* [Buildroot] [PATCH] configs/kontron_bl_imx8mm_defconfig: Bump U-Boot
@ 2022-04-21 21:56 Fabio Estevam
2022-04-22 6:02 ` Heiko Thiery
2022-07-26 13:14 ` Thomas Petazzoni via buildroot
0 siblings, 2 replies; 4+ messages in thread
From: Fabio Estevam @ 2022-04-21 21:56 UTC (permalink / raw)
To: buildroot; +Cc: heiko.thiery, Fabio Estevam, frieder.schrempf
Bump U-Boot to version 2022.04 and remove the two patches
that have already been upstreamed.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
---
Hi Heiko,
This is not tested.
Did it by inspection.
...m-kontron-n801x-s-convert-options-to.patch | 31 --
...m-kontron-n801x-s-add-common-board-u.patch | 305 ------------------
configs/kontron_bl_imx8mm_defconfig | 4 +-
3 files changed, 1 insertion(+), 339 deletions(-)
delete mode 100644 board/kontron/bl-imx8mm/patches/uboot/0001-imx-imx8mm-imx8mm-kontron-n801x-s-convert-options-to.patch
delete mode 100644 board/kontron/bl-imx8mm/patches/uboot/0002-imx-imx8mm-imx8mm-kontron-n801x-s-add-common-board-u.patch
diff --git a/board/kontron/bl-imx8mm/patches/uboot/0001-imx-imx8mm-imx8mm-kontron-n801x-s-convert-options-to.patch b/board/kontron/bl-imx8mm/patches/uboot/0001-imx-imx8mm-imx8mm-kontron-n801x-s-convert-options-to.patch
deleted file mode 100644
index 6d76282defb2..000000000000
--- a/board/kontron/bl-imx8mm/patches/uboot/0001-imx-imx8mm-imx8mm-kontron-n801x-s-convert-options-to.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 95a311af81cd47c44d3d6e3f717f06a06d8f3dfd Mon Sep 17 00:00:00 2001
-From: Heiko Thiery <heiko.thiery@gmail.com>
-Date: Mon, 10 Jan 2022 14:13:02 +0100
-Subject: [PATCH 1/2] imx: imx8mm: imx8mm-kontron-n801x-s: convert options to Kconfig
-
-CONFIG_SPL_MMC and CONFIG_SPL_SERIAL
-
-Patch submitted upstream:
-https://patchwork.ozlabs.org/project/uboot/patch/20220112085755.7396-1-heiko.thiery@gmail.com/
-
-Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
----
- configs/kontron-sl-mx8mm_defconfig | 2 ++
- 1 file changed, 2 insertions(+)
-
-diff --git a/configs/kontron-sl-mx8mm_defconfig b/configs/kontron-sl-mx8mm_defconfig
-index 35d12fca32..940bf07a92 100644
---- a/configs/kontron-sl-mx8mm_defconfig
-+++ b/configs/kontron-sl-mx8mm_defconfig
-@@ -15,6 +15,8 @@ CONFIG_SPL_DM_SPI=y
- CONFIG_DEFAULT_DEVICE_TREE="imx8mm-kontron-n801x-s"
- CONFIG_SPL_TEXT_BASE=0x7E1000
- CONFIG_TARGET_KONTRON_MX8MM=y
-+CONFIG_SPL_MMC=y
-+CONFIG_SPL_SERIAL=y
- CONFIG_BOOTCOUNT_BOOTLIMIT=3
- CONFIG_SPL=y
- CONFIG_DISTRO_DEFAULTS=y
---
-2.30.2
-
diff --git a/board/kontron/bl-imx8mm/patches/uboot/0002-imx-imx8mm-imx8mm-kontron-n801x-s-add-common-board-u.patch b/board/kontron/bl-imx8mm/patches/uboot/0002-imx-imx8mm-imx8mm-kontron-n801x-s-add-common-board-u.patch
deleted file mode 100644
index a88d7aba870b..000000000000
--- a/board/kontron/bl-imx8mm/patches/uboot/0002-imx-imx8mm-imx8mm-kontron-n801x-s-add-common-board-u.patch
+++ /dev/null
@@ -1,305 +0,0 @@
-From ef694c19c074333fd16589ec6ffef3e7ca895186 Mon Sep 17 00:00:00 2001
-From: Heiko Thiery <heiko.thiery@gmail.com>
-Date: Wed, 12 Jan 2022 08:44:36 +0100
-Subject: [PATCH 2/2] imx: imx8mm: imx8mm-kontron-n801x-s: add common board
- u-boot.dtsi
-
-When using a board variant that selects the lvds specific dtb the
-*.u-boot.dtsi file will not be included. To have a lvds dtb specific
-u-boot.dtsi file move this part to a common board u-boot.dtsi file and
-include this in the board base u-boot.dtsi and create an additional one
-for the lvds variant.
