From: Sakari Ailus <sakari.ailus@linux.intel.com>
To: linux-media@vger.kernel.org
Cc: Jacopo Mondi <jacopo@jmondi.org>,
Steve Longerbeam <slongerbeam@gmail.com>,
laurent.pinchart@ideasonboard.com, hverkuil-cisco@xs4all.nl,
mirela.rabulea@nxp.com, xavier.roumegue@oss.nxp.com,
tomi.valkeinen@ideasonboard.com, hugues.fruchet@st.com,
prabhakar.mahadev-lad.rj@bp.renesas.com, aford173@gmail.com,
festevam@gmail.com, Eugen.Hristev@microchip.com,
jbrunet@baylibre.com, paul.elder@ideasonboard.com,
eddy.khan@vergesense.com,
Mauro Carvalho Chehab <mchehab@kernel.org>
Subject: [PATCH v7 12/28] media: ov5640: Re-sort per-mode register tables
Date: Fri, 13 May 2022 17:15:32 +0300 [thread overview]
Message-ID: <20220513141548.6344-13-sakari.ailus@linux.intel.com> (raw)
In-Reply-To: <20220513141548.6344-1-sakari.ailus@linux.intel.com>
From: Jacopo Mondi <jacopo@jmondi.org>
The per-mode register tables are not sorted by size. Fix it.
Cosmetic change only.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Acked-by: Hugues Fruchet <hugues.fruchet@foss.st.com>
Tested-by: Hugues Fruchet <hugues.fruchet@foss.st.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
---
drivers/media/i2c/ov5640.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
index 936ee62eb2ab7..a7421274c3303 100644
--- a/drivers/media/i2c/ov5640.c
+++ b/drivers/media/i2c/ov5640.c
@@ -484,7 +484,7 @@ static const struct reg_value ov5640_init_setting_30fps_VGA[] = {
{0x3a1f, 0x14, 0, 0}, {0x3008, 0x02, 0, 0}, {0x3c00, 0x04, 0, 300},
};
-static const struct reg_value ov5640_setting_VGA_640_480[] = {
+static const struct reg_value ov5640_setting_QQVGA_160_120[] = {
{0x3c07, 0x08, 0, 0},
{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
{0x3814, 0x31, 0, 0},
@@ -495,11 +495,10 @@ static const struct reg_value ov5640_setting_VGA_640_480[] = {
{0x3a0a, 0x00, 0, 0}, {0x3a0b, 0xf6, 0, 0}, {0x3a0e, 0x03, 0, 0},
{0x3a0d, 0x04, 0, 0}, {0x3a14, 0x03, 0, 0}, {0x3a15, 0xd8, 0, 0},
{0x4001, 0x02, 0, 0}, {0x4004, 0x02, 0, 0},
- {0x4407, 0x04, 0, 0}, {0x460b, 0x35, 0, 0}, {0x460c, 0x22, 0, 0},
- {0x3824, 0x02, 0, 0}, {0x5001, 0xa3, 0, 0},
+ {0x4407, 0x04, 0, 0}, {0x5001, 0xa3, 0, 0},
};
-static const struct reg_value ov5640_setting_XGA_1024_768[] = {
+static const struct reg_value ov5640_setting_QCIF_176_144[] = {
{0x3c07, 0x08, 0, 0},
{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
{0x3814, 0x31, 0, 0},
@@ -529,7 +528,7 @@ static const struct reg_value ov5640_setting_QVGA_320_240[] = {
{0x3824, 0x02, 0, 0}, {0x5001, 0xa3, 0, 0},
};
-static const struct reg_value ov5640_setting_QQVGA_160_120[] = {
+static const struct reg_value ov5640_setting_VGA_640_480[] = {
{0x3c07, 0x08, 0, 0},
{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
{0x3814, 0x31, 0, 0},
@@ -540,10 +539,11 @@ static const struct reg_value ov5640_setting_QQVGA_160_120[] = {
{0x3a0a, 0x00, 0, 0}, {0x3a0b, 0xf6, 0, 0}, {0x3a0e, 0x03, 0, 0},
{0x3a0d, 0x04, 0, 0}, {0x3a14, 0x03, 0, 0}, {0x3a15, 0xd8, 0, 0},
{0x4001, 0x02, 0, 0}, {0x4004, 0x02, 0, 0},
- {0x4407, 0x04, 0, 0}, {0x5001, 0xa3, 0, 0},
+ {0x4407, 0x04, 0, 0}, {0x460b, 0x35, 0, 0}, {0x460c, 0x22, 0, 0},
+ {0x3824, 0x02, 0, 0}, {0x5001, 0xa3, 0, 0},
};
-static const struct reg_value ov5640_setting_QCIF_176_144[] = {
+static const struct reg_value ov5640_setting_NTSC_720_480[] = {
{0x3c07, 0x08, 0, 0},
{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
{0x3814, 0x31, 0, 0},
@@ -558,7 +558,7 @@ static const struct reg_value ov5640_setting_QCIF_176_144[] = {
{0x3824, 0x02, 0, 0}, {0x5001, 0xa3, 0, 0},
};
-static const struct reg_value ov5640_setting_NTSC_720_480[] = {
+static const struct reg_value ov5640_setting_PAL_720_576[] = {
{0x3c07, 0x08, 0, 0},
{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
{0x3814, 0x31, 0, 0},
@@ -573,7 +573,7 @@ static const struct reg_value ov5640_setting_NTSC_720_480[] = {
{0x3824, 0x02, 0, 0}, {0x5001, 0xa3, 0, 0},
};
-static const struct reg_value ov5640_setting_PAL_720_576[] = {
+static const struct reg_value ov5640_setting_XGA_1024_768[] = {
{0x3c07, 0x08, 0, 0},
