* [PATCH 0/2] Add SATA and USB to BPI-R2-Pro board
@ 2022-04-09 11:21 ` Frank Wunderlich
0 siblings, 0 replies; 12+ messages in thread
From: Frank Wunderlich @ 2022-04-09 11:21 UTC (permalink / raw)
To: linux-rockchip
Cc: Frank Wunderlich, Rob Herring, Krzysztof Kozlowski,
Heiko Stuebner, devicetree, linux-arm-kernel, linux-kernel
From: Frank Wunderlich <frank-w@public-files.de>
Add necessary nodes for SATA and USB-Support on Bananapi-R2-Pro Board.
it depends on "enable usb support on rk356x" series from Peter Geis
https://patchwork.kernel.org/project/linux-rockchip/list/?series=630470
and a fixup-Patch changing clock names which should be squashed into
above series in v6
ref_clk => ref
suspend_clk => suspend
bus_clk => bus_early
Frank Wunderlich (2):
arm64: dts: rockchip: Add USB nodes for BPI-R2-Pro
arm64: dts: rockchip: Add SATA support to BPI-R2-Pro
.../boot/dts/rockchip/rk3568-bpi-r2-pro.dts | 102 ++++++++++++++++++
1 file changed, 102 insertions(+)
--
2.25.1
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 0/2] Add SATA and USB to BPI-R2-Pro board
@ 2022-04-09 11:21 ` Frank Wunderlich
0 siblings, 0 replies; 12+ messages in thread
From: Frank Wunderlich @ 2022-04-09 11:21 UTC (permalink / raw)
To: linux-rockchip
Cc: Frank Wunderlich, Rob Herring, Krzysztof Kozlowski,
Heiko Stuebner, devicetree, linux-arm-kernel, linux-kernel
From: Frank Wunderlich <frank-w@public-files.de>
Add necessary nodes for SATA and USB-Support on Bananapi-R2-Pro Board.
it depends on "enable usb support on rk356x" series from Peter Geis
https://patchwork.kernel.org/project/linux-rockchip/list/?series=630470
and a fixup-Patch changing clock names which should be squashed into
above series in v6
ref_clk => ref
suspend_clk => suspend
bus_clk => bus_early
Frank Wunderlich (2):
arm64: dts: rockchip: Add USB nodes for BPI-R2-Pro
arm64: dts: rockchip: Add SATA support to BPI-R2-Pro
.../boot/dts/rockchip/rk3568-bpi-r2-pro.dts | 102 ++++++++++++++++++
1 file changed, 102 insertions(+)
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 1/2] arm64: dts: rockchip: Add USB nodes for BPI-R2-Pro
2022-04-09 11:21 ` Frank Wunderlich
(?)
@ 2022-04-09 11:21 ` Frank Wunderlich
-1 siblings, 0 replies; 12+ messages in thread
From: Frank Wunderlich @ 2022-04-09 11:21 UTC (permalink / raw)
To: linux-rockchip
Cc: Frank Wunderlich, Rob Herring, Krzysztof Kozlowski,
Heiko Stuebner, devicetree, linux-arm-kernel, linux-kernel
From: Frank Wunderlich <frank-w@public-files.de>
Add usb2 nodes to Bananapi R2 Pro board
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
.../boot/dts/rockchip/rk3568-bpi-r2-pro.dts | 93 +++++++++++++++++++
1 file changed, 93 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
index 067fe4a6b178..879557595a64 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
@@ -73,6 +73,50 @@ vcc5v0_sys: vcc5v0-sys {
regulator-max-microvolt = <5000000>;
vin-supply = <&dc_12v>;
};
+
+ vcc5v0_usb: vcc5v0_usb {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_usb";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&dc_12v>;
+ };
+
+ vcc5v0_usb_host: vcc5v0-usb-host {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_usb_host_en>;
+ regulator-name = "vcc5v0_usb_host";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v0_usb>;
+ };
+
+ vcc5v0_usb_otg: vcc5v0-usb-otg {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_usb_otg_en>;
+ regulator-name = "vcc5v0_usb_otg";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v0_usb>;
+ };
+};
+
+&combphy0 {
+ /* used for USB3 */
+ status = "okay";
+};
+
+&combphy1 {
+ /* used for USB3 */
+ status = "okay";
};
&gmac0 {
@@ -368,6 +412,16 @@ pmic_int: pmic_int {
<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
+
+ usb {
+ vcc5v0_usb_host_en: vcc5v0_usb_host_en {
+ rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ vcc5v0_usb_otg_en: vcc5v0_usb_otg_en {
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
};
&pmu_io_domains {
@@ -485,3 +539,42 @@ &uart9 {
pinctrl-0 = <&uart9m1_xfer>;
status = "disabled";
};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usb_host0_xhci {
+ extcon = <&usb2phy0>;
