[Buildroot] [for-master 1/2] package/glibc: glibc on or1k needs a toolchain w/ headers >= 5.4

[Buildroot] [for-master 1/2] package/glibc: glibc on or1k needs a toolchain w/ headers >= 5.4

[Romain Naour]

Commit [1] enabled glibc on or1k since it's now supported but it
requires a toolchain with linux-headers >= 5.4.

From [2]:
"Here we define the minumum linux kernel version at 5.4.0, as that is the
long term support version where 32-bit architectures start to support
64-bit time API's.  The OpenRISC kernel had some bugs up until version 5.8
which caused issues with glibc fork/clone, they have been backported to
5.4 but not previous versions."

Fixes:

  checking installed Linux kernel header files... 3.2.0 or later
  checking for kernel header at least 5.4.0... too old!
  configure: error: *** The available kernel headers are older than the requested

https://gitlab.com/buildroot.org/toolchains-builder/-/jobs/2875256686

[1] 68d0aede597d32816c5b2ff32de0ce33cc14eb93
[2] https://sourceware.org/git/?p=glibc.git;a=commitdiff;h=0c3c62ca7d9ff3bdacdd13e636bc858101e3e288

Signed-off-by: Romain Naour <romain.naour@gmail.com>
---
 package/glibc/Config.in                 | 1 +
 toolchain/toolchain-buildroot/Config.in | 4 ++++
 2 files changed, 5 insertions(+)

diff --git a/package/glibc/Config.in b/package/glibc/Config.in
index 23cbfcd9aa..ba9f691d80 100644
--- a/package/glibc/Config.in
+++ b/package/glibc/Config.in
@@ -36,6 +36,7 @@ config BR2_PACKAGE_GLIBC_SUPPORTS
 	depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_5 || !BR2_MIPS_NAN_2008
 	depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_0 || !BR2_RISCV_64
 	depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_1 || !BR2_arc
+	depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_4 || !BR2_or1k
 
 if BR2_TOOLCHAIN_BUILDROOT_GLIBC
 
diff --git a/toolchain/toolchain-buildroot/Config.in b/toolchain/toolchain-buildroot/Config.in
index 836af3b22a..154cf69ef1 100644
--- a/toolchain/toolchain-buildroot/Config.in
+++ b/toolchain/toolchain-buildroot/Config.in
@@ -67,6 +67,10 @@ comment "glibc on ARC needs a toolchain w/ headers >= 5.1"
 	depends on BR2_arc
 	depends on !BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_1
 
+comment "glibc on or1k needs a toolchain w/ headers >= 5.4"
+	depends on BR2_or1k
+	depends on !BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_4
+
 config BR2_TOOLCHAIN_BUILDROOT_MUSL
 	bool "musl"
 	depends on BR2_PACKAGE_MUSL_SUPPORTS
-- 
2.37.1

_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot

[Buildroot] [for-master 2/2] package/gdb: prevent gdbserver being selected for or1k builds

[Romain Naour]

There is currently no version of gdbserver for or1k. Until this
is implemented we will prevent both the direct and indirect
selection of gdbserver for or1k builds. In practice this means
that 'cross gdb for the host' cannot be selected and that
'full debugger' must be automatically selected for the gdb target
package

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Stafford Horne <shorne@gmail.com>
---
gdbserver for or1k requires gdb 12.1 [1] but this version is
not available in Buildroot 2022.08 and only in the next branch
(upcoming 2022.011).

[1] https://sourceware.org/git/?p=binutils-gdb.git;a=commitdiff;h=4933265c3f71b9134363d0c05f09542d5cc677f4
---
 package/gdb/Config.in      | 3 +++
 package/gdb/Config.in.host | 1 +
 2 files changed, 4 insertions(+)

diff --git a/package/gdb/Config.in b/package/gdb/Config.in
index 71fa6f6064..8fd5eb9fbc 100644
--- a/package/gdb/Config.in
+++ b/package/gdb/Config.in
@@ -17,6 +17,8 @@ config BR2_PACKAGE_GDB
 	depends on BR2_PACKAGE_GDB_ARCH_SUPPORTS
 	depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_8
 	depends on BR2_INSTALL_LIBSTDCPP
+	# no gdbserver on or1k
+	select BR2_PACKAGE_GDB_DEBUGGER if BR2_or1k
 	# When the external toolchain gdbserver is copied to the
 	# target, we don't allow building a separate gdbserver. The
 	# one from the external toolchain should be used.
@@ -43,6 +45,7 @@ if BR2_PACKAGE_GDB
 config BR2_PACKAGE_GDB_SERVER
 	bool "gdbserver"
 	depends on !BR2_TOOLCHAIN_EXTERNAL_GDB_SERVER_COPY
+	depends on !BR2_or1k
 	help
 	  Build the gdbserver stub to run on the target.
 	  A full gdb is needed to debug the progam.
diff --git a/package/gdb/Config.in.host b/package/gdb/Config.in.host
index a294103ca3..15d5f52a36 100644
--- a/package/gdb/Config.in.host
+++ b/package/gdb/Config.in.host
@@ -3,6 +3,7 @@ config BR2_PACKAGE_HOST_GDB_ARCH_SUPPORTS
 	default y
 	depends on !((BR2_arm || BR2_armeb) && BR2_BINFMT_FLAT)
 	depends on !BR2_microblaze
+	depends on !BR2_or1k
 
