From: Jisheng Zhang <jszhang@kernel.org>
To: Giuseppe Cavallaro <peppe.cavallaro@st.com>,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
Jose Abreu <joabreu@synopsys.com>,
"David S . Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: netdev@vger.kernel.org, linux-sunxi@lists.linux.dev,
linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH net-next] net: stmmac: dwmac-sun8i: make clk really gated during rpm suspended
Date: Fri, 28 Jan 2022 22:52:13 +0800 [thread overview]
Message-ID: <20220128145213.2454-1-jszhang@kernel.org> (raw)
Currently, the dwmac-sun8i's stmmaceth clk isn't disabled even if the
the device has been runtime suspended. The reason is the driver gets
the "stmmaceth" clk as tx_clk and enabling it during probe. But
there's no other usage of tx_clk except preparing and enabling, so
we can remove tx_clk and its usage then rely on the common routine
stmmac_probe_config_dt() to prepare and enable the stmmaceth clk
during driver initialization, and benefit from the runtime pm feature
after probed.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
---
.../net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 30 +++++++------------
1 file changed, 11 insertions(+), 19 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
index 09644ab0d87a..f86cc83003f2 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
@@ -16,6 +16,7 @@
#include <linux/of_net.h>
#include <linux/phy.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/regulator/consumer.h>
#include <linux/regmap.h>
#include <linux/stmmac.h>
@@ -57,7 +58,6 @@ struct emac_variant {
};
/* struct sunxi_priv_data - hold all sunxi private data
- * @tx_clk: reference to MAC TX clock
* @ephy_clk: reference to the optional EPHY clock for the internal PHY
* @regulator: reference to the optional regulator
* @rst_ephy: reference to the optional EPHY reset for the internal PHY
@@ -68,7 +68,6 @@ struct emac_variant {
* @mux_handle: Internal pointer used by mdio-mux lib
*/
struct sunxi_priv_data {
- struct clk *tx_clk;
struct clk *ephy_clk;
struct regulator *regulator;
struct reset_control *rst_ephy;
@@ -579,22 +578,14 @@ static int sun8i_dwmac_init(struct platform_device *pdev, void *priv)
}
}
- ret = clk_prepare_enable(gmac->tx_clk);
- if (ret) {
- dev_err(&pdev->dev, "Could not enable AHB clock\n");
- goto err_disable_regulator;
- }
-
if (gmac->use_internal_phy) {
ret = sun8i_dwmac_power_internal_phy(netdev_priv(ndev));
if (ret)
- goto err_disable_clk;
+ goto err_disable_regulator;
}
return 0;
-err_disable_clk:
- clk_disable_unprepare(gmac->tx_clk);
err_disable_regulator:
if (gmac->regulator)
regulator_disable(gmac->regulator);
@@ -1043,8 +1034,6 @@ static void sun8i_dwmac_exit(struct platform_device *pdev, void *priv)
if (gmac->variant->soc_has_internal_phy)
sun8i_dwmac_unpower_internal_phy(gmac);
- clk_disable_unprepare(gmac->tx_clk);
-
if (gmac->regulator)
regulator_disable(gmac->regulator);
}
@@ -1167,12 +1156,6 @@ static int sun8i_dwmac_probe(struct platform_device *pdev)
return -EINVAL;
}
- gmac->tx_clk = devm_clk_get(dev, "stmmaceth");
- if (IS_ERR(gmac->tx_clk)) {
- dev_err(dev, "Could not get TX clock\n");
- return PTR_ERR(gmac->tx_clk);
- }
-
/* Optional regulator for PHY */
gmac->regulator = devm_regulator_get_optional(dev, "phy");
if (IS_ERR(gmac->regulator)) {
@@ -1254,6 +1237,12 @@ static int sun8i_dwmac_probe(struct platform_device *pdev)
ndev = dev_get_drvdata(&pdev->dev);
priv = netdev_priv(ndev);
+ /* the MAC is runtime suspended after stmmac_dvr_probe(), so we
+ * need to ensure the MAC resume back before other operations such
+ * as reset.
