All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andre Przywara <andre.przywara@arm.com>
To: Corentin Labbe <clabbe@baylibre.com>
Cc: alexandre.torgue@foss.st.com, andrew@lunn.ch, broonie@kernel.org,
	calvin.johnson@oss.nxp.com, davem@davemloft.net,
	edumazet@google.com, hkallweit1@gmail.com,
	jernej.skrabec@gmail.com, joabreu@synopsys.com,
	krzysztof.kozlowski+dt@linaro.org, kuba@kernel.org,
	lgirdwood@gmail.com, linux@armlinux.org.uk, pabeni@redhat.com,
	peppe.cavallaro@st.com, robh+dt@kernel.org, samuel@sholland.org,
	wens@csie.org, netdev@vger.kernel.org,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-sunxi@lists.linux.dev
Subject: Re: [PATCH 4/6] ARM: dts: sunxi: move phy regulator in PHY node
Date: Mon, 9 May 2022 11:55:33 +0100	[thread overview]
Message-ID: <20220509115533.1493db30@donnerap.cambridge.arm.com> (raw)
In-Reply-To: <20220509074857.195302-5-clabbe@baylibre.com>

On Mon,  9 May 2022 07:48:55 +0000
Corentin Labbe <clabbe@baylibre.com> wrote:

Hi!

> Now that PHY core can handle regulators, move regulator handle in PHY
> node.

Other than this is somewhat more "correct", is it really needed for those
boards? Because it breaks compatibility with older kernels, so when we
update the DTs in U-Boot, we run into problems (again).

IIUC this series is about the OPi3 & friends, which didn't work with older
kernels anyway, so can we just skip this patch (and 5/6), to just enable
the boards that didn't work before?

