* [PATCH] ARM: imx_v6_v7_defconfig: Enable RDNIS by default
@ 2022-04-20 12:27 ` Alistair Francis
0 siblings, 0 replies; 4+ messages in thread
From: Alistair Francis @ 2022-04-20 12:27 UTC (permalink / raw)
To: linux-kernel, linux, s.hauer, shawnguo, linux-arm-kernel
Cc: alistair23, Alistair Francis
Supporting Ethernet over USB is very useful for debugging. This allows
debugging systems where the other networking (WiFi or Ethernet) doesn't come
up, while still allowing SSH access.
This is extreamly useful on the reMarkable 2 as it doesn't have UART RX
or a physical ethernet port. If WiFi doesn't work this is the next best
method to access the device.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
---
arch/arm/configs/imx_v6_v7_defconfig | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index f7498df08dfe..f9ddaba1aad2 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -349,12 +349,16 @@ CONFIG_USB_CONFIGFS_F_UVC=y
CONFIG_USB_CONFIGFS_F_PRINTER=y
CONFIG_USB_ZERO=m
CONFIG_USB_AUDIO=m
-CONFIG_USB_ETH=m
+CONFIG_USB_ETH=y
CONFIG_USB_G_NCM=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FUNCTIONFS=m
+CONFIG_USB_GADGETFS=y
+CONFIG_USB_FUNCTIONFS=y
+CONFIG_USB_FUNCTIONFS_ETH=y
+CONFIG_USB_FUNCTIONFS_RNDIS=y
+CONFIG_USB_FUNCTIONFS_GENERIC=y
CONFIG_USB_MASS_STORAGE=m
CONFIG_USB_G_SERIAL=m
+CONFIG_USB_CDC_COMPOSITE=y
CONFIG_MMC=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
--
2.35.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH] ARM: imx_v6_v7_defconfig: Enable RDNIS by default
@ 2022-04-20 12:27 ` Alistair Francis
0 siblings, 0 replies; 4+ messages in thread
From: Alistair Francis @ 2022-04-20 12:27 UTC (permalink / raw)
To: linux-kernel, linux, s.hauer, shawnguo, linux-arm-kernel
Cc: alistair23, Alistair Francis
Supporting Ethernet over USB is very useful for debugging. This allows
debugging systems where the other networking (WiFi or Ethernet) doesn't come
up, while still allowing SSH access.
This is extreamly useful on the reMarkable 2 as it doesn't have UART RX
or a physical ethernet port. If WiFi doesn't work this is the next best
method to access the device.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
---
arch/arm/configs/imx_v6_v7_defconfig | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index f7498df08dfe..f9ddaba1aad2 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -349,12 +349,16 @@ CONFIG_USB_CONFIGFS_F_UVC=y
CONFIG_USB_CONFIGFS_F_PRINTER=y
CONFIG_USB_ZERO=m
CONFIG_USB_AUDIO=m
-CONFIG_USB_ETH=m
+CONFIG_USB_ETH=y
CONFIG_USB_G_NCM=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FUNCTIONFS=m
+CONFIG_USB_GADGETFS=y
+CONFIG_USB_FUNCTIONFS=y
+CONFIG_USB_FUNCTIONFS_ETH=y
+CONFIG_USB_FUNCTIONFS_RNDIS=y
+CONFIG_USB_FUNCTIONFS_GENERIC=y
CONFIG_USB_MASS_STORAGE=m
CONFIG_USB_G_SERIAL=m
+CONFIG_USB_CDC_COMPOSITE=y
CONFIG_MMC=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
--
2.35.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH] ARM: imx_v6_v7_defconfig: Enable RDNIS by default
2022-04-20 12:27 ` Alistair Francis
@ 2022-05-05 1:52 ` Shawn Guo
-1 siblings, 0 replies; 4+ messages in thread
From: Shawn Guo @ 2022-05-05 1:52 UTC (permalink / raw)
To: Alistair Francis
Cc: linux-kernel, linux, s.hauer, linux-arm-kernel, alistair23
On Wed, Apr 20, 2022 at 10:27:28PM +1000, Alistair Francis wrote:
> Supporting Ethernet over USB is very useful for debugging. This allows
> debugging systems where the other networking (WiFi or Ethernet) doesn't come
> up, while still allowing SSH access.
>
> This is extreamly useful on the reMarkable 2 as it doesn't have UART RX
> or a physical ethernet port. If WiFi doesn't work this is the next best
> method to access the device.
