[PATCH] USB: serial: pl2303: fix type detection for odd device

[PATCH] USB: serial: pl2303: fix type detection for odd device

[Johan Hovold]

At least one pl2303 device has a bcdUSB of 1.0.1 which most likely was
was intended as 1.1.

Allow bcdDevice 1.0.1 but interpret it as 1.1.

Fixes: 1e9faef4d26d ("USB: serial: pl2303: fix HX type detection")
Cc: stable@vger.kernel.org      # 5.13
Signed-off-by: Johan Hovold <johan@kernel.org>
---

Bus 001 Device 004: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.01
  bDeviceClass            0 
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  idVendor           0x067b Prolific Technology, Inc.
  idProduct          0x2303 PL2303 Serial Port
  bcdDevice            3.00
  iManufacturer           1 Prolific Technology Inc.
  iProduct                2 USB-Serial Controller
  iSerial                 0 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength       0x0027
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xa0
      (Bus Powered)
      Remote Wakeup
    MaxPower              100mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           3
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      0 
      bInterfaceProtocol      0 
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0020  1x 32 bytes
        bInterval               1
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0020  1x 32 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0020  1x 32 bytes
        bInterval               0
Device Status:     0x0000
  (Bus Powered)

 drivers/usb/serial/pl2303.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 1d878d05a658..3506c47e1eef 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -421,6 +421,9 @@ static int pl2303_detect_type(struct usb_serial *serial)
 	bcdUSB = le16_to_cpu(desc->bcdUSB);
 
 	switch (bcdUSB) {
+	case 0x101:
+		/* USB 1.0.1? Let's assume they meant 1.1... */
+		fallthrough;
 	case 0x110:
 		switch (bcdDevice) {
 		case 0x300:
-- 
2.35.1