Cheers,
Andre

> 
> Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
> ---
>  arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts      | 2 +-
>  arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts  | 2 +-
>  arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts     | 2 +-
>  arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts          | 2 +-
>  arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts      | 2 +-
>  arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts    | 2 +-
>  arch/arm/boot/dts/sun8i-h3-zeropi.dts             | 2 +-
>  arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts | 2 +-
>  arch/arm/boot/dts/sun8i-r40-oka40i-c.dts          | 2 +-
>  arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts | 2 +-
>  arch/arm/boot/dts/sun9i-a80-cubieboard4.dts       | 2 +-
>  arch/arm/boot/dts/sun9i-a80-optimus.dts           | 2 +-
>  arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi     | 2 +-
>  13 files changed, 13 insertions(+), 13 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
> index 5a7e1bd5f825..b450be0a45ed 100644
> --- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
> +++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
> @@ -129,7 +129,6 @@ &ehci0 {
>  &emac {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&emac_rgmii_pins>;
> -	phy-supply = <&reg_sw>;
>  	phy-handle = <&rgmii_phy>;
>  	phy-mode = "rgmii-id";
>  	allwinner,rx-delay-ps = <700>;
> @@ -151,6 +150,7 @@ &mdio {
>  	rgmii_phy: ethernet-phy@1 {
>  		compatible = "ethernet-phy-ieee802.3-c22";
>  		reg = <1>;
> +		phy-supply = <&reg_sw>;
>  	};
>  };
>  
> diff --git a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
> index 870993393fc2..fe70b350cdbb 100644
> --- a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
> +++ b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
> @@ -181,7 +181,6 @@ &ehci1 {
>  &emac {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&emac_rgmii_pins>;
> -	phy-supply = <&reg_dldo4>;
>  	phy-handle = <&rgmii_phy>;
>  	phy-mode = "rgmii-id";
>  	status = "okay";
> @@ -201,6 +200,7 @@ &mdio {
>  	rgmii_phy: ethernet-phy@1 {
>  		compatible = "ethernet-phy-ieee802.3-c22";
>  		reg = <1>;
> +		phy-supply = <&reg_dldo4>;
>  	};
>  };
>  
> diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
> index a2f2ef2b0092..c393612f44c6 100644
> --- a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
> +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
> @@ -103,7 +103,6 @@ &ehci2 {
>  &emac {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&emac_rgmii_pins>;
> -	phy-supply = <&reg_gmac_3v3>;
>  	phy-handle = <&ext_rgmii_phy>;
>  	phy-mode = "rgmii";
>  
> @@ -114,6 +113,7 @@ &external_mdio {
>  	ext_rgmii_phy: ethernet-phy@1 {
>  		compatible = "ethernet-phy-ieee802.3-c22";
>  		reg = <7>;
> +		phy-supply = <&reg_gmac_3v3>;
>  	};
>  };
>  
> diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts
> index 26e2e6172e0d..70bde396856b 100644
> --- a/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts
> +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts
> @@ -80,7 +80,6 @@ &ehci2 {
>  &emac {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&emac_rgmii_pins>;
> -	phy-supply = <&reg_gmac_3v3>;
>  	phy-handle = <&ext_rgmii_phy>;
>  	phy-mode = "rgmii-id";
>  	status = "okay";
> @@ -90,6 +89,7 @@ &external_mdio {
>  	ext_rgmii_phy: ethernet-phy@7 {
>  		compatible = "ethernet-phy-ieee802.3-c22";
>  		reg = <7>;
> +		phy-supply = <&reg_gmac_3v3>;
>  	};
>  };
>  
> diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
> index d05fa679dcd3..c6dcf1af3298 100644
> --- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
> +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
> @@ -83,7 +83,6 @@ &ehci3 {
>  &emac {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&emac_rgmii_pins>;
> -	phy-supply = <&reg_gmac_3v3>;
>  	phy-handle = <&ext_rgmii_phy>;
>  	phy-mode = "rgmii-id";
>  
> @@ -94,6 +93,7 @@ &external_mdio {
>  	ext_rgmii_phy: ethernet-phy@1 {
>  		compatible = "ethernet-phy-ieee802.3-c22";
>  		reg = <0>;
> +		phy-supply = <&reg_gmac_3v3>;
>  	};
>  };
>  
> diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts
> index b6ca45d18e51..61eb8c003186 100644
> --- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts
> +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts
> @@ -65,7 +65,6 @@ reg_gmac_3v3: gmac-3v3 {
>  &emac {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&emac_rgmii_pins>;
