From: "Marek Behún" <kabel@kernel.org>
To: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
Bjorn Helgaas <helgaas@kernel.org>
Cc: "Krzysztof Wilczyński" <kw@linux.com>,
"Marc Zyngier" <maz@kernel.org>,
pali@kernel.org, linux-pci@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
"Gregory CLEMENT" <gregory.clement@bootlin.com>,
"Marek Behún" <kabel@kernel.org>
Subject: [PATCH 04/18] PCI: Add PCI_EXP_SLTCAP_*_SHIFT macros
Date: Sun, 20 Feb 2022 20:33:32 +0100 [thread overview]
Message-ID: <20220220193346.23789-5-kabel@kernel.org> (raw)
In-Reply-To: <20220220193346.23789-1-kabel@kernel.org>
From: Pali Rohár <pali@kernel.org>
These macros allows to easily compose and extract Slot Power Limit and
Physical Slot Number values from Slot Capability Register.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
---
include/uapi/linux/pci_regs.h | 3 +++
1 file changed, 3 insertions(+)
diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h
index bee1a9ed6e66..d825e17e448c 100644
--- a/include/uapi/linux/pci_regs.h
+++ b/include/uapi/linux/pci_regs.h
@@ -591,10 +591,13 @@
#define PCI_EXP_SLTCAP_HPS 0x00000020 /* Hot-Plug Surprise */
#define PCI_EXP_SLTCAP_HPC 0x00000040 /* Hot-Plug Capable */
#define PCI_EXP_SLTCAP_SPLV 0x00007f80 /* Slot Power Limit Value */
+#define PCI_EXP_SLTCAP_SPLV_SHIFT 7 /* Slot Power Limit Value shift */
#define PCI_EXP_SLTCAP_SPLS 0x00018000 /* Slot Power Limit Scale */
+#define PCI_EXP_SLTCAP_SPLS_SHIFT 15 /* Slot Power Limit Scale shift */
#define PCI_EXP_SLTCAP_EIP 0x00020000 /* Electromechanical Interlock Present */
#define PCI_EXP_SLTCAP_NCCS 0x00040000 /* No Command Completed Support */
#define PCI_EXP_SLTCAP_PSN 0xfff80000 /* Physical Slot Number */
+#define PCI_EXP_SLTCAP_PSN_SHIFT 19 /* Physical Slot Number shift */
#define PCI_EXP_SLTCTL 0x18 /* Slot Control */
#define PCI_EXP_SLTCTL_ABPE 0x0001 /* Attention Button Pressed Enable */
#define PCI_EXP_SLTCTL_PFDE 0x0002 /* Power Fault Detected Enable */
--
2.34.1
WARNING: multiple messages have this Message-ID (diff)
From: "Marek Behún" <kabel@kernel.org>
To: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
Bjorn Helgaas <helgaas@kernel.org>
Cc: "Krzysztof Wilczyński" <kw@linux.com>,
"Marc Zyngier" <maz@kernel.org>,
pali@kernel.org, linux-pci@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
"Gregory CLEMENT" <gregory.clement@bootlin.com>,
"Marek Behún" <kabel@kernel.org>
Subject: [PATCH 04/18] PCI: Add PCI_EXP_SLTCAP_*_SHIFT macros
Date: Sun, 20 Feb 2022 20:33:32 +0100 [thread overview]
Message-ID: <20220220193346.23789-5-kabel@kernel.org> (raw)
In-Reply-To: <20220220193346.23789-1-kabel@kernel.org>
From: Pali Rohár <pali@kernel.org>
These macros allows to easily compose and extract Slot Power Limit and
Physical Slot Number values from Slot Capability Register.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
---