 comment "Host GDB Options"
 	depends on !BR2_TOOLCHAIN_EXTERNAL_GDB_SERVER_COPY
-- 
2.37.1

_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot

Re: [Buildroot] [for-master 2/2] package/gdb: prevent gdbserver being selected for or1k builds

[Thomas Petazzoni via buildroot]

Hello Romain,

On Sat, 27 Aug 2022 18:14:31 +0200
Romain Naour <romain.naour@gmail.com> wrote:

> There is currently no version of gdbserver for or1k. Until this
> is implemented we will prevent both the direct and indirect
> selection of gdbserver for or1k builds. In practice this means
> that 'cross gdb for the host' cannot be selected and that
> 'full debugger' must be automatically selected for the gdb target
> package
> 
> Signed-off-by: Romain Naour <romain.naour@gmail.com>
> Cc: Stafford Horne <shorne@gmail.com>
> ---
> gdbserver for or1k requires gdb 12.1 [1] but this version is
> not available in Buildroot 2022.08 and only in the next branch
> (upcoming 2022.011).

But in:

commit 991b7b990ad8cd4a37564cd91d5bb0ee7e1e9f11
Author: Stafford Horne <shorne@gmail.com>
Date:   Sat Jul 30 07:07:48 2022 +0900

    package/gdb: Enable OpenRISC GDB support
    
    The OpenRiSC gdb port has supported native debugging since version 8.3
    and remote debugging since before that.  So it is now safe to enabled
    this.
    
    This patch removes the conditions blocking gdb from being built on or1k
    architecture builds.
    
    Signed-off-by: Stafford Horne <shorne@gmail.com>
    Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

Stafford said that "remote debugging" works.

So, what is correct? :-)

Thomas
-- 
Thomas Petazzoni, co-owner and CEO, Bootlin
Embedded Linux and Kernel engineering and training
https://bootlin.com
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot

Re: [Buildroot] [for-master 2/2] package/gdb: prevent gdbserver being selected for or1k builds

[Romain Naour]

Hello Thomas,

Le 29/08/2022 à 15:46, Thomas Petazzoni a écrit :
> Hello Romain,
> 
> On Sat, 27 Aug 2022 18:14:31 +0200
> Romain Naour <romain.naour@gmail.com> wrote:
> 
>> There is currently no version of gdbserver for or1k. Until this
>> is implemented we will prevent both the direct and indirect
>> selection of gdbserver for or1k builds. In practice this means
>> that 'cross gdb for the host' cannot be selected and that
>> 'full debugger' must be automatically selected for the gdb target
>> package
>>
>> Signed-off-by: Romain Naour <romain.naour@gmail.com>
>> Cc: Stafford Horne <shorne@gmail.com>
>> ---
>> gdbserver for or1k requires gdb 12.1 [1] but this version is
>> not available in Buildroot 2022.08 and only in the next branch
>> (upcoming 2022.011).
> 
> But in:
> 
> commit 991b7b990ad8cd4a37564cd91d5bb0ee7e1e9f11
> Author: Stafford Horne <shorne@gmail.com>
> Date:   Sat Jul 30 07:07:48 2022 +0900
> 
>     package/gdb: Enable OpenRISC GDB support
>     
>     The OpenRiSC gdb port has supported native debugging since version 8.3
>     and remote debugging since before that.  So it is now safe to enabled
>     this.
>     
>     This patch removes the conditions blocking gdb from being built on or1k
>     architecture builds.
>     
>     Signed-off-by: Stafford Horne <shorne@gmail.com>
>     Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
> 
> Stafford said that "remote debugging" works.

I'm not sure about "remote debugging" but the commit I'm referring is titled
"gdb: or1k: implement gdb server"

I noticed that or1k entry is missing in gdbserver/configure.srv until gdb 12.