> -	phy-supply = <&reg_gmac_3v3>;
>  	phy-handle = <&ext_rgmii_phy>;
>  	phy-mode = "rgmii-id";
>  	status = "okay";
> @@ -75,5 +74,6 @@ &external_mdio {
>  	ext_rgmii_phy: ethernet-phy@1 {
>  		compatible = "ethernet-phy-ieee802.3-c22";
>  		reg = <1>;
> +		phy-supply = <&reg_gmac_3v3>;
>  	};
>  };
> diff --git a/arch/arm/boot/dts/sun8i-h3-zeropi.dts b/arch/arm/boot/dts/sun8i-h3-zeropi.dts
> index 7d3e7323b661..54174ef18823 100644
> --- a/arch/arm/boot/dts/sun8i-h3-zeropi.dts
> +++ b/arch/arm/boot/dts/sun8i-h3-zeropi.dts
> @@ -65,13 +65,13 @@ &external_mdio {
>  	ext_rgmii_phy: ethernet-phy@7 {
>  		compatible = "ethernet-phy-ieee802.3-c22";
>  		reg = <7>;
> +		phy-supply = <&reg_gmac_3v3>;
>  	};
>  };
>  
>  &emac {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&emac_rgmii_pins>;
> -	phy-supply = <&reg_gmac_3v3>;
>  	phy-handle = <&ext_rgmii_phy>;
>  	phy-mode = "rgmii-id";
>  
> diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
> index a6a1087a0c9b..b1f269bbd479 100644
> --- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
> +++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
> @@ -130,7 +130,6 @@ &gmac {
>  	pinctrl-0 = <&gmac_rgmii_pins>;
>  	phy-handle = <&phy1>;
>  	phy-mode = "rgmii-id";
> -	phy-supply = <&reg_dc1sw>;
>  	status = "okay";
>  };
>  
> @@ -138,6 +137,7 @@ &gmac_mdio {
>  	phy1: ethernet-phy@1 {
>  		compatible = "ethernet-phy-ieee802.3-c22";
>  		reg = <1>;
> +		phy-supply = <&reg_dc1sw>;
>  	};
>  };
>  
> diff --git a/arch/arm/boot/dts/sun8i-r40-oka40i-c.dts b/arch/arm/boot/dts/sun8i-r40-oka40i-c.dts
> index 0bd1336206b8..c43476b426df 100644
> --- a/arch/arm/boot/dts/sun8i-r40-oka40i-c.dts
> +++ b/arch/arm/boot/dts/sun8i-r40-oka40i-c.dts
> @@ -93,7 +93,6 @@ &gmac {
>  	pinctrl-0 = <&gmac_rgmii_pins>;
>  	phy-handle = <&phy1>;
>  	phy-mode = "rgmii-id";
> -	phy-supply = <&reg_dcdc1>;
>  	status = "okay";
>  };
>  
> @@ -101,6 +100,7 @@ &gmac_mdio {
>  	phy1: ethernet-phy@1 {
>  		compatible = "ethernet-phy-ieee802.3-c22";
>  		reg = <1>;
> +		phy-supply = <&reg_dcdc1>;
>  	};
>  };
>  
> diff --git a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
> index 47954551f573..050a649d7bda 100644
> --- a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
> +++ b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
> @@ -121,7 +121,6 @@ &gmac {
>  	pinctrl-0 = <&gmac_rgmii_pins>;
>  	phy-handle = <&phy1>;
>  	phy-mode = "rgmii-id";
> -	phy-supply = <&reg_dc1sw>;
>  	status = "okay";
>  };
>  
> @@ -129,6 +128,7 @@ &gmac_mdio {
>  	phy1: ethernet-phy@1 {
>  		compatible = "ethernet-phy-ieee802.3-c22";
>  		reg = <1>;
> +		phy-supply = <&reg_dc1sw>;
>  	};
>  };
>  
> diff --git a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
> index c8ca8cb7f5c9..ab9bf4bf7343 100644
> --- a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
> +++ b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
> @@ -130,7 +130,6 @@ &gmac {
>  	pinctrl-0 = <&gmac_rgmii_pins>;
>  	phy-handle = <&phy1>;
>  	phy-mode = "rgmii-id";
> -	phy-supply = <&reg_cldo1>;
>  	status = "okay";
>  };
>  
> @@ -142,6 +141,7 @@ &i2c3 {
>  
>  &mdio {
>  	phy1: ethernet-phy@1 {
> +		phy-supply = <&reg_cldo1>;
>  		reg = <1>;
>  	};
>  };
> diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts
> index 5c3580d712e4..48219b8049b1 100644
> --- a/arch/arm/boot/dts/sun9i-a80-optimus.dts
> +++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts
> @@ -125,13 +125,13 @@ &gmac {
>  	pinctrl-0 = <&gmac_rgmii_pins>;
>  	phy-handle = <&phy1>;
>  	phy-mode = "rgmii-id";
> -	phy-supply = <&reg_cldo1>;
>  	status = "okay";
>  };
>  
>  &mdio {
>  	phy1: ethernet-phy@1 {
>  		reg = <1>;
> +		phy-supply = <&reg_cldo1>;
>  	};
>  };
>  
> diff --git a/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi b/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi
> index d03f5853ef7b..65f0a3c2af3f 100644
> --- a/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi
> +++ b/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi
> @@ -125,7 +125,6 @@ &ehci2 {
>  &emac {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&emac_rgmii_pins>;
> -	phy-supply = <&reg_gmac_3v3>;
>  	phy-handle = <&ext_rgmii_phy>;
>  	phy-mode = "rgmii-id";
>  
> @@ -136,6 +135,7 @@ &external_mdio {
>  	ext_rgmii_phy: ethernet-phy@1 {
>  		compatible = "ethernet-phy-ieee802.3-c22";
>  		reg = <1>;
> +		phy-supply = <&reg_gmac_3v3>;
>  	};
>  };
>  


