From: Christian Marangi <ansuelsmth@gmail.com>
To: Andrew Lunn <andrew@lunn.ch>,
Vivien Didelot <vivien.didelot@gmail.com>,
Florian Fainelli <f.fainelli@gmail.com>,
Vladimir Oltean <olteanv@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Jens Axboe <axboe@kernel.dk>,
Christian Marangi <ansuelsmth@gmail.com>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [net-next PATCH] net: dsa: qca8k: move driver to qca dir
Date: Wed, 13 Jul 2022 22:53:50 +0200 [thread overview]
Message-ID: <20220713205350.18357-1-ansuelsmth@gmail.com> (raw)
Move qca8k driver to qca dir in preparation for code split and
introduction of ipq4019 switch based on qca8k.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
This is a start for the required changes for code
split. Greg wasn't so negative about this kind of change
so I think we can finally make the move.
Still waiting some comments about the code split.
(Can I split qca8k to common function that will be
used by ipq4019? (and later propose the actual
ipq4019 driver?))
drivers/net/dsa/Kconfig | 8 --------
drivers/net/dsa/Makefile | 1 -
drivers/net/dsa/qca/Kconfig | 8 ++++++++
drivers/net/dsa/qca/Makefile | 1 +
drivers/net/dsa/{ => qca}/qca8k.c | 0
drivers/net/dsa/{ => qca}/qca8k.h | 0
6 files changed, 9 insertions(+), 9 deletions(-)
rename drivers/net/dsa/{ => qca}/qca8k.c (100%)
rename drivers/net/dsa/{ => qca}/qca8k.h (100%)
diff --git a/drivers/net/dsa/Kconfig b/drivers/net/dsa/Kconfig
index 702d68ae435a..d8ae0e8af2a0 100644
--- a/drivers/net/dsa/Kconfig
+++ b/drivers/net/dsa/Kconfig
@@ -60,14 +60,6 @@ source "drivers/net/dsa/sja1105/Kconfig"
source "drivers/net/dsa/xrs700x/Kconfig"
-config NET_DSA_QCA8K
- tristate "Qualcomm Atheros QCA8K Ethernet switch family support"
- select NET_DSA_TAG_QCA
- select REGMAP
- help
- This enables support for the Qualcomm Atheros QCA8K Ethernet
- switch chips.
-
source "drivers/net/dsa/realtek/Kconfig"
config NET_DSA_RZN1_A5PSW
diff --git a/drivers/net/dsa/Makefile b/drivers/net/dsa/Makefile
index b32907afa702..16eb879e0cb4 100644
--- a/drivers/net/dsa/Makefile
+++ b/drivers/net/dsa/Makefile
@@ -8,7 +8,6 @@ endif
obj-$(CONFIG_NET_DSA_LANTIQ_GSWIP) += lantiq_gswip.o
obj-$(CONFIG_NET_DSA_MT7530) += mt7530.o
obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
-obj-$(CONFIG_NET_DSA_QCA8K) += qca8k.o
obj-$(CONFIG_NET_DSA_RZN1_A5PSW) += rzn1_a5psw.o
obj-$(CONFIG_NET_DSA_SMSC_LAN9303) += lan9303-core.o
obj-$(CONFIG_NET_DSA_SMSC_LAN9303_I2C) += lan9303_i2c.o
diff --git a/drivers/net/dsa/qca/Kconfig b/drivers/net/dsa/qca/Kconfig
index 13b7e679b8b5..ba339747362c 100644
--- a/drivers/net/dsa/qca/Kconfig
+++ b/drivers/net/dsa/qca/Kconfig
@@ -7,3 +7,11 @@ config NET_DSA_AR9331
help
This enables support for the Qualcomm Atheros AR9331 built-in Ethernet
switch.
+
+config NET_DSA_QCA8K
+ tristate "Qualcomm Atheros QCA8K Ethernet switch family support"
+ select NET_DSA_TAG_QCA
+ select REGMAP
+ help
+ This enables support for the Qualcomm Atheros QCA8K Ethernet
+ switch chips.
diff --git a/drivers/net/dsa/qca/Makefile b/drivers/net/dsa/qca/Makefile
index 274022319066..40bb7c27285b 100644
--- a/drivers/net/dsa/qca/Makefile
+++ b/drivers/net/dsa/qca/Makefile
@@ -1,2 +1,3 @@
# SPDX-License-Identifier: GPL-2.0-only
obj-$(CONFIG_NET_DSA_AR9331) += ar9331.o
+obj-$(CONFIG_NET_DSA_QCA8K) += qca8k.o
diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca/qca8k.c
similarity index 100%
rename from drivers/net/dsa/qca8k.c
rename to drivers/net/dsa/qca/qca8k.c
diff --git a/drivers/net/dsa/qca8k.h b/drivers/net/dsa/qca/qca8k.h
similarity index 100%
rename from drivers/net/dsa/qca8k.h
rename to drivers/net/dsa/qca/qca8k.h
--
2.36.1
next reply other threads:[~2022-07-13 20:54 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-13 20:53 Christian Marangi [this message]
2022-07-13 21:02 ` [net-next PATCH] net: dsa: qca8k: move driver to qca dir Florian Fainelli
2022-07-15 5:03 ` Jakub Kicinski
2022-07-15 1:57 ` Christian Marangi
2022-07-15 19:37 ` Jakub Kicinski
2022-07-15 19:16 ` Christian Marangi
2022-07-15 19:47 ` Jakub Kicinski
2022-07-15 19:25 ` Christian Marangi
2022-07-15 11:10 ` patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220713205350.18357-1-ansuelsmth@gmail.com \
--to=ansuelsmth@gmail.com \
--cc=andrew@lunn.ch \
--cc=axboe@kernel.dk \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=f.fainelli@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=pabeni@redhat.com \
--cc=vivien.didelot@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.