From: Tony Lindgren <tony@atomide.com>
To: Daniel Lezcano <daniel.lezcano@linaro.org>,
Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, Keerthy <j-keerthy@ti.com>,
Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>
Subject: [PATCH 1/3] clocksource/drivers/timer-ti-dm: Move inline functions to driver for am6
Date: Fri, 8 Apr 2022 13:17:13 +0300 [thread overview]
Message-ID: <20220408101715.43697-2-tony@atomide.com> (raw)
In-Reply-To: <20220408101715.43697-1-tony@atomide.com>
The __omap_dm_timer_* inline functions in the header are no longer needed
outside the driver, and the header ifdefs prevent the driver working for
ARCH_K3.
Let's move the inline functions to the driver and drop the ifdefs and
drop the unused functions __omap_dm_timer_override_errata() and
__omap_dm_timer_load_start().
Cc: Keerthy <j-keerthy@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
drivers/clocksource/timer-ti-dm.c | 115 ++++++++++++++++++++++++
include/clocksource/timer-ti-dm.h | 144 ------------------------------
2 files changed, 115 insertions(+), 144 deletions(-)
diff --git a/drivers/clocksource/timer-ti-dm.c b/drivers/clocksource/timer-ti-dm.c
--- a/drivers/clocksource/timer-ti-dm.c
+++ b/drivers/clocksource/timer-ti-dm.c
@@ -44,6 +44,121 @@ enum {
REQUEST_BY_NODE,
};
+static inline u32 __omap_dm_timer_read(struct omap_dm_timer *timer, u32 reg,
+ int posted)
+{
+ if (posted)
+ while (readl_relaxed(timer->pend) & (reg >> WPSHIFT))
+ cpu_relax();
+
+ return readl_relaxed(timer->func_base + (reg & 0xff));
+}
+
+static inline void __omap_dm_timer_write(struct omap_dm_timer *timer,
+ u32 reg, u32 val, int posted)
+{
+ if (posted)
+ while (readl_relaxed(timer->pend) & (reg >> WPSHIFT))
+ cpu_relax();
+
+ writel_relaxed(val, timer->func_base + (reg & 0xff));
+}
+
+static inline void __omap_dm_timer_init_regs(struct omap_dm_timer *timer)
+{
+ u32 tidr;
+
+ /* Assume v1 ip if bits [31:16] are zero */
+ tidr = readl_relaxed(timer->io_base);
+ if (!(tidr >> 16)) {
+ timer->revision = 1;
+ timer->irq_stat = timer->io_base + OMAP_TIMER_V1_STAT_OFFSET;
+ timer->irq_ena = timer->io_base + OMAP_TIMER_V1_INT_EN_OFFSET;
+ timer->irq_dis = timer->io_base + OMAP_TIMER_V1_INT_EN_OFFSET;
+ timer->pend = timer->io_base + _OMAP_TIMER_WRITE_PEND_OFFSET;
+ timer->func_base = timer->io_base;
+ } else {
+ timer->revision = 2;
+ timer->irq_stat = timer->io_base + OMAP_TIMER_V2_IRQSTATUS;
+ timer->irq_ena = timer->io_base + OMAP_TIMER_V2_IRQENABLE_SET;
+ timer->irq_dis = timer->io_base + OMAP_TIMER_V2_IRQENABLE_CLR;
+ timer->pend = timer->io_base +
+ _OMAP_TIMER_WRITE_PEND_OFFSET +
+ OMAP_TIMER_V2_FUNC_OFFSET;
+ timer->func_base = timer->io_base + OMAP_TIMER_V2_FUNC_OFFSET;
+ }
+}
+
+/*
+ * __omap_dm_timer_enable_posted - enables write posted mode
+ * @timer: pointer to timer instance handle
+ *
+ * Enables the write posted mode for the timer. When posted mode is enabled
+ * writes to certain timer registers are immediately acknowledged by the
+ * internal bus and hence prevents stalling the CPU waiting for the write to
+ * complete. Enabling this feature can improve performance for writing to the
+ * timer registers.
