#yocto #dunfell #qemux86-64

#yocto #dunfell #qemux86-64

[Monsees, Steven C (US)]

[-- Attachment #1: Type: text/plain, Size: 2644 bytes --]


Hello:

I am attempting to evaluate dunfell -23.0.17, on a cetos7 linux box.

When building the default : core-image-minimal or core-image-sato, clean with no errors/warnings, on execution
I get the following error for both (see below)...


(1)    Is this an issue with the release ?,  and is there another release I should be using ?

(2)    Is there something I need to pre-configure for these builds to run properly ?

(3)    How might I resolve this issue ?

06:57 smonsees@yix490016 /disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dunfell_Min>runqemu qemux86-64
runqemu - INFO - Running MACHINE=qemux86-64 bitbake -e ...
runqemu - INFO - Continuing with the following parameters:
KERNEL: [/disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dunfell_Min/tmp/deploy/images/qemux86-64/bzImage--5.4.192+gitAUTOINC+3fecb08507_85f0668fea-r0-qemux86-64-20220830151817.bin]
MACHINE: [qemux86-64]
FSTYPE: [ext4]
ROOTFS: [/disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dunfell_Min/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64-20220830151817.rootfs.ext4]
CONFFILE: [/disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dunfell_Min/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64-20220830151817.qemuboot.conf]

runqemu - INFO - Setting up tap interface under sudo
[sudo] password for smonsees:
runqemu - INFO - Network configuration: ip=192.168.7.2::192.168.7.1:255.255.255.0
runqemu - INFO - Running /disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dunfell_Min/tmp/work/x86_64-linux/qemu-helper-native/1.0-r1/recipe-sysroot-native/usr/bin/qemu-system-x86_64 -device virtio-net-pci,netdev=net0,mac=52:54:00:12:34:02 -netdev tap,id=net0,ifname=tap0,script=no,downscript=no -drive file=/disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dunfell_Min/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64-20220830151817.rootfs.ext4,if=virtio,format=raw -show-cursor -usb -device usb-tablet -object rng-random,filename=/dev/urandom,id=rng0 -device virtio-rng-pci,rng=rng0   -cpu core2duo -m 256 -serial mon:vc -serial null -kernel /disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dunfell_Min/tmp/deploy/images/qemux86-64/bzImage--5.4.192+gitAUTOINC+3fecb08507_85f0668fea-r0-qemux86-64-20220830151817.bin -append 'root=/dev/vda rw  mem=256M ip=192.168.7.2::192.168.7.1:255.255.255.0 oprofile.timer=1 '

runqemu - ERROR - Failed to run qemu: Could not initialize SDL(x11 not available) - exiting

runqemu - INFO - Cleaning up
Set 'tap0' nonpersistent

Thank you for your help,
Steve


[-- Attachment #2: Type: text/html, Size: 7890 bytes --]