+ status = "okay";
+};
+
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
+
+&usb_host1_xhci {
+ status = "okay";
+};
+
+&usb2phy0 {
+ status = "okay";
+};
+
+&usb2phy0_host {
+ phy-supply = <&vcc5v0_usb_host>;
+ status = "okay";
+};
+
+&usb2phy0_otg {
+ phy-supply = <&vcc5v0_usb_otg>;
+ status = "okay";
+};
--
2.25.1
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH 1/2] arm64: dts: rockchip: Add USB nodes for BPI-R2-Pro
@ 2022-04-09 11:21 ` Frank Wunderlich
0 siblings, 0 replies; 12+ messages in thread
From: Frank Wunderlich @ 2022-04-09 11:21 UTC (permalink / raw)
To: linux-rockchip
Cc: Frank Wunderlich, Rob Herring, Krzysztof Kozlowski,
Heiko Stuebner, devicetree, linux-arm-kernel, linux-kernel
From: Frank Wunderlich <frank-w@public-files.de>
Add usb2 nodes to Bananapi R2 Pro board
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
.../boot/dts/rockchip/rk3568-bpi-r2-pro.dts | 93 +++++++++++++++++++
1 file changed, 93 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
index 067fe4a6b178..879557595a64 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
@@ -73,6 +73,50 @@ vcc5v0_sys: vcc5v0-sys {
regulator-max-microvolt = <5000000>;
vin-supply = <&dc_12v>;
};
+
+ vcc5v0_usb: vcc5v0_usb {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_usb";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&dc_12v>;
+ };
+
+ vcc5v0_usb_host: vcc5v0-usb-host {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_usb_host_en>;
+ regulator-name = "vcc5v0_usb_host";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v0_usb>;
+ };
+
+ vcc5v0_usb_otg: vcc5v0-usb-otg {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_usb_otg_en>;
+ regulator-name = "vcc5v0_usb_otg";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v0_usb>;
+ };
+};
+
+&combphy0 {
+ /* used for USB3 */
+ status = "okay";
+};
+
+&combphy1 {
+ /* used for USB3 */
+ status = "okay";
};
&gmac0 {
@@ -368,6 +412,16 @@ pmic_int: pmic_int {
<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
+
+ usb {
+ vcc5v0_usb_host_en: vcc5v0_usb_host_en {
+ rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ vcc5v0_usb_otg_en: vcc5v0_usb_otg_en {
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
};
&pmu_io_domains {
@@ -485,3 +539,42 @@ &uart9 {
pinctrl-0 = <&uart9m1_xfer>;
status = "disabled";
};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usb_host0_xhci {
+ extcon = <&usb2phy0>;
+ status = "okay";
+};
+
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
+
+&usb_host1_xhci {
+ status = "okay";
+};
+
+&usb2phy0 {
+ status = "okay";
+};
+
+&usb2phy0_host {
+ phy-supply = <&vcc5v0_usb_host>;
+ status = "okay";
+};
+
+&usb2phy0_otg {
+ phy-supply = <&vcc5v0_usb_otg>;
+ status = "okay";
+};
--
2.25.1
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH 1/2] arm64: dts: rockchip: Add USB nodes for BPI-R2-Pro
@ 2022-04-09 11:21 ` Frank Wunderlich
0 siblings, 0 replies; 12+ messages in thread
From: Frank Wunderlich @ 2022-04-09 11:21 UTC (permalink / raw)
To: linux-rockchip
Cc: Frank Wunderlich, Rob Herring, Krzysztof Kozlowski,
Heiko Stuebner, devicetree, linux-arm-kernel, linux-kernel
From: Frank Wunderlich <frank-w@public-files.de>
Add usb2 nodes to Bananapi R2 Pro board
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
.../boot/dts/rockchip/rk3568-bpi-r2-pro.dts | 93 +++++++++++++++++++
1 file changed, 93 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
index 067fe4a6b178..879557595a64 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
@@ -73,6 +73,50 @@ vcc5v0_sys: vcc5v0-sys {
regulator-max-microvolt = <5000000>;
vin-supply = <&dc_12v>;
};
+
+ vcc5v0_usb: vcc5v0_usb {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_usb";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&dc_12v>;
+ };
+
+ vcc5v0_usb_host: vcc5v0-usb-host {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_usb_host_en>;
+ regulator-name = "vcc5v0_usb_host";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v0_usb>;
+ };
+
+ vcc5v0_usb_otg: vcc5v0-usb-otg {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_usb_otg_en>;
