From: Maxime Ripard <maxime@cerno.tech>
To: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: linux-clk <linux-clk@vger.kernel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@vger.kernel.org>,
linux-stm32@st-md-mailman.stormreply.com,
Linux ARM <linux-arm-kernel@lists.infradead.org>,
open list <linux-kernel@vger.kernel.org>,
lkft-triage@lists.linaro.org, regressions@lists.linux.dev,
gabriel.fernandez@foss.st.com,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
Philipp Zabel <p.zabel@pengutronix.de>,
Nicolas Dechesne <nicolas.dechesne@linaro.org>
Subject: Re: [next] db845c: WARNING: CPU: 5 PID: 8 at drivers/clk/clk-divider.c:139 divider_recalc_rate
Date: Fri, 1 Apr 2022 17:10:58 +0200 [thread overview]
Message-ID: <20220401151058.fipdax3kvmxknctv@houat> (raw)
In-Reply-To: <CA+G9fYuqU45hHmK4WMUNEXQbmBucE+9fB=S9wcHEfEHaZ2jgcQ@mail.gmail.com>
[-- Attachment #1: Type: text/plain, Size: 4893 bytes --]
Hi,
On Thu, Mar 31, 2022 at 05:33:57PM +0530, Naresh Kamboju wrote:
> Following kernel warning noticed on db845c while booting linux next-20220331.
>
> metadata:
> git_ref: master
> git_repo: https://gitlab.com/Linaro/lkft/mirrors/next/linux-next
> git_sha: fdcbcd1348f4ef713668bae1b0fa9774e1811205
> git_describe: next-20220331
> kernel_version: 5.17.0
> kernel-config: https://builds.tuxbuild.com/278RLnhgJL7XdlJbcbv07jiwbYB/config
>
> Boot log:
> [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x517f803c]
> [ 0.000000] Linux version 5.17.0-next-20220331 (tuxmake@tuxmake)
> (aarch64-linux-gnu-gcc (Debian 11.2.0-18) 11.2.0, GNU ld (GNU Binutils
> for Debian) 2.38) #1 SMP PREEMPT @1648699852
> [ 0.000000] Machine model: Thundercomm Dragonboard 845c
> <trim>
> [ 8.131366] ------------[ cut here ]------------
> [ 8.131374] dsi0_pll_bit_clk: Zero divisor and CLK_DIVIDER_ALLOW_ZERO not set
> [ 8.131387] WARNING: CPU: 5 PID: 8 at drivers/clk/clk-divider.c:139
> divider_recalc_rate+0x8c/0xc0
> [ 8.131398] Modules linked in: qcom_spmi_adc5 snd_soc_sdm845
> qcom_vadc_common qcom_spmi_temp_alarm qcom_pon crct10dif_ce rtc_pm8xxx
> snd_soc_rt5663 msm snd_soc_qcom_common gpu_sched snd_soc_rl6231
> soundwire_bus reset_qcom_pdc drm_dp_helper qcom_camss hci_uart
> videobuf2_dma_sg btqca v4l2_fwnode venus_core ath10k_snoc v4l2_async
> btbcm ath10k_core i2c_qcom_geni v4l2_mem2mem videobuf2_memops
> videobuf2_v4l2 ath bluetooth camcc_sdm845 videobuf2_common
> spi_geni_qcom i2c_qcom_cci qcom_rng mac80211 xhci_pci qcom_q6v5_mss
> xhci_pci_renesas cfg80211 icc_osm_l3 slim_qcom_ngd_ctrl qcom_wdt
> rfkill qrtr lmh pdr_interface display_connector slimbus qcom_q6v5_pas
> drm_kms_helper qcom_pil_info qcom_q6v5 qcom_sysmon qcom_common
> qcom_glink_smem qmi_helpers drm mdt_loader socinfo rmtfs_mem fuse
> [ 8.131462] CPU: 5 PID: 8 Comm: kworker/u16:0 Not tainted
> 5.17.0-next-20220331 #1
> [ 8.131465] Hardware name: Thundercomm Dragonboard 845c (DT)
> [ 8.131467] Workqueue: events_unbound deferred_probe_work_func
> [ 8.131475] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
> [ 8.131477] pc : divider_recalc_rate+0x8c/0xc0
> [ 8.131479] lr : divider_recalc_rate+0x8c/0xc0
> [ 8.131481] sp : ffff8000080936c0
> [ 8.131482] x29: ffff8000080936c0 x28: ffff781940e58d00 x27: ffffa7f3f1bc6d38
> [ 8.131485] x26: ffffa7f3f1bc6cf8 x25: 0000000000000000 x24: ffffffffffffffff
> [ 8.131488] x23: ffff781947e8a400 x22: 000000003b9aca50 x21: ffff781940be0800
> [ 8.131491] x20: ffff781947e8a800 x19: 000000003b9aca50 x18: 0000000000000000
> [ 8.131494] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
> [ 8.131497] x14: ffff7819bd718000 x13: 0a74657320746f6e x12: 204f52455a5f574f
> [ 8.131500] x11: 4c4c415f52454449 x10: 5649445f4b4c4320 x9 : ffffa7f3f011de84
> [ 8.131502] x8 : 445f4b4c4320646e x7 : 6120726f73697669 x6 : 0000000000000001
> [ 8.131505] x5 : ffffa7f3f288f000 x4 : ffffa7f3f288f2d0 x3 : 0000000000000000
> [ 8.131508] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff7819402c7000
> [ 8.131511] Call trace:
> [ 8.131512] divider_recalc_rate+0x8c/0xc0
> [ 8.131513] clk_divider_recalc_rate+0x64/0x90
> [ 8.131515] clk_recalc+0x40/0xb0
> [ 8.131519] clk_calc_subtree+0x58/0x90
> [ 8.131521] clk_calc_subtree+0x70/0x90
> [ 8.131523] clk_calc_new_rates+0x150/0x290
> [ 8.131526] clk_calc_new_rates+0x100/0x290
> [ 8.131528] clk_calc_new_rates+0x100/0x290
> [ 8.131530] clk_calc_new_rates+0x100/0x290
> [ 8.131533] clk_core_set_rate_nolock+0xa0/0x2a4
> [ 8.131535] clk_set_rate_range_nolock.part.0+0xbc/0x2a0
> [ 8.131538] __clk_put+0x70/0x140
> [ 8.131540] clk_put+0x1c/0x30
> [ 8.131543] of_clk_set_defaults+0x140/0x3c0
> [ 8.131546] platform_probe+0x48/0xf0
> [ 8.131548] really_probe+0x184/0x3d0
> [ 8.131550] __driver_probe_device+0x11c/0x190
> [ 8.131553] driver_probe_device+0x44/0xf4
> [ 8.131556] __device_attach_driver+0xa4/0x140
> [ 8.131558] bus_for_each_drv+0x84/0xe0
> [ 8.131561] __device_attach+0xe4/0x1c0
> [ 8.131563] device_initial_probe+0x20/0x30
> [ 8.131565] bus_probe_device+0xa4/0xb0
> [ 8.131567] deferred_probe_work_func+0xa8/0xfc
> [ 8.131570] process_one_work+0x1dc/0x450
> [ 8.131575] worker_thread+0x154/0x450
> [ 8.131577] kthread+0x100/0x110
> [ 8.131579] ret_from_fork+0x10/0x20
> [ 8.131584] ---[ end trace 0000000000000000 ]---
> [ 8.131588] ------------[ cut here ]------------
I'm not sure if it's feasible, but if it is, it looks like something
that could be fixed by the patch pasted here:
https://lore.kernel.org/linux-clk/20220401122736.5yvanksa4pla7uql@houat/
Could you test it?
Thanks!
Maxime
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
WARNING: multiple messages have this Message-ID (diff)
From: Maxime Ripard <maxime@cerno.tech>
To: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: linux-clk <linux-clk@vger.kernel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@vger.kernel.org>,
linux-stm32@st-md-mailman.stormreply.com,
Linux ARM <linux-arm-kernel@lists.infradead.org>,
open list <linux-kernel@vger.kernel.org>,
lkft-triage@lists.linaro.org, regressions@lists.linux.dev,
gabriel.fernandez@foss.st.com,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
Philipp Zabel <p.zabel@pengutronix.de>,
Nicolas Dechesne <nicolas.dechesne@linaro.org>
Subject: Re: [next] db845c: WARNING: CPU: 5 PID: 8 at drivers/clk/clk-divider.c:139 divider_recalc_rate
Date: Fri, 1 Apr 2022 17:10:58 +0200 [thread overview]
Message-ID: <20220401151058.fipdax3kvmxknctv@houat> (raw)
In-Reply-To: <CA+G9fYuqU45hHmK4WMUNEXQbmBucE+9fB=S9wcHEfEHaZ2jgcQ@mail.gmail.com>
[-- Attachment #1.1: Type: text/plain, Size: 4893 bytes --]
Hi,
On Thu, Mar 31, 2022 at 05:33:57PM +0530, Naresh Kamboju wrote:
> Following kernel warning noticed on db845c while booting linux next-20220331.
