Re: [PATCH] i2c: designware: Sort timing parameter ACPI method calls by the speed

[Andy Shevchenko <andriy.shevchenko@linux.intel.com>]

On Wed, Apr 20, 2022 at 03:58:02PM +0300, Jarkko Nikula wrote:
> It's more logical to read these get timing parameters ACPI method calls
> sorted by speed categories in increasing order: Standard-mode,
> Fast-mode, Fast-mode Plus and High-speed mode.
> 
> Originally these were in order after commit a92ec1746f10
> ("i2c: designware: get fast plus and high speed *CNT configuration") but
> got mixed up over the years.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

> Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
> ---
>  drivers/i2c/busses/i2c-designware-common.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/i2c/busses/i2c-designware-common.c b/drivers/i2c/busses/i2c-designware-common.c
> index 9f8574320eb2..e7d316b1401a 100644
> --- a/drivers/i2c/busses/i2c-designware-common.c
> +++ b/drivers/i2c/busses/i2c-designware-common.c
> @@ -266,9 +266,9 @@ int i2c_dw_acpi_configure(struct device *device)
>  	 * selected speed modes.
>  	 */
>  	i2c_dw_acpi_params(device, "SSCN", &dev->ss_hcnt, &dev->ss_lcnt, &ss_ht);
> +	i2c_dw_acpi_params(device, "FMCN", &dev->fs_hcnt, &dev->fs_lcnt, &fs_ht);
>  	i2c_dw_acpi_params(device, "FPCN", &dev->fp_hcnt, &dev->fp_lcnt, &fp_ht);
>  	i2c_dw_acpi_params(device, "HSCN", &dev->hs_hcnt, &dev->hs_lcnt, &hs_ht);
> -	i2c_dw_acpi_params(device, "FMCN", &dev->fs_hcnt, &dev->fs_lcnt, &fs_ht);
>  
>  	switch (t->bus_freq_hz) {
>  	case I2C_MAX_STANDARD_MODE_FREQ:
> -- 
> 2.35.1
> 

-- 
With Best Regards,
Andy Shevchenko