From: Tommy Haung <tommy_huang@aspeedtech.com>
To: linux-aspeed@lists.ozlabs.org
Subject: [PATCH v6 4/5] drm/aspeed: Add AST2600 chip support
Date: Wed, 2 Mar 2022 10:49:29 +0800 [thread overview]
Message-ID: <20220302024930.18758-5-tommy_huang@aspeedtech.com> (raw)
In-Reply-To: <20220302024930.18758-1-tommy_huang@aspeedtech.com>
Add AST2600 chip support and setting.
Signed-off-by: Tommy Haung <tommy_huang@aspeedtech.com>
---
drivers/gpu/drm/aspeed/aspeed_gfx_drv.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
index d4b56b3c7597..d10246b1d1c2 100644
--- a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
+++ b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
@@ -82,9 +82,18 @@ static const struct aspeed_gfx_config ast2500_config = {
.scan_line_max = 128,
};
+static const struct aspeed_gfx_config ast2600_config = {
+ .dac_reg = 0xc0,
+ .int_clear_reg = 0x68,
+ .vga_scratch_reg = 0x50,
+ .throd_val = CRT_THROD_LOW(0x50) | CRT_THROD_HIGH(0x70),
+ .scan_line_max = 128,
+};
+
static const struct of_device_id aspeed_gfx_match[] = {
{ .compatible = "aspeed,ast2400-gfx", .data = &ast2400_config },
{ .compatible = "aspeed,ast2500-gfx", .data = &ast2500_config },
+ { .compatible = "aspeed,ast2600-gfx", .data = &ast2600_config },
{ },
};
MODULE_DEVICE_TABLE(of, aspeed_gfx_match);
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Tommy Haung <tommy_huang@aspeedtech.com>
To: <joel@jms.id.au>, <airlied@linux.ie>, <daniel@ffwll.ch>,
<robh+dt@kernel.org>, <andrew@aj.id.au>,
<linux-aspeed@lists.ozlabs.org>,
<dri-devel@lists.freedesktop.org>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>
Cc: <BMC-SW@aspeedtech.com>
Subject: [PATCH v6 4/5] drm/aspeed: Add AST2600 chip support
Date: Wed, 2 Mar 2022 10:49:29 +0800 [thread overview]
Message-ID: <20220302024930.18758-5-tommy_huang@aspeedtech.com> (raw)
In-Reply-To: <20220302024930.18758-1-tommy_huang@aspeedtech.com>
Add AST2600 chip support and setting.
Signed-off-by: Tommy Haung <tommy_huang@aspeedtech.com>
---
drivers/gpu/drm/aspeed/aspeed_gfx_drv.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
index d4b56b3c7597..d10246b1d1c2 100644
--- a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
+++ b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
@@ -82,9 +82,18 @@ static const struct aspeed_gfx_config ast2500_config = {
.scan_line_max = 128,
};
+static const struct aspeed_gfx_config ast2600_config = {
+ .dac_reg = 0xc0,
+ .int_clear_reg = 0x68,
+ .vga_scratch_reg = 0x50,
+ .throd_val = CRT_THROD_LOW(0x50) | CRT_THROD_HIGH(0x70),
+ .scan_line_max = 128,
+};
+
static const struct of_device_id aspeed_gfx_match[] = {
{ .compatible = "aspeed,ast2400-gfx", .data = &ast2400_config },
{ .compatible = "aspeed,ast2500-gfx", .data = &ast2500_config },
+ { .compatible = "aspeed,ast2600-gfx", .data = &ast2600_config },
{ },
};
MODULE_DEVICE_TABLE(of, aspeed_gfx_match);
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Tommy Haung <tommy_huang@aspeedtech.com>
To: <joel@jms.id.au>, <airlied@linux.ie>, <daniel@ffwll.ch>,
<robh+dt@kernel.org>, <andrew@aj.id.au>,
<linux-aspeed@lists.ozlabs.org>,
<dri-devel@lists.freedesktop.org>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>
Cc: <BMC-SW@aspeedtech.com>
Subject: [PATCH v6 4/5] drm/aspeed: Add AST2600 chip support
Date: Wed, 2 Mar 2022 10:49:29 +0800 [thread overview]
Message-ID: <20220302024930.18758-5-tommy_huang@aspeedtech.com> (raw)
In-Reply-To: <20220302024930.18758-1-tommy_huang@aspeedtech.com>
Add AST2600 chip support and setting.