-
-Patch submitted upstream:
-https://patchwork.ozlabs.org/project/uboot/patch/20220112085755.7396-2-heiko.thiery@gmail.com/
-
-Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
----
- .../imx8mm-kontron-n801x-s-lvds-u-boot.dtsi | 6 +
- .../dts/imx8mm-kontron-n801x-s-u-boot.dtsi | 124 +----------------
- arch/arm/dts/imx8mm-kontron-n801x-u-boot.dtsi | 128 ++++++++++++++++++
- 3 files changed, 135 insertions(+), 123 deletions(-)
- create mode 100644 arch/arm/dts/imx8mm-kontron-n801x-s-lvds-u-boot.dtsi
- create mode 100644 arch/arm/dts/imx8mm-kontron-n801x-u-boot.dtsi
-
-diff --git a/arch/arm/dts/imx8mm-kontron-n801x-s-lvds-u-boot.dtsi b/arch/arm/dts/imx8mm-kontron-n801x-s-lvds-u-boot.dtsi
-new file mode 100644
-index 0000000000..4bf75722bf
---- /dev/null
-+++ b/arch/arm/dts/imx8mm-kontron-n801x-s-lvds-u-boot.dtsi
-@@ -0,0 +1,6 @@
-+// SPDX-License-Identifier: GPL-2.0+
-+/*
-+ * Copyright (C) 2019 Kontron Electronics GmbH
-+ */
-+
-+#include "imx8mm-kontron-n801x-u-boot.dtsi"
-diff --git a/arch/arm/dts/imx8mm-kontron-n801x-s-u-boot.dtsi b/arch/arm/dts/imx8mm-kontron-n801x-s-u-boot.dtsi
-index 22d18e6f1c..4bf75722bf 100644
---- a/arch/arm/dts/imx8mm-kontron-n801x-s-u-boot.dtsi
-+++ b/arch/arm/dts/imx8mm-kontron-n801x-s-u-boot.dtsi
-@@ -3,126 +3,4 @@
- * Copyright (C) 2019 Kontron Electronics GmbH
- */
-
--#include "imx8mm-u-boot.dtsi"
--
--/ {
-- aliases {
-- usb0 = &usbotg1;
-- usb1 = &usbotg2;
-- };
--
-- wdt-reboot {
-- compatible = "wdt-reboot";
-- wdt = <&wdog1>;
-- u-boot,dm-spl;
-- };
--
-- firmware {
-- optee {
-- compatible = "linaro,optee-tz";
-- method = "smc";
-- };
-- };
--};
--
--&fec1 {
-- phy-mode = "rgmii-rxid";
--};
--
--&i2c1 {
-- u-boot,dm-spl;
-- u-boot,dm-pre-reloc;
--};
--
--&i2c2 {
-- status = "okay";
-- u-boot,dm-spl;
-- u-boot,dm-pre-reloc;
--};
--
--&pinctrl_ecspi1 {
-- u-boot,dm-spl;
--};
--
--&pinctrl_i2c1 {
-- u-boot,dm-spl;
--};
--
--&pinctrl_pmic {
-- u-boot,dm-spl;
-- fsl,pins = <
-- MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x141
-- /* Disable Pullup for SD_VSEL */
-- MX8MM_IOMUXC_GPIO1_IO04_GPIO1_IO4 0x41
-- >;
--};
--
--&pinctrl_uart3 {
-- u-boot,dm-spl;
-- u-boot,dm-pre-reloc;
--};
--
--&pinctrl_usdhc1 {
-- u-boot,dm-spl;
--};
--
--&pinctrl_usdhc1_100mhz {
-- u-boot,dm-spl;
--};
--
--&pinctrl_usdhc1_200mhz {
-- u-boot,dm-spl;
--};
--
--&pinctrl_usdhc2 {
-- u-boot,dm-spl;
--};
--
--&pca9450 {
-- u-boot,dm-spl;
--};
--
--&{/soc@0/bus@30800000/i2c@30a20000/pmic@25/regulators} {
-- u-boot,dm-spl;
--};
--
--&ecspi1 {
-- u-boot,dm-spl;
--};
--
--&gpio1 {
-- u-boot,dm-spl;
--};
--
--&gpio2 {
-- u-boot,dm-spl;
--};
--
--&gpio3 {
-- u-boot,dm-spl;
--};
--
--&gpio4 {
-- u-boot,dm-spl;
--};
--
--&gpio5 {
-- u-boot,dm-spl;
--};
--
--&uart3 {
-- u-boot,dm-spl;
-- u-boot,dm-pre-reloc;
--};
--
--&usdhc1 {
-- u-boot,dm-spl;
--};
--
--&usdhc2 {
-- u-boot,dm-spl;
--};
--
--&wdog1 {
-- u-boot,dm-spl;
--};
-+#include "imx8mm-kontron-n801x-u-boot.dtsi"
-diff --git a/arch/arm/dts/imx8mm-kontron-n801x-u-boot.dtsi b/arch/arm/dts/imx8mm-kontron-n801x-u-boot.dtsi
-new file mode 100644
-index 0000000000..22d18e6f1c
---- /dev/null
-+++ b/arch/arm/dts/imx8mm-kontron-n801x-u-boot.dtsi
-@@ -0,0 +1,128 @@
-+// SPDX-License-Identifier: GPL-2.0+
-+/*
-+ * Copyright (C) 2019 Kontron Electronics GmbH
-+ */
-+
-+#include "imx8mm-u-boot.dtsi"
-+
-+/ {
-+ aliases {
-+ usb0 = &usbotg1;
-+ usb1 = &usbotg2;
-+ };
-+
-+ wdt-reboot {
-+ compatible = "wdt-reboot";
-+ wdt = <&wdog1>;
-+ u-boot,dm-spl;
-+ };
-+
-+ firmware {
-+ optee {
-+ compatible = "linaro,optee-tz";
-+ method = "smc";
-+ };
-+ };
-+};
-+
-+&fec1 {
-+ phy-mode = "rgmii-rxid";
-+};
-+
-+&i2c1 {
-+ u-boot,dm-spl;
-+ u-boot,dm-pre-reloc;
-+};
-+
-+&i2c2 {
-+ status = "okay";
-+ u-boot,dm-spl;
-+ u-boot,dm-pre-reloc;
-+};
-+
-+&pinctrl_ecspi1 {
-+ u-boot,dm-spl;
-+};
-+
-+&pinctrl_i2c1 {
-+ u-boot,dm-spl;
-+};
-+
-+&pinctrl_pmic {
-+ u-boot,dm-spl;
-+ fsl,pins = <
-+ MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x141
-+ /* Disable Pullup for SD_VSEL */
-+ MX8MM_IOMUXC_GPIO1_IO04_GPIO1_IO4 0x41
-+ >;
-+};
-+
-+&pinctrl_uart3 {
-+ u-boot,dm-spl;
-+ u-boot,dm-pre-reloc;
-+};
-+
-+&pinctrl_usdhc1 {
-+ u-boot,dm-spl;
-+};
-+
-+&pinctrl_usdhc1_100mhz {
-+ u-boot,dm-spl;
-+};
-+
-+&pinctrl_usdhc1_200mhz {
-+ u-boot,dm-spl;
-+};
-+
-+&pinctrl_usdhc2 {
-+ u-boot,dm-spl;
-+};
-+
-+&pca9450 {
-+ u-boot,dm-spl;
-+};
-+
-+&{/soc@0/bus@30800000/i2c@30a20000/pmic@25/regulators} {
-+ u-boot,dm-spl;
-+};
-+
-+&ecspi1 {
-+ u-boot,dm-spl;
-+};
-+
-+&gpio1 {
-+ u-boot,dm-spl;
-+};
-+
-+&gpio2 {
-+ u-boot,dm-spl;
-+};
-+
-+&gpio3 {
-+ u-boot,dm-spl;
-+};
-+
-+&gpio4 {
-+ u-boot,dm-spl;
-+};
-+
-+&gpio5 {
-+ u-boot,dm-spl;
-+};
-+
-+&uart3 {
-+ u-boot,dm-spl;
-+ u-boot,dm-pre-reloc;
-+};
-+
-+&usdhc1 {