> 
> So, what is correct? :-)

I guess git has the answer:

$ git tag --contains 4933265c3f71b9134363d0c05f09542d5cc677f4
binutils-2_38
binutils-2_39
gdb-12-branchpoint
gdb-12.1-release

Best regards,
Romain

> 
> Thomas

_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot

Re: [Buildroot] [for-master 2/2] package/gdb: prevent gdbserver being selected for or1k builds

[Arnout Vandecappelle]

On 27/08/2022 18:14, Romain Naour wrote:
> There is currently no version of gdbserver for or1k. Until this
> is implemented we will prevent both the direct and indirect
> selection of gdbserver for or1k builds. In practice this means
> that 'cross gdb for the host' cannot be selected and that
> 'full debugger' must be automatically selected for the gdb target
> package
> 
> Signed-off-by: Romain Naour <romain.naour@gmail.com>
> Cc: Stafford Horne <shorne@gmail.com>

  Applied to master, thanks, after extending the commit message with:

     This partially reverts commit 991b7b990ad8cd4a37564cd91d5bb0ee7e1e9f11
     which claimed that gdbserver for or1k was already supported before
     version 8.3. That is not true - the commit that adds gdbserver support
     for or1k [1] was only merged for version 12.1, which hasn't been
     integrated in Buildroot yet.

     Without that support, the build of gdbserver fails with

 
/home/buildroot/autobuild/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/or1k-buildroot-linux-musl/11.2.0/../../../../or1k-buildroot-linux-musl/bin/ld: 
server.o: in function `main':
     server.cc:(.text.startup+0x6dc): undefined reference to `initialize_low()'
 
/home/buildroot/autobuild/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/or1k-buildroot-linux-musl/11.2.0/../../../../or1k-buildroot-linux-musl/bin/ld: 
remote-utils.o: in function `prepare_resume_reply(char*, ptid_t, 
target_waitstatus*)':
     remote-utils.cc:(.text+0x28a8): undefined reference to `using_threads'
 
/home/buildroot/autobuild/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/or1k-buildroot-linux-musl/11.2.0/../../../../or1k-buildroot-linux-musl/bin/ld: 
remote-utils.cc:(.text+0x28b0): undefined reference to `using_threads'

     Fixes: 
http://autobuild.buildroot.net/results/b3c/b3c0df53d09d9facaf0c3c2bc4529f9fcf7737ee

     [1] 
https://sourceware.org/git/?p=binutils-gdb.git;a=commitdiff;h=4933265c3f71b9134363d0c05f09542d5cc677f4


  Regards,
  Arnout

> ---
> gdbserver for or1k requires gdb 12.1 [1] but this version is
> not available in Buildroot 2022.08 and only in the next branch
> (upcoming 2022.011).
> 
> [1] https://sourceware.org/git/?p=binutils-gdb.git;a=commitdiff;h=4933265c3f71b9134363d0c05f09542d5cc677f4
> ---
>   package/gdb/Config.in      | 3 +++
>   package/gdb/Config.in.host | 1 +
>   2 files changed, 4 insertions(+)
> 
> diff --git a/package/gdb/Config.in b/package/gdb/Config.in
> index 71fa6f6064..8fd5eb9fbc 100644
> --- a/package/gdb/Config.in
> +++ b/package/gdb/Config.in
> @@ -17,6 +17,8 @@ config BR2_PACKAGE_GDB
>   	depends on BR2_PACKAGE_GDB_ARCH_SUPPORTS
>   	depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_8
>   	depends on BR2_INSTALL_LIBSTDCPP
> +	# no gdbserver on or1k
> +	select BR2_PACKAGE_GDB_DEBUGGER if BR2_or1k
>   	# When the external toolchain gdbserver is copied to the
>   	# target, we don't allow building a separate gdbserver. The
>   	# one from the external toolchain should be used.
> @@ -43,6 +45,7 @@ if BR2_PACKAGE_GDB
>   config BR2_PACKAGE_GDB_SERVER
>   	bool "gdbserver"
>   	depends on !BR2_TOOLCHAIN_EXTERNAL_GDB_SERVER_COPY
> +	depends on !BR2_or1k
>   	help
>   	  Build the gdbserver stub to run on the target.
>   	  A full gdb is needed to debug the progam.
> diff --git a/package/gdb/Config.in.host b/package/gdb/Config.in.host
> index a294103ca3..15d5f52a36 100644
> --- a/package/gdb/Config.in.host
> +++ b/package/gdb/Config.in.host
> @@ -3,6 +3,7 @@ config BR2_PACKAGE_HOST_GDB_ARCH_SUPPORTS
>   	default y
>   	depends on !((BR2_arm || BR2_armeb) && BR2_BINFMT_FLAT)
>   	depends on !BR2_microblaze
> +	depends on !BR2_or1k
>   
>   comment "Host GDB Options"
>   	depends on !BR2_TOOLCHAIN_EXTERNAL_GDB_SERVER_COPY
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot

Re: [Buildroot] [for-master 1/2] package/glibc: glibc on or1k needs a toolchain w/ headers >= 5.4

[Arnout Vandecappelle]

On 27/08/2022 18:14, Romain Naour wrote:
> Commit [1] enabled glibc on or1k since it's now supported but it
> requires a toolchain with linux-headers >= 5.4.
> 
>  From [2]:
> "Here we define the minumum linux kernel version at 5.4.0, as that is the
> long term support version where 32-bit architectures start to support
> 64-bit time API's.  The OpenRISC kernel had some bugs up until version 5.8
> which caused issues with glibc fork/clone, they have been backported to
> 5.4 but not previous versions."
> 
> Fixes:
> 
>    checking installed Linux kernel header files... 3.2.0 or later
>    checking for kernel header at least 5.4.0... too old!
>    configure: error: *** The available kernel headers are older than the requested
> 
> https://gitlab.com/buildroot.org/toolchains-builder/-/jobs/2875256686
> 
> [1] 68d0aede597d32816c5b2ff32de0ce33cc14eb93
> [2] https://sourceware.org/git/?p=glibc.git;a=commitdiff;h=0c3c62ca7d9ff3bdacdd13e636bc858101e3e288
> 
> Signed-off-by: Romain Naour <romain.naour@gmail.com>

  Applied to master, thanks.

  Regards,
  Arnout

> ---
>   package/glibc/Config.in                 | 1 +
>   toolchain/toolchain-buildroot/Config.in | 4 ++++
>   2 files changed, 5 insertions(+)
> 
> diff --git a/package/glibc/Config.in b/package/glibc/Config.in
> index 23cbfcd9aa..ba9f691d80 100644
> --- a/package/glibc/Config.in
> +++ b/package/glibc/Config.in
> @@ -36,6 +36,7 @@ config BR2_PACKAGE_GLIBC_SUPPORTS
>   	depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_5 || !BR2_MIPS_NAN_2008
>   	depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_0 || !BR2_RISCV_64
>   	depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_1 || !BR2_arc
> +	depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_4 || !BR2_or1k
>   
>   if BR2_TOOLCHAIN_BUILDROOT_GLIBC
>   
> diff --git a/toolchain/toolchain-buildroot/Config.in b/toolchain/toolchain-buildroot/Config.in
> index 836af3b22a..154cf69ef1 100644
> --- a/toolchain/toolchain-buildroot/Config.in
> +++ b/toolchain/toolchain-buildroot/Config.in
> @@ -67,6 +67,10 @@ comment "glibc on ARC needs a toolchain w/ headers >= 5.1"
>   	depends on BR2_arc
>   	depends on !BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_1
>   
> +comment "glibc on or1k needs a toolchain w/ headers >= 5.4"
> +	depends on BR2_or1k
> +	depends on !BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_4
> +
>   config BR2_TOOLCHAIN_BUILDROOT_MUSL
>   	bool "musl"
>   	depends on BR2_PACKAGE_MUSL_SUPPORTS
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot

Re: [Buildroot] [for-master 1/2] package/glibc: glibc on or1k needs a toolchain w/ headers >= 5.4

[Peter Korsgaard]

>>>>> "Romain" == Romain Naour <romain.naour@gmail.com> writes:

 > Commit [1] enabled glibc on or1k since it's now supported but it
 > requires a toolchain with linux-headers >= 5.4.

 > From [2]:
 > "Here we define the minumum linux kernel version at 5.4.0, as that is the
 > long term support version where 32-bit architectures start to support
 > 64-bit time API's.  The OpenRISC kernel had some bugs up until version 5.8
 > which caused issues with glibc fork/clone, they have been backported to
 > 5.4 but not previous versions."

 > Fixes:

 >   checking installed Linux kernel header files... 3.2.0 or later
 >   checking for kernel header at least 5.4.0... too old!
 >   configure: error: *** The available kernel headers are older than the requested

 > https://gitlab.com/buildroot.org/toolchains-builder/-/jobs/2875256686

 > [1] 68d0aede597d32816c5b2ff32de0ce33cc14eb93
 > [2] https://sourceware.org/git/?p=glibc.git;a=commitdiff;h=0c3c62ca7d9ff3bdacdd13e636bc858101e3e288

 > Signed-off-by: Romain Naour <romain.naour@gmail.com>

Committed to 2022.05.x, thanks.

-- 
Bye, Peter Korsgaard
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot