From: Sakari Ailus <sakari.ailus@linux.intel.com>
To: linux-media@vger.kernel.org
Cc: Jacopo Mondi <jacopo@jmondi.org>,
Steve Longerbeam <slongerbeam@gmail.com>,
laurent.pinchart@ideasonboard.com, hverkuil-cisco@xs4all.nl,
mirela.rabulea@nxp.com, xavier.roumegue@oss.nxp.com,
tomi.valkeinen@ideasonboard.com, hugues.fruchet@st.com,
prabhakar.mahadev-lad.rj@bp.renesas.com, aford173@gmail.com,
festevam@gmail.com, Eugen.Hristev@microchip.com,
jbrunet@baylibre.com, paul.elder@ideasonboard.com,
eddy.khan@vergesense.com,
Mauro Carvalho Chehab <mchehab@kernel.org>
Subject: [PATCH v7 00/28] media: ov5640: Rework the clock tree programming for MIPI
Date: Fri, 13 May 2022 17:15:20 +0300 [thread overview]
Message-ID: <20220513141548.6344-1-sakari.ailus@linux.intel.com> (raw)
Hi folks,
Reworked the internals a little so that no compile warnings are produced
for intermediate patches. In the past we've allowed them but now with
warnings considered as errors, this is a problem.
The end result is unchanged. Still testing for compilation.
I'm still sending this all to list as several patches got changed:
media: ov5640: Associate bpp with formats
media: ov5640: Rework CSI-2 clock tree
media: ov5640: Split DVP and CSI-2 formats
Hugues Fruchet (1):
media: ov5640: Adjust vblank with s_frame_interval
Jacopo Mondi (27):
media: ov5640: Add pixel rate to modes
media: ov5640: Re-arrange modes definition
media: ov5640: Add ov5640_is_csi2() function
media: ov5640: Associate bpp with formats
media: ov5640: Add LINK_FREQ control
media: ov5640: Update pixel_rate and link_freq
media: ov5640: Rework CSI-2 clock tree
media: ov5640: Rework timings programming
media: ov5640: Fix 720x480 in RGB888 mode
media: ov5640: Split DVP and CSI-2 timings
media: ov5640: Provide timings accessor
media: ov5640: Re-sort per-mode register tables
media: ov5640: Remove duplicated mode settings
media: ov5640: Remove ov5640_mode_init_data
media: ov5640: Add HBLANK control
media: ov5640: Add VBLANK control
media: ov5640: Remove frame rate check from find_mode()
media: ov5640: Change CSI-2 timings to comply with FPS
media: ov5640: Implement init_cfg
media: ov5640: Implement get_selection
media: ov5640: Register device properties
media: ov5640: Add RGB565_1X16 format
media: ov5640: Add BGR888 format
media: ov5640: Restrict sizes to mbus code
media: ov5640: Adjust format to bpp in s_fmt
media: ov5640: Split DVP and CSI-2 formats
media: ov5640: Move format mux config in format
drivers/media/i2c/ov5640.c | 1650 ++++++++++++++++++++++++++----------
1 file changed, 1188 insertions(+), 462 deletions(-)
--
2.30.2
next reply other threads:[~2022-05-13 14:16 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-13 14:15 Sakari Ailus [this message]
2022-05-13 14:15 ` [PATCH v7 01/28] media: ov5640: Add pixel rate to modes Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 02/28] media: ov5640: Re-arrange modes definition Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 03/28] media: ov5640: Add ov5640_is_csi2() function Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 04/28] media: ov5640: Associate bpp with formats Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 05/28] media: ov5640: Add LINK_FREQ control Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 06/28] media: ov5640: Update pixel_rate and link_freq Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 07/28] media: ov5640: Rework CSI-2 clock tree Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 08/28] media: ov5640: Rework timings programming Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 09/28] media: ov5640: Fix 720x480 in RGB888 mode Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 10/28] media: ov5640: Split DVP and CSI-2 timings Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 11/28] media: ov5640: Provide timings accessor Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 12/28] media: ov5640: Re-sort per-mode register tables Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 13/28] media: ov5640: Remove duplicated mode settings Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 14/28] media: ov5640: Remove ov5640_mode_init_data Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 15/28] media: ov5640: Add HBLANK control Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 16/28] media: ov5640: Add VBLANK control Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 17/28] media: ov5640: Adjust vblank with s_frame_interval Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 18/28] media: ov5640: Remove frame rate check from find_mode() Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 19/28] media: ov5640: Change CSI-2 timings to comply with FPS Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 20/28] media: ov5640: Implement init_cfg Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 21/28] media: ov5640: Implement get_selection Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 22/28] media: ov5640: Register device properties Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 23/28] media: ov5640: Add RGB565_1X16 format Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 24/28] media: ov5640: Add BGR888 format Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 25/28] media: ov5640: Restrict sizes to mbus code Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 26/28] media: ov5640: Adjust format to bpp in s_fmt Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 27/28] media: ov5640: Split DVP and CSI-2 formats Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 28/28] media: ov5640: Move format mux config in format Sakari Ailus
2022-05-13 14:24 ` [PATCH v7 00/28] media: ov5640: Rework the clock tree programming for MIPI Jacopo Mondi
-- strict thread matches above, loose matches on Subject: below --
2022-05-13 14:13 Jacopo Mondi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220513141548.6344-1-sakari.ailus@linux.intel.com \
--to=sakari.ailus@linux.intel.com \
--cc=Eugen.Hristev@microchip.com \
--cc=aford173@gmail.com \
--cc=eddy.khan@vergesense.com \
--cc=festevam@gmail.com \
--cc=hugues.fruchet@st.com \
--cc=hverkuil-cisco@xs4all.nl \
--cc=jacopo@jmondi.org \
--cc=jbrunet@baylibre.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=mirela.rabulea@nxp.com \
--cc=paul.elder@ideasonboard.com \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=slongerbeam@gmail.com \
--cc=tomi.valkeinen@ideasonboard.com \
--cc=xavier.roumegue@oss.nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.