Re: [PATCH RFC v2 01/11] iommu: Add pasid_bits field in struct dev_iommu

[Jacob Pan <jacob.jun.pan@intel.com>]

Hi BaoLu,

On Tue, 29 Mar 2022 13:37:50 +0800, Lu Baolu <baolu.lu@linux.intel.com>
wrote:

> Use this field to save the pasid/ssid bits that a device is able to
> support with its IOMMU hardware. It is a generic attribute of a device
> and lifting it into the per-device dev_iommu struct makes it possible
> to allocate a PASID for device without calls into the IOMMU drivers.
> Any iommu driver which suports PASID related features should set this
> field before features are enabled on the devices.
> 
> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
> ---
>  include/linux/iommu.h                       | 1 +
>  drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 2 ++
>  drivers/iommu/intel/iommu.c                 | 5 ++++-
>  3 files changed, 7 insertions(+), 1 deletion(-)
> 
> diff --git a/include/linux/iommu.h b/include/linux/iommu.h
> index 6ef2df258673..36f43af0af53 100644
> --- a/include/linux/iommu.h
> +++ b/include/linux/iommu.h
> @@ -368,6 +368,7 @@ struct dev_iommu {
>  	struct iommu_fwspec		*fwspec;
>  	struct iommu_device		*iommu_dev;
>  	void				*priv;
> +	unsigned int			pasid_bits;
pasid_width?
PCI spec uses "Max PASID Width"

>  };
>  
>  int iommu_device_register(struct iommu_device *iommu,
> diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
> b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c index
> 627a3ed5ee8f..afc63fce6107 100644 ---
> a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c +++
> b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c @@ -2681,6 +2681,8 @@
> static struct iommu_device *arm_smmu_probe_device(struct device *dev)
> smmu->features & ARM_SMMU_FEAT_STALL_FORCE) master->stall_enabled = true;
>  
> +	dev->iommu->pasid_bits = master->ssid_bits;
> +
>  	return &smmu->iommu;
>  
>  err_free_master:
> diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
> index 6f7485c44a4b..c1b91bce1530 100644
> --- a/drivers/iommu/intel/iommu.c
> +++ b/drivers/iommu/intel/iommu.c
> @@ -4587,8 +4587,11 @@ static struct iommu_device
> *intel_iommu_probe_device(struct device *dev) if (pasid_supported(iommu))
> { int features = pci_pasid_features(pdev);
>  
> -				if (features >= 0)
> +				if (features >= 0) {
>  					info->pasid_supported = features
> | 1;
> +					dev->iommu->pasid_bits =
> +
> fls(pci_max_pasids(pdev)) - 1;
> +				}
>  			}
>  
>  			if (info->ats_supported && ecap_prs(iommu->ecap)
> &&


Thanks,

Jacob
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu