Re: [PATCH 03/14] ASoC: dt-bindings: convert designware-i2s to dt-schema

[Rob Herring <robh@kernel.org>]

On Sat, Jun 18, 2022 at 01:30:25PM +0100, Conor Dooley wrote:
> From: Conor Dooley <conor.dooley@microchip.com>
> 
> Convert the Synopsys DesignWare I2S controller binding to dt-schema.
> There was no listed maintainer but Jose Abreu was the last editor of the
> txt binding so add him as maintainer.
> 
> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
> ---
>  .../bindings/sound/designware-i2s.txt         | 35 -------
>  .../bindings/sound/snps,designware-i2s.yaml   | 93 +++++++++++++++++++
>  2 files changed, 93 insertions(+), 35 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/sound/designware-i2s.txt
>  create mode 100644 Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml
> 
> diff --git a/Documentation/devicetree/bindings/sound/designware-i2s.txt b/Documentation/devicetree/bindings/sound/designware-i2s.txt
> deleted file mode 100644
> index 6a536d570e29..000000000000
> --- a/Documentation/devicetree/bindings/sound/designware-i2s.txt
> +++ /dev/null
> @@ -1,35 +0,0 @@
> -DesignWare I2S controller
> -
> -Required properties:
> - - compatible : Must be "snps,designware-i2s"
> - - reg : Must contain the I2S core's registers location and length
> - - clocks : Pairs of phandle and specifier referencing the controller's
> -   clocks. The controller expects one clock: the clock used as the sampling
> -   rate reference clock sample.
> - - clock-names : "i2sclk" for the sample rate reference clock.
> - - dmas: Pairs of phandle and specifier for the DMA channels that are used by
> -   the core. The core expects one or two dma channels: one for transmit and
> -   one for receive.
> - - dma-names : "tx" for the transmit channel, "rx" for the receive channel.
> -
> -Optional properties:
> - - interrupts: The interrupt line number for the I2S controller. Add this
> -   parameter if the I2S controller that you are using does not support DMA.
> -
> -For more details on the 'dma', 'dma-names', 'clock' and 'clock-names'
> -properties please check:
> -	* resource-names.txt
> -	* clock/clock-bindings.txt
> -	* dma/dma.txt
> -
> -Example:
> -
> -	soc_i2s: i2s@7ff90000 {
> -		compatible = "snps,designware-i2s";
> -		reg = <0x0 0x7ff90000 0x0 0x1000>;
> -		clocks = <&scpi_i2sclk 0>;
> -		clock-names = "i2sclk";
> -		#sound-dai-cells = <0>;
> -		dmas = <&dma0 5>;
> -		dma-names = "tx";
> -	};
> diff --git a/Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml b/Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml
> new file mode 100644
> index 000000000000..5ac9c00157bf
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml
> @@ -0,0 +1,93 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/snps,designware-i2s.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: DesignWare I2S controller
> +
> +maintainers:
> +  - Jose Abreu <joabreu@synopsys.com>
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - items:
> +          - const: canaan,k210-i2s
> +          - const: snps,designware-i2s
> +      - enum:
> +          - snps,designware-i2s
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    description: |
> +      The interrupt line number for the I2S controller. Add this
> +      parameter if the I2S controller that you are using does not
> +      support DMA.
> +    maxItems: 1
> +
> +  clocks:
> +    description: Sampling rate reference clock

How many?

> +
> +  clock-names:
> +    const: i2sclk
> +
> +  resets:
> +    maxItems: 1
> +
> +  dmas:
> +    items:
> +      - description: TX DMA Channel
> +      - description: RX DMA Channel
> +    minItems: 1
> +
> +  dma-names:
> +    items:
> +      - const: tx
> +      - const: rx
> +    minItems: 1
> +
> +if:
> +  properties:
> +    compatible:
> +      contains:
> +        const: canaan,k210-i2s
> +
> +then:
> +  properties:
> +    "#sound-dai-cells":
> +      const: 1
> +
> +else:
> +  properties:
> +    "#sound-dai-cells":
> +      const: 0
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +
> +oneOf:
> +  - required:
> +      - dmas
> +      - dma-names
> +  - required:
> +      - interrupts
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    soc_i2s: i2s@7ff90000 {
> +      compatible = "snps,designware-i2s";
> +      reg = <0x7ff90000 0x1000>;
> +      clocks = <&scpi_i2sclk 0>;
> +      clock-names = "i2sclk";
> +      #sound-dai-cells = <0>;
> +      dmas = <&dma0 5>;
> +      dma-names = "tx";
> +    };
> -- 
> 2.36.1
> 
>