From: Arnd Bergmann <arnd-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: linux-arch-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-scsi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>,
linux-m68k-cunTk1MwBs8S/qaLPR03pWD2FQJk+8+b@public.gmane.org,
Greg Kroah-Hartman
<gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org>,
Martyn Welch <martyn-UcCTFicEjwugMbh0pXVFDA@public.gmane.org>,
Manohar Vanga
<manohar.vanga-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
linuxppc-dev-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
Denis Efremov <efremov-vYTEC60ixJUAvxtiuMwx3w@public.gmane.org>,
Christoph Hellwig <hch-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org>,
iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org,
linux-parisc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-alpha-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Jakub Kicinski <kuba-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Khalid Aziz <khalid-21RPF02GE+GXwddmVfQv5g@public.gmane.org>,
Robin Murphy <robin.murphy-5wv7dgnIgG8@public.gmane.org>
Subject: [PATCH 0/6] phase out CONFIG_VIRT_TO_BUS
Date: Mon, 6 Jun 2022 10:41:03 +0200 [thread overview]
Message-ID: <20220606084109.4108188-1-arnd@kernel.org> (raw)
From: Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>
The virt_to_bus/bus_to_virt interface has been deprecated for
decades. After Jakub Kicinski put a lot of work into cleaning out the
network drivers using them, there are only a couple of other drivers
left, which can all be removed or otherwise cleaned up, to remove the
old interface for good.
Any out of tree drivers using virt_to_bus() should be converted to
using the dma-mapping interfaces, typically dma_alloc_coherent()
or dma_map_single()).
There are a few m68k and ppc32 specific drivers that keep using the
interfaces, but these are all guarded with architecture-specific
Kconfig dependencies, and are not actually broken.
There are still a number of drivers that are using virt_to_phys()
and phys_to_virt() in place of dma-mapping operations, and these
are often broken, but they are out of scope for this series.
Arnd
Cc: Jakub Kicinski <kuba-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: Christoph Hellwig <hch-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org> # dma-mapping
Cc: Marek Szyprowski <m.szyprowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org> # dma-mapping
Cc: Robin Murphy <robin.murphy-5wv7dgnIgG8@public.gmane.org> # dma-mapping
Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org
Cc: Khalid Aziz <khalid-21RPF02GE+GXwddmVfQv5g@public.gmane.org> # buslogic
Cc: linux-scsi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Manohar Vanga <manohar.vanga-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> # vme
Cc: Martyn Welch <martyn-UcCTFicEjwugMbh0pXVFDA@public.gmane.org> # vme
Cc: Greg Kroah-Hartman <gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org> # vme
Cc: linuxppc-dev-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org
Cc: linux-arch-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: linux-alpha-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: linux-m68k-cunTk1MwBs8S/qaLPR03pWD2FQJk+8+b@public.gmane.org
Cc: linux-parisc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Denis Efremov <efremov-vYTEC60ixJUAvxtiuMwx3w@public.gmane.org> # floppy
Arnd Bergmann (6):
vme: remove ca91cx42 Universe-II support
vme: move back to staging
media: sta2x11: remove VIRT_TO_BUS dependency
scsi: dpt_i2o: drop stale VIRT_TO_BUS dependency
scsi: remove stale BusLogic driver
arch/*/: remove CONFIG_VIRT_TO_BUS
.../core-api/bus-virt-phys-mapping.rst | 220 -
Documentation/core-api/dma-api-howto.rst | 14 -
Documentation/core-api/index.rst | 1 -
Documentation/driver-api/vme.rst | 4 +-
Documentation/scsi/BusLogic.rst | 581 --
Documentation/scsi/FlashPoint.rst | 176 -
.../translations/zh_CN/core-api/index.rst | 1 -
MAINTAINERS | 11 +-
arch/alpha/Kconfig | 1 -
arch/alpha/include/asm/floppy.h | 2 +-
arch/alpha/include/asm/io.h | 8 +-
arch/ia64/Kconfig | 1 -
arch/ia64/include/asm/io.h | 8 -