include/uapi/linux/pci_regs.h | 3 +++
1 file changed, 3 insertions(+)
diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h
index bee1a9ed6e66..d825e17e448c 100644
--- a/include/uapi/linux/pci_regs.h
+++ b/include/uapi/linux/pci_regs.h
@@ -591,10 +591,13 @@
#define PCI_EXP_SLTCAP_HPS 0x00000020 /* Hot-Plug Surprise */
#define PCI_EXP_SLTCAP_HPC 0x00000040 /* Hot-Plug Capable */
#define PCI_EXP_SLTCAP_SPLV 0x00007f80 /* Slot Power Limit Value */
+#define PCI_EXP_SLTCAP_SPLV_SHIFT 7 /* Slot Power Limit Value shift */
#define PCI_EXP_SLTCAP_SPLS 0x00018000 /* Slot Power Limit Scale */
+#define PCI_EXP_SLTCAP_SPLS_SHIFT 15 /* Slot Power Limit Scale shift */
#define PCI_EXP_SLTCAP_EIP 0x00020000 /* Electromechanical Interlock Present */
#define PCI_EXP_SLTCAP_NCCS 0x00040000 /* No Command Completed Support */
#define PCI_EXP_SLTCAP_PSN 0xfff80000 /* Physical Slot Number */
+#define PCI_EXP_SLTCAP_PSN_SHIFT 19 /* Physical Slot Number shift */
#define PCI_EXP_SLTCTL 0x18 /* Slot Control */
#define PCI_EXP_SLTCTL_ABPE 0x0001 /* Attention Button Pressed Enable */
#define PCI_EXP_SLTCTL_PFDE 0x0002 /* Power Fault Detected Enable */
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-02-20 19:34 UTC|newest]
Thread overview: 85+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-20 19:33 [PATCH 00/18] PCI: aardvark controller changes BATCH 5 Marek Behún
2022-02-20 19:33 ` Marek Behún
2022-02-20 19:33 ` [PATCH 01/18] PCI: pci-bridge-emul: Re-arrange register tests Marek Behún
2022-02-20 19:33 ` Marek Behún
2022-02-20 19:33 ` [PATCH 02/18] PCI: pci-bridge-emul: Add support for PCIe extended capabilities Marek Behún
2022-02-20 19:33 ` Marek Behún
2022-02-20 19:33 ` [PATCH 03/18] PCI: aardvark: Add support for AER registers on emulated bridge Marek Behún
2022-02-20 19:33 ` Marek Behún
2022-02-20 19:33 ` Marek Behún [this message]
2022-02-20 19:33 ` [PATCH 04/18] PCI: Add PCI_EXP_SLTCAP_*_SHIFT macros Marek Behún
2022-04-28 11:09 ` Lorenzo Pieralisi
2022-04-28 11:09 ` Lorenzo Pieralisi
2022-04-28 11:16 ` Pali Rohár
2022-04-28 11:16 ` Pali Rohár
2022-05-18 19:23 ` Bjorn Helgaas
2022-05-18 19:23 ` Bjorn Helgaas
2022-05-18 19:26 ` Pali Rohár
2022-05-18 19:26 ` Pali Rohár
2022-05-18 20:05 ` Marek Behún
2022-05-18 20:05 ` Marek Behún
2022-05-18 20:27 ` Bjorn Helgaas
2022-05-18 20:27 ` Bjorn Helgaas
2022-02-20 19:33 ` [PATCH 05/18] PCI: aardvark: Fix reporting Slot capabilities on emulated bridge Marek Behún
2022-02-20 19:33 ` Marek Behún
2022-02-20 19:33 ` [PATCH 06/18] PCI: pciehp: Enable DLLSC interrupt only if supported Marek Behún
2022-02-20 19:33 ` Marek Behún
2022-05-09 3:42 ` Lukas Wunner
2022-05-13 16:57 ` Pali Rohár
2022-05-13 16:57 ` Pali Rohár
2022-05-14 9:14 ` Lukas Wunner
2022-08-18 12:22 ` Marek Behún
2022-08-18 12:22 ` Marek Behún
2022-02-20 19:33 ` [PATCH 07/18] PCI: pciehp: Enable Command Completed Interrupt " Marek Behún