+ */
+static inline void __omap_dm_timer_enable_posted(struct omap_dm_timer *timer)
+{
+ if (timer->posted)
+ return;
+
+ if (timer->errata & OMAP_TIMER_ERRATA_I103_I767) {
+ timer->posted = OMAP_TIMER_NONPOSTED;
+ __omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG, 0, 0);
+ return;
+ }
+
+ __omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG,
+ OMAP_TIMER_CTRL_POSTED, 0);
+ timer->context.tsicr = OMAP_TIMER_CTRL_POSTED;
+ timer->posted = OMAP_TIMER_POSTED;
+}
+
+static inline void __omap_dm_timer_stop(struct omap_dm_timer *timer,
+ int posted, unsigned long rate)
+{
+ u32 l;
+
+ l = __omap_dm_timer_read(timer, OMAP_TIMER_CTRL_REG, posted);
+ if (l & OMAP_TIMER_CTRL_ST) {
+ l &= ~0x1;
+ __omap_dm_timer_write(timer, OMAP_TIMER_CTRL_REG, l, posted);
+#ifdef CONFIG_ARCH_OMAP2PLUS
+ /* Readback to make sure write has completed */
+ __omap_dm_timer_read(timer, OMAP_TIMER_CTRL_REG, posted);
+ /*
+ * Wait for functional clock period x 3.5 to make sure that
+ * timer is stopped
+ */
+ udelay(3500000 / rate + 1);
+#endif
+ }
+
+ /* Ack possibly pending interrupt */
+ writel_relaxed(OMAP_TIMER_INT_OVERFLOW, timer->irq_stat);
+}
+
+static inline void __omap_dm_timer_int_enable(struct omap_dm_timer *timer,
+ unsigned int value)
+{
+ writel_relaxed(value, timer->irq_ena);
+ __omap_dm_timer_write(timer, OMAP_TIMER_WAKEUP_EN_REG, value, 0);
+}
+
+static inline unsigned int
+__omap_dm_timer_read_counter(struct omap_dm_timer *timer, int posted)
+{
+ return __omap_dm_timer_read(timer, OMAP_TIMER_COUNTER_REG, posted);
+}
+
+static inline void __omap_dm_timer_write_status(struct omap_dm_timer *timer,
+ unsigned int value)
+{
+ writel_relaxed(value, timer->irq_stat);
+}
+
/**
* omap_dm_timer_read_reg - read timer registers in posted and non-posted mode
* @timer: timer pointer over which read operation to perform
diff --git a/include/clocksource/timer-ti-dm.h b/include/clocksource/timer-ti-dm.h
--- a/include/clocksource/timer-ti-dm.h
+++ b/include/clocksource/timer-ti-dm.h
@@ -247,148 +247,4 @@ int omap_dm_timers_active(void);
#define OMAP_TIMER_TICK_INT_MASK_COUNT_REG \
(_OMAP_TIMER_TICK_INT_MASK_COUNT_OFFSET | (WP_TOWR << WPSHIFT))
-/*
- * The below are inlined to optimize code size for system timers. Other code
- * should not need these at all.
