All of lore.kernel.org
 help / color / mirror / Atom feed
From: Dylan Hung <dylan_hung@aspeedtech.com>
To: linux-aspeed@lists.ozlabs.org
Subject: [PATCH net-next RESEND v5 3/3] ARM: dts: aspeed: add reset properties into MDIO nodes
Date: Mon, 18 Apr 2022 09:40:59 +0800	[thread overview]
Message-ID: <20220418014059.3054-4-dylan_hung@aspeedtech.com> (raw)
In-Reply-To: <20220418014059.3054-1-dylan_hung@aspeedtech.com>

Add reset control properties into MDIO nodes.  The 4 MDIO controllers in
AST2600 SOC share one reset control bit SCU50[3].

Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
---
 arch/arm/boot/dts/aspeed-g6.dtsi | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index c32e87fad4dc..ab20ea8d829d 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -181,6 +181,7 @@ mdio0: mdio at 1e650000 {
 			status = "disabled";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_mdio1_default>;
+			resets = <&syscon ASPEED_RESET_MII>;
 		};
 
 		mdio1: mdio at 1e650008 {
@@ -191,6 +192,7 @@ mdio1: mdio at 1e650008 {
 			status = "disabled";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_mdio2_default>;
+			resets = <&syscon ASPEED_RESET_MII>;
 		};
 
 		mdio2: mdio at 1e650010 {
@@ -201,6 +203,7 @@ mdio2: mdio at 1e650010 {
 			status = "disabled";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_mdio3_default>;
+			resets = <&syscon ASPEED_RESET_MII>;
 		};
 
 		mdio3: mdio at 1e650018 {
@@ -211,6 +214,7 @@ mdio3: mdio at 1e650018 {
 			status = "disabled";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_mdio4_default>;
+			resets = <&syscon ASPEED_RESET_MII>;
 		};
 
 		mac0: ftgmac at 1e660000 {
-- 
2.25.1


WARNING: multiple messages have this Message-ID (diff)
From: Dylan Hung <dylan_hung@aspeedtech.com>
To: <robh+dt@kernel.org>, <joel@jms.id.au>, <andrew@aj.id.au>,
	<andrew@lunn.ch>, <hkallweit1@gmail.com>, <linux@armlinux.org.uk>,
	<davem@davemloft.net>, <kuba@kernel.org>, <pabeni@redhat.com>,
	<p.zabel@pengutronix.de>, <devicetree@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-aspeed@lists.ozlabs.org>, <linux-kernel@vger.kernel.org>,
	<netdev@vger.kernel.org>, <krzk+dt@kernel.org>
Cc: <BMC-SW@aspeedtech.com>
Subject: [PATCH net-next RESEND v5 3/3] ARM: dts: aspeed: add reset properties into MDIO nodes
Date: Mon, 18 Apr 2022 09:40:59 +0800	[thread overview]
Message-ID: <20220418014059.3054-4-dylan_hung@aspeedtech.com> (raw)
In-Reply-To: <20220418014059.3054-1-dylan_hung@aspeedtech.com>

Add reset control properties into MDIO nodes.  The 4 MDIO controllers in
AST2600 SOC share one reset control bit SCU50[3].

Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
---
 arch/arm/boot/dts/aspeed-g6.dtsi | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index c32e87fad4dc..ab20ea8d829d 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -181,6 +181,7 @@ mdio0: mdio@1e650000 {
 			status = "disabled";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_mdio1_default>;
+			resets = <&syscon ASPEED_RESET_MII>;
 		};
 
 		mdio1: mdio@1e650008 {
@@ -191,6 +192,7 @@ mdio1: mdio@1e650008 {
 			status = "disabled";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_mdio2_default>;
+			resets = <&syscon ASPEED_RESET_MII>;
 		};
 
 		mdio2: mdio@1e650010 {
@@ -201,6 +203,7 @@ mdio2: mdio@1e650010 {
 			status = "disabled";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_mdio3_default>;
+			resets = <&syscon ASPEED_RESET_MII>;
 		};
 
 		mdio3: mdio@1e650018 {
@@ -211,6 +214,7 @@ mdio3: mdio@1e650018 {
 			status = "disabled";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_mdio4_default>;
+			resets = <&syscon ASPEED_RESET_MII>;
 		};
 
