-output; > + status = "okay"; > +}; > + > +&iomuxc { > + pinctrl_gpio_leds: ledsgrp { > + fsl,pins = < > + MX8MM_IOMUXC_NAND_ALE_GPIO3_IO0 0x00 > + MX8MM_IOMUXC_NAND_CE0_B_GPIO3_IO1 0x00 > + >; > + }; > + > + pinctrl_i2c1: i2c1grp { > + fsl,pins = < > + MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400000c3 > + MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400000c3 > + >; > + }; > + > + pinctrl_i2c2: i2c2grp { > + fsl,pins = < > + MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400000c3 > + MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400000c3 > + >; > + }; > + > + pinctrl_i2c3: i2c3grp { > + fsl,pins = < > + MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400000c3 > + MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400000c3 > + >; > + }; > + > + pinctrl_sai3: sai3grp { > + fsl,pins = < > + MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6 > + MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6 > + MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK 0xd6 > + MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6 > + >; > + }; > + > + pinctrl_touchscreen: tsgrp { > + fsl,pins = < > + MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x80 > + MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x80 > + >; > + }; > + > + pinctrl_uart4: uart4grp { > + fsl,pins = < > + MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX 0x040 > + MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX 0x040 > + >; > + }; > + > + pinctrl_usbotg1: usbotg1grp { > + fsl,pins = < > + MX8MM_IOMUXC_GPIO1_IO12_USB1_OTG_PWR 0x000 > + MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x000 > + >; > + }; > + > + pinctrl_usdhc2: usdhc2grp { > + fsl,pins = < > + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 > + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 > + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 > + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 > + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 > + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 > + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x0d4 > + >; > + }; > + > + pinctrl_usdhc3: usdhc3grp { > + fsl,pins = < > + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190 > + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0 > + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0 > + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0 > + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 > + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0 > + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0 > + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0 > + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0 > + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0 > + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190 > + >; > + }; > + > + pinctrl_usdhc3_100mhz: usdhc3grp100mhz { > + fsl,pins = < > + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194 > + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 > + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 > + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 > + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 > + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 > + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4 > + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4 > + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4 > + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4 > + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194 > + >; > + }; > + > + pinctrl_usdhc3_200mhz: usdhc3grp200mhz { > + fsl,pins = < > + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196 > + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 > + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6 > + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6 > + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6 > + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6 > + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6 > + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6 > + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6 > + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6 > + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196 > + >; > + }; > + > + pinctrl_wdog: wdoggrp { > + fsl,pins = < > + MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 > + >; > + }; > +}; > -- > 2.30.2 > _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v2 2/2] arm64: dts: imx: add Protonic PRT8MM board @ 2022-01-26 13:06 ` Shawn Guo 0 siblings, 0 replies; 6+ messages in thread From: Shawn Guo @ 2022-01-26 13:06 UTC (permalink / raw) To: Lucas Stach Cc: Pengutronix Kernel Team, NXP Linux Team, devicetree, linux-arm-kernel, patchwork-lst On Fri, Dec 17, 2021 at 10:36:17PM +0100, Lucas Stach wrote: > From: David Jander <david@protonic.nl> > > The Protonic PRT8MM is a low-cost agricultural Virtual Terminal. This > commit adds most of the board functionality sans the display output, > as the i.MX8MM display support isn't ready yet. > > Signed-off-by: David Jander <david@protonic.nl> > Signed-off-by: Lucas Stach <l.stach@pengutronix.de> > --- > .../boot/dts/freescale/imx8mm-prt8mm.dts | 304 ++++++++++++++++++ > 1 file changed, 304 insertions(+) > create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-prt8mm.dts > > diff --git a/arch/arm64/boot/dts/freescale/imx8mm-prt8mm.dts b/arch/arm64/boot/dts/freescale/imx8mm-prt8mm.dts > new file mode 100644 > index 000000000000..13330ad67760 > --- /dev/null > +++ b/arch/arm64/boot/dts/freescale/imx8mm-prt8mm.dts > @@ -0,0 +1,304 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright 2020 Protonic Holland > + * Copyright 2019 NXP > + */ > + > +/dts-v1/; > + > +#include <dt-bindings/usb/pd.h> > +#include "imx8mm.dtsi" > + > +/ { > + model = "Protonic PRT8MM"; > + compatible = "prt,prt8mm", "fsl,imx8mm"; > + > + chosen { > + stdout-path = &uart4; > + }; > + > + memory@40000000 { > + device_type = "memory"; > + reg = <0x0 0x40000000 0 0x40000000>; > + }; > + > + leds { > + compatible = "gpio-leds"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_gpio_leds>; > + > + debug-led0 { > + label = "DEBUG_LED0"; > + gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>; > + linux,default-trigger = "heartbeat"; > + }; > + > + debug-led1 { > + label = "DEBUG_LED1"; > + gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>; > + linux,default-trigger = "cpu"; > + }; > + }; > + > + sound-ssm2518 { > + compatible = "simple-audio-card"; > + simple-audio-card,name = "ssm2518-audio"; > + simple-audio-card,format = "i2s"; > + simple-audio-card,frame-master = <&cpudai>; > + simple-audio-card,bitclock-master = <&cpudai>; > + > + cpudai: simple-audio-card,cpu { > + sound-dai = <&sai3>; > + }; > + > + simple-audio-card,codec { > + sound-dai = <&ssm2518>; > + clocks = <&clk IMX8MM_CLK_SAI3_ROOT>; > + }; > + }; > +}; > + > +&i2c1 { > + clock-frequency = <400000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c1>; > + status = "okay"; > + > + ssm2518: audio-codec@34 { > + compatible = "adi,ssm2518"; > + reg = <0x34>; > + #sound-dai-cells = <0>; > + }; > +}; > + > +&i2c2 { > + clock-frequency = <400000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c2>; > + status = "okay"; > + > + regulator@60 { > + compatible = "fcs,fan53555"; > + reg = <0x60>; > + regulator-name = "0V9_CORE"; > + regulator-min-microvolt = <900000>; > + regulator-max-microvolt = <980000>; > + regulator-boot-on; > + regulator-always-on; > + }; > +}; > + > +&i2c3 { > + clock-frequency = <400000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c3>; > + status = "okay"; > + > + rtc@51 { > + compatible = "nxp,pcf85363"; > + reg = <0x51>; > + }; > + > + temp-sense@70 { > + compatible = "ti,tmp103"; > + reg = <0x70>; > + }; > + > + touchscreeen@5d { slave-address order is broken. I fixed it up and applied both. Shawn > + compatible = "goodix,gt911"; > + reg = <0x5d>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_touchscreen>; > + interrupt-parent = <&gpio1>; > + interrupts = <8 IRQ_TYPE_NONE>; > + irq-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; > + reset-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; > + }; > +}; > + > +&sai3 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_sai3>; > + assigned-clocks = <&clk IMX8MM_CLK_SAI3>; > + assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>; > + assigned-clock-rates = <12288000>; > + fsl,sai-mclk-direction-output; > + fsl,sai-asynchronous; > + status = "okay"; > +}; > + > +&snvs_pwrkey { > + status = "okay"; > +}; > + > +&uart4 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart4>; > + status = "okay"; > +}; > + > +&usbotg1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usbotg1>; > + dr_mode = "host"; > + disable-over-current; > + power-active-high; > + status = "okay"; > +}; > + > +&usdhc2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usdhc2>; > + assigned-clocks = <&clk IMX8MM_CLK_USDHC2>; > + assigned-clock-rates = <100000000>; > + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; > + bus-width = <4>; > + status = "okay"; > +}; > + > +&usdhc3 { > + pinctrl-names = "default", "state_100mhz", "state_200mhz"; > + pinctrl-0 = <&pinctrl_usdhc3>; > + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; > + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; > + assigned-clocks = <&clk IMX8MM_CLK_USDHC3_ROOT>; > + assigned-clock-rates = <400000000>; > + bus-width = <8>; > + non-removable; > + no-sdio; > + no-sd; > + status = "okay"; > +}; > + > +&wdog1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_wdog>; > + fsl,ext-reset-output; > + status = "okay"; > +}; > + > +&iomuxc { > + pinctrl_gpio_leds: ledsgrp { > + fsl,pins = < > + MX8MM_IOMUXC_NAND_ALE_GPIO3_IO0 0x00 > + MX8MM_IOMUXC_NAND_CE0_B_GPIO3_IO1 0x00 > + >; > + }; > + > + pinctrl_i2c1: i2c1grp { > + fsl,pins = < > + MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400000c3 > + MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400000c3 > + >; > + }; > + > + pinctrl_i2c2: i2c2grp { > + fsl,pins = < > + MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400000c3 > + MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400000c3 > + >; > + }; > + > + pinctrl_i2c3: i2c3grp { > + fsl,pins = < > + MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400000c3 > + MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400000c3 > + >; > + }; > + > + pinctrl_sai3: sai3grp { > + fsl,pins = < > + MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6 > + MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6 > + MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK 0xd6 > + MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6 > + >; > + }; > + > + pinctrl_touchscreen: tsgrp { > + fsl,pins = < > + MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x80 > + MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x80 > + >; > + }; > + > + pinctrl_uart4: uart4grp { > + fsl,pins = < > + MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX 0x040 > + MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX 0x040 > + >; > + }; > + > + pinctrl_usbotg1: usbotg1grp { > + fsl,pins = < > + MX8MM_IOMUXC_GPIO1_IO12_USB1_OTG_PWR 0x000 > + MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x000 > + >; > + }; > + > + pinctrl_usdhc2: usdhc2grp { > + fsl,pins = < > + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 > + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 > + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 > + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 > + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 > + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 > + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x0d4 > + >; > + }; > + > + pinctrl_usdhc3: usdhc3grp { > + fsl,pins = < > + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190 > + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0 > + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0 > + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0 > + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 > + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0 > + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0 > + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0 > + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0 > + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0 > + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190 > + >; > + }; > + > + pinctrl_usdhc3_100mhz: usdhc3grp100mhz { > + fsl,pins = < > + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194 > + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 > + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 > + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 > + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 > + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 > + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4 > + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4 > + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4 > + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4 > + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194 > + >; > + }; > + > + pinctrl_usdhc3_200mhz: usdhc3grp200mhz { > + fsl,pins = < > + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196 > + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 > + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6 > + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6 > + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6 > + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6 > + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6 > + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6 > + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6 > + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6 > + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196 > + >; > + }; > + > + pinctrl_wdog: wdoggrp { > + fsl,pins = < > + MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 > + >; > + }; > +}; > -- > 2.30.2 > ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2022-01-26 13:08 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2021-12-17 21:36 [PATCH v2 1/2] dt-bindings: arm: imx: add Protonic PRT8MM board compatible Lucas Stach 2021-12-17 21:36 ` Lucas Stach 2021-12-17 21:36 ` [PATCH v2 2/2] arm64: dts: imx: add Protonic PRT8MM board Lucas Stach 2021-12-17 21:36 ` Lucas Stach 2022-01-26 13:06 ` Shawn Guo 2022-01-26 13:06 ` Shawn Guo
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.