Re: [PATCH v7 2/3] dt-bindings: mfd: atmel,sama5d2-flexcom: Add new compatible string for lan966x

[Rob Herring <robh@kernel.org>]

On Wed, Jul 06, 2022 at 09:06:18AM -0200, Kavyasree Kotagiri wrote:
> LAN966x SoC flexcoms has two optional I/O lines. Namely, CS0 and CS1
> in flexcom SPI mode. CTS and RTS in flexcom USART mode. These pins
> can be mapped to lan966x FLEXCOM_SHARED[0-20] pins and usage depends on
> functions being configured.
> 
> Signed-off-by: Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com>
> ---
> v6 -> v7:
>  - Add #address-cells, #size-cells to flx3 example.
> 
> v5 -> v6:
>  - Removed spi node from flx3 example.
> 
> v4 -> v5:
>  - Fixed indentations and dt-schema errors.
>  - No errors seen with 'make dt_binding_check'.
> 
> v3 -> v4:
>  - Added else condition to allOf:if:then.
> 
> v2 -> v3:
>  - Add reg property of lan966x missed in v2.
> 
> v1 -> v2:
>  - Use allOf:if:then for lan966x dt properties
> 
>  .../bindings/mfd/atmel,sama5d2-flexcom.yaml   | 65 ++++++++++++++++++-
>  1 file changed, 64 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/mfd/atmel,sama5d2-flexcom.yaml b/Documentation/devicetree/bindings/mfd/atmel,sama5d2-flexcom.yaml
> index 864f490ffb83..b4b47accab49 100644
> --- a/Documentation/devicetree/bindings/mfd/atmel,sama5d2-flexcom.yaml
> +++ b/Documentation/devicetree/bindings/mfd/atmel,sama5d2-flexcom.yaml
> @@ -18,9 +18,11 @@ properties:
>    compatible:
>      enum:
>        - atmel,sama5d2-flexcom
> +      - microchip,lan966x-flexcom

Don't use wildcards in compatible strings.

>  
>    reg:
> -    maxItems: 1
> +    minItems: 1
> +    maxItems: 2
>  
>    clocks:
>      maxItems: 1
> @@ -47,6 +49,27 @@ properties:
>      $ref: /schemas/types.yaml#/definitions/uint32
>      enum: [1, 2, 3]
>  
> +  microchip,flx-shrd-pins:
> +    description: Specify the Flexcom shared pins to be used for flexcom
> +      chip-selects.
> +    $ref: /schemas/types.yaml#/definitions/uint32-array
> +    minItems: 1
> +    maxItems: 2
> +    items:
> +      minimum: 0
> +      maximum: 20

It's not clear how one uses this. It's selecting 2 pins, or a range of 
pins, or ???

> +
> +  microchip,flx-cs:
> +    description: Flexcom chip selects. Here, value of '0' represents "cts" line
> +      of flexcom USART or "cs0" line of flexcom SPI and value of '1' represents
> +      "rts" line of flexcom USART or "cs1" line of flexcom SPI.
> +    $ref: /schemas/types.yaml#/definitions/uint32-array
> +    minItems: 1
> +    maxItems: 2
> +    items:
> +      minimum: 0
> +      maximum: 1
> +
>  required:
>    - compatible
>    - reg
> @@ -56,6 +79,31 @@ required:
>    - ranges
>    - atmel,flexcom-mode
>  
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: microchip,lan966x-flexcom
> +
> +    then:
> +      properties:
> +        reg:
> +          items:
> +            - description: Flexcom base registers map
> +            - description: Flexcom shared registers map
> +      required:
> +        - microchip,flx-shrd-pins
> +        - microchip,flx-cs
> +
> +    else:
> +      properties:
> +        reg:
> +          items:
> +            - description: Flexcom base registers map
> +        microchip,flx-shrd-pins: false
> +        microchip,flx-cs: false
> +
>  additionalProperties: false
>  
>  examples:
> @@ -71,4 +119,19 @@ examples:
>          ranges = <0x0 0xf8034000 0x800>;
>          atmel,flexcom-mode = <2>;
>      };
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    flx3: flexcom@e0064000 {
> +        compatible = "microchip,lan966x-flexcom";
> +        reg = <0xe0064000 0x100>,
> +              <0xe2004180 0x8>;
> +        clocks = <&flx0_clk>;
> +        #address-cells = <1>;
> +        #size-cells = <1>;
> +        ranges = <0x0 0xe0040000 0x800>;
> +        atmel,flexcom-mode = <2>;
> +        microchip,flx-shrd-pins = <9>;
> +        microchip,flx-cs = <0>;
> +    };
>  ...
> -- 
> 2.25.1
> 
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel