From: Eddie James <eajames@linux.ibm.com>
To: openbmc@lists.ozlabs.org
Cc: cjengel@us.ibm.com, joel@jms.id.au
Subject: [PATCH u-boot v2019.04-aspeed-openbmc v2 0/9] ast2600: Add I2C TPMv2 driver
Date: Fri, 13 May 2022 12:07:06 -0500 [thread overview]
Message-ID: <20220513170715.43475-1-eajames@linux.ibm.com> (raw)
This series backports the addition of a TPM TIS core driver from
mainline u-boot. Then, add an I2C driver to talk to the NPCT75X
chip using the TPM TIS core.
Add the TPM to the Rainier/Everest devicetree.
Also, add new board code for IBM's systems that need to "poison"
the TPM during u-boot initialization.
I tested this on Everest hardware and verified in Linux that the TPM PCR0
was extended. I also tested with the TPM at the wrong bus address to
verify that the code can handle a missing TPM, and I saw no errors.
Changes since v1:
- Use upstream core for I2C tpm driver. I initially couldn't get the
core driver to work at all, but found a small bug in the ordering
of operations in the core init. I also needed to force the locality
to 0, like in the Linux NPCT75X driver.
- Use new board init code for IBM's systems that need the TPM poisoning
Eddie James (5):
tpm: core: Set timeouts before requesting locality
i2c: ast_i2c: Remove SCL direct drive mode
tpm: add support for TPMv2.x I2C chips
arm: dts: ast2600-rainier: Add NPCT75X TPM
board: ast2600-ibm: Add AST2600 BMC based POWER10+ servers
Heinrich Schuchardt (1):
tis: fix tpm_tis_remove()
Ilias Apalodimas (1):
tpm2: Introduce TIS tpm core
Johannes Holland (1):
tpm: add #ifndef to fix redeclaration build errors
Simon Glass (1):
tpm: Add more TPM2 definitions
arch/arm/dts/ast2600-rainier.dts | 12 +-
arch/arm/mach-aspeed/ast2600/Kconfig | 7 +
board/aspeed/ast2600_ibm/Kconfig | 13 +
board/aspeed/ast2600_ibm/Makefile | 1 +
board/aspeed/ast2600_ibm/ibm.c | 46 +++
configs/ast2600_ibm_defconfig | 137 ++++++++
drivers/i2c/ast_i2c.c | 2 +-
drivers/tpm/Kconfig | 9 +
drivers/tpm/Makefile | 1 +
drivers/tpm/tpm2_tis_core.c | 470 +++++++++++++++++++++++++++
drivers/tpm/tpm2_tis_i2c.c | 171 ++++++++++
drivers/tpm/tpm_tis.h | 138 ++++++++
include/tpm-v2.h | 32 ++
13 files changed, 1033 insertions(+), 6 deletions(-)
create mode 100644 board/aspeed/ast2600_ibm/Kconfig
create mode 100644 board/aspeed/ast2600_ibm/Makefile
create mode 100644 board/aspeed/ast2600_ibm/ibm.c
create mode 100644 configs/ast2600_ibm_defconfig
create mode 100644 drivers/tpm/tpm2_tis_core.c
create mode 100644 drivers/tpm/tpm2_tis_i2c.c
--
2.27.0
next reply other threads:[~2022-05-13 17:08 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-13 17:07 Eddie James [this message]
2022-05-13 17:07 ` [PATCH u-boot v2019.04-aspeed-openbmc v2 1/9] tpm: Add more TPM2 definitions Eddie James
2022-05-13 17:07 ` [PATCH u-boot v2019.04-aspeed-openbmc v2 2/9] tpm: add #ifndef to fix redeclaration build errors Eddie James
2022-05-13 17:07 ` [PATCH u-boot v2019.04-aspeed-openbmc v2 3/9] tpm2: Introduce TIS tpm core Eddie James
2022-05-13 17:07 ` [PATCH u-boot v2019.04-aspeed-openbmc v2 4/9] tis: fix tpm_tis_remove() Eddie James
2022-05-13 17:07 ` [PATCH u-boot v2019.04-aspeed-openbmc v2 5/9] tpm: core: Set timeouts before requesting locality Eddie James
2022-05-13 17:07 ` [PATCH u-boot v2019.04-aspeed-openbmc v2 6/9] i2c: ast_i2c: Remove SCL direct drive mode Eddie James
2022-05-13 17:07 ` [PATCH u-boot v2019.04-aspeed-openbmc v2 7/9] tpm: add support for TPMv2.x I2C chips Eddie James
2022-05-13 17:07 ` [PATCH u-boot v2019.04-aspeed-openbmc v2 8/9] arm: dts: ast2600-rainier: Add NPCT75X TPM Eddie James
2022-05-13 17:07 ` [PATCH u-boot v2019.04-aspeed-openbmc v2 9/9] board: ast2600-ibm: Add AST2600 BMC based POWER10+ servers Eddie James
2022-05-20 6:30 ` Joel Stanley
2022-05-24 16:42 ` Eddie James
2022-05-20 6:31 ` [PATCH u-boot v2019.04-aspeed-openbmc v2 0/9] ast2600: Add I2C TPMv2 driver Joel Stanley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220513170715.43475-1-eajames@linux.ibm.com \
--to=eajames@linux.ibm.com \
--cc=cjengel@us.ibm.com \
--cc=joel@jms.id.au \
--cc=openbmc@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.