dev-rhel90-4 - make: generate

dev-rhel90-4 - make: generate

[Marian Csontos]

Gitweb:        https://sourceware.org/git/?p=lvm2.git;a=commitdiff;h=4a1f6173d29a7d7ecab14a9313000aa5f81170d0
Commit:        4a1f6173d29a7d7ecab14a9313000aa5f81170d0
Parent:        61706793deed8954e42f178162d22416f61537b2
Author:        Marian Csontos <mcsontos@redhat.com>
AuthorDate:    Tue Feb 8 15:29:23 2022 +0100
Committer:     Marian Csontos <mcsontos@redhat.com>
CommitterDate: Tue Feb 8 15:29:23 2022 +0100

make: generate

---
 conf/example.conf.in    | 15 ++++------
 man/lvdisplay.8_pregen  | 12 --------
 man/lvmdevices.8_pregen |  3 +-
 man/pvdisplay.8_pregen  | 12 --------
 man/pvscan.8_pregen     | 77 ++++++++++++++++++++++++++-----------------------
 man/vgchange.8_pregen   | 12 ++++++++
 man/vgdisplay.8_pregen  | 12 --------
 7 files changed, 60 insertions(+), 83 deletions(-)

diff --git a/conf/example.conf.in b/conf/example.conf.in
index a78ed7333..94f7a23fd 100644
--- a/conf/example.conf.in
+++ b/conf/example.conf.in
@@ -1151,16 +1151,11 @@ global {
 	# lvdisplay_shows_full_device_path = 0
 
 	# Configuration option global/event_activation.
-	# Activate LVs based on system-generated device events.
-	# When a PV appears on the system, a system-generated uevent triggers
-	# the lvm2-pvscan service which runs the pvscan --cache -aay command.
-	# If the new PV completes a VG, pvscan autoactivates LVs in the VG.
-	# When event_activation is disabled, the lvm2-activation services are
-	# generated and run at fixed points during system startup.  These
-	# services run vgchange -aay to autoactivate LVs in VGs that happen
-	# to be present at that point in time.
-	# See the --setautoactivation option or the auto_activation_volume_list
-	# setting to configure autoactivation for specific VGs or LVs.
+	# Disable event based autoactivation commands.
+	# WARNING: setting this to zero may cause machine startup to fail.
+	# Previously, setting this to zero would enable static autoactivation
+	# services (via the lvm2-activation-generator), but the autoactivation
+	# services and generator have been removed.
 	# This configuration option has an automatic default value.
 	# event_activation = 1
 