-+ u-boot,dm-spl;
-+};
-+
-+&usdhc2 {
-+ u-boot,dm-spl;
-+};
-+
-+&wdog1 {
-+ u-boot,dm-spl;
-+};
---
-2.30.2
-
diff --git a/configs/kontron_bl_imx8mm_defconfig b/configs/kontron_bl_imx8mm_defconfig
index 2b7e121e252e..705222df2833 100644
--- a/configs/kontron_bl_imx8mm_defconfig
+++ b/configs/kontron_bl_imx8mm_defconfig
@@ -3,8 +3,6 @@ BR2_aarch64=y
BR2_cortex_a53=y
BR2_ARM_FPU_VFPV3=y
-BR2_GLOBAL_PATCH_DIR="board/kontron/bl-imx8mm/patches"
-
# System
BR2_TARGET_GENERIC_GETTY_PORT="ttymxc2"
@@ -40,7 +38,7 @@ BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="IMX_BOOT_UART_BASE=0x30880
BR2_TARGET_UBOOT=y
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.01"
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.04"
BR2_TARGET_UBOOT_BOARD_DEFCONFIG="kontron-sl-mx8mm"
BR2_TARGET_UBOOT_NEEDS_DTC=y
BR2_TARGET_UBOOT_NEEDS_PYTHON3=y
--
2.25.1
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [Buildroot] [PATCH] configs/kontron_bl_imx8mm_defconfig: Bump U-Boot
2022-04-21 21:56 [Buildroot] [PATCH] configs/kontron_bl_imx8mm_defconfig: Bump U-Boot Fabio Estevam
@ 2022-04-22 6:02 ` Heiko Thiery
2022-04-23 15:27 ` Arnout Vandecappelle
2022-07-26 13:14 ` Thomas Petazzoni via buildroot
1 sibling, 1 reply; 4+ messages in thread
From: Heiko Thiery @ 2022-04-22 6:02 UTC (permalink / raw)
To: Fabio Estevam; +Cc: frieder.schrempf, buildroot
Hi Fabio,
Am Do., 21. Apr. 2022 um 23:56 Uhr schrieb Fabio Estevam <festevam@gmail.com>:
>
> Bump U-Boot to version 2022.04 and remove the two patches
> that have already been upstreamed.
>
> Signed-off-by: Fabio Estevam <festevam@gmail.com>
Thanks for doing this.
Acked-By: Heiko Thiery <heiko.thiery@gmail.com>
> ---
> Hi Heiko,
>
> This is not tested.
>
> Did it by inspection.
>
> ...m-kontron-n801x-s-convert-options-to.patch | 31 --
> ...m-kontron-n801x-s-add-common-board-u.patch | 305 ------------------
> configs/kontron_bl_imx8mm_defconfig | 4 +-
> 3 files changed, 1 insertion(+), 339 deletions(-)
> delete mode 100644 board/kontron/bl-imx8mm/patches/uboot/0001-imx-imx8mm-imx8mm-kontron-n801x-s-convert-options-to.patch
> delete mode 100644 board/kontron/bl-imx8mm/patches/uboot/0002-imx-imx8mm-imx8mm-kontron-n801x-s-add-common-board-u.patch
>
> diff --git a/board/kontron/bl-imx8mm/patches/uboot/0001-imx-imx8mm-imx8mm-kontron-n801x-s-convert-options-to.patch b/board/kontron/bl-imx8mm/patches/uboot/0001-imx-imx8mm-imx8mm-kontron-n801x-s-convert-options-to.patch
> deleted file mode 100644
> index 6d76282defb2..000000000000
> --- a/board/kontron/bl-imx8mm/patches/uboot/0001-imx-imx8mm-imx8mm-kontron-n801x-s-convert-options-to.patch
> +++ /dev/null
> @@ -1,31 +0,0 @@
> -From 95a311af81cd47c44d3d6e3f717f06a06d8f3dfd Mon Sep 17 00:00:00 2001
> -From: Heiko Thiery <heiko.thiery@gmail.com>
> -Date: Mon, 10 Jan 2022 14:13:02 +0100
> -Subject: [PATCH 1/2] imx: imx8mm: imx8mm-kontron-n801x-s: convert options to Kconfig
> -
> -CONFIG_SPL_MMC and CONFIG_SPL_SERIAL
> -
> -Patch submitted upstream:
> -https://patchwork.ozlabs.org/project/uboot/patch/20220112085755.7396-1-heiko.thiery@gmail.com/
> -
> -Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
> ----
> - configs/kontron-sl-mx8mm_defconfig | 2 ++
> - 1 file changed, 2 insertions(+)
> -
> -diff --git a/configs/kontron-sl-mx8mm_defconfig b/configs/kontron-sl-mx8mm_defconfig
> -index 35d12fca32..940bf07a92 100644
> ---- a/configs/kontron-sl-mx8mm_defconfig
> -+++ b/configs/kontron-sl-mx8mm_defconfig
> -@@ -15,6 +15,8 @@ CONFIG_SPL_DM_SPI=y
> - CONFIG_DEFAULT_DEVICE_TREE="imx8mm-kontron-n801x-s"
> - CONFIG_SPL_TEXT_BASE=0x7E1000
> - CONFIG_TARGET_KONTRON_MX8MM=y
> -+CONFIG_SPL_MMC=y
> -+CONFIG_SPL_SERIAL=y
> - CONFIG_BOOTCOUNT_BOOTLIMIT=3
> - CONFIG_SPL=y
> - CONFIG_DISTRO_DEFAULTS=y
> ---
> -2.30.2
> -
> diff --git a/board/kontron/bl-imx8mm/patches/uboot/0002-imx-imx8mm-imx8mm-kontron-n801x-s-add-common-board-u.patch b/board/kontron/bl-imx8mm/patches/uboot/0002-imx-imx8mm-imx8mm-kontron-n801x-s-add-common-board-u.patch
> deleted file mode 100644
> index a88d7aba870b..000000000000
> --- a/board/kontron/bl-imx8mm/patches/uboot/0002-imx-imx8mm-imx8mm-kontron-n801x-s-add-common-board-u.patch
> +++ /dev/null
> @@ -1,305 +0,0 @@
> -From ef694c19c074333fd16589ec6ffef3e7ca895186 Mon Sep 17 00:00:00 2001
> -From: Heiko Thiery <heiko.thiery@gmail.com>
> -Date: Wed, 12 Jan 2022 08:44:36 +0100
> -Subject: [PATCH 2/2] imx: imx8mm: imx8mm-kontron-n801x-s: add common board
> - u-boot.dtsi
> -
> -When using a board variant that selects the lvds specific dtb the
> -*.u-boot.dtsi file will not be included. To have a lvds dtb specific
> -u-boot.dtsi file move this part to a common board u-boot.dtsi file and
> -include this in the board base u-boot.dtsi and create an additional one
> -for the lvds variant.