 		mac0: ftgmac@1e660000 {
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Dylan Hung <dylan_hung@aspeedtech.com>
To: <robh+dt@kernel.org>, <joel@jms.id.au>, <andrew@aj.id.au>,
	<andrew@lunn.ch>, <hkallweit1@gmail.com>, <linux@armlinux.org.uk>,
	<davem@davemloft.net>, <kuba@kernel.org>, <pabeni@redhat.com>,
	<p.zabel@pengutronix.de>, <devicetree@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-aspeed@lists.ozlabs.org>, <linux-kernel@vger.kernel.org>,
	<netdev@vger.kernel.org>, <krzk+dt@kernel.org>
Cc: <BMC-SW@aspeedtech.com>
Subject: [PATCH net-next RESEND v5 3/3] ARM: dts: aspeed: add reset properties into MDIO nodes
Date: Mon, 18 Apr 2022 09:40:59 +0800	[thread overview]
Message-ID: <20220418014059.3054-4-dylan_hung@aspeedtech.com> (raw)
In-Reply-To: <20220418014059.3054-1-dylan_hung@aspeedtech.com>

Add reset control properties into MDIO nodes.  The 4 MDIO controllers in
AST2600 SOC share one reset control bit SCU50[3].

Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
---
 arch/arm/boot/dts/aspeed-g6.dtsi | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index c32e87fad4dc..ab20ea8d829d 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -181,6 +181,7 @@ mdio0: mdio@1e650000 {
 			status = "disabled";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_mdio1_default>;
+			resets = <&syscon ASPEED_RESET_MII>;
 		};
 
 		mdio1: mdio@1e650008 {
@@ -191,6 +192,7 @@ mdio1: mdio@1e650008 {
 			status = "disabled";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_mdio2_default>;
+			resets = <&syscon ASPEED_RESET_MII>;
 		};
 
 		mdio2: mdio@1e650010 {
@@ -201,6 +203,7 @@ mdio2: mdio@1e650010 {
 			status = "disabled";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_mdio3_default>;
+			resets = <&syscon ASPEED_RESET_MII>;
 		};
 
 		mdio3: mdio@1e650018 {
@@ -211,6 +214,7 @@ mdio3: mdio@1e650018 {
 			status = "disabled";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_mdio4_default>;
+			resets = <&syscon ASPEED_RESET_MII>;
 		};
 
 		mac0: ftgmac@1e660000 {
-- 
2.25.1


  parent reply	other threads:[~2022-04-18  1:40 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-18  1:40 [PATCH net-next RESEND v5 0/3] Add reset deassertion for Aspeed MDIO Dylan Hung
2022-04-18  1:40 ` Dylan Hung
2022-04-18  1:40 ` Dylan Hung
2022-04-18  1:40 ` [PATCH net-next RESEND v5 1/3] dt-bindings: net: add reset property for aspeed, ast2600-mdio binding Dylan Hung
2022-04-18  1:40   ` Dylan Hung
2022-04-18  1:40   ` Dylan Hung
2022-04-19  0:51   ` Andrew Jeffery
2022-04-19  0:51     ` Andrew Jeffery
2022-04-19  0:51     ` Andrew Jeffery
2022-04-18  1:40 ` [PATCH net-next RESEND v5 2/3] net: mdio: add reset control for Aspeed MDIO Dylan Hung
2022-04-18  1:40   ` Dylan Hung
2022-04-18  1:40   ` Dylan Hung
2022-04-19  0:52   ` Andrew Jeffery
2022-04-19  0:52     ` Andrew Jeffery
2022-04-19  0:52     ` Andrew Jeffery
2022-04-18  1:40 ` Dylan Hung [this message]
2022-04-18  1:40   ` [PATCH net-next RESEND v5 3/3] ARM: dts: aspeed: add reset properties into MDIO nodes Dylan Hung
2022-04-18  1:40   ` Dylan Hung
2022-04-22 19:25 ` [PATCH net-next RESEND v5 0/3] Add reset deassertion for Aspeed MDIO Jakub Kicinski
2022-04-22 19:25   ` Jakub Kicinski
2022-04-22 19:25   ` Jakub Kicinski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220418014059.3054-4-dylan_hung@aspeedtech.com \
    --to=dylan_hung@aspeedtech.com \
    --cc=linux-aspeed@lists.ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.