From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Shravya Kumbham <shravya.kumbham@xilinx.com>,
Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>,
Andrew Lunn <andrew@lunn.ch>, Paolo Abeni <pabeni@redhat.com>,
Sasha Levin <sashal@kernel.org>,
davem@davemloft.net, edumazet@google.com, kuba@kernel.org,
michal.simek@xilinx.com, arnd@arndb.de, yuehaibing@huawei.com,
prabhakar.mahadev-lad.rj@bp.renesas.com, linmq006@gmail.com,
netdev@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCH AUTOSEL 5.17 11/21] net: emaclite: Don't advertise 1000BASE-T and do auto negotiation
Date: Tue, 10 May 2022 11:43:30 -0400 [thread overview]
Message-ID: <20220510154340.153400-11-sashal@kernel.org> (raw)
In-Reply-To: <20220510154340.153400-1-sashal@kernel.org>
From: Shravya Kumbham <shravya.kumbham@xilinx.com>
[ Upstream commit b800528b97d0adc3a5ba42d78a8b0d3f07a31f44 ]
In xemaclite_open() function we are setting the max speed of
emaclite to 100Mb using phy_set_max_speed() function so,
there is no need to write the advertising registers to stop
giga-bit speed and the phy_start() function starts the
auto-negotiation so, there is no need to handle it separately
using advertising registers. Remove the phy_read and phy_write
of advertising registers in xemaclite_open() function.
Signed-off-by: Shravya Kumbham <shravya.kumbham@xilinx.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/xilinx/xilinx_emaclite.c | 15 ---------------
1 file changed, 15 deletions(-)
diff --git a/drivers/net/ethernet/xilinx/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
index 77fa2cb03aca..29e942cd3c44 100644
--- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c
+++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
@@ -926,8 +926,6 @@ static int xemaclite_open(struct net_device *dev)
xemaclite_disable_interrupts(lp);
if (lp->phy_node) {
- u32 bmcr;
-
lp->phy_dev = of_phy_connect(lp->ndev, lp->phy_node,
xemaclite_adjust_link, 0,
PHY_INTERFACE_MODE_MII);
@@ -938,19 +936,6 @@ static int xemaclite_open(struct net_device *dev)
/* EmacLite doesn't support giga-bit speeds */
phy_set_max_speed(lp->phy_dev, SPEED_100);
-
- /* Don't advertise 1000BASE-T Full/Half duplex speeds */
- phy_write(lp->phy_dev, MII_CTRL1000, 0);
-
- /* Advertise only 10 and 100mbps full/half duplex speeds */
- phy_write(lp->phy_dev, MII_ADVERTISE, ADVERTISE_ALL |
- ADVERTISE_CSMA);
-
- /* Restart auto negotiation */
- bmcr = phy_read(lp->phy_dev, MII_BMCR);
- bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART);
- phy_write(lp->phy_dev, MII_BMCR, bmcr);
-
phy_start(lp->phy_dev);
}
--
2.35.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Shravya Kumbham <shravya.kumbham@xilinx.com>,
Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>,
Andrew Lunn <andrew@lunn.ch>, Paolo Abeni <pabeni@redhat.com>,
Sasha Levin <sashal@kernel.org>,
davem@davemloft.net, edumazet@google.com, kuba@kernel.org,
michal.simek@xilinx.com, arnd@arndb.de, yuehaibing@huawei.com,
prabhakar.mahadev-lad.rj@bp.renesas.com, linmq006@gmail.com,
netdev@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCH AUTOSEL 5.17 11/21] net: emaclite: Don't advertise 1000BASE-T and do auto negotiation
Date: Tue, 10 May 2022 11:43:30 -0400 [thread overview]
Message-ID: <20220510154340.153400-11-sashal@kernel.org> (raw)
In-Reply-To: <20220510154340.153400-1-sashal@kernel.org>
From: Shravya Kumbham <shravya.kumbham@xilinx.com>
[ Upstream commit b800528b97d0adc3a5ba42d78a8b0d3f07a31f44 ]
In xemaclite_open() function we are setting the max speed of
emaclite to 100Mb using phy_set_max_speed() function so,
there is no need to write the advertising registers to stop
giga-bit speed and the phy_start() function starts the
auto-negotiation so, there is no need to handle it separately
using advertising registers. Remove the phy_read and phy_write
of advertising registers in xemaclite_open() function.