> -
> -Patch submitted upstream:
> -https://patchwork.ozlabs.org/project/uboot/patch/20220112085755.7396-2-heiko.thiery@gmail.com/
> -
> -Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
> ----
> - .../imx8mm-kontron-n801x-s-lvds-u-boot.dtsi | 6 +
> - .../dts/imx8mm-kontron-n801x-s-u-boot.dtsi | 124 +----------------
> - arch/arm/dts/imx8mm-kontron-n801x-u-boot.dtsi | 128 ++++++++++++++++++
> - 3 files changed, 135 insertions(+), 123 deletions(-)
> - create mode 100644 arch/arm/dts/imx8mm-kontron-n801x-s-lvds-u-boot.dtsi
> - create mode 100644 arch/arm/dts/imx8mm-kontron-n801x-u-boot.dtsi
> -
> -diff --git a/arch/arm/dts/imx8mm-kontron-n801x-s-lvds-u-boot.dtsi b/arch/arm/dts/imx8mm-kontron-n801x-s-lvds-u-boot.dtsi
> -new file mode 100644
> -index 0000000000..4bf75722bf
> ---- /dev/null
> -+++ b/arch/arm/dts/imx8mm-kontron-n801x-s-lvds-u-boot.dtsi
> -@@ -0,0 +1,6 @@
> -+// SPDX-License-Identifier: GPL-2.0+
> -+/*
> -+ * Copyright (C) 2019 Kontron Electronics GmbH
> -+ */
> -+
> -+#include "imx8mm-kontron-n801x-u-boot.dtsi"
> -diff --git a/arch/arm/dts/imx8mm-kontron-n801x-s-u-boot.dtsi b/arch/arm/dts/imx8mm-kontron-n801x-s-u-boot.dtsi
> -index 22d18e6f1c..4bf75722bf 100644
> ---- a/arch/arm/dts/imx8mm-kontron-n801x-s-u-boot.dtsi
> -+++ b/arch/arm/dts/imx8mm-kontron-n801x-s-u-boot.dtsi
> -@@ -3,126 +3,4 @@
> - * Copyright (C) 2019 Kontron Electronics GmbH
> - */
> -
> --#include "imx8mm-u-boot.dtsi"
> --
> --/ {
> -- aliases {
> -- usb0 = &usbotg1;
> -- usb1 = &usbotg2;
> -- };
> --
> -- wdt-reboot {
> -- compatible = "wdt-reboot";
> -- wdt = <&wdog1>;
> -- u-boot,dm-spl;
> -- };
> --
> -- firmware {
> -- optee {
> -- compatible = "linaro,optee-tz";
> -- method = "smc";
> -- };
> -- };
> --};
> --
> --&fec1 {
> -- phy-mode = "rgmii-rxid";
> --};
> --
> --&i2c1 {
> -- u-boot,dm-spl;
> -- u-boot,dm-pre-reloc;
> --};
> --
> --&i2c2 {
> -- status = "okay";
> -- u-boot,dm-spl;
> -- u-boot,dm-pre-reloc;
> --};
> --
> --&pinctrl_ecspi1 {
> -- u-boot,dm-spl;
> --};
> --
> --&pinctrl_i2c1 {
> -- u-boot,dm-spl;
> --};
> --
> --&pinctrl_pmic {
> -- u-boot,dm-spl;
> -- fsl,pins = <
> -- MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x141
> -- /* Disable Pullup for SD_VSEL */
> -- MX8MM_IOMUXC_GPIO1_IO04_GPIO1_IO4 0x41
> -- >;
> --};
> --
> --&pinctrl_uart3 {
> -- u-boot,dm-spl;
> -- u-boot,dm-pre-reloc;
> --};
> --
> --&pinctrl_usdhc1 {
> -- u-boot,dm-spl;
> --};
> --
> --&pinctrl_usdhc1_100mhz {
> -- u-boot,dm-spl;
> --};
> --
> --&pinctrl_usdhc1_200mhz {
> -- u-boot,dm-spl;
> --};
> --
> --&pinctrl_usdhc2 {
> -- u-boot,dm-spl;
> --};
> --
> --&pca9450 {
> -- u-boot,dm-spl;
> --};
> --
> --&{/soc@0/bus@30800000/i2c@30a20000/pmic@25/regulators} {
> -- u-boot,dm-spl;
> --};
> --
> --&ecspi1 {
> -- u-boot,dm-spl;
> --};
> --
> --&gpio1 {
> -- u-boot,dm-spl;
> --};
> --
> --&gpio2 {
> -- u-boot,dm-spl;
> --};
> --
> --&gpio3 {
> -- u-boot,dm-spl;
> --};
> --
> --&gpio4 {
> -- u-boot,dm-spl;
> --};
> --
> --&gpio5 {
> -- u-boot,dm-spl;
> --};
> --
> --&uart3 {
> -- u-boot,dm-spl;
> -- u-boot,dm-pre-reloc;
> --};
> --
> --&usdhc1 {
> -- u-boot,dm-spl;
> --};
> --
> --&usdhc2 {
> -- u-boot,dm-spl;
> --};
> --
> --&wdog1 {
> -- u-boot,dm-spl;
> --};
> -+#include "imx8mm-kontron-n801x-u-boot.dtsi"
> -diff --git a/arch/arm/dts/imx8mm-kontron-n801x-u-boot.dtsi b/arch/arm/dts/imx8mm-kontron-n801x-u-boot.dtsi
> -new file mode 100644
> -index 0000000000..22d18e6f1c
> ---- /dev/null
> -+++ b/arch/arm/dts/imx8mm-kontron-n801x-u-boot.dtsi