- */
-#if defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP2PLUS)
-static inline u32 __omap_dm_timer_read(struct omap_dm_timer *timer, u32 reg,
- int posted)
-{
- if (posted)
- while (readl_relaxed(timer->pend) & (reg >> WPSHIFT))
- cpu_relax();
-
- return readl_relaxed(timer->func_base + (reg & 0xff));
-}
-
-static inline void __omap_dm_timer_write(struct omap_dm_timer *timer,
- u32 reg, u32 val, int posted)
-{
- if (posted)
- while (readl_relaxed(timer->pend) & (reg >> WPSHIFT))
- cpu_relax();
-
- writel_relaxed(val, timer->func_base + (reg & 0xff));
-}
-
-static inline void __omap_dm_timer_init_regs(struct omap_dm_timer *timer)
-{
- u32 tidr;
-
- /* Assume v1 ip if bits [31:16] are zero */
- tidr = readl_relaxed(timer->io_base);
- if (!(tidr >> 16)) {
- timer->revision = 1;
- timer->irq_stat = timer->io_base + OMAP_TIMER_V1_STAT_OFFSET;
- timer->irq_ena = timer->io_base + OMAP_TIMER_V1_INT_EN_OFFSET;
- timer->irq_dis = timer->io_base + OMAP_TIMER_V1_INT_EN_OFFSET;
- timer->pend = timer->io_base + _OMAP_TIMER_WRITE_PEND_OFFSET;
- timer->func_base = timer->io_base;
- } else {
- timer->revision = 2;
- timer->irq_stat = timer->io_base + OMAP_TIMER_V2_IRQSTATUS;
- timer->irq_ena = timer->io_base + OMAP_TIMER_V2_IRQENABLE_SET;
- timer->irq_dis = timer->io_base + OMAP_TIMER_V2_IRQENABLE_CLR;
- timer->pend = timer->io_base +
- _OMAP_TIMER_WRITE_PEND_OFFSET +
- OMAP_TIMER_V2_FUNC_OFFSET;
- timer->func_base = timer->io_base + OMAP_TIMER_V2_FUNC_OFFSET;
- }
-}
-
-/*
- * __omap_dm_timer_enable_posted - enables write posted mode
- * @timer: pointer to timer instance handle
- *
- * Enables the write posted mode for the timer. When posted mode is enabled
- * writes to certain timer registers are immediately acknowledged by the
- * internal bus and hence prevents stalling the CPU waiting for the write to
- * complete. Enabling this feature can improve performance for writing to the
- * timer registers.
- */
-static inline void __omap_dm_timer_enable_posted(struct omap_dm_timer *timer)
-{
- if (timer->posted)
- return;
-
- if (timer->errata & OMAP_TIMER_ERRATA_I103_I767) {
- timer->posted = OMAP_TIMER_NONPOSTED;
- __omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG, 0, 0);
- return;
- }
-
- __omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG,
- OMAP_TIMER_CTRL_POSTED, 0);
- timer->context.tsicr = OMAP_TIMER_CTRL_POSTED;
- timer->posted = OMAP_TIMER_POSTED;
-}
-
-/**
- * __omap_dm_timer_override_errata - override errata flags for a timer
- * @timer: pointer to timer handle
- * @errata: errata flags to be ignored
- *
- * For a given timer, override a timer errata by clearing the flags
- * specified by the errata argument. A specific erratum should only be
- * overridden for a timer if the timer is used in such a way the erratum
- * has no impact.
- */
-static inline void __omap_dm_timer_override_errata(struct omap_dm_timer *timer,
- u32 errata)
-{
- timer->errata &= ~errata;
-}
-
-static inline void __omap_dm_timer_stop(struct omap_dm_timer *timer,
- int posted, unsigned long rate)
-{
- u32 l;
-
- l = __omap_dm_timer_read(timer, OMAP_TIMER_CTRL_REG, posted);
- if (l & OMAP_TIMER_CTRL_ST) {
- l &= ~0x1;
- __omap_dm_timer_write(timer, OMAP_TIMER_CTRL_REG, l, posted);
-#ifdef CONFIG_ARCH_OMAP2PLUS
- /* Readback to make sure write has completed */
- __omap_dm_timer_read(timer, OMAP_TIMER_CTRL_REG, posted);
- /*
- * Wait for functional clock period x 3.5 to make sure that
- * timer is stopped
- */
- udelay(3500000 / rate + 1);
-#endif
- }
-
- /* Ack possibly pending interrupt */
- writel_relaxed(OMAP_TIMER_INT_OVERFLOW, timer->irq_stat);
-}
-
-static inline void __omap_dm_timer_load_start(struct omap_dm_timer *timer,
- u32 ctrl, unsigned int load,
- int posted)
-{
- __omap_dm_timer_write(timer, OMAP_TIMER_COUNTER_REG, load, posted);
- __omap_dm_timer_write(timer, OMAP_TIMER_CTRL_REG, ctrl, posted);