Signed-off-by: Tommy Haung <tommy_huang@aspeedtech.com>
---
drivers/gpu/drm/aspeed/aspeed_gfx_drv.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
index d4b56b3c7597..d10246b1d1c2 100644
--- a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
+++ b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
@@ -82,9 +82,18 @@ static const struct aspeed_gfx_config ast2500_config = {
.scan_line_max = 128,
};
+static const struct aspeed_gfx_config ast2600_config = {
+ .dac_reg = 0xc0,
+ .int_clear_reg = 0x68,
+ .vga_scratch_reg = 0x50,
+ .throd_val = CRT_THROD_LOW(0x50) | CRT_THROD_HIGH(0x70),
+ .scan_line_max = 128,
+};
+
static const struct of_device_id aspeed_gfx_match[] = {
{ .compatible = "aspeed,ast2400-gfx", .data = &ast2400_config },
{ .compatible = "aspeed,ast2500-gfx", .data = &ast2500_config },
+ { .compatible = "aspeed,ast2600-gfx", .data = &ast2600_config },
{ },
};
MODULE_DEVICE_TABLE(of, aspeed_gfx_match);
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Tommy Haung <tommy_huang@aspeedtech.com>
To: <joel@jms.id.au>, <airlied@linux.ie>, <daniel@ffwll.ch>,
<robh+dt@kernel.org>, <andrew@aj.id.au>,
<linux-aspeed@lists.ozlabs.org>,
<dri-devel@lists.freedesktop.org>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>
Cc: BMC-SW@aspeedtech.com
Subject: [PATCH v6 4/5] drm/aspeed: Add AST2600 chip support
Date: Wed, 2 Mar 2022 10:49:29 +0800 [thread overview]
Message-ID: <20220302024930.18758-5-tommy_huang@aspeedtech.com> (raw)
In-Reply-To: <20220302024930.18758-1-tommy_huang@aspeedtech.com>
Add AST2600 chip support and setting.
Signed-off-by: Tommy Haung <tommy_huang@aspeedtech.com>
---
drivers/gpu/drm/aspeed/aspeed_gfx_drv.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
index d4b56b3c7597..d10246b1d1c2 100644
--- a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
+++ b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
@@ -82,9 +82,18 @@ static const struct aspeed_gfx_config ast2500_config = {
.scan_line_max = 128,
};
+static const struct aspeed_gfx_config ast2600_config = {
+ .dac_reg = 0xc0,
+ .int_clear_reg = 0x68,
+ .vga_scratch_reg = 0x50,
+ .throd_val = CRT_THROD_LOW(0x50) | CRT_THROD_HIGH(0x70),
+ .scan_line_max = 128,
+};
+
static const struct of_device_id aspeed_gfx_match[] = {
{ .compatible = "aspeed,ast2400-gfx", .data = &ast2400_config },
{ .compatible = "aspeed,ast2500-gfx", .data = &ast2500_config },
+ { .compatible = "aspeed,ast2600-gfx", .data = &ast2600_config },
{ },
};
MODULE_DEVICE_TABLE(of, aspeed_gfx_match);
--
2.17.1
next prev parent reply other threads:[~2022-03-02 2:49 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-02 2:49 [PATCH v6 0/5] Add Aspeed AST2600 soc display support Tommy Haung
2022-03-02 2:49 ` Tommy Haung
2022-03-02 2:49 ` Tommy Haung
2022-03-02 2:49 ` Tommy Haung
2022-03-02 2:49 ` [PATCH v6 1/5] ARM: dts: aspeed: Add GFX node to AST2600 Tommy Haung
2022-03-02 2:49 ` Tommy Haung
2022-03-02 2:49 ` Tommy Haung
2022-03-02 2:49 ` Tommy Haung
2022-03-02 2:49 ` [PATCH v6 2/5] ARM: dts: aspeed: ast2600-evb: Enable GFX device Tommy Haung
2022-03-02 2:49 ` Tommy Haung
2022-03-02 2:49 ` Tommy Haung
2022-03-02 2:49 ` Tommy Haung
2022-03-02 2:49 ` [PATCH v6 3/5] drm/aspeed: Update INTR_STS handling Tommy Haung
2022-03-02 2:49 ` Tommy Haung
2022-03-02 2:49 ` Tommy Haung
2022-03-02 2:49 ` Tommy Haung
2022-03-02 2:49 ` Tommy Haung [this message]
2022-03-02 2:49 ` [PATCH v6 4/5] drm/aspeed: Add AST2600 chip support Tommy Haung
2022-03-02 2:49 ` Tommy Haung
2022-03-02 2:49 ` Tommy Haung
2022-03-02 2:49 ` [PATCH v6 5/5] ARM: dtsi: aspeed: Modified gfx reset control Tommy Haung
2022-03-02 2:49 ` Tommy Haung
2022-03-02 2:49 ` Tommy Haung
2022-03-02 2:49 ` Tommy Haung
2022-03-02 3:08 ` Joel Stanley
2022-03-02 3:08 ` Joel Stanley
2022-03-02 3:08 ` Joel Stanley
2022-03-02 3:08 ` Joel Stanley
2022-03-02 3:09 ` [PATCH v6 0/5] Add Aspeed AST2600 soc display support Joel Stanley
2022-03-02 3:09 ` Joel Stanley
2022-03-02 3:09 ` Joel Stanley
2022-03-02 3:09 ` Joel Stanley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220302024930.18758-5-tommy_huang@aspeedtech.com \
--to=tommy_huang@aspeedtech.com \
--cc=linux-aspeed@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.