All of lore.kernel.org
 help / color / mirror / Atom feed
From: Max Krummenacher <max.oss.09@gmail.com>
To: max.krummenacher@toradex.com
Cc: Fabio Estevam <festevam@gmail.com>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	NXP Linux Team <linux-imx@nxp.com>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Rob Herring <robh+dt@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Shawn Guo <shawnguo@kernel.org>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v3 4/4] ARM: dts: imx6qdl-colibri: backlight pwm: Adapt brightness steps
Date: Fri, 13 May 2022 12:26:15 +0200	[thread overview]
Message-ID: <20220513102616.48040-5-max.oss.09@gmail.com> (raw)
In-Reply-To: <20220513102616.48040-1-max.oss.09@gmail.com>

From: Max Krummenacher <max.krummenacher@toradex.com>

Adapt the brightness steps as the backlight doesn't light up
for very low duty cycles.

Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>

---

(no changes since v2)

Changes in v2:
- add reviewed-by tags
- Split the Backlight PWM patch into two patches, a) #pwm-cells 3, b) adapt brightness steps
- Split to two patches as proposed by Fabio Estevam

 arch/arm/boot/dts/imx6qdl-colibri.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
index d91fae92c90a..023e76215064 100644
--- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
@@ -14,8 +14,8 @@
 
 	backlight: backlight {
 		compatible = "pwm-backlight";
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
+		brightness-levels = <0 45 63 88 119 158 203 255>;
+		default-brightness-level = <4>;
 		enable-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* Colibri BL_ON */
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_bl_on>;
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Max Krummenacher <max.oss.09@gmail.com>
To: max.krummenacher@toradex.com
Cc: Fabio Estevam <festevam@gmail.com>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	NXP Linux Team <linux-imx@nxp.com>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Rob Herring <robh+dt@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Shawn Guo <shawnguo@kernel.org>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v3 4/4] ARM: dts: imx6qdl-colibri: backlight pwm: Adapt brightness steps
Date: Fri, 13 May 2022 12:26:15 +0200	[thread overview]
Message-ID: <20220513102616.48040-5-max.oss.09@gmail.com> (raw)
In-Reply-To: <20220513102616.48040-1-max.oss.09@gmail.com>

From: Max Krummenacher <max.krummenacher@toradex.com>

Adapt the brightness steps as the backlight doesn't light up
for very low duty cycles.

Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>

---

(no changes since v2)

Changes in v2:
- add reviewed-by tags
- Split the Backlight PWM patch into two patches, a) #pwm-cells 3, b) adapt brightness steps
- Split to two patches as proposed by Fabio Estevam

 arch/arm/boot/dts/imx6qdl-colibri.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
index d91fae92c90a..023e76215064 100644
--- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
@@ -14,8 +14,8 @@
 
 	backlight: backlight {
 		compatible = "pwm-backlight";
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
+		brightness-levels = <0 45 63 88 119 158 203 255>;
+		default-brightness-level = <4>;
 		enable-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* Colibri BL_ON */
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_bl_on>;
-- 
2.20.1


  parent reply	other threads:[~2022-05-13 10:28 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-13 10:26 [PATCH v3 0/4] ARM: dts: imx6dl-colibri: Unify with changes to Apalis iMX6 device trees Max Krummenacher
2022-05-13 10:26 ` Max Krummenacher
2022-05-13 10:26 ` [PATCH v3 1/4] ARM: dts: imx6qdl-colibri: Fix capacitive touch reset polarity Max Krummenacher
2022-05-13 10:26   ` Max Krummenacher
2022-05-13 10:26 ` [PATCH v3 2/4] ARM: dts: imx6qdl-colibri: Mux mclk for sgtl5000 with the codec node Max Krummenacher
2022-05-13 10:26   ` Max Krummenacher
2022-05-13 10:26 ` [PATCH v3 3/4] ARM: dts: imx6qdl-colibri: backlight pwm: Simplify inverted backlight Max Krummenacher
2022-05-13 10:26   ` Max Krummenacher
2022-05-13 10:53   ` Fabio Estevam
2022-05-13 10:53     ` Fabio Estevam
2022-05-13 10:26 ` Max Krummenacher [this message]
2022-05-13 10:26   ` [PATCH v3 4/4] ARM: dts: imx6qdl-colibri: backlight pwm: Adapt brightness steps Max Krummenacher
2022-06-11  8:51 ` [PATCH v3 0/4] ARM: dts: imx6dl-colibri: Unify with changes to Apalis iMX6 device trees Shawn Guo
2022-06-11  8:51   ` Shawn Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220513102616.48040-5-max.oss.09@gmail.com \
    --to=max.oss.09@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=max.krummenacher@toradex.com \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.