WARNING: multiple messages have this Message-ID (diff)
From: Andre Przywara <andre.przywara@arm.com>
To: Corentin Labbe <clabbe@baylibre.com>
Cc: alexandre.torgue@foss.st.com, andrew@lunn.ch, broonie@kernel.org,
	calvin.johnson@oss.nxp.com, davem@davemloft.net,
	edumazet@google.com, hkallweit1@gmail.com,
	jernej.skrabec@gmail.com, joabreu@synopsys.com,
	krzysztof.kozlowski+dt@linaro.org, kuba@kernel.org,
	lgirdwood@gmail.com, linux@armlinux.org.uk, pabeni@redhat.com,
	peppe.cavallaro@st.com, robh+dt@kernel.org, samuel@sholland.org,
	wens@csie.org, netdev@vger.kernel.org,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-sunxi@lists.linux.dev
Subject: Re: [PATCH 4/6] ARM: dts: sunxi: move phy regulator in PHY node
Date: Mon, 9 May 2022 11:55:33 +0100	[thread overview]
Message-ID: <20220509115533.1493db30@donnerap.cambridge.arm.com> (raw)
In-Reply-To: <20220509074857.195302-5-clabbe@baylibre.com>

On Mon,  9 May 2022 07:48:55 +0000
Corentin Labbe <clabbe@baylibre.com> wrote:

Hi!

> Now that PHY core can handle regulators, move regulator handle in PHY
> node.

Other than this is somewhat more "correct", is it really needed for those
boards? Because it breaks compatibility with older kernels, so when we
update the DTs in U-Boot, we run into problems (again).

IIUC this series is about the OPi3 & friends, which didn't work with older
kernels anyway, so can we just skip this patch (and 5/6), to just enable
the boards that didn't work before?