> -@@ -0,0 +1,128 @@
> -+// SPDX-License-Identifier: GPL-2.0+
> -+/*
> -+ * Copyright (C) 2019 Kontron Electronics GmbH
> -+ */
> -+
> -+#include "imx8mm-u-boot.dtsi"
> -+
> -+/ {
> -+ aliases {
> -+ usb0 = &usbotg1;
> -+ usb1 = &usbotg2;
> -+ };
> -+
> -+ wdt-reboot {
> -+ compatible = "wdt-reboot";
> -+ wdt = <&wdog1>;
> -+ u-boot,dm-spl;
> -+ };
> -+
> -+ firmware {
> -+ optee {
> -+ compatible = "linaro,optee-tz";
> -+ method = "smc";
> -+ };
> -+ };
> -+};
> -+
> -+&fec1 {
> -+ phy-mode = "rgmii-rxid";
> -+};
> -+
> -+&i2c1 {
> -+ u-boot,dm-spl;
> -+ u-boot,dm-pre-reloc;
> -+};
> -+
> -+&i2c2 {
> -+ status = "okay";
> -+ u-boot,dm-spl;
> -+ u-boot,dm-pre-reloc;
> -+};
> -+
> -+&pinctrl_ecspi1 {
> -+ u-boot,dm-spl;
> -+};
> -+
> -+&pinctrl_i2c1 {
> -+ u-boot,dm-spl;
> -+};
> -+
> -+&pinctrl_pmic {
> -+ u-boot,dm-spl;
> -+ fsl,pins = <
> -+ MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x141
> -+ /* Disable Pullup for SD_VSEL */
> -+ MX8MM_IOMUXC_GPIO1_IO04_GPIO1_IO4 0x41
> -+ >;
> -+};
> -+
> -+&pinctrl_uart3 {
> -+ u-boot,dm-spl;
> -+ u-boot,dm-pre-reloc;
> -+};
> -+
> -+&pinctrl_usdhc1 {
> -+ u-boot,dm-spl;
> -+};
> -+
> -+&pinctrl_usdhc1_100mhz {
> -+ u-boot,dm-spl;
> -+};
> -+
> -+&pinctrl_usdhc1_200mhz {
> -+ u-boot,dm-spl;
> -+};
> -+
> -+&pinctrl_usdhc2 {
> -+ u-boot,dm-spl;
> -+};
> -+
> -+&pca9450 {
> -+ u-boot,dm-spl;
> -+};
> -+
> -+&{/soc@0/bus@30800000/i2c@30a20000/pmic@25/regulators} {
> -+ u-boot,dm-spl;
> -+};
> -+
> -+&ecspi1 {
> -+ u-boot,dm-spl;
> -+};
> -+
> -+&gpio1 {
> -+ u-boot,dm-spl;
> -+};
> -+
> -+&gpio2 {
> -+ u-boot,dm-spl;
> -+};
> -+
> -+&gpio3 {
> -+ u-boot,dm-spl;
> -+};
> -+
> -+&gpio4 {
> -+ u-boot,dm-spl;
> -+};
> -+
> -+&gpio5 {
> -+ u-boot,dm-spl;
> -+};
> -+
> -+&uart3 {
> -+ u-boot,dm-spl;
> -+ u-boot,dm-pre-reloc;
> -+};
> -+
> -+&usdhc1 {
> -+ u-boot,dm-spl;
> -+};
> -+
> -+&usdhc2 {
> -+ u-boot,dm-spl;
> -+};
> -+
> -+&wdog1 {
> -+ u-boot,dm-spl;
> -+};
> ---
> -2.30.2
> -
> diff --git a/configs/kontron_bl_imx8mm_defconfig b/configs/kontron_bl_imx8mm_defconfig
> index 2b7e121e252e..705222df2833 100644
> --- a/configs/kontron_bl_imx8mm_defconfig
> +++ b/configs/kontron_bl_imx8mm_defconfig
> @@ -3,8 +3,6 @@ BR2_aarch64=y
> BR2_cortex_a53=y
> BR2_ARM_FPU_VFPV3=y
>
> -BR2_GLOBAL_PATCH_DIR="board/kontron/bl-imx8mm/patches"
> -
> # System
> BR2_TARGET_GENERIC_GETTY_PORT="ttymxc2"
>
> @@ -40,7 +38,7 @@ BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="IMX_BOOT_UART_BASE=0x30880
> BR2_TARGET_UBOOT=y
> BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
> BR2_TARGET_UBOOT_CUSTOM_VERSION=y
> -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.01"
> +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.04"
> BR2_TARGET_UBOOT_BOARD_DEFCONFIG="kontron-sl-mx8mm"
> BR2_TARGET_UBOOT_NEEDS_DTC=y
> BR2_TARGET_UBOOT_NEEDS_PYTHON3=y
> --
> 2.25.1
>
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Buildroot] [PATCH] configs/kontron_bl_imx8mm_defconfig: Bump U-Boot
2022-04-22 6:02 ` Heiko Thiery
@ 2022-04-23 15:27 ` Arnout Vandecappelle
0 siblings, 0 replies; 4+ messages in thread
From: Arnout Vandecappelle @ 2022-04-23 15:27 UTC (permalink / raw)
To: Heiko Thiery, Fabio Estevam; +Cc: frieder.schrempf, buildroot
Hi Heiko,
On 22/04/2022 08:02, Heiko Thiery wrote:
> Hi Fabio,
>
> Am Do., 21. Apr. 2022 um 23:56 Uhr schrieb Fabio Estevam <festevam@gmail.com>:
>>
>> Bump U-Boot to version 2022.04 and remove the two patches
>> that have already been upstreamed.