arch/m68k/Kconfig | 1 -
arch/m68k/include/asm/virtconvert.h | 4 +-
arch/microblaze/Kconfig | 1 -
arch/microblaze/include/asm/io.h | 2 -
arch/mips/Kconfig | 1 -
arch/mips/include/asm/io.h | 9 -
arch/parisc/Kconfig | 1 -
arch/parisc/include/asm/floppy.h | 4 +-
arch/parisc/include/asm/io.h | 2 -
arch/powerpc/Kconfig | 1 -
arch/powerpc/include/asm/io.h | 2 -
arch/riscv/include/asm/page.h | 1 -
arch/x86/Kconfig | 1 -
arch/x86/include/asm/io.h | 9 -
arch/xtensa/Kconfig | 1 -
arch/xtensa/include/asm/io.h | 3 -
drivers/Kconfig | 2 -
drivers/Makefile | 1 -
drivers/media/pci/sta2x11/Kconfig | 2 +-
drivers/scsi/BusLogic.c | 3727 --------
drivers/scsi/BusLogic.h | 1284 ---
drivers/scsi/FlashPoint.c | 7560 -----------------
drivers/scsi/Kconfig | 26 +-
drivers/scsi/dpt_i2o.c | 4 +-
drivers/staging/vme_user/Kconfig | 27 +
drivers/staging/vme_user/Makefile | 3 +
drivers/{vme => staging/vme_user}/vme.c | 2 +-
.../linux => drivers/staging/vme_user}/vme.h | 0
.../{vme => staging/vme_user}/vme_bridge.h | 2 +-
.../bridges => staging/vme_user}/vme_fake.c | 4 +-
.../bridges => staging/vme_user}/vme_tsi148.c | 4 +-
.../bridges => staging/vme_user}/vme_tsi148.h | 0
drivers/staging/vme_user/vme_user.c | 2 +-
drivers/vme/Kconfig | 18 -
drivers/vme/Makefile | 8 -
drivers/vme/boards/Kconfig | 10 -
drivers/vme/boards/Makefile | 6 -
drivers/vme/boards/vme_vmivme7805.c | 106 -
drivers/vme/boards/vme_vmivme7805.h | 33 -
drivers/vme/bridges/Kconfig | 24 -
drivers/vme/bridges/Makefile | 4 -
drivers/vme/bridges/vme_ca91cx42.c | 1928 -----
drivers/vme/bridges/vme_ca91cx42.h | 579 --
include/asm-generic/io.h | 14 -
mm/Kconfig | 8 -
58 files changed, 54 insertions(+), 16405 deletions(-)
delete mode 100644 Documentation/core-api/bus-virt-phys-mapping.rst
delete mode 100644 Documentation/scsi/BusLogic.rst
delete mode 100644 Documentation/scsi/FlashPoint.rst
delete mode 100644 drivers/scsi/BusLogic.c
delete mode 100644 drivers/scsi/BusLogic.h
delete mode 100644 drivers/scsi/FlashPoint.c
rename drivers/{vme => staging/vme_user}/vme.c (99%)
rename {include/linux => drivers/staging/vme_user}/vme.h (100%)
rename drivers/{vme => staging/vme_user}/vme_bridge.h (99%)
rename drivers/{vme/bridges => staging/vme_user}/vme_fake.c (99%)
rename drivers/{vme/bridges => staging/vme_user}/vme_tsi148.c (99%)
rename drivers/{vme/bridges => staging/vme_user}/vme_tsi148.h (100%)
delete mode 100644 drivers/vme/Kconfig
delete mode 100644 drivers/vme/Makefile
delete mode 100644 drivers/vme/boards/Kconfig
delete mode 100644 drivers/vme/boards/Makefile
delete mode 100644 drivers/vme/boards/vme_vmivme7805.c
delete mode 100644 drivers/vme/boards/vme_vmivme7805.h
delete mode 100644 drivers/vme/bridges/Kconfig
delete mode 100644 drivers/vme/bridges/Makefile
delete mode 100644 drivers/vme/bridges/vme_ca91cx42.c
delete mode 100644 drivers/vme/bridges/vme_ca91cx42.h
--
2.29.2
WARNING: multiple messages have this Message-ID (diff)
From: Arnd Bergmann <arnd@kernel.org>
To: unlisted-recipients:; (no To-header on input)
Cc: Arnd Bergmann <arnd@arndb.de>, Jakub Kicinski <kuba@kernel.org>,
Christoph Hellwig <hch@infradead.org>,
Marek Szyprowski <m.szyprowski@samsung.com>,
Robin Murphy <robin.murphy@arm.com>,
iommu@lists.linux-foundation.org,
Khalid Aziz <khalid@gonehiking.org>,
linux-scsi@vger.kernel.org,
Manohar Vanga <manohar.vanga@gmail.com>,
Martyn Welch <martyn@welchs.me.uk>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linuxppc-dev@lists.ozlabs.org, linux-arch@vger.kernel.org,
linux-alpha@vger.kernel.org, linux-m68k@lists.linux-m68k.org,
linux-parisc@vger.kernel.org, Denis Efremov <efremov@linux.com>
Subject: [PATCH 0/6] phase out CONFIG_VIRT_TO_BUS
Date: Mon, 6 Jun 2022 10:41:03 +0200 [thread overview]
Message-ID: <20220606084109.4108188-1-arnd@kernel.org> (raw)
From: Arnd Bergmann <arnd@arndb.de>
The virt_to_bus/bus_to_virt interface has been deprecated for
decades. After Jakub Kicinski put a lot of work into cleaning out the
network drivers using them, there are only a couple of other drivers
left, which can all be removed or otherwise cleaned up, to remove the
old interface for good.
