[PATCH v2 00/20] Introduce Nuvoton Arbel NPCM8XX BMC SoC

[Tomer Maimon <tmaimon77@gmail.com>]

This patchset  adds initial support for the Nuvoton 
Arbel NPCM8XX Board Management controller (BMC) SoC family. 

The Nuvoton Arbel NPCM8XX SoC is a fourth-generation BMC.
The NPCM8XX computing subsystem comprises a quadcore ARM 
Cortex A35 ARM-V8 architecture.

This patchset adds minimal architecture and drivers such as:
Clocksource, Clock, Reset, and WD.

Some of the Arbel NPCM8XX peripherals are based on Poleg NPCM7XX.

This patchset was tested on the Arbel NPCM8XX evaluation board.

Addressed comments from:
 - Arnd Bergmann : https://www.spinics.net/lists/arm-kernel/msg982728.html
		   https://www.spinics.net/lists/linux-serial/msg48179.html
 - Stephen Boyd: https://www.spinics.net/lists/arm-kernel/msg983594.html
 - Krzysztof Kozlowski: https://www.spinics.net/lists/kernel/msg4368955.html
			https://www.spinics.net/lists/arm-kernel/msg982427.html
			https://lore.kernel.org/all/973d75b8-0eb6-ff5b-6cd2-9b7d7c5cbcaa@linaro.org/
			https://www.spinics.net/lists/arm-kernel/msg982778.html
			https://www.spinics.net/lists/arm-kernel/msg982588.html
 - Ilpo Järvinen: https://www.spinics.net/lists/kernel/msg4368936.html
 - Stephen Boyd: https://www.spinics.net/lists/arm-kernel/msg983596.html
 - Geert Uytterhoeven : https://www.spinics.net/lists/kernel/msg4369514.html

Changes since version 1:
 - NPCM8XX clock driver
	- Modify dt-binding.
	- Remove unsed definition and include.
	- Include alphabetically.
	- Use clock devm.
 - NPCM reset driver
	- Modify dt-binding.
	- Modify syscon name.
	- Add syscon support to NPCM7XX dts reset node.
	- use data structure.
 - NPCM8XX device tree:
	- Modify evb compatible name.
	- Add NPCM7xx compatible.
	- Remove disable nodes from the EVB DTS.

Tomer Maimon (20):
  clocksource: timer-npcm7xx: Add NPCM845 timer
  dt-bindings: serial: 8250: Add npcm845 compatible string
  tty: serial: 8250: Add NPCM845 UART support
  dt-bindings: watchdog: npcm: Add npcm845 compatible string
  watchdog: npcm_wdt: Add NPCM845 watchdog support
  dt-binding: clk: npcm845: Add binding for Nuvoton NPCM8XX Clock
  clk: npcm8xx: add clock controller
  dt-bindings: reset: modify to general NPCM name
  dt-bindings: reset: npcm: add GCR syscon property
  ARM: dts: nuvoton: add reset syscon property
  reset: npcm: using syscon instead of device data
  dt-bindings: reset: npcm: Add support for NPCM8XX
  reset: npcm: Add NPCM8XX support
  dt-bindings: arm: npcm: Add maintainer
  dt-bindings: arm: npcm: Add nuvoton,npcm845 compatible string
  dt-bindings: arm: npcm: Add nuvoton,npcm845 GCR compatible string
  arm64: npcm: Add support for Nuvoton NPCM8XX BMC SoC
  arm64: dts: nuvoton: Add initial NPCM8XX device tree
  arm64: dts: nuvoton: Add initial NPCM845 EVB device tree
  arm64: defconfig: Add Nuvoton NPCM family support

 .../devicetree/bindings/arm/npcm/npcm.yaml    |   7 +
 .../bindings/arm/npcm/nuvoton,gcr.yaml        |   2 +
 .../bindings/clock/nuvoton,npcm845-clk.yaml   |  63 ++
 ...750-reset.yaml => nuvoton,npcm-reset.yaml} |  21 +-
 .../devicetree/bindings/serial/8250.yaml      |   1 +
 .../bindings/watchdog/nuvoton,npcm-wdt.txt    |   3 +-
 MAINTAINERS                                   |   3 +
 arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi |   1 +
 arch/arm64/Kconfig.platforms                  |  11 +
 arch/arm64/boot/dts/Makefile                  |   1 +
 arch/arm64/boot/dts/nuvoton/Makefile          |   2 +
 .../dts/nuvoton/nuvoton-common-npcm8xx.dtsi   | 197 +++++
 .../boot/dts/nuvoton/nuvoton-npcm845-evb.dts  |  30 +
 .../boot/dts/nuvoton/nuvoton-npcm845.dtsi     |  76 ++
 arch/arm64/configs/defconfig                  |   3 +
 drivers/clk/Kconfig                           |   6 +
 drivers/clk/Makefile                          |   1 +
 drivers/clk/clk-npcm8xx.c                     | 756 ++++++++++++++++++
 drivers/clocksource/timer-npcm7xx.c           |   1 +
 drivers/reset/reset-npcm.c                    | 202 ++++-
 drivers/tty/serial/8250/8250_of.c             |   1 +
 drivers/watchdog/npcm_wdt.c                   |   1 +
 .../dt-bindings/clock/nuvoton,npcm8xx-clock.h |  50 ++
 .../dt-bindings/reset/nuvoton,npcm8xx-reset.h | 128 +++
 24 files changed, 1530 insertions(+), 37 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/nuvoton,npcm845-clk.yaml
 rename Documentation/devicetree/bindings/reset/{nuvoton,npcm750-reset.yaml => nuvoton,npcm-reset.yaml} (58%)
 create mode 100644 arch/arm64/boot/dts/nuvoton/Makefile
 create mode 100644 arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi
 create mode 100644 arch/arm64/boot/dts/nuvoton/nuvoton-npcm845-evb.dts
 create mode 100644 arch/arm64/boot/dts/nuvoton/nuvoton-npcm845.dtsi
 create mode 100644 drivers/clk/clk-npcm8xx.c
 create mode 100644 include/dt-bindings/clock/nuvoton,npcm8xx-clock.h
 create mode 100644 include/dt-bindings/reset/nuvoton,npcm8xx-reset.h

-- 
2.33.0