>>
>> Signed-off-by: Fabio Estevam <festevam@gmail.com>
>
> Thanks for doing this.
>
> Acked-By: Heiko Thiery <heiko.thiery@gmail.com>
Did you also test it? We don't really want to change board configs in
non-trivial ways without testing that they still boot.
Regards,
Arnout
>
>> ---
>> Hi Heiko,
>>
>> This is not tested.
>>
>> Did it by inspection.
>>
>> ...m-kontron-n801x-s-convert-options-to.patch | 31 --
>> ...m-kontron-n801x-s-add-common-board-u.patch | 305 ------------------
>> configs/kontron_bl_imx8mm_defconfig | 4 +-
>> 3 files changed, 1 insertion(+), 339 deletions(-)
>> delete mode 100644 board/kontron/bl-imx8mm/patches/uboot/0001-imx-imx8mm-imx8mm-kontron-n801x-s-convert-options-to.patch
>> delete mode 100644 board/kontron/bl-imx8mm/patches/uboot/0002-imx-imx8mm-imx8mm-kontron-n801x-s-add-common-board-u.patch
>>
>> diff --git a/board/kontron/bl-imx8mm/patches/uboot/0001-imx-imx8mm-imx8mm-kontron-n801x-s-convert-options-to.patch b/board/kontron/bl-imx8mm/patches/uboot/0001-imx-imx8mm-imx8mm-kontron-n801x-s-convert-options-to.patch
>> deleted file mode 100644
>> index 6d76282defb2..000000000000
>> --- a/board/kontron/bl-imx8mm/patches/uboot/0001-imx-imx8mm-imx8mm-kontron-n801x-s-convert-options-to.patch
>> +++ /dev/null
>> @@ -1,31 +0,0 @@
>> -From 95a311af81cd47c44d3d6e3f717f06a06d8f3dfd Mon Sep 17 00:00:00 2001
>> -From: Heiko Thiery <heiko.thiery@gmail.com>
>> -Date: Mon, 10 Jan 2022 14:13:02 +0100
>> -Subject: [PATCH 1/2] imx: imx8mm: imx8mm-kontron-n801x-s: convert options to Kconfig
>> -
>> -CONFIG_SPL_MMC and CONFIG_SPL_SERIAL
>> -
>> -Patch submitted upstream:
>> -https://patchwork.ozlabs.org/project/uboot/patch/20220112085755.7396-1-heiko.thiery@gmail.com/
>> -
>> -Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
>> ----
>> - configs/kontron-sl-mx8mm_defconfig | 2 ++
>> - 1 file changed, 2 insertions(+)
>> -
>> -diff --git a/configs/kontron-sl-mx8mm_defconfig b/configs/kontron-sl-mx8mm_defconfig
>> -index 35d12fca32..940bf07a92 100644
>> ---- a/configs/kontron-sl-mx8mm_defconfig
>> -+++ b/configs/kontron-sl-mx8mm_defconfig
>> -@@ -15,6 +15,8 @@ CONFIG_SPL_DM_SPI=y
>> - CONFIG_DEFAULT_DEVICE_TREE="imx8mm-kontron-n801x-s"
>> - CONFIG_SPL_TEXT_BASE=0x7E1000
>> - CONFIG_TARGET_KONTRON_MX8MM=y
>> -+CONFIG_SPL_MMC=y
>> -+CONFIG_SPL_SERIAL=y
>> - CONFIG_BOOTCOUNT_BOOTLIMIT=3
>> - CONFIG_SPL=y
>> - CONFIG_DISTRO_DEFAULTS=y
>> ---
>> -2.30.2
>> -
>> diff --git a/board/kontron/bl-imx8mm/patches/uboot/0002-imx-imx8mm-imx8mm-kontron-n801x-s-add-common-board-u.patch b/board/kontron/bl-imx8mm/patches/uboot/0002-imx-imx8mm-imx8mm-kontron-n801x-s-add-common-board-u.patch
>> deleted file mode 100644
>> index a88d7aba870b..000000000000
>> --- a/board/kontron/bl-imx8mm/patches/uboot/0002-imx-imx8mm-imx8mm-kontron-n801x-s-add-common-board-u.patch
>> +++ /dev/null
>> @@ -1,305 +0,0 @@
>> -From ef694c19c074333fd16589ec6ffef3e7ca895186 Mon Sep 17 00:00:00 2001
>> -From: Heiko Thiery <heiko.thiery@gmail.com>
>> -Date: Wed, 12 Jan 2022 08:44:36 +0100
>> -Subject: [PATCH 2/2] imx: imx8mm: imx8mm-kontron-n801x-s: add common board
>> - u-boot.dtsi
>> -
>> -When using a board variant that selects the lvds specific dtb the
>> -*.u-boot.dtsi file will not be included. To have a lvds dtb specific
>> -u-boot.dtsi file move this part to a common board u-boot.dtsi file and
>> -include this in the board base u-boot.dtsi and create an additional one
>> -for the lvds variant.