Cheers,
Andre

> 
> Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
> ---
>  arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts      | 2 +-
>  arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts  | 2 +-
>  arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts     | 2 +-
>  arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts          | 2 +-
>  arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts      | 2 +-
>  arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts    | 2 +-
>  arch/arm/boot/dts/sun8i-h3-zeropi.dts             | 2 +-
>  arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts | 2 +-
>  arch/arm/boot/dts/sun8i-r40-oka40i-c.dts          | 2 +-
>  arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts | 2 +-
>  arch/arm/boot/dts/sun9i-a80-cubieboard4.dts       | 2 +-
>  arch/arm/boot/dts/sun9i-a80-optimus.dts           | 2 +-
>  arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi     | 2 +-
>  13 files changed, 13 insertions(+), 13 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
> index 5a7e1bd5f825..b450be0a45ed 100644
> --- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
> +++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
> @@ -129,7 +129,6 @@ &ehci0 {
>  &emac {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&emac_rgmii_pins>;
> -	phy-supply = <&reg_sw>;
>  	phy-handle = <&rgmii_phy>;
>  	phy-mode = "rgmii-id";
>  	allwinner,rx-delay-ps = <700>;
> @@ -151,6 +150,7 @@ &mdio {
>  	rgmii_phy: ethernet-phy@1 {
>  		compatible = "ethernet-phy-ieee802.3-c22";
>  		reg = <1>;
> +		phy-supply = <&reg_sw>;
>  	};
>  };
>  
> diff --git a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
> index 870993393fc2..fe70b350cdbb 100644
> --- a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
> +++ b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
> @@ -181,7 +181,6 @@ &ehci1 {
>  &emac {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&emac_rgmii_pins>;
> -	phy-supply = <&reg_dldo4>;
>  	phy-handle = <&rgmii_phy>;
>  	phy-mode = "rgmii-id";
>  	status = "okay";
> @@ -201,6 +200,7 @@ &mdio {
>  	rgmii_phy: ethernet-phy@1 {
>  		compatible = "ethernet-phy-ieee802.3-c22";
>  		reg = <1>;
> +		phy-supply = <&reg_dldo4>;
>  	};
>  };
>  
> diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
> index a2f2ef2b0092..c393612f44c6 100644
> --- a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
> +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
> @@ -103,7 +103,6 @@ &ehci2 {
>  &emac {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&emac_rgmii_pins>;
> -	phy-supply = <&reg_gmac_3v3>;
>  	phy-handle = <&ext_rgmii_phy>;
>  	phy-mode = "rgmii";
>  
> @@ -114,6 +113,7 @@ &external_mdio {
>  	ext_rgmii_phy: ethernet-phy@1 {
>  		compatible = "ethernet-phy-ieee802.3-c22";
>  		reg = <7>;
> +		phy-supply = <&reg_gmac_3v3>;
>  	};
>  };
>  
> diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts
> index 26e2e6172e0d..70bde396856b 100644
> --- a/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts
> +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts
> @@ -80,7 +80,6 @@ &ehci2 {
>  &emac {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&emac_rgmii_pins>;
> -	phy-supply = <&reg_gmac_3v3>;
>  	phy-handle = <&ext_rgmii_phy>;
>  	phy-mode = "rgmii-id";
>  	status = "okay";
> @@ -90,6 +89,7 @@ &external_mdio {
>  	ext_rgmii_phy: ethernet-phy@7 {
>  		compatible = "ethernet-phy-ieee802.3-c22";
>  		reg = <7>;
> +		phy-supply = <&reg_gmac_3v3>;
>  	};
>  };
>  
> diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
> index d05fa679dcd3..c6dcf1af3298 100644
> --- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
> +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
> @@ -83,7 +83,6 @@ &ehci3 {
>  &emac {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&emac_rgmii_pins>;
> -	phy-supply = <&reg_gmac_3v3>;
>  	phy-handle = <&ext_rgmii_phy>;
>  	phy-mode = "rgmii-id";
>  
> @@ -94,6 +93,7 @@ &external_mdio {
>  	ext_rgmii_phy: ethernet-phy@1 {
>  		compatible = "ethernet-phy-ieee802.3-c22";
>  		reg = <0>;
> +		phy-supply = <&reg_gmac_3v3>;
>  	};
>  };
>  
> diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts
> index b6ca45d18e51..61eb8c003186 100644
> --- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts
> +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts
> @@ -65,7 +65,6 @@ reg_gmac_3v3: gmac-3v3 {
>  &emac {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&emac_rgmii_pins>;