Any out of tree drivers using virt_to_bus() should be converted to
using the dma-mapping interfaces, typically dma_alloc_coherent()
or dma_map_single()).
There are a few m68k and ppc32 specific drivers that keep using the
interfaces, but these are all guarded with architecture-specific
Kconfig dependencies, and are not actually broken.
There are still a number of drivers that are using virt_to_phys()
and phys_to_virt() in place of dma-mapping operations, and these
are often broken, but they are out of scope for this series.
Arnd
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org> # dma-mapping
Cc: Marek Szyprowski <m.szyprowski@samsung.com> # dma-mapping
Cc: Robin Murphy <robin.murphy@arm.com> # dma-mapping
Cc: iommu@lists.linux-foundation.org
Cc: Khalid Aziz <khalid@gonehiking.org> # buslogic
Cc: linux-scsi@vger.kernel.org
Cc: Manohar Vanga <manohar.vanga@gmail.com> # vme
Cc: Martyn Welch <martyn@welchs.me.uk> # vme
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> # vme
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-arch@vger.kernel.org
Cc: linux-alpha@vger.kernel.org
Cc: linux-m68k@lists.linux-m68k.org
Cc: linux-parisc@vger.kernel.org
Cc: Denis Efremov <efremov@linux.com> # floppy
Arnd Bergmann (6):
vme: remove ca91cx42 Universe-II support
vme: move back to staging
media: sta2x11: remove VIRT_TO_BUS dependency
scsi: dpt_i2o: drop stale VIRT_TO_BUS dependency
scsi: remove stale BusLogic driver
arch/*/: remove CONFIG_VIRT_TO_BUS
.../core-api/bus-virt-phys-mapping.rst | 220 -
Documentation/core-api/dma-api-howto.rst | 14 -
Documentation/core-api/index.rst | 1 -
Documentation/driver-api/vme.rst | 4 +-
Documentation/scsi/BusLogic.rst | 581 --
Documentation/scsi/FlashPoint.rst | 176 -
.../translations/zh_CN/core-api/index.rst | 1 -
MAINTAINERS | 11 +-
arch/alpha/Kconfig | 1 -
arch/alpha/include/asm/floppy.h | 2 +-
arch/alpha/include/asm/io.h | 8 +-
arch/ia64/Kconfig | 1 -
arch/ia64/include/asm/io.h | 8 -
arch/m68k/Kconfig | 1 -
arch/m68k/include/asm/virtconvert.h | 4 +-
arch/microblaze/Kconfig | 1 -
arch/microblaze/include/asm/io.h | 2 -
arch/mips/Kconfig | 1 -
arch/mips/include/asm/io.h | 9 -
arch/parisc/Kconfig | 1 -
arch/parisc/include/asm/floppy.h | 4 +-
arch/parisc/include/asm/io.h | 2 -
arch/powerpc/Kconfig | 1 -
arch/powerpc/include/asm/io.h | 2 -
arch/riscv/include/asm/page.h | 1 -
arch/x86/Kconfig | 1 -
arch/x86/include/asm/io.h | 9 -
arch/xtensa/Kconfig | 1 -
arch/xtensa/include/asm/io.h | 3 -
drivers/Kconfig | 2 -
drivers/Makefile | 1 -
drivers/media/pci/sta2x11/Kconfig | 2 +-
drivers/scsi/BusLogic.c | 3727 --------
drivers/scsi/BusLogic.h | 1284 ---
drivers/scsi/FlashPoint.c | 7560 -----------------
drivers/scsi/Kconfig | 26 +-
drivers/scsi/dpt_i2o.c | 4 +-
drivers/staging/vme_user/Kconfig | 27 +
drivers/staging/vme_user/Makefile | 3 +
drivers/{vme => staging/vme_user}/vme.c | 2 +-
.../linux => drivers/staging/vme_user}/vme.h | 0
.../{vme => staging/vme_user}/vme_bridge.h | 2 +-
.../bridges => staging/vme_user}/vme_fake.c | 4 +-
.../bridges => staging/vme_user}/vme_tsi148.c | 4 +-
.../bridges => staging/vme_user}/vme_tsi148.h | 0
drivers/staging/vme_user/vme_user.c | 2 +-
drivers/vme/Kconfig | 18 -
drivers/vme/Makefile | 8 -
drivers/vme/boards/Kconfig | 10 -