diff --git a/man/lvdisplay.8_pregen b/man/lvdisplay.8_pregen
index a1740ebed..04aab4c09 100644
--- a/man/lvdisplay.8_pregen
+++ b/man/lvdisplay.8_pregen
@@ -61,8 +61,6 @@ and more, using a more compact and configurable output format.
 .br
 [    \fB--readonly\fP ]
 .br
-[    \fB--reportformat\fP \fBbasic\fP|\fBjson\fP ]
-.br
 [    \fB--segments\fP ]
 .br
 [    \fB--separator\fP \fIString\fP ]
@@ -332,16 +330,6 @@ device-mapper kernel driver, so this option is unable to report whether
 or not LVs are actually in use.
 .
 .HP
-\fB--reportformat\fP \fBbasic\fP|\fBjson\fP
-.br
-Overrides current output format for reports which is defined globally by
-the report/output_format setting in \fBlvm.conf\fP(5).
-\fBbasic\fP is the original format with columns and rows.
-If there is more than one report per command, each report is prefixed
-with the report name for identification. \fBjson\fP produces report
-output in JSON format. See \fBlvmreport\fP(7) for more information.
-.
-.HP
 \fB--segments\fP
 .br
 .
diff --git a/man/lvmdevices.8_pregen b/man/lvmdevices.8_pregen
index d64c3a31a..a2391a62b 100644
--- a/man/lvmdevices.8_pregen
+++ b/man/lvmdevices.8_pregen
@@ -322,7 +322,8 @@ Find a device with the PVID and add the device to the devices file.
 .HP
 \fB--check\fP
 .br
-Check the content of the devices file.
+Checks the content of the devices file.
+Reports incorrect device names or PVIDs for entries.
 .
 .HP
 \fB--commandprofile\fP \fIString\fP
diff --git a/man/pvdisplay.8_pregen b/man/pvdisplay.8_pregen
index 22a0992b5..2f26a8727 100644
--- a/man/pvdisplay.8_pregen
+++ b/man/pvdisplay.8_pregen
@@ -61,8 +61,6 @@ and more, using a more compact and configurable output format.
 .br
 [    \fB--readonly\fP ]
 .br
-[    \fB--reportformat\fP \fBbasic\fP|\fBjson\fP ]
-.br
 [    \fB--separator\fP \fIString\fP ]
 .br
 [    \fB--shared\fP ]
@@ -320,16 +318,6 @@ device-mapper kernel driver, so this option is unable to report whether
 or not LVs are actually in use.
 .
 .HP
-\fB--reportformat\fP \fBbasic\fP|\fBjson\fP
-.br
-Overrides current output format for reports which is defined globally by
-the report/output_format setting in \fBlvm.conf\fP(5).
-\fBbasic\fP is the original format with columns and rows.
-If there is more than one report per command, each report is prefixed
-with the report name for identification. \fBjson\fP produces report
-output in JSON format. See \fBlvmreport\fP(7) for more information.
-.
-.HP
 \fB-S\fP|\fB--select\fP \fIString\fP
 .br
 Select objects for processing and reporting based on specified criteria.
diff --git a/man/pvscan.8_pregen b/man/pvscan.8_pregen
index 9eb6b5bf9..4622e145e 100644
--- a/man/pvscan.8_pregen
+++ b/man/pvscan.8_pregen
@@ -15,6 +15,8 @@ pvscan \(em List all physical volumes
 .P
 .ad l
  \fB-a\fP|\fB--activate\fP \fBy\fP|\fBn\fP|\fBay\fP
+.br
+    \fB--autoactivation\fP \fIString\fP
 .br
     \fB--cache\fP
 .br
@@ -91,59 +93,50 @@ like
 or
 .BR pvdisplay (8).
 .P
-When the --cache and -aay options are used, pvscan records which PVs are
-available on the system, and activates LVs in completed VGs.  A VG is
-complete when pvscan sees that the final PV in the VG has appeared.  This
-is used by event-based system startup (systemd, udev) to activate LVs.
-.P
-The four main variations of this are:
+When --cache is used, pvscan updates runtime lvm state on the system, or
+with -aay performs autoactivation.
 .P
 .B pvscan --cache
 .I device
 .P
-If device is present, lvm adds a record that the PV on device is online.
+If device is present, lvm records that the PV on device is online.
 If device is not present, lvm removes the online record for the PV.
-In most cases, the pvscan will only read the named devices.
+pvscan only reads the named device.
 .P
-.B pvscan --cache -aay
-.IR device ...
+.B pvscan --cache
 .P
-This begins by performing the same steps as above.  Afterward, if the VG
-for the specified PV is complete, then pvscan will activate LVs in the VG
-(the same as vgchange -aay vgname would do.)
+Updates the runtime state for all lvm devices.
 .P
-.B pvscan --cache
+.B pvscan --cache -aay
+.I device
 .P
-This first clears all existing PV online records, then scans all devices
-on the system, adding PV online records for any PVs that are found.
+Performs the --cache steps for the device, then checks if the VG using the
+device is complete.  If so, LVs in the VG are autoactivated, the same as
+vgchange -aay vgname would do.  (A device name may be replaced with major
+and minor numbers.)
 .P
 .B pvscan --cache -aay
 .P
-This begins by performing the same steps as pvscan --cache.  Afterward, it