2022-02-20 19:33 ` Marek Behún
2022-05-09 4:01 ` Lukas Wunner
2022-05-13 16:59 ` Pali Rohár
2022-05-13 16:59 ` Pali Rohár
2022-02-20 19:33 ` [PATCH 08/18] PCI: aardvark: Add support for DLLSC and hotplug interrupt Marek Behún
2022-02-20 19:33 ` Marek Behún
2022-02-20 19:33 ` [PATCH 09/18] PCI: Add PCI_EXP_SLTCTL_ASPL_DISABLE macro Marek Behún
2022-02-20 19:33 ` Marek Behún
2022-02-20 19:33 ` [PATCH 10/18] PCI: Add function for parsing `slot-power-limit-milliwatt` DT property Marek Behún
2022-02-20 19:33 ` Marek Behún
2022-02-20 19:33 ` [PATCH 11/18] dt-bindings: PCI: aardvark: Describe slot-power-limit-milliwatt Marek Behún
2022-02-20 19:33 ` Marek Behún
2022-02-20 19:33 ` [PATCH 12/18] PCI: aardvark: Send Set_Slot_Power_Limit message Marek Behún
2022-02-20 19:33 ` Marek Behún
2022-02-20 19:33 ` [PATCH 13/18] arm64: dts: armada-3720-turris-mox: Define slot-power-limit-milliwatt for PCIe Marek Behún
2022-02-20 19:33 ` Marek Behún
2022-02-20 19:33 ` [PATCH 14/18] PCI: aardvark: Add clock support Marek Behún
2022-02-20 19:33 ` Marek Behún
2022-02-20 19:33 ` [PATCH 15/18] arm64: dts: marvell: armada-37xx: Add clock to PCIe node Marek Behún
2022-02-20 19:33 ` Marek Behún
2022-02-28 15:52 ` Gregory CLEMENT
2022-02-28 15:52 ` Gregory CLEMENT
2022-02-20 19:33 ` [PATCH 16/18] PCI: aardvark: Add suspend to RAM support Marek Behún
2022-02-20 19:33 ` Marek Behún
2022-04-12 11:14 ` Lorenzo Pieralisi
2022-04-12 11:14 ` Lorenzo Pieralisi
2022-02-20 19:33 ` [PATCH 17/18] PCI: aardvark: Run link training in separate worker Marek Behún
2022-02-20 19:33 ` Marek Behún
2022-04-12 15:25 ` Lorenzo Pieralisi
2022-04-12 15:25 ` Lorenzo Pieralisi
2022-04-12 17:55 ` Pali Rohár
2022-04-12 17:55 ` Pali Rohár
2022-04-13 9:16 ` Lorenzo Pieralisi
2022-04-13 9:16 ` Lorenzo Pieralisi
2022-05-04 14:02 ` Marek Behún
2022-05-04 14:02 ` Marek Behún
2022-02-20 19:33 ` [PATCH 18/18] PCI: aardvark: Optimize PCIe card reset via GPIO Marek Behún
2022-02-20 19:33 ` Marek Behún
2022-04-11 15:36 ` [PATCH 00/18] PCI: aardvark controller changes BATCH 5 Lorenzo Pieralisi
2022-04-11 15:36 ` Lorenzo Pieralisi
2022-04-11 16:53 ` Pali Rohár
2022-04-11 16:53 ` Pali Rohár
2022-05-13 10:33 ` Lorenzo Pieralisi
2022-05-13 10:33 ` Lorenzo Pieralisi
2022-05-13 16:48 ` Pali Rohár
2022-05-13 16:48 ` Pali Rohár
2022-05-18 15:54 ` (subset) " Lorenzo Pieralisi
2022-05-18 15:54 ` Lorenzo Pieralisi
2022-08-16 16:25 ` Lorenzo Pieralisi
2022-08-16 16:25 ` Lorenzo Pieralisi
2022-08-18 13:56 ` Marek Behún
2022-08-18 13:56 ` Marek Behún
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220220193346.23789-5-kabel@kernel.org \
--to=kabel@kernel.org \
--cc=gregory.clement@bootlin.com \
--cc=helgaas@kernel.org \
--cc=kw@linux.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=maz@kernel.org \
--cc=pali@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.