drivers/vme/boards/Makefile | 6 -
drivers/vme/boards/vme_vmivme7805.c | 106 -
drivers/vme/boards/vme_vmivme7805.h | 33 -
drivers/vme/bridges/Kconfig | 24 -
drivers/vme/bridges/Makefile | 4 -
drivers/vme/bridges/vme_ca91cx42.c | 1928 -----
drivers/vme/bridges/vme_ca91cx42.h | 579 --
include/asm-generic/io.h | 14 -
mm/Kconfig | 8 -
58 files changed, 54 insertions(+), 16405 deletions(-)
delete mode 100644 Documentation/core-api/bus-virt-phys-mapping.rst
delete mode 100644 Documentation/scsi/BusLogic.rst
delete mode 100644 Documentation/scsi/FlashPoint.rst
delete mode 100644 drivers/scsi/BusLogic.c
delete mode 100644 drivers/scsi/BusLogic.h
delete mode 100644 drivers/scsi/FlashPoint.c
rename drivers/{vme => staging/vme_user}/vme.c (99%)
rename {include/linux => drivers/staging/vme_user}/vme.h (100%)
rename drivers/{vme => staging/vme_user}/vme_bridge.h (99%)
rename drivers/{vme/bridges => staging/vme_user}/vme_fake.c (99%)
rename drivers/{vme/bridges => staging/vme_user}/vme_tsi148.c (99%)
rename drivers/{vme/bridges => staging/vme_user}/vme_tsi148.h (100%)
delete mode 100644 drivers/vme/Kconfig
delete mode 100644 drivers/vme/Makefile
delete mode 100644 drivers/vme/boards/Kconfig
delete mode 100644 drivers/vme/boards/Makefile
delete mode 100644 drivers/vme/boards/vme_vmivme7805.c
delete mode 100644 drivers/vme/boards/vme_vmivme7805.h
delete mode 100644 drivers/vme/bridges/Kconfig
delete mode 100644 drivers/vme/bridges/Makefile
delete mode 100644 drivers/vme/bridges/vme_ca91cx42.c
delete mode 100644 drivers/vme/bridges/vme_ca91cx42.h
--
2.29.2
WARNING: multiple messages have this Message-ID (diff)
From: Arnd Bergmann <arnd@kernel.org>
Cc: linux-arch@vger.kernel.org, linux-scsi@vger.kernel.org,
Arnd Bergmann <arnd@arndb.de>,
linux-m68k@lists.linux-m68k.org,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Martyn Welch <martyn@welchs.me.uk>,
Manohar Vanga <manohar.vanga@gmail.com>,
linuxppc-dev@lists.ozlabs.org, Denis Efremov <efremov@linux.com>,
Christoph Hellwig <hch@infradead.org>,
iommu@lists.linux-foundation.org, linux-parisc@vger.kernel.org,
linux-alpha@vger.kernel.org, Jakub Kicinski <kuba@kernel.org>,
Khalid Aziz <khalid@gonehiking.org>,
Robin Murphy <robin.murphy@arm.com>
Subject: [PATCH 0/6] phase out CONFIG_VIRT_TO_BUS
Date: Mon, 6 Jun 2022 10:41:03 +0200 [thread overview]
Message-ID: <20220606084109.4108188-1-arnd@kernel.org> (raw)
From: Arnd Bergmann <arnd@arndb.de>
The virt_to_bus/bus_to_virt interface has been deprecated for
decades. After Jakub Kicinski put a lot of work into cleaning out the
network drivers using them, there are only a couple of other drivers
left, which can all be removed or otherwise cleaned up, to remove the
old interface for good.
Any out of tree drivers using virt_to_bus() should be converted to
using the dma-mapping interfaces, typically dma_alloc_coherent()
or dma_map_single()).
There are a few m68k and ppc32 specific drivers that keep using the
interfaces, but these are all guarded with architecture-specific
Kconfig dependencies, and are not actually broken.
There are still a number of drivers that are using virt_to_phys()
and phys_to_virt() in place of dma-mapping operations, and these
are often broken, but they are out of scope for this series.