+ regulator-name = "vcc5v0_usb_otg";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v0_usb>;
+ };
+};
+
+&combphy0 {
+ /* used for USB3 */
+ status = "okay";
+};
+
+&combphy1 {
+ /* used for USB3 */
+ status = "okay";
};
&gmac0 {
@@ -368,6 +412,16 @@ pmic_int: pmic_int {
<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
+
+ usb {
+ vcc5v0_usb_host_en: vcc5v0_usb_host_en {
+ rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ vcc5v0_usb_otg_en: vcc5v0_usb_otg_en {
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
};
&pmu_io_domains {
@@ -485,3 +539,42 @@ &uart9 {
pinctrl-0 = <&uart9m1_xfer>;
status = "disabled";
};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usb_host0_xhci {
+ extcon = <&usb2phy0>;
+ status = "okay";
+};
+
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
+
+&usb_host1_xhci {
+ status = "okay";
+};
+
+&usb2phy0 {
+ status = "okay";
+};
+
+&usb2phy0_host {
+ phy-supply = <&vcc5v0_usb_host>;
+ status = "okay";
+};
+
+&usb2phy0_otg {
+ phy-supply = <&vcc5v0_usb_otg>;
+ status = "okay";
+};
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 2/2] arm64: dts: rockchip: Add SATA support to BPI-R2-Pro
2022-04-09 11:21 ` Frank Wunderlich
(?)
@ 2022-04-09 11:21 ` Frank Wunderlich
-1 siblings, 0 replies; 12+ messages in thread
From: Frank Wunderlich @ 2022-04-09 11:21 UTC (permalink / raw)
To: linux-rockchip
Cc: Frank Wunderlich, Rob Herring, Krzysztof Kozlowski,
Heiko Stuebner, devicetree, linux-arm-kernel, linux-kernel
From: Frank Wunderlich <frank-w@public-files.de>
Enable the Combphy and Sata nodes in Bananapi R2 Pro Board.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
index 879557595a64..40cf2236c0b6 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
@@ -119,6 +119,11 @@ &combphy1 {
status = "okay";
};
+&combphy2 {
+ /* used for SATA */
+ status = "okay";
+};
+
&gmac0 {
assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>;
@@ -484,6 +489,10 @@ &saradc {
status = "okay";
};
+&sata2 {
+ status = "okay";
+};
+
&sdhci {
bus-width = <8>;
max-frequency = <200000000>;
--
2.25.1
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH 2/2] arm64: dts: rockchip: Add SATA support to BPI-R2-Pro
@ 2022-04-09 11:21 ` Frank Wunderlich
0 siblings, 0 replies; 12+ messages in thread
From: Frank Wunderlich @ 2022-04-09 11:21 UTC (permalink / raw)
To: linux-rockchip
Cc: Frank Wunderlich, Rob Herring, Krzysztof Kozlowski,
Heiko Stuebner, devicetree, linux-arm-kernel, linux-kernel
From: Frank Wunderlich <frank-w@public-files.de>
Enable the Combphy and Sata nodes in Bananapi R2 Pro Board.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
index 879557595a64..40cf2236c0b6 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
@@ -119,6 +119,11 @@ &combphy1 {
status = "okay";
};
+&combphy2 {
+ /* used for SATA */
+ status = "okay";
+};
+
&gmac0 {
assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>;
@@ -484,6 +489,10 @@ &saradc {
status = "okay";
};
+&sata2 {
+ status = "okay";
+};
+
&sdhci {
bus-width = <8>;
max-frequency = <200000000>;
--
2.25.1
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH 2/2] arm64: dts: rockchip: Add SATA support to BPI-R2-Pro
@ 2022-04-09 11:21 ` Frank Wunderlich
0 siblings, 0 replies; 12+ messages in thread
From: Frank Wunderlich @ 2022-04-09 11:21 UTC (permalink / raw)
To: linux-rockchip
Cc: Frank Wunderlich, Rob Herring, Krzysztof Kozlowski,
Heiko Stuebner, devicetree, linux-arm-kernel, linux-kernel
From: Frank Wunderlich <frank-w@public-files.de>
Enable the Combphy and Sata nodes in Bananapi R2 Pro Board.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
index 879557595a64..40cf2236c0b6 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
@@ -119,6 +119,11 @@ &combphy1 {
status = "okay";
};
+&combphy2 {
+ /* used for SATA */
+ status = "okay";
+};
+
&gmac0 {
assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>;
@@ -484,6 +489,10 @@ &saradc {
status = "okay";
};
+&sata2 {
+ status = "okay";
+};
+
&sdhci {
bus-width = <8>;
max-frequency = <200000000>;
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [PATCH 0/2] Add SATA and USB to BPI-R2-Pro board
2022-04-09 11:21 ` Frank Wunderlich
(?)
@ 2022-04-10 17:12 ` Heiko Stuebner
-1 siblings, 0 replies; 12+ messages in thread
From: Heiko Stuebner @ 2022-04-10 17:12 UTC (permalink / raw)
To: Frank Wunderlich, linux-rockchip
Cc: Heiko Stuebner, Krzysztof Kozlowski, linux-arm-kernel, devicetree,
Frank Wunderlich, Rob Herring, linux-kernel
On Sat, 9 Apr 2022 13:21:34 +0200, Frank Wunderlich wrote:
> Add necessary nodes for SATA and USB-Support on Bananapi-R2-Pro Board.
>
> it depends on "enable usb support on rk356x" series from Peter Geis
>
> https://patchwork.kernel.org/project/linux-rockchip/list/?series=630470
>
> and a fixup-Patch changing clock names which should be squashed into
> above series in v6
>
> [...]
Applied, thanks!
[1/2] arm64: dts: rockchip: Add USB nodes for BPI-R2-Pro
commit: f29ffce32b4e1204b67f82fd80584ec4173cca54
[2/2] arm64: dts: rockchip: Add SATA support to BPI-R2-Pro
commit: 551e645fed5dd2ed4c81c9e3d3b4827862f51dc6
Best regards,
--
Heiko Stuebner <heiko@sntech.de>
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: [PATCH 0/2] Add SATA and USB to BPI-R2-Pro board
@ 2022-04-10 17:12 ` Heiko Stuebner
0 siblings, 0 replies; 12+ messages in thread
From: Heiko Stuebner @ 2022-04-10 17:12 UTC (permalink / raw)
To: Frank Wunderlich, linux-rockchip
Cc: Heiko Stuebner, Krzysztof Kozlowski, linux-arm-kernel, devicetree,
Frank Wunderlich, Rob Herring, linux-kernel
On Sat, 9 Apr 2022 13:21:34 +0200, Frank Wunderlich wrote:
> Add necessary nodes for SATA and USB-Support on Bananapi-R2-Pro Board.
>
> it depends on "enable usb support on rk356x" series from Peter Geis
>
> https://patchwork.kernel.org/project/linux-rockchip/list/?series=630470
>
> and a fixup-Patch changing clock names which should be squashed into
> above series in v6
>
> [...]
Applied, thanks!
[1/2] arm64: dts: rockchip: Add USB nodes for BPI-R2-Pro
commit: f29ffce32b4e1204b67f82fd80584ec4173cca54
[2/2] arm64: dts: rockchip: Add SATA support to BPI-R2-Pro
commit: 551e645fed5dd2ed4c81c9e3d3b4827862f51dc6
Best regards,
--
Heiko Stuebner <heiko@sntech.de>
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: [PATCH 0/2] Add SATA and USB to BPI-R2-Pro board
@ 2022-04-10 17:12 ` Heiko Stuebner
0 siblings, 0 replies; 12+ messages in thread
From: Heiko Stuebner @ 2022-04-10 17:12 UTC (permalink / raw)
To: Frank Wunderlich, linux-rockchip
Cc: Heiko Stuebner, Krzysztof Kozlowski, linux-arm-kernel, devicetree,
Frank Wunderlich, Rob Herring, linux-kernel
On Sat, 9 Apr 2022 13:21:34 +0200, Frank Wunderlich wrote:
> Add necessary nodes for SATA and USB-Support on Bananapi-R2-Pro Board.
>
> it depends on "enable usb support on rk356x" series from Peter Geis
>
> https://patchwork.kernel.org/project/linux-rockchip/list/?series=630470
>
> and a fixup-Patch changing clock names which should be squashed into
> above series in v6
>
> [...]
Applied, thanks!
[1/2] arm64: dts: rockchip: Add USB nodes for BPI-R2-Pro
commit: f29ffce32b4e1204b67f82fd80584ec4173cca54
[2/2] arm64: dts: rockchip: Add SATA support to BPI-R2-Pro
commit: 551e645fed5dd2ed4c81c9e3d3b4827862f51dc6
Best regards,
--
Heiko Stuebner <heiko@sntech.de>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 12+ messages in thread