{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
{0x3814, 0x31, 0, 0},
--
2.30.2
next prev parent reply other threads:[~2022-05-13 14:16 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-13 14:15 [PATCH v7 00/28] media: ov5640: Rework the clock tree programming for MIPI Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 01/28] media: ov5640: Add pixel rate to modes Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 02/28] media: ov5640: Re-arrange modes definition Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 03/28] media: ov5640: Add ov5640_is_csi2() function Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 04/28] media: ov5640: Associate bpp with formats Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 05/28] media: ov5640: Add LINK_FREQ control Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 06/28] media: ov5640: Update pixel_rate and link_freq Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 07/28] media: ov5640: Rework CSI-2 clock tree Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 08/28] media: ov5640: Rework timings programming Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 09/28] media: ov5640: Fix 720x480 in RGB888 mode Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 10/28] media: ov5640: Split DVP and CSI-2 timings Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 11/28] media: ov5640: Provide timings accessor Sakari Ailus
2022-05-13 14:15 ` Sakari Ailus [this message]
2022-05-13 14:15 ` [PATCH v7 13/28] media: ov5640: Remove duplicated mode settings Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 14/28] media: ov5640: Remove ov5640_mode_init_data Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 15/28] media: ov5640: Add HBLANK control Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 16/28] media: ov5640: Add VBLANK control Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 17/28] media: ov5640: Adjust vblank with s_frame_interval Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 18/28] media: ov5640: Remove frame rate check from find_mode() Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 19/28] media: ov5640: Change CSI-2 timings to comply with FPS Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 20/28] media: ov5640: Implement init_cfg Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 21/28] media: ov5640: Implement get_selection Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 22/28] media: ov5640: Register device properties Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 23/28] media: ov5640: Add RGB565_1X16 format Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 24/28] media: ov5640: Add BGR888 format Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 25/28] media: ov5640: Restrict sizes to mbus code Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 26/28] media: ov5640: Adjust format to bpp in s_fmt Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 27/28] media: ov5640: Split DVP and CSI-2 formats Sakari Ailus
2022-05-13 14:15 ` [PATCH v7 28/28] media: ov5640: Move format mux config in format Sakari Ailus
2022-05-13 14:24 ` [PATCH v7 00/28] media: ov5640: Rework the clock tree programming for MIPI Jacopo Mondi
-- strict thread matches above, loose matches on Subject: below --
2022-05-13 14:13 Jacopo Mondi
2022-05-13 14:14 ` [PATCH v7 12/28] media: ov5640: Re-sort per-mode register tables Jacopo Mondi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220513141548.6344-13-sakari.ailus@linux.intel.com \
--to=sakari.ailus@linux.intel.com \
--cc=Eugen.Hristev@microchip.com \
--cc=aford173@gmail.com \
--cc=eddy.khan@vergesense.com \
--cc=festevam@gmail.com \
--cc=hugues.fruchet@st.com \
--cc=hverkuil-cisco@xs4all.nl \
--cc=jacopo@jmondi.org \
--cc=jbrunet@baylibre.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=mirela.rabulea@nxp.com \
--cc=paul.elder@ideasonboard.com \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=slongerbeam@gmail.com \
--cc=tomi.valkeinen@ideasonboard.com \
--cc=xavier.roumegue@oss.nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.