Arnd
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org> # dma-mapping
Cc: Marek Szyprowski <m.szyprowski@samsung.com> # dma-mapping
Cc: Robin Murphy <robin.murphy@arm.com> # dma-mapping
Cc: iommu@lists.linux-foundation.org
Cc: Khalid Aziz <khalid@gonehiking.org> # buslogic
Cc: linux-scsi@vger.kernel.org
Cc: Manohar Vanga <manohar.vanga@gmail.com> # vme
Cc: Martyn Welch <martyn@welchs.me.uk> # vme
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> # vme
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-arch@vger.kernel.org
Cc: linux-alpha@vger.kernel.org
Cc: linux-m68k@lists.linux-m68k.org
Cc: linux-parisc@vger.kernel.org
Cc: Denis Efremov <efremov@linux.com> # floppy
Arnd Bergmann (6):
vme: remove ca91cx42 Universe-II support
vme: move back to staging
media: sta2x11: remove VIRT_TO_BUS dependency
scsi: dpt_i2o: drop stale VIRT_TO_BUS dependency
scsi: remove stale BusLogic driver
arch/*/: remove CONFIG_VIRT_TO_BUS
.../core-api/bus-virt-phys-mapping.rst | 220 -
Documentation/core-api/dma-api-howto.rst | 14 -
Documentation/core-api/index.rst | 1 -
Documentation/driver-api/vme.rst | 4 +-
Documentation/scsi/BusLogic.rst | 581 --
Documentation/scsi/FlashPoint.rst | 176 -
.../translations/zh_CN/core-api/index.rst | 1 -
MAINTAINERS | 11 +-
arch/alpha/Kconfig | 1 -
arch/alpha/include/asm/floppy.h | 2 +-
arch/alpha/include/asm/io.h | 8 +-
arch/ia64/Kconfig | 1 -
arch/ia64/include/asm/io.h | 8 -
arch/m68k/Kconfig | 1 -
arch/m68k/include/asm/virtconvert.h | 4 +-
arch/microblaze/Kconfig | 1 -
arch/microblaze/include/asm/io.h | 2 -
arch/mips/Kconfig | 1 -
arch/mips/include/asm/io.h | 9 -
arch/parisc/Kconfig | 1 -
arch/parisc/include/asm/floppy.h | 4 +-
arch/parisc/include/asm/io.h | 2 -
arch/powerpc/Kconfig | 1 -
arch/powerpc/include/asm/io.h | 2 -
arch/riscv/include/asm/page.h | 1 -
arch/x86/Kconfig | 1 -
arch/x86/include/asm/io.h | 9 -
arch/xtensa/Kconfig | 1 -
arch/xtensa/include/asm/io.h | 3 -
drivers/Kconfig | 2 -
drivers/Makefile | 1 -
drivers/media/pci/sta2x11/Kconfig | 2 +-
drivers/scsi/BusLogic.c | 3727 --------
drivers/scsi/BusLogic.h | 1284 ---
drivers/scsi/FlashPoint.c | 7560 -----------------
drivers/scsi/Kconfig | 26 +-
drivers/scsi/dpt_i2o.c | 4 +-
drivers/staging/vme_user/Kconfig | 27 +
drivers/staging/vme_user/Makefile | 3 +
drivers/{vme => staging/vme_user}/vme.c | 2 +-
.../linux => drivers/staging/vme_user}/vme.h | 0
.../{vme => staging/vme_user}/vme_bridge.h | 2 +-
.../bridges => staging/vme_user}/vme_fake.c | 4 +-
.../bridges => staging/vme_user}/vme_tsi148.c | 4 +-
.../bridges => staging/vme_user}/vme_tsi148.h | 0
drivers/staging/vme_user/vme_user.c | 2 +-
drivers/vme/Kconfig | 18 -
drivers/vme/Makefile | 8 -
drivers/vme/boards/Kconfig | 10 -
drivers/vme/boards/Makefile | 6 -
drivers/vme/boards/vme_vmivme7805.c | 106 -
drivers/vme/boards/vme_vmivme7805.h | 33 -
drivers/vme/bridges/Kconfig | 24 -
drivers/vme/bridges/Makefile | 4 -
drivers/vme/bridges/vme_ca91cx42.c | 1928 -----
drivers/vme/bridges/vme_ca91cx42.h | 579 --
include/asm-generic/io.h | 14 -
mm/Kconfig | 8 -
58 files changed, 54 insertions(+), 16405 deletions(-)
delete mode 100644 Documentation/core-api/bus-virt-phys-mapping.rst
delete mode 100644 Documentation/scsi/BusLogic.rst
delete mode 100644 Documentation/scsi/FlashPoint.rst
delete mode 100644 drivers/scsi/BusLogic.c
delete mode 100644 drivers/scsi/BusLogic.h
delete mode 100644 drivers/scsi/FlashPoint.c
rename drivers/{vme => staging/vme_user}/vme.c (99%)
rename {include/linux => drivers/staging/vme_user}/vme.h (100%)
