All of lore.kernel.org
 help / color / mirror / Atom feed
From: Marek Vasut <marex@denx.de>
To: linux-gpio@vger.kernel.org
Cc: Marek Vasut <marex@denx.de>,
	Bartosz Golaszewski <bgolaszewski@baylibre.com>,
	Linus Walleij <linus.walleij@linaro.org>,
	Loic Poulain <loic.poulain@linaro.org>,
	Marc Zyngier <maz@kernel.org>, NXP Linux Team <linux-imx@nxp.com>,
	Peng Fan <peng.fan@nxp.com>, Shawn Guo <shawnguo@kernel.org>
Subject: [PATCH v5 1/2] gpio: mxc: Protect GPIO irqchip RMW with bgpio spinlock
Date: Mon, 25 Jul 2022 12:34:44 +0200	[thread overview]
Message-ID: <20220725103445.88674-2-marex@denx.de> (raw)
In-Reply-To: <20220725103445.88674-1-marex@denx.de>

The driver currently performs register read-modify-write without locking
in its irqchip part, this could lead to a race condition when configuring
interrupt mode setting. Add the missing bgpio spinlock lock/unlock around
the register read-modify-write.

Fixes: 07bd1a6cc7cbb ("MXC arch: Add gpio support for the whole platform")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Loic Poulain <loic.poulain@linaro.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
---
V3: New patch
V4: Include linux/spinlock.h
V5: Use raw_spinlock per 3c938cc5cebcb ("gpio: use raw spinlock for gpio chip shadowed data")
---
 drivers/gpio/gpio-mxc.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c
index c871602fc5ba9..6cc98a5684ae1 100644
--- a/drivers/gpio/gpio-mxc.c
+++ b/drivers/gpio/gpio-mxc.c
@@ -18,6 +18,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
+#include <linux/spinlock.h>
 #include <linux/syscore_ops.h>
 #include <linux/gpio/driver.h>
 #include <linux/of.h>
@@ -147,6 +148,7 @@ static int gpio_set_irq_type(struct irq_data *d, u32 type)
 {
 	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
 	struct mxc_gpio_port *port = gc->private;
+	unsigned long flags;
 	u32 bit, val;
 	u32 gpio_idx = d->hwirq;
 	int edge;
@@ -185,6 +187,8 @@ static int gpio_set_irq_type(struct irq_data *d, u32 type)
 		return -EINVAL;
 	}
 
+	raw_spin_lock_irqsave(&port->gc.bgpio_lock, flags);
+
 	if (GPIO_EDGE_SEL >= 0) {
 		val = readl(port->base + GPIO_EDGE_SEL);
 		if (edge == GPIO_INT_BOTH_EDGES)
@@ -204,15 +208,20 @@ static int gpio_set_irq_type(struct irq_data *d, u32 type)
 
 	writel(1 << gpio_idx, port->base + GPIO_ISR);
 
+	raw_spin_unlock_irqrestore(&port->gc.bgpio_lock, flags);
+
 	return 0;
 }
 
 static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio)
 {
 	void __iomem *reg = port->base;
+	unsigned long flags;
 	u32 bit, val;
 	int edge;
 
+	raw_spin_lock_irqsave(&port->gc.bgpio_lock, flags);
+
 	reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */
 	bit = gpio & 0xf;
 	val = readl(reg);
@@ -230,6 +239,8 @@ static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio)
 		return;
 	}
 	writel(val | (edge << (bit << 1)), reg);
+
+	raw_spin_unlock_irqrestore(&port->gc.bgpio_lock, flags);
 }
 
 /* handle 32 interrupts in one status register */
-- 
2.35.1


  reply	other threads:[~2022-07-25 10:35 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-07-25 10:34 [PATCH v5 0/2] gpio: mxc: Locking and direction input fix Marek Vasut
2022-07-25 10:34 ` Marek Vasut [this message]
2022-07-25 22:36   ` [PATCH v5 1/2] gpio: mxc: Protect GPIO irqchip RMW with bgpio spinlock Linus Walleij
2022-07-25 10:34 ` [PATCH v5 2/2] gpio: mxc: Always set GPIOs used as interrupt source to INPUT mode Marek Vasut
2022-07-25 20:40   ` Andy Shevchenko
2022-07-25 15:50 ` [PATCH v5 0/2] gpio: mxc: Locking and direction input fix Marc Zyngier
2022-08-23 10:41   ` Marek Vasut
2022-08-23 14:20     ` Marc Zyngier
2022-09-29 17:35       ` Marek Vasut
2022-08-26  8:40 ` Linus Walleij

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220725103445.88674-2-marex@denx.de \
    --to=marex@denx.de \
    --cc=bgolaszewski@baylibre.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-imx@nxp.com \
    --cc=loic.poulain@linaro.org \
    --cc=maz@kernel.org \
    --cc=peng.fan@nxp.com \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.