[PATCH] i2c: designware: Sort timing parameter ACPI method calls by the speed

[Jarkko Nikula <jarkko.nikula@linux.intel.com>]

It's more logical to read these get timing parameters ACPI method calls
sorted by speed categories in increasing order: Standard-mode,
Fast-mode, Fast-mode Plus and High-speed mode.

Originally these were in order after commit a92ec1746f10
("i2c: designware: get fast plus and high speed *CNT configuration") but
got mixed up over the years.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
---
 drivers/i2c/busses/i2c-designware-common.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-designware-common.c b/drivers/i2c/busses/i2c-designware-common.c
index 9f8574320eb2..e7d316b1401a 100644
--- a/drivers/i2c/busses/i2c-designware-common.c
+++ b/drivers/i2c/busses/i2c-designware-common.c
@@ -266,9 +266,9 @@ int i2c_dw_acpi_configure(struct device *device)
 	 * selected speed modes.
 	 */
 	i2c_dw_acpi_params(device, "SSCN", &dev->ss_hcnt, &dev->ss_lcnt, &ss_ht);
+	i2c_dw_acpi_params(device, "FMCN", &dev->fs_hcnt, &dev->fs_lcnt, &fs_ht);
 	i2c_dw_acpi_params(device, "FPCN", &dev->fp_hcnt, &dev->fp_lcnt, &fp_ht);
 	i2c_dw_acpi_params(device, "HSCN", &dev->hs_hcnt, &dev->hs_lcnt, &hs_ht);
-	i2c_dw_acpi_params(device, "FMCN", &dev->fs_hcnt, &dev->fs_lcnt, &fs_ht);
 
 	switch (t->bus_freq_hz) {
 	case I2C_MAX_STANDARD_MODE_FREQ:
-- 
2.35.1