From: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
To: Eddie James <eajames@linux.ibm.com>
Cc: <linux-iio@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>,
<krzysztof.kozlowski+dt@linaro.org>, <robh+dt@kernel.org>,
<lars@metafoo.de>, <jic23@kernel.org>, <miltonm@us.ibm.com>,
David Barksdale <dbarksdale@uplogix.com>
Subject: Re: [PATCH v2 1/2] dt-bindings: iio: humidity: Add si7020 bindings
Date: Fri, 13 May 2022 17:47:00 +0100 [thread overview]
Message-ID: <20220513174700.00005ef4@Huawei.com> (raw)
In-Reply-To: <306c28b7-7318-9b8d-f512-d6e78bd05e51@linux.ibm.com>
On Thu, 12 May 2022 12:08:57 -0500
Eddie James <eajames@linux.ibm.com> wrote:
> On 5/12/22 11:51, Jonathan Cameron wrote:
> > On Thu, 12 May 2022 11:20:19 -0500
> > Eddie James <eajames@linux.ibm.com> wrote:
> >
> >> Document the si7020 bindings with a new "silabs,skip-reset" property.
> >>
> >> Signed-off-by: Eddie James <eajames@linux.ibm.com>
> >> ---
> >> .../bindings/iio/humidity/silabs,si7020.yaml | 47 +++++++++++++++++++
> >> .../devicetree/bindings/trivial-devices.yaml | 2 -
> >> 2 files changed, 47 insertions(+), 2 deletions(-)
> >> create mode 100644 Documentation/devicetree/bindings/iio/humidity/silabs,si7020.yaml
> >>
> >> diff --git a/Documentation/devicetree/bindings/iio/humidity/silabs,si7020.yaml b/Documentation/devicetree/bindings/iio/humidity/silabs,si7020.yaml
> >> new file mode 100644
> >> index 000000000000..9bee010f8d56
> >> --- /dev/null
> >> +++ b/Documentation/devicetree/bindings/iio/humidity/silabs,si7020.yaml
> >> @@ -0,0 +1,47 @@
> >> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> >> +%YAML 1.2
> >> +---
> >> +$id: http://devicetree.org/schemas/iio/humidity/silabs,si7020.yaml#
> >> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> >> +
> >> +title: SI7020 humidity + temperature sensor
> >> +
> >> +maintainers:
> >> + - David Barksdale <dbarksdale@uplogix.com>
> > At least cc David if you are going to commit him to maintaining this binding :)
> > +CC David at that address.
>
>
> Yes, my mail to him for v1 was undeliverable... I guess I should put
> myself instead.
>
That's the best answer :)
(backup is to rely on the fallback which is me but I'd definitely rather bindings
had attentive maintainers where possible!).
>
> >
> >> +
> >> +description: |
> >> + The Silicon Labs Si7013/20/21 Relative Humidity and Temperature Sensors
> >> + are i2c devices which have an identical programming interface for
> >> + measuring relative humidity and temperature.
> >> +
> >> +properties:
> >> + compatible:
> >> + const: silabs,si7020
> >> +
> >> + reg:
> >> + maxItems: 1
> >> +
> >> + siliabs,skip-reset:
> >> + $ref: /schemas/types.yaml#/definitions/flag
> >> + description:
> >> + Disables resetting of the device during probe
> >> +
> >> +required:
> >> + - compatible
> >> + - reg
> >> +
> >> +additionalProperties: false
> >> +
> >> +examples:
> >> + - |
> >> + i2c0 {
> >> + #address-cells = <1>;
> >> + #size-cells = <0>;
> >> +
> >> + si7021-a20@40 {
> >> + silabs,skip-reset;
> >> + compatible = "silabs,si7020";
> >> + reg = <0x40>;
> >> + };
> >> + };
> >> +...
> >> diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml
> >> index e5295faef52f..47a00b478867 100644
> >> --- a/Documentation/devicetree/bindings/trivial-devices.yaml
> >> +++ b/Documentation/devicetree/bindings/trivial-devices.yaml
> >> @@ -317,8 +317,6 @@ properties:
> >> - sensortek,stk8ba50
> >> # SGX Sensortech VZ89X Sensors
> >> - sgx,vz89x
> >> - # Relative Humidity and Temperature Sensors
> >> - - silabs,si7020
> >> # Skyworks SKY81452: Six-Channel White LED Driver with Touch Panel Bias Supply
> >> - skyworks,sky81452
> >> # Socionext SynQuacer TPM MMIO module
next prev parent reply other threads:[~2022-05-13 16:47 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-12 16:20 [PATCH v2 0/2] iio: humidity: si7020: Check device property for skipping reset in probe Eddie James
2022-05-12 16:20 ` [PATCH v2 1/2] dt-bindings: iio: humidity: Add si7020 bindings Eddie James
2022-05-12 16:51 ` Jonathan Cameron
2022-05-12 17:08 ` Eddie James
2022-05-13 16:47 ` Jonathan Cameron [this message]
2022-05-13 8:55 ` Krzysztof Kozlowski
2022-05-12 16:20 ` [PATCH v2 2/2] iio: humidity: si7020: Check device property for skipping reset in probe Eddie James
2022-05-12 16:48 ` [PATCH v2 0/2] " Jonathan Cameron
2022-05-12 17:08 ` Eddie James
2022-05-13 16:45 ` Jonathan Cameron
2022-05-13 22:48 ` Peter Rosin
2022-05-14 13:43 ` Jonathan Cameron
2022-05-14 15:02 ` Peter Rosin
2022-05-18 15:28 ` Eddie James
2022-05-18 15:51 ` Eddie James
2022-05-12 19:11 ` Eddie James
2022-05-14 13:40 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220513174700.00005ef4@Huawei.com \
--to=jonathan.cameron@huawei.com \
--cc=dbarksdale@uplogix.com \
--cc=devicetree@vger.kernel.org \
--cc=eajames@linux.ibm.com \
--cc=jic23@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=miltonm@us.ibm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.