[PATCH v2] mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064N

[Tokunori Ikegami <ikegami.t@gmail.com>]

The regression issue has been caused on S29GL064N and reported it.
Also the change mentioned is to use chip_good() for buffered write.
So disable the change on S29GL064N and use chip_ready() as before.

Fixes: dfeae1073583("mtd: cfi_cmdset_0002: Change write buffer to check correct value")
Signed-off-by: Tokunori Ikegami <ikegami.t@gmail.com>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Cc: linux-mtd@lists.infradead.org
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/b687c259-6413-26c9-d4c9-b3afa69ea124@pengutronix.de/
---
 drivers/mtd/chips/cfi_cmdset_0002.c | 89 +++++++++++++++--------------
 1 file changed, 47 insertions(+), 42 deletions(-)

diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
index a761134fd3be..5e14b60e8638 100644
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -48,6 +48,7 @@
 #define SST49LF040B		0x0050
 #define SST49LF008A		0x005a
 #define AT49BV6416		0x00d6
+#define S29GL064N_MN12		0x0c01
 
 /*
  * Status Register bit description. Used by flash devices that don't
@@ -462,7 +463,7 @@ static struct cfi_fixup cfi_fixup_table[] = {
 	{ CFI_MFR_AMD, 0x0056, fixup_use_secsi },
 	{ CFI_MFR_AMD, 0x005C, fixup_use_secsi },
 	{ CFI_MFR_AMD, 0x005F, fixup_use_secsi },
-	{ CFI_MFR_AMD, 0x0c01, fixup_s29gl064n_sectors },
+	{ CFI_MFR_AMD, S29GL064N_MN12, fixup_s29gl064n_sectors },
 	{ CFI_MFR_AMD, 0x1301, fixup_s29gl064n_sectors },
 	{ CFI_MFR_AMD, 0x1a00, fixup_s29gl032n_sectors },
 	{ CFI_MFR_AMD, 0x1a01, fixup_s29gl032n_sectors },
@@ -801,22 +802,12 @@ static struct mtd_info *cfi_amdstd_setup(struct mtd_info *mtd)
 	return NULL;
 }
 
-/*
- * Return true if the chip is ready.
- *
- * Ready is one of: read mode, query mode, erase-suspend-read mode (in any
- * non-suspended sector) and is indicated by no toggle bits toggling.
- *
- * Note that anything more complicated than checking if no bits are toggling
- * (including checking DQ5 for an error status) is tricky to get working
- * correctly and is therefore not done	(particularly with interleaved chips
- * as each chip must be checked independently of the others).
- */
-static int __xipram chip_ready(struct map_info *map, struct flchip *chip,
-			       unsigned long addr)
+static int __xipram chip_check(struct map_info *map, struct flchip *chip,
+			       unsigned long addr, map_word *expected)
 {
 	struct cfi_private *cfi = map->fldrv_priv;
-	map_word d, t;
+	map_word oldd, curd;
+	int ret;
 
 	if (cfi_use_status_reg(cfi)) {
 		map_word ready = CMD(CFI_SR_DRB);
@@ -826,17 +817,35 @@ static int __xipram chip_ready(struct map_info *map, struct flchip *chip,
 		 */
 		cfi_send_gen_cmd(0x70, cfi->addr_unlock1, chip->start, map, cfi,
 				 cfi->device_type, NULL);
-		d = map_read(map, addr);
+		curd = map_read(map, addr);
 
-		return map_word_andequal(map, d, ready, ready);
+		return map_word_andequal(map, curd, ready, ready);
 	}
 
-	d = map_read(map, addr);
-	t = map_read(map, addr);
+	oldd = map_read(map, addr);
+	curd = map_read(map, addr);
+
+	ret = map_word_equal(map, oldd, curd);
 
-	return map_word_equal(map, d, t);
+	if (!ret || !expected)
+		return ret;
+
+	return map_word_equal(map, curd, *expected);
 }
 
+/*
+ * Return true if the chip is ready.
+ *
+ * Ready is one of: read mode, query mode, erase-suspend-read mode (in any
+ * non-suspended sector) and is indicated by no toggle bits toggling.
+ *
+ * Note that anything more complicated than checking if no bits are toggling
+ * (including checking DQ5 for an error status) is tricky to get working
+ * correctly and is therefore not done	(particularly with interleaved chips
+ * as each chip must be checked independently of the others).
+ */
+#define chip_ready(map, chip, addr) chip_check(map, chip, addr, NULL)
+
 /*
  * Return true if the chip is ready and has the correct value.
  *
@@ -855,28 +864,24 @@ static int __xipram chip_ready(struct map_info *map, struct flchip *chip,
 static int __xipram chip_good(struct map_info *map, struct flchip *chip,
 			      unsigned long addr, map_word expected)
 {
-	struct cfi_private *cfi = map->fldrv_priv;
-	map_word oldd, curd;
-
-	if (cfi_use_status_reg(cfi)) {
-		map_word ready = CMD(CFI_SR_DRB);
+	return chip_check(map, chip, addr, &expected);
+}
 
-		/*
-		 * For chips that support status register, check device
-		 * ready bit
-		 */
-		cfi_send_gen_cmd(0x70, cfi->addr_unlock1, chip->start, map, cfi,
-				 cfi->device_type, NULL);
-		curd = map_read(map, addr);
+static bool cfi_use_chip_ready_for_write(struct map_info *map)
+{
+	struct cfi_private *cfi = map->fldrv_priv;
 
-		return map_word_andequal(map, curd, ready, ready);
-	}
+	return cfi->mfr == CFI_MFR_AMD && cfi->id == S29GL064N_MN12;
+}
 
-	oldd = map_read(map, addr);
-	curd = map_read(map, addr);
+static int __xipram chip_good_for_write(struct map_info *map,
+					struct flchip *chip, unsigned long addr,
+					map_word expected)
+{
+	if (cfi_use_chip_ready_for_write(map))
+		return chip_ready(map, chip, addr);
 
-	return	map_word_equal(map, oldd, curd) &&
-		map_word_equal(map, curd, expected);
+	return chip_good(map, chip, addr, expected);
 }
 
 static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr, int mode)
@@ -1699,7 +1704,7 @@ static int __xipram do_write_oneword_once(struct map_info *map,
 		 * "chip_good" to avoid the failure due to scheduling.
 		 */
 		if (time_after(jiffies, timeo) &&
-		    !chip_good(map, chip, adr, datum)) {
+		    !chip_good_for_write(map, chip, adr, datum)) {
 			xip_enable(map, chip, adr);
 			printk(KERN_WARNING "MTD %s(): software timeout\n", __func__);
 			xip_disable(map, chip, adr);
@@ -1707,7 +1712,7 @@ static int __xipram do_write_oneword_once(struct map_info *map,
 			break;
 		}
 
-		if (chip_good(map, chip, adr, datum)) {
+		if (chip_good_for_write(map, chip, adr, datum)) {
 			if (cfi_check_err_status(map, chip, adr))
 				ret = -EIO;
 			break;
@@ -1979,14 +1984,14 @@ static int __xipram do_write_buffer_wait(struct map_info *map,
 		 * "chip_good" to avoid the failure due to scheduling.
 		 */
 		if (time_after(jiffies, timeo) &&
-		    !chip_good(map, chip, adr, datum)) {
+		    !chip_good_for_write(map, chip, adr, datum)) {
 			pr_err("MTD %s(): software timeout, address:0x%.8lx.\n",
 			       __func__, adr);
 			ret = -EIO;
 			break;
 		}
 
-		if (chip_good(map, chip, adr, datum)) {
+		if (chip_good_for_write(map, chip, adr, datum)) {
 			if (cfi_check_err_status(map, chip, adr))
 				ret = -EIO;
 			break;
-- 
2.32.0


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/