-activates LVs in any complete VGs.
+Performs the --cache steps for all devices, then autoactivates any complete VGs.
 .P
-To prevent devices from being scanned by pvscan --cache, add them
-to
-.BR lvm.conf (5)
-.B devices/global_filter.
-For more information, see:
-.br
-.B lvmconfig --withcomments devices/global_filter
+.B pvscan --cache --listvg|--listlvs
+.I device
 .P
-Auto-activation of VGs or LVs can be enabled/disabled using:
-.br
+Performs the --cache steps for the device, then prints the name of the VG
+using the device, or the names of LVs using the device.  --checkcomplete
+is usually included to check if all PVs for the VG or LVs are online.
+When this command is called by a udev rule, the output must conform to
+udev rule specifications (see --udevoutput.)  The udev rule will use the
+results to perform autoactivation.
+.P
+Autoactivation of VGs or LVs can be enabled/disabled using vgchange or
+lvchange with --setautoactivation y|n, or by adding names to
 .BR lvm.conf (5)
 .B activation/auto_activation_volume_list
 .P
-For more information, see:
-.br
-.B lvmconfig --withcomments activation/auto_activation_volume_list
-.P
-To disable auto-activation, explicitly set this list to an empty list,
-i.e. auto_activation_volume_list = [ ].
-.P
-When this setting is undefined (e.g. commented), then all LVs are
-auto-activated.
+See
+.BR lvmautoactivation (7)
+for more information about how pvscan is used for autoactivation.
 .
 .SH USAGE
 .
@@ -215,6 +208,8 @@ Record that a PV is online and autoactivate the VG if complete.
 .br
 [    \fB--noudevsync\fP ]
 .br
+[    \fB--autoactivation\fP \fIString\fP ]
+.br
 [ COMMON_OPTIONS ]
 .ad b
 .RE
@@ -239,6 +234,8 @@ Record that a PV is online and list the VG using the PV.
 .br
 [    \fB--udevoutput\fP ]
 .br
+[    \fB--autoactivation\fP \fIString\fP ]
+.br
 [ COMMON_OPTIONS ]
 .ad b
 .RE
@@ -342,6 +339,14 @@ Auto-activate LVs in a VG when the PVs scanned have completed the VG.
 (Only \fBay\fP is applicable.)
 .
 .HP
+\fB--autoactivation\fP \fIString\fP
+.br
+Specify if autoactivation is being used from an event.
+This allows the command to apply settings that are specific
+to event activation, such as device scanning optimizations
+using pvs_online files created by event-based pvscans.
+.
+.HP
 \fB--cache\fP
 .br
 Scan one or more devices and record that they are online.
diff --git a/man/vgchange.8_pregen b/man/vgchange.8_pregen
index 05c67aead..9dbad3faa 100644
--- a/man/vgchange.8_pregen
+++ b/man/vgchange.8_pregen
@@ -24,6 +24,8 @@ vgchange \(em Change volume group attributes
 .nh
 \%\fBcontiguous\fP|\:\fBcling\fP|\:\fBcling_by_tags\fP|\:\fBnormal\fP|\:\fBanywhere\fP|\:\fBinherit\fP
 .hy
+.br
+    \fB--autoactivation\fP \fIString\fP
 .br
  \fB-A\fP|\fB--autobackup\fP \fBy\fP|\fBn\fP
 .br
@@ -286,6 +288,8 @@ Activate or deactivate LVs.
 .br
 [    \fB--poll\fP \fBy\fP|\fBn\fP ]
 .br
+[    \fB--autoactivation\fP \fIString\fP ]
+.br
 [    \fB--ignoremonitoring\fP ]
 .br
 [    \fB--noudevsync\fP ]
@@ -516,6 +520,14 @@ which PVs the command will use for allocation.
 See \fBlvm\fP(8) for more information about allocation.
 .
 .HP
+\fB--autoactivation\fP \fIString\fP
+.br
+Specify if autoactivation is being used from an event.
+This allows the command to apply settings that are specific
+to event activation, such as device scanning optimizations
+using pvs_online files created by event-based pvscans.
+.
+.HP
 \fB-A\fP|\fB--autobackup\fP \fBy\fP|\fBn\fP
 .br
 Specifies if metadata should be backed up automatically after a change.
diff --git a/man/vgdisplay.8_pregen b/man/vgdisplay.8_pregen
index 9c694921d..0a12b3c39 100644
--- a/man/vgdisplay.8_pregen
+++ b/man/vgdisplay.8_pregen
@@ -58,8 +58,6 @@ and more, using a more compact and configurable output format.
 .br
 [    \fB--readonly\fP ]
 .br
-[    \fB--reportformat\fP \fBbasic\fP|\fBjson\fP ]
-.br
 [    \fB--shared\fP ]
 .br
 [    \fB--separator\fP \fIString\fP ]
@@ -312,16 +310,6 @@ device-mapper kernel driver, so this option is unable to report whether
 or not LVs are actually in use.
 .
 .HP
-\fB--reportformat\fP \fBbasic\fP|\fBjson\fP
-.br
-Overrides current output format for reports which is defined globally by
-the report/output_format setting in \fBlvm.conf\fP(5).
-\fBbasic\fP is the original format with columns and rows.
-If there is more than one report per command, each report is prefixed
-with the report name for identification. \fBjson\fP produces report
-output in JSON format. See \fBlvmreport\fP(7) for more information.
-.
-.HP
 \fB-S\fP|\fB--select\fP \fIString\fP
 .br
 Select objects for processing and reporting based on specified criteria.