+ */
+ pm_runtime_get_sync(&pdev->dev);
+
/* The mux must be registered after parent MDIO
* so after stmmac_dvr_probe()
*/
@@ -1272,12 +1261,15 @@ static int sun8i_dwmac_probe(struct platform_device *pdev)
goto dwmac_remove;
}
+ pm_runtime_put(&pdev->dev);
+
return 0;
dwmac_mux:
reset_control_put(gmac->rst_ephy);
clk_put(gmac->ephy_clk);
dwmac_remove:
+ pm_runtime_put_noidle(&pdev->dev);
stmmac_dvr_remove(&pdev->dev);
dwmac_exit:
sun8i_dwmac_exit(pdev, gmac);
--
2.34.1
WARNING: multiple messages have this Message-ID (diff)
From: Jisheng Zhang <jszhang@kernel.org>
To: Giuseppe Cavallaro <peppe.cavallaro@st.com>,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
Jose Abreu <joabreu@synopsys.com>,
"David S . Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: netdev@vger.kernel.org, linux-sunxi@lists.linux.dev,
linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH net-next] net: stmmac: dwmac-sun8i: make clk really gated during rpm suspended
Date: Fri, 28 Jan 2022 22:52:13 +0800 [thread overview]
Message-ID: <20220128145213.2454-1-jszhang@kernel.org> (raw)
Currently, the dwmac-sun8i's stmmaceth clk isn't disabled even if the
the device has been runtime suspended. The reason is the driver gets
the "stmmaceth" clk as tx_clk and enabling it during probe. But
there's no other usage of tx_clk except preparing and enabling, so
we can remove tx_clk and its usage then rely on the common routine
stmmac_probe_config_dt() to prepare and enable the stmmaceth clk
during driver initialization, and benefit from the runtime pm feature
after probed.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
---
.../net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 30 +++++++------------
1 file changed, 11 insertions(+), 19 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
index 09644ab0d87a..f86cc83003f2 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
@@ -16,6 +16,7 @@
#include <linux/of_net.h>
#include <linux/phy.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/regulator/consumer.h>
#include <linux/regmap.h>
#include <linux/stmmac.h>
@@ -57,7 +58,6 @@ struct emac_variant {
};
/* struct sunxi_priv_data - hold all sunxi private data
- * @tx_clk: reference to MAC TX clock
* @ephy_clk: reference to the optional EPHY clock for the internal PHY
* @regulator: reference to the optional regulator
* @rst_ephy: reference to the optional EPHY reset for the internal PHY
@@ -68,7 +68,6 @@ struct emac_variant {
* @mux_handle: Internal pointer used by mdio-mux lib
*/
struct sunxi_priv_data {
- struct clk *tx_clk;
struct clk *ephy_clk;
struct regulator *regulator;
struct reset_control *rst_ephy;
@@ -579,22 +578,14 @@ static int sun8i_dwmac_init(struct platform_device *pdev, void *priv)
}
}
- ret = clk_prepare_enable(gmac->tx_clk);
- if (ret) {
- dev_err(&pdev->dev, "Could not enable AHB clock\n");
- goto err_disable_regulator;
- }
-
if (gmac->use_internal_phy) {
ret = sun8i_dwmac_power_internal_phy(netdev_priv(ndev));
if (ret)
- goto err_disable_clk;
+ goto err_disable_regulator;
}
return 0;
-err_disable_clk:
- clk_disable_unprepare(gmac->tx_clk);
err_disable_regulator:
if (gmac->regulator)
regulator_disable(gmac->regulator);
@@ -1043,8 +1034,6 @@ static void sun8i_dwmac_exit(struct platform_device *pdev, void *priv)
if (gmac->variant->soc_has_internal_phy)
sun8i_dwmac_unpower_internal_phy(gmac);
- clk_disable_unprepare(gmac->tx_clk);
-
if (gmac->regulator)
regulator_disable(gmac->regulator);
}
@@ -1167,12 +1156,6 @@ static int sun8i_dwmac_probe(struct platform_device *pdev)
return -EINVAL;
}
- gmac->tx_clk = devm_clk_get(dev, "stmmaceth");
- if (IS_ERR(gmac->tx_clk)) {
- dev_err(dev, "Could not get TX clock\n");
- return PTR_ERR(gmac->tx_clk);
- }
-
/* Optional regulator for PHY */
gmac->regulator = devm_regulator_get_optional(dev, "phy");
if (IS_ERR(gmac->regulator)) {
@@ -1254,6 +1237,12 @@ static int sun8i_dwmac_probe(struct platform_device *pdev)
ndev = dev_get_drvdata(&pdev->dev);
priv = netdev_priv(ndev);
+ /* the MAC is runtime suspended after stmmac_dvr_probe(), so we
+ * need to ensure the MAC resume back before other operations such
+ * as reset.
+ */
+ pm_runtime_get_sync(&pdev->dev);
+
/* The mux must be registered after parent MDIO
* so after stmmac_dvr_probe()
*/
@@ -1272,12 +1261,15 @@ static int sun8i_dwmac_probe(struct platform_device *pdev)
goto dwmac_remove;
}
+ pm_runtime_put(&pdev->dev);
+
return 0;
dwmac_mux:
reset_control_put(gmac->rst_ephy);
clk_put(gmac->ephy_clk);
dwmac_remove:
+ pm_runtime_put_noidle(&pdev->dev);
stmmac_dvr_remove(&pdev->dev);
dwmac_exit:
sun8i_dwmac_exit(pdev, gmac);
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2022-01-28 14:59 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-28 14:52 Jisheng Zhang [this message]
2022-01-28 14:52 ` [PATCH net-next] net: stmmac: dwmac-sun8i: make clk really gated during rpm suspended Jisheng Zhang
2022-01-28 15:20 ` patchwork-bot+netdevbpf
2022-01-28 15:20 ` patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220128145213.2454-1-jszhang@kernel.org \
--to=jszhang@kernel.org \
--cc=alexandre.torgue@foss.st.com \
--cc=davem@davemloft.net \
--cc=jernej.skrabec@gmail.com \
--cc=joabreu@synopsys.com \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=linux-sunxi@lists.linux.dev \
--cc=mcoquelin.stm32@gmail.com \
--cc=mripard@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=peppe.cavallaro@st.com \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.