All of lore.kernel.org
 help / color / mirror / Atom feed
From: Aradhya Bhatia <a-bhatia1@ti.com>
To: Vignesh Raghavendra <vigneshr@ti.com>
Cc: Nishanth Menon <nm@ti.com>, Rob Herring <robh+dt@kernel.org>,
	Linux ARM Kernel List <linux-arm-kernel@lists.infradead.org>,
	Devicetree List <devicetree@vger.kernel.org>,
	Linux Kernel List <linux-kernel@vger.kernel.org>,
	Aradhya Bhatia <a-bhatia1@ti.com>, Rahul T R <r-ravikumar@ti.com>
Subject: [PATCH v2 1/4] arm64: dts: ti: k3-am62-main: Add node for Display SubSystem
Date: Thu, 5 May 2022 19:13:00 +0530	[thread overview]
Message-ID: <20220505134303.23208-2-a-bhatia1@ti.com> (raw)
In-Reply-To: <20220505134303.23208-1-a-bhatia1@ti.com>

Add DT node for the Display SubSystem on the am62x soc in cbass_main.
The DSS IP on this soc is compatible with the one on the am65x soc.

The DSS supports one each of video pipeline (vid) and video-lite
pipeline (vidl1). It outputs OLDI signals on one video port (vp1) and
DPI signals on another (vp2). The video ports are connected to the
pipelines via 2 identical overlay managers (ovr1 and ovr2).

Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Reviewed-by: Rahul T R <r-ravikumar@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 30 ++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
index eec8dae65e7c..ff21efa4ffad 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
@@ -515,6 +515,36 @@ cpts@3d000 {
 		};
 	};
 
+	dss: dss@30200000 {
+		compatible = "ti,am65x-dss";
+
+		reg = <0x00 0x30200000 0x00 0x1000>, /* common */
+		      <0x00 0x30202000 0x00 0x1000>, /* vidl1 */
+		      <0x00 0x30206000 0x00 0x1000>, /* vid */
+		      <0x00 0x30207000 0x00 0x1000>, /* ovr1 */
+		      <0x00 0x30208000 0x00 0x1000>, /* ovr2 */
+		      <0x00 0x3020a000 0x00 0x1000>, /* vp1: Used for OLDI */
+		      <0x00 0x3020b000 0x00 0x1000>; /* vp2: Used as DPI Out */
+
+		reg-names = "common", "vidl1", "vid",
+			"ovr1", "ovr2", "vp1", "vp2";
+
+		power-domains = <&k3_pds 186 TI_SCI_PD_EXCLUSIVE>;
+
+		clocks = <&k3_clks 186 4>,
+			 <&k3_clks 186 0>,
+			 <&k3_clks 186 2>;
+
+		clock-names = "fck", "vp1", "vp2";
+
+		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+
+		dss_ports: ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
 	hwspinlock: spinlock@2a000000 {
 		compatible = "ti,am64-hwspinlock";
 		reg = <0x00 0x2a000000 0x00 0x1000>;
-- 
2.36.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Aradhya Bhatia <a-bhatia1@ti.com>
To: Vignesh Raghavendra <vigneshr@ti.com>
Cc: Nishanth Menon <nm@ti.com>, Rob Herring <robh+dt@kernel.org>,
	Linux ARM Kernel List <linux-arm-kernel@lists.infradead.org>,
	Devicetree List <devicetree@vger.kernel.org>,
	Linux Kernel List <linux-kernel@vger.kernel.org>,
	Aradhya Bhatia <a-bhatia1@ti.com>, Rahul T R <r-ravikumar@ti.com>
Subject: [PATCH v2 1/4] arm64: dts: ti: k3-am62-main: Add node for Display SubSystem
Date: Thu, 5 May 2022 19:13:00 +0530	[thread overview]
Message-ID: <20220505134303.23208-2-a-bhatia1@ti.com> (raw)
In-Reply-To: <20220505134303.23208-1-a-bhatia1@ti.com>

Add DT node for the Display SubSystem on the am62x soc in cbass_main.
The DSS IP on this soc is compatible with the one on the am65x soc.

The DSS supports one each of video pipeline (vid) and video-lite
pipeline (vidl1). It outputs OLDI signals on one video port (vp1) and
DPI signals on another (vp2). The video ports are connected to the
pipelines via 2 identical overlay managers (ovr1 and ovr2).

Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Reviewed-by: Rahul T R <r-ravikumar@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 30 ++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
index eec8dae65e7c..ff21efa4ffad 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
@@ -515,6 +515,36 @@ cpts@3d000 {
 		};
 	};
 
+	dss: dss@30200000 {
+		compatible = "ti,am65x-dss";
+
+		reg = <0x00 0x30200000 0x00 0x1000>, /* common */
+		      <0x00 0x30202000 0x00 0x1000>, /* vidl1 */
+		      <0x00 0x30206000 0x00 0x1000>, /* vid */
+		      <0x00 0x30207000 0x00 0x1000>, /* ovr1 */
+		      <0x00 0x30208000 0x00 0x1000>, /* ovr2 */
+		      <0x00 0x3020a000 0x00 0x1000>, /* vp1: Used for OLDI */
+		      <0x00 0x3020b000 0x00 0x1000>; /* vp2: Used as DPI Out */
+
+		reg-names = "common", "vidl1", "vid",
+			"ovr1", "ovr2", "vp1", "vp2";
+
+		power-domains = <&k3_pds 186 TI_SCI_PD_EXCLUSIVE>;
+
+		clocks = <&k3_clks 186 4>,
+			 <&k3_clks 186 0>,
+			 <&k3_clks 186 2>;
+
+		clock-names = "fck", "vp1", "vp2";
+
+		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+
+		dss_ports: ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
 	hwspinlock: spinlock@2a000000 {
 		compatible = "ti,am64-hwspinlock";
 		reg = <0x00 0x2a000000 0x00 0x1000>;
-- 
2.36.0


  reply	other threads:[~2022-05-05 13:44 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-05 13:42 [PATCH v2 0/4] arm64: ti: k3-am62: Add DT nodes to enable Aradhya Bhatia
2022-05-05 13:42 ` Aradhya Bhatia
2022-05-05 13:43 ` Aradhya Bhatia [this message]
2022-05-05 13:43   ` [PATCH v2 1/4] arm64: dts: ti: k3-am62-main: Add node for Display SubSystem Aradhya Bhatia
2022-06-18  1:11   ` Nishanth Menon
2022-06-18  1:11     ` Nishanth Menon
2022-05-05 13:43 ` [PATCH v2 2/4] arm64: dts: ti: k3-am625-sk: Add DSS pinmux info Aradhya Bhatia
2022-05-05 13:43   ` Aradhya Bhatia
2022-05-05 13:43 ` [PATCH v2 3/4] arm64: dts: ti: k3-am625-sk: Update main-i2c1 frequency Aradhya Bhatia
2022-05-05 13:43   ` Aradhya Bhatia
2022-05-05 13:43 ` [PATCH v2 4/4] arm64: dts: ti: k3-am625-sk: Add DSS ports, HDMI tx & peripherals Aradhya Bhatia
2022-05-05 13:43   ` Aradhya Bhatia
2022-05-11  5:18   ` Vignesh Raghavendra
2022-05-11  5:18     ` Vignesh Raghavendra

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220505134303.23208-2-a-bhatia1@ti.com \
    --to=a-bhatia1@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nm@ti.com \
    --cc=r-ravikumar@ti.com \
    --cc=robh+dt@kernel.org \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.