>
> metadata:
> git_ref: master
> git_repo: https://gitlab.com/Linaro/lkft/mirrors/next/linux-next
> git_sha: fdcbcd1348f4ef713668bae1b0fa9774e1811205
> git_describe: next-20220331
> kernel_version: 5.17.0
> kernel-config: https://builds.tuxbuild.com/278RLnhgJL7XdlJbcbv07jiwbYB/config
>
> Boot log:
> [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x517f803c]
> [ 0.000000] Linux version 5.17.0-next-20220331 (tuxmake@tuxmake)
> (aarch64-linux-gnu-gcc (Debian 11.2.0-18) 11.2.0, GNU ld (GNU Binutils
> for Debian) 2.38) #1 SMP PREEMPT @1648699852
> [ 0.000000] Machine model: Thundercomm Dragonboard 845c
> <trim>
> [ 8.131366] ------------[ cut here ]------------
> [ 8.131374] dsi0_pll_bit_clk: Zero divisor and CLK_DIVIDER_ALLOW_ZERO not set
> [ 8.131387] WARNING: CPU: 5 PID: 8 at drivers/clk/clk-divider.c:139
> divider_recalc_rate+0x8c/0xc0
> [ 8.131398] Modules linked in: qcom_spmi_adc5 snd_soc_sdm845
> qcom_vadc_common qcom_spmi_temp_alarm qcom_pon crct10dif_ce rtc_pm8xxx
> snd_soc_rt5663 msm snd_soc_qcom_common gpu_sched snd_soc_rl6231
> soundwire_bus reset_qcom_pdc drm_dp_helper qcom_camss hci_uart
> videobuf2_dma_sg btqca v4l2_fwnode venus_core ath10k_snoc v4l2_async
> btbcm ath10k_core i2c_qcom_geni v4l2_mem2mem videobuf2_memops
> videobuf2_v4l2 ath bluetooth camcc_sdm845 videobuf2_common
> spi_geni_qcom i2c_qcom_cci qcom_rng mac80211 xhci_pci qcom_q6v5_mss
> xhci_pci_renesas cfg80211 icc_osm_l3 slim_qcom_ngd_ctrl qcom_wdt
> rfkill qrtr lmh pdr_interface display_connector slimbus qcom_q6v5_pas
> drm_kms_helper qcom_pil_info qcom_q6v5 qcom_sysmon qcom_common
> qcom_glink_smem qmi_helpers drm mdt_loader socinfo rmtfs_mem fuse
> [ 8.131462] CPU: 5 PID: 8 Comm: kworker/u16:0 Not tainted
> 5.17.0-next-20220331 #1
> [ 8.131465] Hardware name: Thundercomm Dragonboard 845c (DT)
> [ 8.131467] Workqueue: events_unbound deferred_probe_work_func
> [ 8.131475] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
> [ 8.131477] pc : divider_recalc_rate+0x8c/0xc0
> [ 8.131479] lr : divider_recalc_rate+0x8c/0xc0
> [ 8.131481] sp : ffff8000080936c0
> [ 8.131482] x29: ffff8000080936c0 x28: ffff781940e58d00 x27: ffffa7f3f1bc6d38
> [ 8.131485] x26: ffffa7f3f1bc6cf8 x25: 0000000000000000 x24: ffffffffffffffff
> [ 8.131488] x23: ffff781947e8a400 x22: 000000003b9aca50 x21: ffff781940be0800
> [ 8.131491] x20: ffff781947e8a800 x19: 000000003b9aca50 x18: 0000000000000000
> [ 8.131494] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
> [ 8.131497] x14: ffff7819bd718000 x13: 0a74657320746f6e x12: 204f52455a5f574f
> [ 8.131500] x11: 4c4c415f52454449 x10: 5649445f4b4c4320 x9 : ffffa7f3f011de84
> [ 8.131502] x8 : 445f4b4c4320646e x7 : 6120726f73697669 x6 : 0000000000000001
> [ 8.131505] x5 : ffffa7f3f288f000 x4 : ffffa7f3f288f2d0 x3 : 0000000000000000
> [ 8.131508] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff7819402c7000
> [ 8.131511] Call trace:
> [ 8.131512] divider_recalc_rate+0x8c/0xc0