This should be probably left to users to configure per their needs. And
configfs might be the best default option.
Shawn
>
> Signed-off-by: Alistair Francis <alistair@alistair23.me>
> ---
> arch/arm/configs/imx_v6_v7_defconfig | 10 +++++++---
> 1 file changed, 7 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
> index f7498df08dfe..f9ddaba1aad2 100644
> --- a/arch/arm/configs/imx_v6_v7_defconfig
> +++ b/arch/arm/configs/imx_v6_v7_defconfig
> @@ -349,12 +349,16 @@ CONFIG_USB_CONFIGFS_F_UVC=y
> CONFIG_USB_CONFIGFS_F_PRINTER=y
> CONFIG_USB_ZERO=m
> CONFIG_USB_AUDIO=m
> -CONFIG_USB_ETH=m
> +CONFIG_USB_ETH=y
> CONFIG_USB_G_NCM=m
> -CONFIG_USB_GADGETFS=m
> -CONFIG_USB_FUNCTIONFS=m
> +CONFIG_USB_GADGETFS=y
> +CONFIG_USB_FUNCTIONFS=y
> +CONFIG_USB_FUNCTIONFS_ETH=y
> +CONFIG_USB_FUNCTIONFS_RNDIS=y
> +CONFIG_USB_FUNCTIONFS_GENERIC=y
> CONFIG_USB_MASS_STORAGE=m
> CONFIG_USB_G_SERIAL=m
> +CONFIG_USB_CDC_COMPOSITE=y
> CONFIG_MMC=y
> CONFIG_MMC_SDHCI=y
> CONFIG_MMC_SDHCI_PLTFM=y
> --
> 2.35.1
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] ARM: imx_v6_v7_defconfig: Enable RDNIS by default
@ 2022-05-05 1:52 ` Shawn Guo
0 siblings, 0 replies; 4+ messages in thread
From: Shawn Guo @ 2022-05-05 1:52 UTC (permalink / raw)
To: Alistair Francis
Cc: linux-kernel, linux, s.hauer, linux-arm-kernel, alistair23
On Wed, Apr 20, 2022 at 10:27:28PM +1000, Alistair Francis wrote:
> Supporting Ethernet over USB is very useful for debugging. This allows
> debugging systems where the other networking (WiFi or Ethernet) doesn't come
> up, while still allowing SSH access.
>
> This is extreamly useful on the reMarkable 2 as it doesn't have UART RX
> or a physical ethernet port. If WiFi doesn't work this is the next best
> method to access the device.
This should be probably left to users to configure per their needs. And
configfs might be the best default option.
Shawn
>
> Signed-off-by: Alistair Francis <alistair@alistair23.me>
> ---
> arch/arm/configs/imx_v6_v7_defconfig | 10 +++++++---
> 1 file changed, 7 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
> index f7498df08dfe..f9ddaba1aad2 100644
> --- a/arch/arm/configs/imx_v6_v7_defconfig
> +++ b/arch/arm/configs/imx_v6_v7_defconfig
> @@ -349,12 +349,16 @@ CONFIG_USB_CONFIGFS_F_UVC=y
> CONFIG_USB_CONFIGFS_F_PRINTER=y
> CONFIG_USB_ZERO=m
> CONFIG_USB_AUDIO=m
> -CONFIG_USB_ETH=m
> +CONFIG_USB_ETH=y
> CONFIG_USB_G_NCM=m
> -CONFIG_USB_GADGETFS=m
> -CONFIG_USB_FUNCTIONFS=m
> +CONFIG_USB_GADGETFS=y
> +CONFIG_USB_FUNCTIONFS=y
> +CONFIG_USB_FUNCTIONFS_ETH=y
> +CONFIG_USB_FUNCTIONFS_RNDIS=y
> +CONFIG_USB_FUNCTIONFS_GENERIC=y
> CONFIG_USB_MASS_STORAGE=m
> CONFIG_USB_G_SERIAL=m
> +CONFIG_USB_CDC_COMPOSITE=y
> CONFIG_MMC=y
> CONFIG_MMC_SDHCI=y
> CONFIG_MMC_SDHCI_PLTFM=y
> --
> 2.35.1
>
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2022-05-05 1:53 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2022-04-20 12:27 [PATCH] ARM: imx_v6_v7_defconfig: Enable RDNIS by default Alistair Francis
2022-04-20 12:27 ` Alistair Francis
2022-05-05 1:52 ` Shawn Guo
2022-05-05 1:52 ` Shawn Guo
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.