> -	phy-supply = <&reg_gmac_3v3>;
>  	phy-handle = <&ext_rgmii_phy>;
>  	phy-mode = "rgmii-id";
>  	status = "okay";
> @@ -75,5 +74,6 @@ &external_mdio {
>  	ext_rgmii_phy: ethernet-phy@1 {
>  		compatible = "ethernet-phy-ieee802.3-c22";
>  		reg = <1>;
> +		phy-supply = <&reg_gmac_3v3>;
>  	};
>  };
> diff --git a/arch/arm/boot/dts/sun8i-h3-zeropi.dts b/arch/arm/boot/dts/sun8i-h3-zeropi.dts
> index 7d3e7323b661..54174ef18823 100644
> --- a/arch/arm/boot/dts/sun8i-h3-zeropi.dts
> +++ b/arch/arm/boot/dts/sun8i-h3-zeropi.dts
> @@ -65,13 +65,13 @@ &external_mdio {
>  	ext_rgmii_phy: ethernet-phy@7 {
>  		compatible = "ethernet-phy-ieee802.3-c22";
>  		reg = <7>;
> +		phy-supply = <&reg_gmac_3v3>;
>  	};
>  };
>  
>  &emac {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&emac_rgmii_pins>;
> -	phy-supply = <&reg_gmac_3v3>;
>  	phy-handle = <&ext_rgmii_phy>;
>  	phy-mode = "rgmii-id";
>  
> diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
> index a6a1087a0c9b..b1f269bbd479 100644
> --- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
> +++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
> @@ -130,7 +130,6 @@ &gmac {
>  	pinctrl-0 = <&gmac_rgmii_pins>;
>  	phy-handle = <&phy1>;
>  	phy-mode = "rgmii-id";
> -	phy-supply = <&reg_dc1sw>;
>  	status = "okay";
>  };
>  
> @@ -138,6 +137,7 @@ &gmac_mdio {
>  	phy1: ethernet-phy@1 {
>  		compatible = "ethernet-phy-ieee802.3-c22";
>  		reg = <1>;
> +		phy-supply = <&reg_dc1sw>;
>  	};
>  };
>  
> diff --git a/arch/arm/boot/dts/sun8i-r40-oka40i-c.dts b/arch/arm/boot/dts/sun8i-r40-oka40i-c.dts
> index 0bd1336206b8..c43476b426df 100644
> --- a/arch/arm/boot/dts/sun8i-r40-oka40i-c.dts
> +++ b/arch/arm/boot/dts/sun8i-r40-oka40i-c.dts
> @@ -93,7 +93,6 @@ &gmac {
>  	pinctrl-0 = <&gmac_rgmii_pins>;
>  	phy-handle = <&phy1>;
>  	phy-mode = "rgmii-id";
> -	phy-supply = <&reg_dcdc1>;
>  	status = "okay";
>  };
>  
> @@ -101,6 +100,7 @@ &gmac_mdio {
>  	phy1: ethernet-phy@1 {
>  		compatible = "ethernet-phy-ieee802.3-c22";
>  		reg = <1>;
> +		phy-supply = <&reg_dcdc1>;
>  	};
>  };
>  
> diff --git a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
> index 47954551f573..050a649d7bda 100644
> --- a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
> +++ b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
> @@ -121,7 +121,6 @@ &gmac {
>  	pinctrl-0 = <&gmac_rgmii_pins>;
>  	phy-handle = <&phy1>;
>  	phy-mode = "rgmii-id";
> -	phy-supply = <&reg_dc1sw>;
>  	status = "okay";
>  };
>  
> @@ -129,6 +128,7 @@ &gmac_mdio {
>  	phy1: ethernet-phy@1 {
>  		compatible = "ethernet-phy-ieee802.3-c22";
>  		reg = <1>;
> +		phy-supply = <&reg_dc1sw>;
>  	};
>  };
>  
> diff --git a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
> index c8ca8cb7f5c9..ab9bf4bf7343 100644
> --- a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
> +++ b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
> @@ -130,7 +130,6 @@ &gmac {
>  	pinctrl-0 = <&gmac_rgmii_pins>;
>  	phy-handle = <&phy1>;
>  	phy-mode = "rgmii-id";
> -	phy-supply = <&reg_cldo1>;
>  	status = "okay";
>  };
>  
> @@ -142,6 +141,7 @@ &i2c3 {
>  
>  &mdio {
>  	phy1: ethernet-phy@1 {
> +		phy-supply = <&reg_cldo1>;
>  		reg = <1>;
>  	};
>  };
> diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts
> index 5c3580d712e4..48219b8049b1 100644
> --- a/arch/arm/boot/dts/sun9i-a80-optimus.dts
> +++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts
> @@ -125,13 +125,13 @@ &gmac {
>  	pinctrl-0 = <&gmac_rgmii_pins>;
>  	phy-handle = <&phy1>;
>  	phy-mode = "rgmii-id";
> -	phy-supply = <&reg_cldo1>;
>  	status = "okay";
>  };
>  
>  &mdio {
>  	phy1: ethernet-phy@1 {
>  		reg = <1>;
> +		phy-supply = <&reg_cldo1>;
>  	};
>  };
>  
> diff --git a/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi b/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi
> index d03f5853ef7b..65f0a3c2af3f 100644
> --- a/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi
> +++ b/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi
> @@ -125,7 +125,6 @@ &ehci2 {
>  &emac {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&emac_rgmii_pins>;
> -	phy-supply = <&reg_gmac_3v3>;
>  	phy-handle = <&ext_rgmii_phy>;
>  	phy-mode = "rgmii-id";
>  
> @@ -136,6 +135,7 @@ &external_mdio {
>  	ext_rgmii_phy: ethernet-phy@1 {
>  		compatible = "ethernet-phy-ieee802.3-c22";
>  		reg = <1>;
> +		phy-supply = <&reg_gmac_3v3>;
>  	};
>  };
>  