>> -
>> -Patch submitted upstream:
>> -https://patchwork.ozlabs.org/project/uboot/patch/20220112085755.7396-2-heiko.thiery@gmail.com/
>> -
>> -Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
>> ----
>> - .../imx8mm-kontron-n801x-s-lvds-u-boot.dtsi | 6 +
>> - .../dts/imx8mm-kontron-n801x-s-u-boot.dtsi | 124 +----------------
>> - arch/arm/dts/imx8mm-kontron-n801x-u-boot.dtsi | 128 ++++++++++++++++++
>> - 3 files changed, 135 insertions(+), 123 deletions(-)
>> - create mode 100644 arch/arm/dts/imx8mm-kontron-n801x-s-lvds-u-boot.dtsi
>> - create mode 100644 arch/arm/dts/imx8mm-kontron-n801x-u-boot.dtsi
>> -
>> -diff --git a/arch/arm/dts/imx8mm-kontron-n801x-s-lvds-u-boot.dtsi b/arch/arm/dts/imx8mm-kontron-n801x-s-lvds-u-boot.dtsi
>> -new file mode 100644
>> -index 0000000000..4bf75722bf
>> ---- /dev/null
>> -+++ b/arch/arm/dts/imx8mm-kontron-n801x-s-lvds-u-boot.dtsi
>> -@@ -0,0 +1,6 @@
>> -+// SPDX-License-Identifier: GPL-2.0+
>> -+/*
>> -+ * Copyright (C) 2019 Kontron Electronics GmbH
>> -+ */
>> -+
>> -+#include "imx8mm-kontron-n801x-u-boot.dtsi"
>> -diff --git a/arch/arm/dts/imx8mm-kontron-n801x-s-u-boot.dtsi b/arch/arm/dts/imx8mm-kontron-n801x-s-u-boot.dtsi
>> -index 22d18e6f1c..4bf75722bf 100644
>> ---- a/arch/arm/dts/imx8mm-kontron-n801x-s-u-boot.dtsi
>> -+++ b/arch/arm/dts/imx8mm-kontron-n801x-s-u-boot.dtsi
>> -@@ -3,126 +3,4 @@
>> - * Copyright (C) 2019 Kontron Electronics GmbH
>> - */
>> -
>> --#include "imx8mm-u-boot.dtsi"
>> --
>> --/ {
>> -- aliases {
>> -- usb0 = &usbotg1;
>> -- usb1 = &usbotg2;
>> -- };
>> --
>> -- wdt-reboot {
>> -- compatible = "wdt-reboot";
>> -- wdt = <&wdog1>;
>> -- u-boot,dm-spl;
>> -- };
>> --
>> -- firmware {
>> -- optee {
>> -- compatible = "linaro,optee-tz";
>> -- method = "smc";
>> -- };
>> -- };
>> --};
>> --
>> --&fec1 {
>> -- phy-mode = "rgmii-rxid";
>> --};
>> --
>> --&i2c1 {
>> -- u-boot,dm-spl;
>> -- u-boot,dm-pre-reloc;
>> --};
>> --
>> --&i2c2 {
>> -- status = "okay";
>> -- u-boot,dm-spl;
>> -- u-boot,dm-pre-reloc;
>> --};
>> --
>> --&pinctrl_ecspi1 {
>> -- u-boot,dm-spl;
>> --};
>> --
>> --&pinctrl_i2c1 {
>> -- u-boot,dm-spl;
>> --};
>> --
>> --&pinctrl_pmic {
>> -- u-boot,dm-spl;
>> -- fsl,pins = <
>> -- MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x141
>> -- /* Disable Pullup for SD_VSEL */
>> -- MX8MM_IOMUXC_GPIO1_IO04_GPIO1_IO4 0x41
>> -- >;
>> --};
>> --
>> --&pinctrl_uart3 {
>> -- u-boot,dm-spl;
>> -- u-boot,dm-pre-reloc;
>> --};
>> --
>> --&pinctrl_usdhc1 {
>> -- u-boot,dm-spl;
>> --};
>> --
>> --&pinctrl_usdhc1_100mhz {
>> -- u-boot,dm-spl;
>> --};
>> --
>> --&pinctrl_usdhc1_200mhz {
>> -- u-boot,dm-spl;
>> --};
>> --
>> --&pinctrl_usdhc2 {
>> -- u-boot,dm-spl;
>> --};
>> --
>> --&pca9450 {
>> -- u-boot,dm-spl;
>> --};
>> --
>> --&{/soc@0/bus@30800000/i2c@30a20000/pmic@25/regulators} {
>> -- u-boot,dm-spl;
>> --};
>> --
>> --&ecspi1 {
>> -- u-boot,dm-spl;
>> --};
>> --
>> --&gpio1 {
>> -- u-boot,dm-spl;
>> --};
>> --
>> --&gpio2 {
>> -- u-boot,dm-spl;
>> --};
>> --
>> --&gpio3 {
>> -- u-boot,dm-spl;
>> --};
>> --
>> --&gpio4 {
>> -- u-boot,dm-spl;
>> --};
>> --
>> --&gpio5 {
>> -- u-boot,dm-spl;
>> --};
>> --
>> --&uart3 {
>> -- u-boot,dm-spl;
>> -- u-boot,dm-pre-reloc;
>> --};
>> --
>> --&usdhc1 {
>> -- u-boot,dm-spl;
>> --};
>> --
>> --&usdhc2 {
>> -- u-boot,dm-spl;
>> --};
>> --
>> --&wdog1 {
>> -- u-boot,dm-spl;
>> --};
>> -+#include "imx8mm-kontron-n801x-u-boot.dtsi"
>> -diff --git a/arch/arm/dts/imx8mm-kontron-n801x-u-boot.dtsi b/arch/arm/dts/imx8mm-kontron-n801x-u-boot.dtsi
>> -new file mode 100644
>> -index 0000000000..22d18e6f1c
>> ---- /dev/null
>> -+++ b/arch/arm/dts/imx8mm-kontron-n801x-u-boot.dtsi
>> -@@ -0,0 +1,128 @@
>> -+// SPDX-License-Identifier: GPL-2.0+
>> -+/*
>> -+ * Copyright (C) 2019 Kontron Electronics GmbH
>> -+ */
>> -+
>> -+#include "imx8mm-u-boot.dtsi"
>> -+
>> -+/ {
>> -+ aliases {
>> -+ usb0 = &usbotg1;
>> -+ usb1 = &usbotg2;
>> -+ };
>> -+
>> -+ wdt-reboot {
>> -+ compatible = "wdt-reboot";
>> -+ wdt = <&wdog1>;