-}
-
-static inline void __omap_dm_timer_int_enable(struct omap_dm_timer *timer,
- unsigned int value)
-{
- writel_relaxed(value, timer->irq_ena);
- __omap_dm_timer_write(timer, OMAP_TIMER_WAKEUP_EN_REG, value, 0);
-}
-
-static inline unsigned int
-__omap_dm_timer_read_counter(struct omap_dm_timer *timer, int posted)
-{
- return __omap_dm_timer_read(timer, OMAP_TIMER_COUNTER_REG, posted);
-}
-
-static inline void __omap_dm_timer_write_status(struct omap_dm_timer *timer,
- unsigned int value)
-{
- writel_relaxed(value, timer->irq_stat);
-}
-#endif /* CONFIG_ARCH_OMAP1 || CONFIG_ARCH_OMAP2PLUS */
#endif /* __CLOCKSOURCE_DMTIMER_H */
--
2.35.1
WARNING: multiple messages have this Message-ID (diff)
From: Tony Lindgren <tony@atomide.com>
To: Daniel Lezcano <daniel.lezcano@linaro.org>,
Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, Keerthy <j-keerthy@ti.com>,
Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>
Subject: [PATCH 1/3] clocksource/drivers/timer-ti-dm: Move inline functions to driver for am6
Date: Fri, 8 Apr 2022 13:17:13 +0300 [thread overview]
Message-ID: <20220408101715.43697-2-tony@atomide.com> (raw)
In-Reply-To: <20220408101715.43697-1-tony@atomide.com>
The __omap_dm_timer_* inline functions in the header are no longer needed
outside the driver, and the header ifdefs prevent the driver working for
ARCH_K3.
Let's move the inline functions to the driver and drop the ifdefs and
drop the unused functions __omap_dm_timer_override_errata() and
__omap_dm_timer_load_start().
Cc: Keerthy <j-keerthy@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
drivers/clocksource/timer-ti-dm.c | 115 ++++++++++++++++++++++++
include/clocksource/timer-ti-dm.h | 144 ------------------------------
2 files changed, 115 insertions(+), 144 deletions(-)
diff --git a/drivers/clocksource/timer-ti-dm.c b/drivers/clocksource/timer-ti-dm.c
--- a/drivers/clocksource/timer-ti-dm.c
+++ b/drivers/clocksource/timer-ti-dm.c
@@ -44,6 +44,121 @@ enum {
REQUEST_BY_NODE,
};
+static inline u32 __omap_dm_timer_read(struct omap_dm_timer *timer, u32 reg,
+ int posted)
+{
+ if (posted)
+ while (readl_relaxed(timer->pend) & (reg >> WPSHIFT))
+ cpu_relax();
+
+ return readl_relaxed(timer->func_base + (reg & 0xff));
+}
+
+static inline void __omap_dm_timer_write(struct omap_dm_timer *timer,
+ u32 reg, u32 val, int posted)
+{
+ if (posted)
+ while (readl_relaxed(timer->pend) & (reg >> WPSHIFT))
+ cpu_relax();
+
+ writel_relaxed(val, timer->func_base + (reg & 0xff));
+}
+
+static inline void __omap_dm_timer_init_regs(struct omap_dm_timer *timer)
+{
+ u32 tidr;
+
+ /* Assume v1 ip if bits [31:16] are zero */
+ tidr = readl_relaxed(timer->io_base);
+ if (!(tidr >> 16)) {
+ timer->revision = 1;
+ timer->irq_stat = timer->io_base + OMAP_TIMER_V1_STAT_OFFSET;
+ timer->irq_ena = timer->io_base + OMAP_TIMER_V1_INT_EN_OFFSET;
+ timer->irq_dis = timer->io_base + OMAP_TIMER_V1_INT_EN_OFFSET;
+ timer->pend = timer->io_base + _OMAP_TIMER_WRITE_PEND_OFFSET;
+ timer->func_base = timer->io_base;
+ } else {
+ timer->revision = 2;
+ timer->irq_stat = timer->io_base + OMAP_TIMER_V2_IRQSTATUS;
+ timer->irq_ena = timer->io_base + OMAP_TIMER_V2_IRQENABLE_SET;
+ timer->irq_dis = timer->io_base + OMAP_TIMER_V2_IRQENABLE_CLR;
+ timer->pend = timer->io_base +
+ _OMAP_TIMER_WRITE_PEND_OFFSET +
+ OMAP_TIMER_V2_FUNC_OFFSET;
+ timer->func_base = timer->io_base + OMAP_TIMER_V2_FUNC_OFFSET;
+ }
+}
+
+/*
+ * __omap_dm_timer_enable_posted - enables write posted mode
+ * @timer: pointer to timer instance handle
+ *
+ * Enables the write posted mode for the timer. When posted mode is enabled
+ * writes to certain timer registers are immediately acknowledged by the
+ * internal bus and hence prevents stalling the CPU waiting for the write to
+ * complete. Enabling this feature can improve performance for writing to the
+ * timer registers.