rename drivers/{vme => staging/vme_user}/vme_bridge.h (99%)
rename drivers/{vme/bridges => staging/vme_user}/vme_fake.c (99%)
rename drivers/{vme/bridges => staging/vme_user}/vme_tsi148.c (99%)
rename drivers/{vme/bridges => staging/vme_user}/vme_tsi148.h (100%)
delete mode 100644 drivers/vme/Kconfig
delete mode 100644 drivers/vme/Makefile
delete mode 100644 drivers/vme/boards/Kconfig
delete mode 100644 drivers/vme/boards/Makefile
delete mode 100644 drivers/vme/boards/vme_vmivme7805.c
delete mode 100644 drivers/vme/boards/vme_vmivme7805.h
delete mode 100644 drivers/vme/bridges/Kconfig
delete mode 100644 drivers/vme/bridges/Makefile
delete mode 100644 drivers/vme/bridges/vme_ca91cx42.c
delete mode 100644 drivers/vme/bridges/vme_ca91cx42.h
--
2.29.2
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
WARNING: multiple messages have this Message-ID (diff)
From: Arnd Bergmann <arnd@kernel.org>
Cc: linux-arch@vger.kernel.org, linux-scsi@vger.kernel.org,
Arnd Bergmann <arnd@arndb.de>,
linux-m68k@lists.linux-m68k.org,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Martyn Welch <martyn@welchs.me.uk>,
Manohar Vanga <manohar.vanga@gmail.com>,
linuxppc-dev@lists.ozlabs.org, Denis Efremov <efremov@linux.com>,
Christoph Hellwig <hch@infradead.org>,
iommu@lists.linux-foundation.org, linux-parisc@vger.kernel.org,
linux-alpha@vger.kernel.org, Jakub Kicinski <kuba@kernel.org>,
Khalid Aziz <khalid@gonehiking.org>,
Robin Murphy <robin.murphy@arm.com>,
Marek Szyprowski <m.szyprowski@samsung.com>
Subject: [PATCH 0/6] phase out CONFIG_VIRT_TO_BUS
Date: Mon, 6 Jun 2022 10:41:03 +0200 [thread overview]
Message-ID: <20220606084109.4108188-1-arnd@kernel.org> (raw)
From: Arnd Bergmann <arnd@arndb.de>
The virt_to_bus/bus_to_virt interface has been deprecated for
decades. After Jakub Kicinski put a lot of work into cleaning out the
network drivers using them, there are only a couple of other drivers
left, which can all be removed or otherwise cleaned up, to remove the
old interface for good.
Any out of tree drivers using virt_to_bus() should be converted to
using the dma-mapping interfaces, typically dma_alloc_coherent()
or dma_map_single()).
There are a few m68k and ppc32 specific drivers that keep using the
interfaces, but these are all guarded with architecture-specific
Kconfig dependencies, and are not actually broken.
There are still a number of drivers that are using virt_to_phys()
and phys_to_virt() in place of dma-mapping operations, and these
are often broken, but they are out of scope for this series.
Arnd
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org> # dma-mapping
Cc: Marek Szyprowski <m.szyprowski@samsung.com> # dma-mapping
Cc: Robin Murphy <robin.murphy@arm.com> # dma-mapping
Cc: iommu@lists.linux-foundation.org
Cc: Khalid Aziz <khalid@gonehiking.org> # buslogic
Cc: linux-scsi@vger.kernel.org
Cc: Manohar Vanga <manohar.vanga@gmail.com> # vme
Cc: Martyn Welch <martyn@welchs.me.uk> # vme
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> # vme
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-arch@vger.kernel.org
Cc: linux-alpha@vger.kernel.org
Cc: linux-m68k@lists.linux-m68k.org
Cc: linux-parisc@vger.kernel.org
Cc: Denis Efremov <efremov@linux.com> # floppy
Arnd Bergmann (6):
vme: remove ca91cx42 Universe-II support
vme: move back to staging
media: sta2x11: remove VIRT_TO_BUS dependency
scsi: dpt_i2o: drop stale VIRT_TO_BUS dependency
scsi: remove stale BusLogic driver
arch/*/: remove CONFIG_VIRT_TO_BUS
.../core-api/bus-virt-phys-mapping.rst | 220 -
