* [Buildroot] [PATCH v2] configs/imx8mmevk: new defconfig
@ 2022-01-14 2:45 Fabio Estevam
2022-01-15 6:56 ` Heiko Thiery
2022-07-24 13:40 ` Thomas Petazzoni via buildroot
0 siblings, 2 replies; 4+ messages in thread
From: Fabio Estevam @ 2022-01-14 2:45 UTC (permalink / raw)
To: buildroot; +Cc: heiko.thiery, Fabio Estevam, frieder.schrempf
Add support for imx8mmevk_defconfig that allows booting kernel, U-Boot and
TFA from the upstream repositories.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
---
Changes since v1:
- Also use TF-A and U-Boot upstream versions.
DEVELOPERS | 1 +
board/freescale/imx8mmevk/genimage.cfg | 16 ++++++++
board/freescale/imx8mmevk/readme.txt | 6 +++
.../boot/extlinux/extlinux.conf | 4 ++
configs/imx8mmevk_defconfig | 39 +++++++++++++++++++
5 files changed, 66 insertions(+)
create mode 100644 board/freescale/imx8mmevk/genimage.cfg
create mode 100644 board/freescale/imx8mmevk/rootfs_overlay/boot/extlinux/extlinux.conf
create mode 100644 configs/imx8mmevk_defconfig
diff --git a/DEVELOPERS b/DEVELOPERS
index 12777e8d61..e19072a14e 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -839,6 +839,7 @@ F: configs/imx6ullevk_defconfig
F: configs/imx6ulpico_defconfig
F: configs/imx7d-sdb_defconfig
F: configs/imx7dpico_defconfig
+F: configs/imx8mmevk_defconfig
F: configs/imx8mqevk_defconfig
F: configs/mx25pdk_defconfig
F: configs/mx51evk_defconfig
diff --git a/board/freescale/imx8mmevk/genimage.cfg b/board/freescale/imx8mmevk/genimage.cfg
new file mode 100644
index 0000000000..3a83aa1f03
--- /dev/null
+++ b/board/freescale/imx8mmevk/genimage.cfg
@@ -0,0 +1,16 @@
+image sdcard.img {
+ hdimage {
+ }
+
+ partition imx-boot {
+ in-partition-table = "no"
+ image = "flash.bin"
+ offset = 33k
+ }
+
+ partition rootfs {
+ partition-type = 0x83
+ image = "rootfs.ext4"
+ offset = 8M
+ }
+}
diff --git a/board/freescale/imx8mmevk/readme.txt b/board/freescale/imx8mmevk/readme.txt
index 7b69405d30..a8e80a48f9 100644
--- a/board/freescale/imx8mmevk/readme.txt
+++ b/board/freescale/imx8mmevk/readme.txt
@@ -10,8 +10,14 @@ Build
First, configure Buildroot for the i.MX8MM EVK board:
+If you want to use the NXP kernel:
+
make freescale_imx8mmevk_defconfig
+Or if you want to use a mainline kernel:
+
+ make imx8mmevk_defconfig
+
Build all components:
make
diff --git a/board/freescale/imx8mmevk/rootfs_overlay/boot/extlinux/extlinux.conf b/board/freescale/imx8mmevk/rootfs_overlay/boot/extlinux/extlinux.conf
new file mode 100644
index 0000000000..0ba2e4cbfc
--- /dev/null
+++ b/board/freescale/imx8mmevk/rootfs_overlay/boot/extlinux/extlinux.conf
@@ -0,0 +1,4 @@
+Label imx8mm-evk-buildroot
+ kernel /boot/Image
+ devicetree /boot/imx8mm-evk.dtb
+ append root=/dev/mmcblk1p1 rootwait rw
diff --git a/configs/imx8mmevk_defconfig b/configs/imx8mmevk_defconfig
new file mode 100644
index 0000000000..170b8d273b
--- /dev/null
+++ b/configs/imx8mmevk_defconfig
@@ -0,0 +1,39 @@
+BR2_aarch64=y
+BR2_ARM_FPU_VFPV3=y
+BR2_TARGET_GENERIC_GETTY_PORT="ttymxc1"
+BR2_ROOTFS_OVERLAY="board/freescale/imx8mmevk/rootfs_overlay"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/freescale/imx8mmevk/genimage.cfg"
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.14"
+BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="freescale/imx8mm-evk"
+BR2_LINUX_KERNEL_INSTALL_TARGET=y
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
+BR2_PACKAGE_FREESCALE_IMX=y
+BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MM=y
+BR2_PACKAGE_FIRMWARE_IMX=y
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_TARGET_ROOTFS_EXT2_SIZE="240M"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.6"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="imx8mm"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="IMX_BOOT_UART_BASE=0x30890000"
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.01"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx8mm_evk"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_PYTHON3=y
+BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
+BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
+BR2_TARGET_UBOOT_NEEDS_IMX_FIRMWARE=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="flash.bin"
+BR2_TARGET_UBOOT_SPL=y
+BR2_PACKAGE_HOST_GENIMAGE=y
--
2.25.1
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 4+ messages in thread* Re: [Buildroot] [PATCH v2] configs/imx8mmevk: new defconfig
2022-01-14 2:45 [Buildroot] [PATCH v2] configs/imx8mmevk: new defconfig Fabio Estevam
@ 2022-01-15 6:56 ` Heiko Thiery
2022-01-15 12:10 ` Fabio Estevam
2022-07-24 13:40 ` Thomas Petazzoni via buildroot
1 sibling, 1 reply; 4+ messages in thread
From: Heiko Thiery @ 2022-01-15 6:56 UTC (permalink / raw)
To: Fabio Estevam; +Cc: frieder.schrempf, buildroot
Hi Fabio,
Am Fr., 14. Jan. 2022 um 03:46 Uhr schrieb Fabio Estevam <festevam@gmail.com>:
>
> Add support for imx8mmevk_defconfig that allows booting kernel, U-Boot and
> TFA from the upstream repositories.