+ */
+static inline void __omap_dm_timer_enable_posted(struct omap_dm_timer *timer)
+{
+ if (timer->posted)
+ return;
+
+ if (timer->errata & OMAP_TIMER_ERRATA_I103_I767) {
+ timer->posted = OMAP_TIMER_NONPOSTED;
+ __omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG, 0, 0);
+ return;
+ }
+
+ __omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG,
+ OMAP_TIMER_CTRL_POSTED, 0);
+ timer->context.tsicr = OMAP_TIMER_CTRL_POSTED;
+ timer->posted = OMAP_TIMER_POSTED;
+}
+
+static inline void __omap_dm_timer_stop(struct omap_dm_timer *timer,
+ int posted, unsigned long rate)
+{
+ u32 l;
+
+ l = __omap_dm_timer_read(timer, OMAP_TIMER_CTRL_REG, posted);
+ if (l & OMAP_TIMER_CTRL_ST) {
+ l &= ~0x1;
+ __omap_dm_timer_write(timer, OMAP_TIMER_CTRL_REG, l, posted);
+#ifdef CONFIG_ARCH_OMAP2PLUS
+ /* Readback to make sure write has completed */
+ __omap_dm_timer_read(timer, OMAP_TIMER_CTRL_REG, posted);
+ /*
+ * Wait for functional clock period x 3.5 to make sure that
+ * timer is stopped
+ */
+ udelay(3500000 / rate + 1);
+#endif
+ }
+
+ /* Ack possibly pending interrupt */
+ writel_relaxed(OMAP_TIMER_INT_OVERFLOW, timer->irq_stat);
+}
+
+static inline void __omap_dm_timer_int_enable(struct omap_dm_timer *timer,
+ unsigned int value)
+{
+ writel_relaxed(value, timer->irq_ena);
+ __omap_dm_timer_write(timer, OMAP_TIMER_WAKEUP_EN_REG, value, 0);
+}
+
+static inline unsigned int
+__omap_dm_timer_read_counter(struct omap_dm_timer *timer, int posted)
+{
+ return __omap_dm_timer_read(timer, OMAP_TIMER_COUNTER_REG, posted);
+}
+
+static inline void __omap_dm_timer_write_status(struct omap_dm_timer *timer,
+ unsigned int value)
+{
+ writel_relaxed(value, timer->irq_stat);
+}
+
/**
* omap_dm_timer_read_reg - read timer registers in posted and non-posted mode
* @timer: timer pointer over which read operation to perform
diff --git a/include/clocksource/timer-ti-dm.h b/include/clocksource/timer-ti-dm.h
--- a/include/clocksource/timer-ti-dm.h
+++ b/include/clocksource/timer-ti-dm.h
@@ -247,148 +247,4 @@ int omap_dm_timers_active(void);
#define OMAP_TIMER_TICK_INT_MASK_COUNT_REG \
(_OMAP_TIMER_TICK_INT_MASK_COUNT_OFFSET | (WP_TOWR << WPSHIFT))
-/*
- * The below are inlined to optimize code size for system timers. Other code
- * should not need these at all.