Documentation/core-api/dma-api-howto.rst | 14 -
Documentation/core-api/index.rst | 1 -
Documentation/driver-api/vme.rst | 4 +-
Documentation/scsi/BusLogic.rst | 581 --
Documentation/scsi/FlashPoint.rst | 176 -
.../translations/zh_CN/core-api/index.rst | 1 -
MAINTAINERS | 11 +-
arch/alpha/Kconfig | 1 -
arch/alpha/include/asm/floppy.h | 2 +-
arch/alpha/include/asm/io.h | 8 +-
arch/ia64/Kconfig | 1 -
arch/ia64/include/asm/io.h | 8 -
arch/m68k/Kconfig | 1 -
arch/m68k/include/asm/virtconvert.h | 4 +-
arch/microblaze/Kconfig | 1 -
arch/microblaze/include/asm/io.h | 2 -
arch/mips/Kconfig | 1 -
arch/mips/include/asm/io.h | 9 -
arch/parisc/Kconfig | 1 -
arch/parisc/include/asm/floppy.h | 4 +-
arch/parisc/include/asm/io.h | 2 -
arch/powerpc/Kconfig | 1 -
arch/powerpc/include/asm/io.h | 2 -
arch/riscv/include/asm/page.h | 1 -
arch/x86/Kconfig | 1 -
arch/x86/include/asm/io.h | 9 -
arch/xtensa/Kconfig | 1 -
arch/xtensa/include/asm/io.h | 3 -
drivers/Kconfig | 2 -
drivers/Makefile | 1 -
drivers/media/pci/sta2x11/Kconfig | 2 +-
drivers/scsi/BusLogic.c | 3727 --------
drivers/scsi/BusLogic.h | 1284 ---
drivers/scsi/FlashPoint.c | 7560 -----------------
drivers/scsi/Kconfig | 26 +-
drivers/scsi/dpt_i2o.c | 4 +-
drivers/staging/vme_user/Kconfig | 27 +
drivers/staging/vme_user/Makefile | 3 +
drivers/{vme => staging/vme_user}/vme.c | 2 +-
.../linux => drivers/staging/vme_user}/vme.h | 0
.../{vme => staging/vme_user}/vme_bridge.h | 2 +-
.../bridges => staging/vme_user}/vme_fake.c | 4 +-
.../bridges => staging/vme_user}/vme_tsi148.c | 4 +-
.../bridges => staging/vme_user}/vme_tsi148.h | 0
drivers/staging/vme_user/vme_user.c | 2 +-
drivers/vme/Kconfig | 18 -
drivers/vme/Makefile | 8 -
drivers/vme/boards/Kconfig | 10 -
drivers/vme/boards/Makefile | 6 -
drivers/vme/boards/vme_vmivme7805.c | 106 -
drivers/vme/boards/vme_vmivme7805.h | 33 -
drivers/vme/bridges/Kconfig | 24 -
drivers/vme/bridges/Makefile | 4 -
drivers/vme/bridges/vme_ca91cx42.c | 1928 -----
drivers/vme/bridges/vme_ca91cx42.h | 579 --
include/asm-generic/io.h | 14 -
mm/Kconfig | 8 -
58 files changed, 54 insertions(+), 16405 deletions(-)
delete mode 100644 Documentation/core-api/bus-virt-phys-mapping.rst
delete mode 100644 Documentation/scsi/BusLogic.rst
delete mode 100644 Documentation/scsi/FlashPoint.rst
delete mode 100644 drivers/scsi/BusLogic.c
delete mode 100644 drivers/scsi/BusLogic.h
delete mode 100644 drivers/scsi/FlashPoint.c
rename drivers/{vme => staging/vme_user}/vme.c (99%)
rename {include/linux => drivers/staging/vme_user}/vme.h (100%)
rename drivers/{vme => staging/vme_user}/vme_bridge.h (99%)
rename drivers/{vme/bridges => staging/vme_user}/vme_fake.c (99%)
rename drivers/{vme/bridges => staging/vme_user}/vme_tsi148.c (99%)
rename drivers/{vme/bridges => staging/vme_user}/vme_tsi148.h (100%)
delete mode 100644 drivers/vme/Kconfig
delete mode 100644 drivers/vme/Makefile
delete mode 100644 drivers/vme/boards/Kconfig
delete mode 100644 drivers/vme/boards/Makefile
delete mode 100644 drivers/vme/boards/vme_vmivme7805.c
delete mode 100644 drivers/vme/boards/vme_vmivme7805.h
delete mode 100644 drivers/vme/bridges/Kconfig
delete mode 100644 drivers/vme/bridges/Makefile
delete mode 100644 drivers/vme/bridges/vme_ca91cx42.c
delete mode 100644 drivers/vme/bridges/vme_ca91cx42.h
--
2.29.2
next reply other threads:[~2022-06-06 8:41 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-06 8:41 Arnd Bergmann [this message]
2022-06-06 8:41 ` [PATCH 0/6] phase out CONFIG_VIRT_TO_BUS Arnd Bergmann
2022-06-06 8:41 ` Arnd Bergmann
2022-06-06 8:41 ` Arnd Bergmann