Signed-off-by: Shravya Kumbham <shravya.kumbham@xilinx.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/xilinx/xilinx_emaclite.c | 15 ---------------
1 file changed, 15 deletions(-)
diff --git a/drivers/net/ethernet/xilinx/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
index 77fa2cb03aca..29e942cd3c44 100644
--- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c
+++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
@@ -926,8 +926,6 @@ static int xemaclite_open(struct net_device *dev)
xemaclite_disable_interrupts(lp);
if (lp->phy_node) {
- u32 bmcr;
-
lp->phy_dev = of_phy_connect(lp->ndev, lp->phy_node,
xemaclite_adjust_link, 0,
PHY_INTERFACE_MODE_MII);
@@ -938,19 +936,6 @@ static int xemaclite_open(struct net_device *dev)
/* EmacLite doesn't support giga-bit speeds */
phy_set_max_speed(lp->phy_dev, SPEED_100);
-
- /* Don't advertise 1000BASE-T Full/Half duplex speeds */
- phy_write(lp->phy_dev, MII_CTRL1000, 0);
-
- /* Advertise only 10 and 100mbps full/half duplex speeds */
- phy_write(lp->phy_dev, MII_ADVERTISE, ADVERTISE_ALL |
- ADVERTISE_CSMA);
-
- /* Restart auto negotiation */
- bmcr = phy_read(lp->phy_dev, MII_BMCR);
- bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART);
- phy_write(lp->phy_dev, MII_BMCR, bmcr);
-
phy_start(lp->phy_dev);
}
--
2.35.1
next prev parent reply other threads:[~2022-05-10 15:45 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-10 15:43 [PATCH AUTOSEL 5.17 01/21] hwmon: (asus_wmi_sensors) Fix CROSSHAIR VI HERO name Sasha Levin
2022-05-10 15:43 ` [PATCH AUTOSEL 5.17 02/21] hwmon: (f71882fg) Fix negative temperature Sasha Levin
2022-05-10 15:43 ` [PATCH AUTOSEL 5.17 03/21] RDMA/irdma: Fix deadlock in irdma_cleanup_cm_core() Sasha Levin
2022-05-10 15:43 ` [PATCH AUTOSEL 5.17 04/21] iommu: arm-smmu: disable large page mappings for Nvidia arm-smmu Sasha Levin
2022-05-10 15:43 ` Sasha Levin
2022-05-10 15:43 ` Sasha Levin
2022-05-10 15:43 ` [PATCH AUTOSEL 5.17 05/21] ASoC: max98090: Reject invalid values in custom control put() Sasha Levin
2022-05-10 15:43 ` Sasha Levin
2022-05-10 15:43 ` [PATCH AUTOSEL 5.17 06/21] ASoC: max98090: Generate notifications on changes for custom control Sasha Levin
2022-05-10 15:43 ` Sasha Levin
2022-05-10 15:43 ` [PATCH AUTOSEL 5.17 07/21] ASoC: ops: Validate input values in snd_soc_put_volsw_range() Sasha Levin
2022-05-10 15:43 ` Sasha Levin
2022-05-10 15:43 ` [PATCH AUTOSEL 5.17 08/21] s390: disable -Warray-bounds Sasha Levin
2022-05-10 15:43 ` [PATCH AUTOSEL 5.17 09/21] ASoC: SOF: Fix NULL pointer exception in sof_pci_probe callback Sasha Levin
2022-05-10 15:43 ` Sasha Levin
2022-05-10 15:43 ` [PATCH AUTOSEL 5.17 10/21] io_uring: assign non-fixed early for async work Sasha Levin
2022-05-10 15:43 ` Sasha Levin [this message]
2022-05-10 15:43 ` [PATCH AUTOSEL 5.17 11/21] net: emaclite: Don't advertise 1000BASE-T and do auto negotiation Sasha Levin
2022-05-10 15:43 ` [PATCH AUTOSEL 5.17 12/21] net: sfp: Add tx-fault workaround for Huawei MA5671A SFP ONT Sasha Levin
2022-05-10 15:43 ` [PATCH AUTOSEL 5.17 13/21] secure_seq: use the 64 bits of the siphash for port offset calculation Sasha Levin
2022-05-10 15:43 ` [PATCH AUTOSEL 5.17 14/21] tcp: use different parts of the port_offset for index and offset Sasha Levin
2022-05-10 15:43 ` [PATCH AUTOSEL 5.17 15/21] tcp: resalt the secret every 10 seconds Sasha Levin
2022-05-10 15:43 ` [PATCH AUTOSEL 5.17 16/21] tcp: add small random increments to the source port Sasha Levin
2022-05-10 15:43 ` [PATCH AUTOSEL 5.17 17/21] tcp: dynamically allocate the perturb table used by source ports Sasha Levin
2022-05-10 15:43 ` [PATCH AUTOSEL 5.17 18/21] tcp: increase source port perturb table to 2^16 Sasha Levin
2022-05-10 15:43 ` [PATCH AUTOSEL 5.17 19/21] tcp: drop the hash_32() part from the index calculation Sasha Levin
2022-05-10 15:43 ` [PATCH AUTOSEL 5.17 20/21] block: Do not call folio_next() on an unreferenced folio Sasha Levin
2022-05-10 17:29 ` Matthew Wilcox
2022-05-10 15:43 ` [PATCH AUTOSEL 5.17 21/21] Revert "parisc: Fix patch code locking and flushing" Sasha Levin
2022-05-10 15:49 ` Helge Deller
2022-05-14 16:24 ` Sasha Levin
2022-05-14 16:47 ` John David Anglin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220510154340.153400-11-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=andrew@lunn.ch \
--cc=arnd@arndb.de \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=kuba@kernel.org \
--cc=linmq006@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=michal.simek@xilinx.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=radhey.shyam.pandey@xilinx.com \
--cc=shravya.kumbham@xilinx.com \
--cc=stable@vger.kernel.org \
--cc=yuehaibing@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.