- */
-#if defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP2PLUS)
-static inline u32 __omap_dm_timer_read(struct omap_dm_timer *timer, u32 reg,
- int posted)
-{
- if (posted)
- while (readl_relaxed(timer->pend) & (reg >> WPSHIFT))
- cpu_relax();
-
- return readl_relaxed(timer->func_base + (reg & 0xff));
-}
-
-static inline void __omap_dm_timer_write(struct omap_dm_timer *timer,
- u32 reg, u32 val, int posted)
-{
- if (posted)
- while (readl_relaxed(timer->pend) & (reg >> WPSHIFT))
- cpu_relax();
-
- writel_relaxed(val, timer->func_base + (reg & 0xff));
-}
-
-static inline void __omap_dm_timer_init_regs(struct omap_dm_timer *timer)
-{
- u32 tidr;
-
- /* Assume v1 ip if bits [31:16] are zero */
- tidr = readl_relaxed(timer->io_base);
- if (!(tidr >> 16)) {
- timer->revision = 1;
- timer->irq_stat = timer->io_base + OMAP_TIMER_V1_STAT_OFFSET;
- timer->irq_ena = timer->io_base + OMAP_TIMER_V1_INT_EN_OFFSET;
- timer->irq_dis = timer->io_base + OMAP_TIMER_V1_INT_EN_OFFSET;
- timer->pend = timer->io_base + _OMAP_TIMER_WRITE_PEND_OFFSET;
- timer->func_base = timer->io_base;
- } else {
- timer->revision = 2;
- timer->irq_stat = timer->io_base + OMAP_TIMER_V2_IRQSTATUS;
- timer->irq_ena = timer->io_base + OMAP_TIMER_V2_IRQENABLE_SET;
- timer->irq_dis = timer->io_base + OMAP_TIMER_V2_IRQENABLE_CLR;
- timer->pend = timer->io_base +
- _OMAP_TIMER_WRITE_PEND_OFFSET +
- OMAP_TIMER_V2_FUNC_OFFSET;
- timer->func_base = timer->io_base + OMAP_TIMER_V2_FUNC_OFFSET;
- }
-}
-
-/*
- * __omap_dm_timer_enable_posted - enables write posted mode
- * @timer: pointer to timer instance handle
- *
- * Enables the write posted mode for the timer. When posted mode is enabled
- * writes to certain timer registers are immediately acknowledged by the
- * internal bus and hence prevents stalling the CPU waiting for the write to
- * complete. Enabling this feature can improve performance for writing to the
- * timer registers.
- */
-static inline void __omap_dm_timer_enable_posted(struct omap_dm_timer *timer)
-{
- if (timer->posted)
- return;
-
- if (timer->errata & OMAP_TIMER_ERRATA_I103_I767) {
- timer->posted = OMAP_TIMER_NONPOSTED;
- __omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG, 0, 0);
- return;
- }
-
- __omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG,
- OMAP_TIMER_CTRL_POSTED, 0);
- timer->context.tsicr = OMAP_TIMER_CTRL_POSTED;
- timer->posted = OMAP_TIMER_POSTED;
-}
-
-/**
- * __omap_dm_timer_override_errata - override errata flags for a timer
- * @timer: pointer to timer handle
- * @errata: errata flags to be ignored
- *
- * For a given timer, override a timer errata by clearing the flags
- * specified by the errata argument. A specific erratum should only be
- * overridden for a timer if the timer is used in such a way the erratum
- * has no impact.