>
> Signed-off-by: Fabio Estevam <festevam@gmail.com>
> ---
> Changes since v1:
> - Also use TF-A and U-Boot upstream versions.
>
> DEVELOPERS | 1 +
> board/freescale/imx8mmevk/genimage.cfg | 16 ++++++++
> board/freescale/imx8mmevk/readme.txt | 6 +++
> .../boot/extlinux/extlinux.conf | 4 ++
> configs/imx8mmevk_defconfig | 39 +++++++++++++++++++
> 5 files changed, 66 insertions(+)
> create mode 100644 board/freescale/imx8mmevk/genimage.cfg
> create mode 100644 board/freescale/imx8mmevk/rootfs_overlay/boot/extlinux/extlinux.conf
> create mode 100644 configs/imx8mmevk_defconfig
>
> diff --git a/DEVELOPERS b/DEVELOPERS
> index 12777e8d61..e19072a14e 100644
> --- a/DEVELOPERS
> +++ b/DEVELOPERS
> @@ -839,6 +839,7 @@ F: configs/imx6ullevk_defconfig
> F: configs/imx6ulpico_defconfig
> F: configs/imx7d-sdb_defconfig
> F: configs/imx7dpico_defconfig
> +F: configs/imx8mmevk_defconfig
> F: configs/imx8mqevk_defconfig
> F: configs/mx25pdk_defconfig
> F: configs/mx51evk_defconfig
> diff --git a/board/freescale/imx8mmevk/genimage.cfg b/board/freescale/imx8mmevk/genimage.cfg
> new file mode 100644
> index 0000000000..3a83aa1f03
> --- /dev/null
> +++ b/board/freescale/imx8mmevk/genimage.cfg
> @@ -0,0 +1,16 @@
> +image sdcard.img {
> + hdimage {
> + }
> +
> + partition imx-boot {
> + in-partition-table = "no"
> + image = "flash.bin"
> + offset = 33k
Giulio pointed out to me that the units should be described with
capital letters.
> + }
> +
> + partition rootfs {
> + partition-type = 0x83
> + image = "rootfs.ext4"
> + offset = 8M
> + }
> +}
> diff --git a/board/freescale/imx8mmevk/readme.txt b/board/freescale/imx8mmevk/readme.txt
> index 7b69405d30..a8e80a48f9 100644
> --- a/board/freescale/imx8mmevk/readme.txt
> +++ b/board/freescale/imx8mmevk/readme.txt
> @@ -10,8 +10,14 @@ Build
>
> First, configure Buildroot for the i.MX8MM EVK board:
>
> +If you want to use the NXP kernel:
> +
> make freescale_imx8mmevk_defconfig
>
> +Or if you want to use a mainline kernel:
> +
> + make imx8mmevk_defconfig
> +
> Build all components:
>
> make
> diff --git a/board/freescale/imx8mmevk/rootfs_overlay/boot/extlinux/extlinux.conf b/board/freescale/imx8mmevk/rootfs_overlay/boot/extlinux/extlinux.conf
> new file mode 100644
> index 0000000000..0ba2e4cbfc
> --- /dev/null
> +++ b/board/freescale/imx8mmevk/rootfs_overlay/boot/extlinux/extlinux.conf
> @@ -0,0 +1,4 @@
> +Label imx8mm-evk-buildroot
> + kernel /boot/Image
> + devicetree /boot/imx8mm-evk.dtb
> + append root=/dev/mmcblk1p1 rootwait rw
I my respin I used:
append root=PARTUUID=%PARTUUID% rootwait rw
The UUID is created in a post-build.sh script and set it in
extlinux.conf and genimage.cfg
With that the image would not limited to be located on the SD card.
