All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rob Herring <robh@kernel.org>
To: Liu Ying <victor.liu@nxp.com>
Cc: gregkh@linuxfoundation.org, s.hauer@pengutronix.de,
	devicetree@vger.kernel.org, geert+renesas@glider.be,
	kernel@pengutronix.de, linux-arm-kernel@lists.infradead.org,
	krzysztof.kozlowski+dt@linaro.org, saravanak@google.com,
	linux-imx@nxp.com, linux-kernel@vger.kernel.org,
	festevam@gmail.com, krzysztof.kozlowski@linaro.org,
	robh+dt@kernel.org, shawnguo@kernel.org
Subject: Re: [PATCH RESEND v4 2/2] dt-bindings: bus: Add Freescale i.MX8qxp pixel link MSI bus binding
Date: Thu, 25 Aug 2022 16:17:54 -0500	[thread overview]
Message-ID: <20220825211754.GA1704113-robh@kernel.org> (raw)
In-Reply-To: <20220822060323.3481384-3-victor.liu@nxp.com>

On Mon, 22 Aug 2022 14:03:23 +0800, Liu Ying wrote:
> Freescale i.MX8qxp pixel link MSI bus is a simple memory-mapped bus.
> It is used to access peripherals in i.MX8qm/qxp imaging, LVDS, MIPI
> DSI and HDMI TX subsystems, like I2C controller, PWM controller,
> MIPI DSI controller and Control and Status Registers (CSR) module.
> 
> Reference simple-pm-bus bindings and add Freescale i.MX8qxp pixel
> link MSI bus specific bindings.
> 
> Signed-off-by: Liu Ying <victor.liu@nxp.com>
> ---
> v3->v4:
> * Add child nodes in the example MSI bus node of the MSI bus dt-binding. (Krzysztof)
> * Resend v4 to imply this patch is based on v6.0-rc1 so that there are not any
>   dependencies. (Rob)
> 
> v2->v3:
> * Add a pattern property to allow child nodes. (Rob)
> 
> v1->v2:
> Address Krzysztof's comments:
> * Add a select to explicitly select the MSI bus dt-binding.
> * List 'simple-pm-bus' explicitly as one item of compatible strings.
> * Require compatible and reg properties.
> * Put reg property just after compatible property in example.
> 
>  .../bus/fsl,imx8qxp-pixel-link-msi-bus.yaml   | 232 ++++++++++++++++++
>  1 file changed, 232 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/bus/fsl,imx8qxp-pixel-link-msi-bus.yaml
> 

Reviewed-by: Rob Herring <robh@kernel.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Rob Herring <robh@kernel.org>
To: Liu Ying <victor.liu@nxp.com>
Cc: gregkh@linuxfoundation.org, s.hauer@pengutronix.de,
	devicetree@vger.kernel.org, geert+renesas@glider.be,
	kernel@pengutronix.de, linux-arm-kernel@lists.infradead.org,
	krzysztof.kozlowski+dt@linaro.org, saravanak@google.com,
	linux-imx@nxp.com, linux-kernel@vger.kernel.org,
	festevam@gmail.com, krzysztof.kozlowski@linaro.org,
	robh+dt@kernel.org, shawnguo@kernel.org
Subject: Re: [PATCH RESEND v4 2/2] dt-bindings: bus: Add Freescale i.MX8qxp pixel link MSI bus binding
Date: Thu, 25 Aug 2022 16:17:54 -0500	[thread overview]
Message-ID: <20220825211754.GA1704113-robh@kernel.org> (raw)
In-Reply-To: <20220822060323.3481384-3-victor.liu@nxp.com>

On Mon, 22 Aug 2022 14:03:23 +0800, Liu Ying wrote:
> Freescale i.MX8qxp pixel link MSI bus is a simple memory-mapped bus.
> It is used to access peripherals in i.MX8qm/qxp imaging, LVDS, MIPI
> DSI and HDMI TX subsystems, like I2C controller, PWM controller,
> MIPI DSI controller and Control and Status Registers (CSR) module.
> 
> Reference simple-pm-bus bindings and add Freescale i.MX8qxp pixel
> link MSI bus specific bindings.
> 
> Signed-off-by: Liu Ying <victor.liu@nxp.com>
> ---
> v3->v4:
> * Add child nodes in the example MSI bus node of the MSI bus dt-binding. (Krzysztof)
> * Resend v4 to imply this patch is based on v6.0-rc1 so that there are not any
>   dependencies. (Rob)
> 
> v2->v3:
> * Add a pattern property to allow child nodes. (Rob)
> 
> v1->v2:
> Address Krzysztof's comments:
> * Add a select to explicitly select the MSI bus dt-binding.
> * List 'simple-pm-bus' explicitly as one item of compatible strings.
> * Require compatible and reg properties.
> * Put reg property just after compatible property in example.
> 
>  .../bus/fsl,imx8qxp-pixel-link-msi-bus.yaml   | 232 ++++++++++++++++++
>  1 file changed, 232 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/bus/fsl,imx8qxp-pixel-link-msi-bus.yaml
> 

Reviewed-by: Rob Herring <robh@kernel.org>

  reply	other threads:[~2022-08-25 21:19 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-08-22  6:03 [PATCH RESEND v4 0/2] drivers: bus: Add Freescale i.MX8qxp pixel link MSI bus support Liu Ying
2022-08-22  6:03 ` Liu Ying
2022-08-22  6:03 ` [PATCH RESEND v4 1/2] drivers: bus: simple-pm-bus: Use clocks Liu Ying
2022-08-22  6:03   ` Liu Ying
2022-08-22  6:03 ` [PATCH RESEND v4 2/2] dt-bindings: bus: Add Freescale i.MX8qxp pixel link MSI bus binding Liu Ying
2022-08-22  6:03   ` Liu Ying
2022-08-25 21:17   ` Rob Herring [this message]
2022-08-25 21:17     ` Rob Herring
2022-10-06  3:18 ` [PATCH RESEND v4 0/2] drivers: bus: Add Freescale i.MX8qxp pixel link MSI bus support Liu Ying
2022-10-06  3:18   ` Liu Ying
2022-10-06  6:14   ` Greg KH
2022-10-06  6:14     ` Greg KH

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220825211754.GA1704113-robh@kernel.org \
    --to=robh@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=geert+renesas@glider.be \
    --cc=gregkh@linuxfoundation.org \
    --cc=kernel@pengutronix.de \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=krzysztof.kozlowski@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=saravanak@google.com \
    --cc=shawnguo@kernel.org \
    --cc=victor.liu@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.