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2022-05-09 10:55 UTC|newest]

Thread overview: 50+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-09  7:48 [PATCH 0/6] arm64: add ethernet to orange pi 3 Corentin Labbe
2022-05-09  7:48 ` Corentin Labbe
2022-05-09  7:48 ` [PATCH 1/6] phy: handle optional regulator for PHY Corentin Labbe
2022-05-09  7:48   ` Corentin Labbe
2022-05-09  7:48 ` [PATCH 2/6] net: stmmac: dwmac-sun8i: remove regulator Corentin Labbe
2022-05-09  7:48   ` Corentin Labbe
2022-05-09 14:09   ` Andre Przywara
2022-05-09 14:09     ` Andre Przywara
2022-05-09 14:38     ` LABBE Corentin
2022-05-09 14:38       ` LABBE Corentin
2022-05-09  7:48 ` [PATCH 3/6] dt-bindings: net: Add documentation for phy-supply Corentin Labbe
2022-05-09  7:48   ` Corentin Labbe
2022-05-09 12:17   ` Andrew Lunn
2022-05-09 12:17     ` Andrew Lunn
2022-05-09 13:26     ` LABBE Corentin
2022-05-09 13:26       ` LABBE Corentin
2022-05-09 16:02       ` Andrew Lunn
2022-05-09 16:02         ` Andrew Lunn
2022-05-09 16:12         ` Mark Brown
2022-05-09 16:12           ` Mark Brown
2022-05-09 16:38           ` Andrew Lunn
2022-05-09 16:38             ` Andrew Lunn
2022-05-09 16:56             ` Mark Brown
2022-05-09 16:56               ` Mark Brown
2022-05-11  8:02               ` LABBE Corentin
2022-05-11  8:02                 ` LABBE Corentin
2022-05-11 12:50                 ` Mark Brown
2022-05-11 12:50                   ` Mark Brown
2022-05-17  0:47             ` Rob Herring
2022-05-17  0:47               ` Rob Herring
2022-05-09  7:48 ` [PATCH 4/6] ARM: dts: sunxi: move phy regulator in PHY node Corentin Labbe
2022-05-09  7:48   ` Corentin Labbe
2022-05-09 10:55   ` Andre Przywara [this message]
2022-05-09 10:55     ` Andre Przywara
2022-05-09 11:16     ` LABBE Corentin
2022-05-09 11:16       ` LABBE Corentin
2022-05-09  7:48 ` [PATCH 5/6] arm64: dts: allwinner: " Corentin Labbe
2022-05-09  7:48   ` Corentin Labbe
2022-05-09  7:48 ` [PATCH 6/6] arm64: dts: allwinner: orange-pi-3: Enable ethernet Corentin Labbe
2022-05-09  7:48   ` Corentin Labbe
2022-05-09 12:20 ` [PATCH 0/6] arm64: add ethernet to orange pi 3 Andrew Lunn
2022-05-09 12:20   ` Andrew Lunn
2022-05-09 13:27   ` LABBE Corentin
2022-05-09 13:27     ` LABBE Corentin
2022-05-09 15:19     ` Andrew Lunn
2022-05-09 15:19       ` Andrew Lunn
2022-05-09 15:24       ` LABBE Corentin
2022-05-09 15:24         ` LABBE Corentin
2022-05-09 15:56         ` Mark Brown
2022-05-09 15:56           ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220509115533.1493db30@donnerap.cambridge.arm.com \
    --to=andre.przywara@arm.com \
    --cc=alexandre.torgue@foss.st.com \
    --cc=andrew@lunn.ch \
    --cc=broonie@kernel.org \
    --cc=calvin.johnson@oss.nxp.com \
    --cc=clabbe@baylibre.com \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=edumazet@google.com \
    --cc=hkallweit1@gmail.com \
    --cc=jernej.skrabec@gmail.com \
    --cc=joabreu@synopsys.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=kuba@kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@lists.linux.dev \
    --cc=linux@armlinux.org.uk \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=peppe.cavallaro@st.com \
    --cc=robh+dt@kernel.org \
    --cc=samuel@sholland.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.