> diff --git a/configs/imx8mmevk_defconfig b/configs/imx8mmevk_defconfig
> new file mode 100644
> index 0000000000..170b8d273b
> --- /dev/null
> +++ b/configs/imx8mmevk_defconfig
> @@ -0,0 +1,39 @@
> +BR2_aarch64=y
> +BR2_ARM_FPU_VFPV3=y
> +BR2_TARGET_GENERIC_GETTY_PORT="ttymxc1"
> +BR2_ROOTFS_OVERLAY="board/freescale/imx8mmevk/rootfs_overlay"
> +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
> +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/freescale/imx8mmevk/genimage.cfg"
> +BR2_LINUX_KERNEL=y
> +BR2_LINUX_KERNEL_CUSTOM_VERSION=y
> +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.14"
> +BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
> +BR2_LINUX_KERNEL_DTS_SUPPORT=y
> +BR2_LINUX_KERNEL_INTREE_DTS_NAME="freescale/imx8mm-evk"
> +BR2_LINUX_KERNEL_INSTALL_TARGET=y
> +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
> +BR2_PACKAGE_FREESCALE_IMX=y
> +BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MM=y
> +BR2_PACKAGE_FIRMWARE_IMX=y
> +BR2_TARGET_ROOTFS_EXT2=y
> +BR2_TARGET_ROOTFS_EXT2_4=y
> +BR2_TARGET_ROOTFS_EXT2_SIZE="240M"
Do you need 240MB here?
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.6"
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="imx8mm"
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="IMX_BOOT_UART_BASE=0x30890000"
> +BR2_TARGET_UBOOT=y
> +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
> +BR2_TARGET_UBOOT_CUSTOM_VERSION=y
> +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.01"
> +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx8mm_evk"
> +BR2_TARGET_UBOOT_NEEDS_DTC=y
> +BR2_TARGET_UBOOT_NEEDS_PYTHON3=y
> +BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
> +BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
> +BR2_TARGET_UBOOT_NEEDS_IMX_FIRMWARE=y
> +BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
> +BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="flash.bin"
> +BR2_TARGET_UBOOT_SPL=y
> +BR2_PACKAGE_HOST_GENIMAGE=y
> --
> 2.25.1
>
--
Heiko
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [Buildroot] [PATCH v2] configs/imx8mmevk: new defconfig
2022-01-15 6:56 ` Heiko Thiery
@ 2022-01-15 12:10 ` Fabio Estevam
0 siblings, 0 replies; 4+ messages in thread
From: Fabio Estevam @ 2022-01-15 12:10 UTC (permalink / raw)
To: Heiko Thiery; +Cc: Schrempf Frieder, buildroot
Hi Heiko,
On Sat, Jan 15, 2022 at 3:56 AM Heiko Thiery <heiko.thiery@gmail.com> wrote:
> > + partition imx-boot {
> > + in-partition-table = "no"
> > + image = "flash.bin"
> > + offset = 33k
>
> Giulio pointed out to me that the units should be described with
> capital letters.
Thanks for pointing this out. I will change it.
In the long term, we could probably use a common genimage.cfg too.
> I my respin I used:
>
> append root=PARTUUID=%PARTUUID% rootwait rw
>
> The UUID is created in a post-build.sh script and set it in
> extlinux.conf and genimage.cfg
>
> With that the image would not limited to be located on the SD card.
Good idea. Will change it.
> > +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
> > +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y
> > +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.6"
On my tests, I noticed that if I build U-Boot 2022.01 + TF-A mainline,
then the kernel 5.16 does not boot.
Using TF-A from the NXP BSP allows me to boot 5.16 without issues.
I will try to investigate why this happens with imx8mm-evk, as your
board does not show issues.
Thanks
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Buildroot] [PATCH v2] configs/imx8mmevk: new defconfig
2022-01-14 2:45 [Buildroot] [PATCH v2] configs/imx8mmevk: new defconfig Fabio Estevam
2022-01-15 6:56 ` Heiko Thiery
@ 2022-07-24 13:40 ` Thomas Petazzoni via buildroot
1 sibling, 0 replies; 4+ messages in thread
From: Thomas Petazzoni via buildroot @ 2022-07-24 13:40 UTC (permalink / raw)
To: Fabio Estevam; +Cc: heiko.thiery, frieder.schrempf, buildroot
Hello Fabio,
On Thu, 13 Jan 2022 23:45:55 -0300
Fabio Estevam <festevam@gmail.com> wrote:
> Add support for imx8mmevk_defconfig that allows booting kernel, U-Boot and
> TFA from the upstream repositories.
>
> Signed-off-by: Fabio Estevam <festevam@gmail.com>
> ---
> Changes since v1:
> - Also use TF-A and U-Boot upstream versions.
You had some comments from Heiko on this patch, and you said you would
come back with a newer version, but unless I missed it, I couldn't find
a v3.
I'll now mark this v2 as Changes Requested in patchwork, so if you
don't submit a v3, we will most likely forget about this topic. But it
would be good to have a defconfig for the i.MX8MM EVK.
Thanks a lot!
Thomas
--
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2022-07-24 13:40 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2022-01-14 2:45 [Buildroot] [PATCH v2] configs/imx8mmevk: new defconfig Fabio Estevam
2022-01-15 6:56 ` Heiko Thiery
2022-01-15 12:10 ` Fabio Estevam
2022-07-24 13:40 ` Thomas Petazzoni via buildroot
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.