> [ 8.131513] clk_divider_recalc_rate+0x64/0x90
> [ 8.131515] clk_recalc+0x40/0xb0
> [ 8.131519] clk_calc_subtree+0x58/0x90
> [ 8.131521] clk_calc_subtree+0x70/0x90
> [ 8.131523] clk_calc_new_rates+0x150/0x290
> [ 8.131526] clk_calc_new_rates+0x100/0x290
> [ 8.131528] clk_calc_new_rates+0x100/0x290
> [ 8.131530] clk_calc_new_rates+0x100/0x290
> [ 8.131533] clk_core_set_rate_nolock+0xa0/0x2a4
> [ 8.131535] clk_set_rate_range_nolock.part.0+0xbc/0x2a0
> [ 8.131538] __clk_put+0x70/0x140
> [ 8.131540] clk_put+0x1c/0x30
> [ 8.131543] of_clk_set_defaults+0x140/0x3c0
> [ 8.131546] platform_probe+0x48/0xf0
> [ 8.131548] really_probe+0x184/0x3d0
> [ 8.131550] __driver_probe_device+0x11c/0x190
> [ 8.131553] driver_probe_device+0x44/0xf4
> [ 8.131556] __device_attach_driver+0xa4/0x140
> [ 8.131558] bus_for_each_drv+0x84/0xe0
> [ 8.131561] __device_attach+0xe4/0x1c0
> [ 8.131563] device_initial_probe+0x20/0x30
> [ 8.131565] bus_probe_device+0xa4/0xb0
> [ 8.131567] deferred_probe_work_func+0xa8/0xfc
> [ 8.131570] process_one_work+0x1dc/0x450
> [ 8.131575] worker_thread+0x154/0x450
> [ 8.131577] kthread+0x100/0x110
> [ 8.131579] ret_from_fork+0x10/0x20
> [ 8.131584] ---[ end trace 0000000000000000 ]---
> [ 8.131588] ------------[ cut here ]------------
I'm not sure if it's feasible, but if it is, it looks like something
that could be fixed by the patch pasted here:
https://lore.kernel.org/linux-clk/20220401122736.5yvanksa4pla7uql@houat/
Could you test it?
Thanks!
Maxime
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
[-- Attachment #2: Type: text/plain, Size: 176 bytes --]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-04-01 15:54 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-31 12:03 [next] db845c: WARNING: CPU: 5 PID: 8 at drivers/clk/clk-divider.c:139 divider_recalc_rate Naresh Kamboju
2022-03-31 12:03 ` Naresh Kamboju
2022-03-31 22:04 ` Stephen Boyd
2022-03-31 22:04 ` Stephen Boyd
2022-04-01 15:10 ` Maxime Ripard [this message]
2022-04-01 15:10 ` Maxime Ripard
2022-04-01 18:46 ` Naresh Kamboju
2022-04-01 18:46 ` Naresh Kamboju
2022-04-07 7:54 ` Maxime Ripard
2022-04-07 7:54 ` Maxime Ripard
2022-04-07 11:42 ` Naresh Kamboju
2022-04-07 11:42 ` Naresh Kamboju
2022-04-07 13:46 ` Maxime Ripard
2022-04-07 13:46 ` Maxime Ripard
2022-04-07 17:56 ` Naresh Kamboju
2022-04-07 17:56 ` Naresh Kamboju
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220401151058.fipdax3kvmxknctv@houat \
--to=maxime@cerno.tech \
--cc=alexandre.torgue@foss.st.com \
--cc=devicetree@vger.kernel.org \
--cc=gabriel.fernandez@foss.st.com \
--cc=krzysztof.kozlowski@canonical.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=lkft-triage@lists.linaro.org \
--cc=mcoquelin.stm32@gmail.com \
--cc=mturquette@baylibre.com \
--cc=naresh.kamboju@linaro.org \
--cc=nicolas.dechesne@linaro.org \
--cc=p.zabel@pengutronix.de \
--cc=regressions@lists.linux.dev \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.