[not found] ` <20220606084109.4108188-1-arnd-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2022-06-06 8:41 ` [PATCH 1/6] vme: remove ca91cx42 Universe-II support Arnd Bergmann
2022-06-06 8:41 ` Arnd Bergmann
2022-06-06 8:41 ` Arnd Bergmann
2022-06-06 8:41 ` Arnd Bergmann
2022-06-06 8:41 ` [PATCH 2/6] vme: move back to staging Arnd Bergmann
2022-06-06 8:41 ` Arnd Bergmann
2022-06-06 8:41 ` Arnd Bergmann
2022-06-06 8:41 ` Arnd Bergmann
2022-06-06 8:41 ` [PATCH 3/6] media: sta2x11: remove VIRT_TO_BUS dependency Arnd Bergmann
2022-06-06 8:41 ` Arnd Bergmann
2022-06-06 8:41 ` Arnd Bergmann
2022-06-06 8:41 ` Arnd Bergmann
2022-06-06 8:41 ` [PATCH 4/6] scsi: dpt_i2o: drop stale " Arnd Bergmann
2022-06-06 8:41 ` Arnd Bergmann
2022-06-06 8:41 ` Arnd Bergmann
2022-06-06 8:41 ` Arnd Bergmann
2022-06-06 8:41 ` [PATCH 5/6] scsi: remove stale BusLogic driver Arnd Bergmann
2022-06-06 8:41 ` Arnd Bergmann
2022-06-06 8:41 ` Arnd Bergmann
2022-06-06 10:40 ` Maciej W. Rozycki
2022-06-06 10:40 ` Maciej W. Rozycki
2022-06-06 10:40 ` Maciej W. Rozycki
2022-06-06 15:00 ` Arnd Bergmann
2022-06-06 15:00 ` Arnd Bergmann
2022-06-06 15:00 ` Arnd Bergmann
2022-06-06 16:35 ` Khalid Aziz
2022-06-06 16:35 ` Khalid Aziz
2022-06-06 16:35 ` Khalid Aziz
[not found] ` <d39fc9bb-07c1-ad74-1e89-d2aa80578cd4-21RPF02GE+GXwddmVfQv5g@public.gmane.org>
2022-06-08 8:19 ` Arnd Bergmann
2022-06-08 8:19 ` Arnd Bergmann
2022-06-08 8:19 ` Arnd Bergmann
2022-06-08 8:19 ` Arnd Bergmann
2022-06-06 8:41 ` [PATCH 6/6] arch/*/: remove CONFIG_VIRT_TO_BUS Arnd Bergmann
2022-06-06 8:41 ` Arnd Bergmann
2022-06-06 8:41 ` Arnd Bergmann
2022-06-06 8:41 ` Arnd Bergmann
[not found] ` <20220606084109.4108188-7-arnd-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2022-06-07 7:29 ` Geert Uytterhoeven
2022-06-07 7:29 ` Geert Uytterhoeven
2022-06-07 7:29 ` Geert Uytterhoeven
2022-06-07 7:29 ` Geert Uytterhoeven
2022-06-07 12:33 ` Michael Ellerman
2022-06-07 12:33 ` Michael Ellerman
2022-06-07 12:33 ` Michael Ellerman
2022-06-06 9:25 ` [PATCH 0/6] phase out CONFIG_VIRT_TO_BUS Greg Kroah-Hartman
2022-06-06 9:25 ` Greg Kroah-Hartman
2022-06-06 9:25 ` Greg Kroah-Hartman
2022-06-06 9:25 ` Greg Kroah-Hartman
2022-06-06 15:01 ` Arnd Bergmann
2022-06-06 15:01 ` Arnd Bergmann
2022-06-06 15:01 ` Arnd Bergmann
2022-06-07 9:09 ` Martyn Welch
2022-06-07 9:09 ` Martyn Welch
2022-06-07 9:09 ` Martyn Welch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220606084109.4108188-1-arnd@kernel.org \
--to=arnd-dgejt+ai2ygdnm+yrofe0a@public.gmane.org \
--cc=arnd-r2nGTMty4D4@public.gmane.org \
--cc=efremov-vYTEC60ixJUAvxtiuMwx3w@public.gmane.org \
--cc=gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org \
--cc=hch-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org \
--cc=iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org \
--cc=khalid-21RPF02GE+GXwddmVfQv5g@public.gmane.org \
--cc=kuba-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=linux-alpha-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-arch-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-m68k-cunTk1MwBs8S/qaLPR03pWD2FQJk+8+b@public.gmane.org \
--cc=linux-parisc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-scsi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linuxppc-dev-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
--cc=manohar.vanga-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=martyn-UcCTFicEjwugMbh0pXVFDA@public.gmane.org \
--cc=robin.murphy-5wv7dgnIgG8@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.