>> -+ u-boot,dm-spl;
>> -+ };
>> -+
>> -+ firmware {
>> -+ optee {
>> -+ compatible = "linaro,optee-tz";
>> -+ method = "smc";
>> -+ };
>> -+ };
>> -+};
>> -+
>> -+&fec1 {
>> -+ phy-mode = "rgmii-rxid";
>> -+};
>> -+
>> -+&i2c1 {
>> -+ u-boot,dm-spl;
>> -+ u-boot,dm-pre-reloc;
>> -+};
>> -+
>> -+&i2c2 {
>> -+ status = "okay";
>> -+ u-boot,dm-spl;
>> -+ u-boot,dm-pre-reloc;
>> -+};
>> -+
>> -+&pinctrl_ecspi1 {
>> -+ u-boot,dm-spl;
>> -+};
>> -+
>> -+&pinctrl_i2c1 {
>> -+ u-boot,dm-spl;
>> -+};
>> -+
>> -+&pinctrl_pmic {
>> -+ u-boot,dm-spl;
>> -+ fsl,pins = <
>> -+ MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x141
>> -+ /* Disable Pullup for SD_VSEL */
>> -+ MX8MM_IOMUXC_GPIO1_IO04_GPIO1_IO4 0x41
>> -+ >;
>> -+};
>> -+
>> -+&pinctrl_uart3 {
>> -+ u-boot,dm-spl;
>> -+ u-boot,dm-pre-reloc;
>> -+};
>> -+
>> -+&pinctrl_usdhc1 {
>> -+ u-boot,dm-spl;
>> -+};
>> -+
>> -+&pinctrl_usdhc1_100mhz {
>> -+ u-boot,dm-spl;
>> -+};
>> -+
>> -+&pinctrl_usdhc1_200mhz {
>> -+ u-boot,dm-spl;
>> -+};
>> -+
>> -+&pinctrl_usdhc2 {
>> -+ u-boot,dm-spl;
>> -+};
>> -+
>> -+&pca9450 {
>> -+ u-boot,dm-spl;
>> -+};
>> -+
>> -+&{/soc@0/bus@30800000/i2c@30a20000/pmic@25/regulators} {
>> -+ u-boot,dm-spl;
>> -+};
>> -+
>> -+&ecspi1 {
>> -+ u-boot,dm-spl;
>> -+};
>> -+
>> -+&gpio1 {
>> -+ u-boot,dm-spl;
>> -+};
>> -+
>> -+&gpio2 {
>> -+ u-boot,dm-spl;
>> -+};
>> -+
>> -+&gpio3 {
>> -+ u-boot,dm-spl;
>> -+};
>> -+
>> -+&gpio4 {
>> -+ u-boot,dm-spl;
>> -+};
>> -+
>> -+&gpio5 {
>> -+ u-boot,dm-spl;
>> -+};
>> -+
>> -+&uart3 {
>> -+ u-boot,dm-spl;
>> -+ u-boot,dm-pre-reloc;
>> -+};
>> -+
>> -+&usdhc1 {
>> -+ u-boot,dm-spl;
>> -+};
>> -+
>> -+&usdhc2 {
>> -+ u-boot,dm-spl;
>> -+};
>> -+
>> -+&wdog1 {
>> -+ u-boot,dm-spl;
>> -+};
>> ---
>> -2.30.2
>> -
>> diff --git a/configs/kontron_bl_imx8mm_defconfig b/configs/kontron_bl_imx8mm_defconfig
>> index 2b7e121e252e..705222df2833 100644
>> --- a/configs/kontron_bl_imx8mm_defconfig
>> +++ b/configs/kontron_bl_imx8mm_defconfig
>> @@ -3,8 +3,6 @@ BR2_aarch64=y
>> BR2_cortex_a53=y
>> BR2_ARM_FPU_VFPV3=y
>>
>> -BR2_GLOBAL_PATCH_DIR="board/kontron/bl-imx8mm/patches"
>> -
>> # System
>> BR2_TARGET_GENERIC_GETTY_PORT="ttymxc2"
>>
>> @@ -40,7 +38,7 @@ BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="IMX_BOOT_UART_BASE=0x30880
>> BR2_TARGET_UBOOT=y
>> BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
>> BR2_TARGET_UBOOT_CUSTOM_VERSION=y
>> -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.01"
>> +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.04"
>> BR2_TARGET_UBOOT_BOARD_DEFCONFIG="kontron-sl-mx8mm"
>> BR2_TARGET_UBOOT_NEEDS_DTC=y
>> BR2_TARGET_UBOOT_NEEDS_PYTHON3=y
>> --
>> 2.25.1
>>
> _______________________________________________
> buildroot mailing list
> buildroot@buildroot.org
> https://lists.buildroot.org/mailman/listinfo/buildroot
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Buildroot] [PATCH] configs/kontron_bl_imx8mm_defconfig: Bump U-Boot
2022-04-21 21:56 [Buildroot] [PATCH] configs/kontron_bl_imx8mm_defconfig: Bump U-Boot Fabio Estevam
2022-04-22 6:02 ` Heiko Thiery
@ 2022-07-26 13:14 ` Thomas Petazzoni via buildroot
1 sibling, 0 replies; 4+ messages in thread
From: Thomas Petazzoni via buildroot @ 2022-07-26 13:14 UTC (permalink / raw)
To: Fabio Estevam; +Cc: heiko.thiery, frieder.schrempf, buildroot
On Thu, 21 Apr 2022 18:56:11 -0300
Fabio Estevam <festevam@gmail.com> wrote:
> Bump U-Boot to version 2022.04 and remove the two patches
> that have already been upstreamed.
>
> Signed-off-by: Fabio Estevam <festevam@gmail.com>
> ---
> Hi Heiko,
Applied to master, thanks.
Thomas
--
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2022-07-26 13:14 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2022-04-21 21:56 [Buildroot] [PATCH] configs/kontron_bl_imx8mm_defconfig: Bump U-Boot Fabio Estevam
2022-04-22 6:02 ` Heiko Thiery
2022-04-23 15:27 ` Arnout Vandecappelle
2022-07-26 13:14 ` Thomas Petazzoni via buildroot
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.