All of lore.kernel.org
 help / color / mirror / Atom feed
From: Shawn Guo <shawnguo@kernel.org>
To: Alexander Stein <alexander.stein@ew.tq-group.com>
Cc: Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	NXP Linux Team <linux-imx@nxp.com>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 0/4] i.MX8M PWM polarity support
Date: Thu, 5 May 2022 15:47:26 +0800	[thread overview]
Message-ID: <20220505074726.GD14615@dragon> (raw)
In-Reply-To: <20220502094901.251310-1-alexander.stein@ew.tq-group.com>

On Mon, May 02, 2022 at 11:48:57AM +0200, Alexander Stein wrote:
> Hello,
> 
> this patchset adds the possibility to specify a PWM polarity inversion for
> i.MX8M. The pwm-imx27 driver already supports this in the 3rd pwm-cells, but
> the DT for imx8m so far only set #pwm-cells=<2>.
> Add support by setting #pwm-cells=<3> and adding the (default) normal (0)
> polarity to all boards.
> make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/pwm/imx-pwm.yaml
> was used to get all boards.
> 
> Best regards,
> Alexander
> 
> Markus Niebel (4):
>   arm64: dt: imx8mq: support pwm polarity inversion
>   arm64: dt: imx8mm: support pwm polarity inversion
>   arm64: dt: imx8mn: support pwm polarity inversion
>   arm64: dt: imx8mp: support pwm polarity inversion

Applied all, thanks!

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Shawn Guo <shawnguo@kernel.org>
To: Alexander Stein <alexander.stein@ew.tq-group.com>
Cc: Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	NXP Linux Team <linux-imx@nxp.com>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 0/4] i.MX8M PWM polarity support
Date: Thu, 5 May 2022 15:47:26 +0800	[thread overview]
Message-ID: <20220505074726.GD14615@dragon> (raw)
In-Reply-To: <20220502094901.251310-1-alexander.stein@ew.tq-group.com>

On Mon, May 02, 2022 at 11:48:57AM +0200, Alexander Stein wrote:
> Hello,
> 
> this patchset adds the possibility to specify a PWM polarity inversion for
> i.MX8M. The pwm-imx27 driver already supports this in the 3rd pwm-cells, but
> the DT for imx8m so far only set #pwm-cells=<2>.
> Add support by setting #pwm-cells=<3> and adding the (default) normal (0)
> polarity to all boards.
> make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/pwm/imx-pwm.yaml
> was used to get all boards.
> 
> Best regards,
> Alexander
> 
> Markus Niebel (4):
>   arm64: dt: imx8mq: support pwm polarity inversion
>   arm64: dt: imx8mm: support pwm polarity inversion
>   arm64: dt: imx8mn: support pwm polarity inversion
>   arm64: dt: imx8mp: support pwm polarity inversion

Applied all, thanks!

  parent reply	other threads:[~2022-05-05  7:48 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-02  9:48 [PATCH 0/4] i.MX8M PWM polarity support Alexander Stein
2022-05-02  9:48 ` Alexander Stein
2022-05-02  9:48 ` [PATCH 1/4] arm64: dt: imx8mq: support pwm polarity inversion Alexander Stein
2022-05-02  9:48   ` Alexander Stein
2022-05-02  9:48 ` [PATCH 2/4] arm64: dt: imx8mm: " Alexander Stein
2022-05-02  9:48   ` Alexander Stein
2022-05-02  9:49 ` [PATCH 3/4] arm64: dt: imx8mn: " Alexander Stein
2022-05-02  9:49   ` Alexander Stein
2022-05-02  9:49 ` [PATCH 4/4] arm64: dt: imx8mp: " Alexander Stein
2022-05-02  9:49   ` Alexander Stein
2022-05-05  7:47 ` Shawn Guo [this message]
2022-05-05  7:47   ` [PATCH 0/4] i.MX8M PWM polarity support Shawn Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220505074726.GD14615@dragon \
    --to=shawnguo@kernel.org \
    --cc=alexander.stein@ew.tq-group.com \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.