- */
-static inline void __omap_dm_timer_override_errata(struct omap_dm_timer *timer,
- u32 errata)
-{
- timer->errata &= ~errata;
-}
-
-static inline void __omap_dm_timer_stop(struct omap_dm_timer *timer,
- int posted, unsigned long rate)
-{
- u32 l;
-
- l = __omap_dm_timer_read(timer, OMAP_TIMER_CTRL_REG, posted);
- if (l & OMAP_TIMER_CTRL_ST) {
- l &= ~0x1;
- __omap_dm_timer_write(timer, OMAP_TIMER_CTRL_REG, l, posted);
-#ifdef CONFIG_ARCH_OMAP2PLUS
- /* Readback to make sure write has completed */
- __omap_dm_timer_read(timer, OMAP_TIMER_CTRL_REG, posted);
- /*
- * Wait for functional clock period x 3.5 to make sure that
- * timer is stopped
- */
- udelay(3500000 / rate + 1);
-#endif
- }
-
- /* Ack possibly pending interrupt */
- writel_relaxed(OMAP_TIMER_INT_OVERFLOW, timer->irq_stat);
-}
-
-static inline void __omap_dm_timer_load_start(struct omap_dm_timer *timer,
- u32 ctrl, unsigned int load,
- int posted)
-{
- __omap_dm_timer_write(timer, OMAP_TIMER_COUNTER_REG, load, posted);
- __omap_dm_timer_write(timer, OMAP_TIMER_CTRL_REG, ctrl, posted);
-}
-
-static inline void __omap_dm_timer_int_enable(struct omap_dm_timer *timer,
- unsigned int value)
-{
- writel_relaxed(value, timer->irq_ena);
- __omap_dm_timer_write(timer, OMAP_TIMER_WAKEUP_EN_REG, value, 0);
-}
-
-static inline unsigned int
-__omap_dm_timer_read_counter(struct omap_dm_timer *timer, int posted)
-{
- return __omap_dm_timer_read(timer, OMAP_TIMER_COUNTER_REG, posted);
-}
-
-static inline void __omap_dm_timer_write_status(struct omap_dm_timer *timer,
- unsigned int value)
-{
- writel_relaxed(value, timer->irq_stat);
-}
-#endif /* CONFIG_ARCH_OMAP1 || CONFIG_ARCH_OMAP2PLUS */
#endif /* __CLOCKSOURCE_DMTIMER_H */
--
2.35.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-04-08 10:17 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-08 10:17 [PATCHv2 0/3] TI timer changes for am6 Tony Lindgren
2022-04-08 10:17 ` Tony Lindgren
2022-04-08 10:17 ` Tony Lindgren [this message]
2022-04-08 10:17 ` [PATCH 1/3] clocksource/drivers/timer-ti-dm: Move inline functions to driver " Tony Lindgren
2022-07-28 10:44 ` [tip: timers/core] " tip-bot2 for Tony Lindgren
2022-04-08 10:17 ` [PATCH 2/3] clocksource/drivers/timer-ti-dm: Make timer selectable for ARCH_K3 Tony Lindgren
2022-04-08 10:17 ` Tony Lindgren
2022-05-20 15:28 ` Daniel Lezcano
2022-05-20 15:28 ` Daniel Lezcano
2022-05-23 7:13 ` Tony Lindgren
2022-05-23 7:13 ` Tony Lindgren
2022-05-23 12:41 ` Daniel Lezcano
2022-05-23 12:41 ` Daniel Lezcano
2022-05-23 14:33 ` Tony Lindgren
2022-05-23 14:33 ` Tony Lindgren
2022-07-28 10:44 ` [tip: timers/core] " tip-bot2 for Tony Lindgren
2022-04-08 10:17 ` [PATCH 3/3] clocksource/drivers/timer-ti-dm: Add compatible for am6 SoCs Tony Lindgren
2022-04-08 10:17 ` Tony Lindgren
2022-07-28 10:44 ` [tip: timers/core] " tip-bot2 for Tony Lindgren
-- strict thread matches above, loose matches on Subject: below --
2022-04-21 9:01 [PATCH 1/3] clocksource/drivers/timer-ti-dm: Move inline functions to driver for am6 kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220408101715.43697-2-tony@atomide.com \
--to=tony@atomide.com \
--cc=daniel.lezcano@linaro.org \
--cc=j-keerthy@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=nm@ti.com \
--cc=tglx@linutronix.de \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.