[PATCH 0/4] mfd/phy/remoteproc: dt-bindings: syscon: be specific

[PATCH 0/4] mfd/phy/remoteproc: dt-bindings: syscon: be specific

[Krzysztof Kozlowski]

Hi,

The last MFD/syscon patch depends on the previous ones to avoid
dt_binding_check warnings.

I propose to take entire set via Rob's DT tree.

Best regards,
Krzysztof

Krzysztof Kozlowski (4):
  dt-bindings: phy: hisilicon,hi3660-usb3: simplify example
  dt-bindings: phy: hisilicon,hi3670-usb3: simplify example
  dt-bindings: remoteproc: qcom,pil-info: add missing imem compatible
  dt-bindings: mfd: syscon: require specific compatible also for
    simple-mfd

 .../devicetree/bindings/mfd/syscon.yaml       | 14 +++++++++-
 .../bindings/phy/hisilicon,hi3660-usb3.yaml   | 22 +++++-----------
 .../bindings/phy/hisilicon,hi3670-usb3.yaml   | 26 ++++++-------------
 .../bindings/remoteproc/qcom,pil-info.yaml    |  2 +-
 4 files changed, 28 insertions(+), 36 deletions(-)

-- 
2.34.1

[PATCH 0/4] mfd/phy/remoteproc: dt-bindings: syscon: be specific

[Krzysztof Kozlowski]

Hi,

The last MFD/syscon patch depends on the previous ones to avoid
dt_binding_check warnings.

I propose to take entire set via Rob's DT tree.

Best regards,
Krzysztof

Krzysztof Kozlowski (4):
  dt-bindings: phy: hisilicon,hi3660-usb3: simplify example
  dt-bindings: phy: hisilicon,hi3670-usb3: simplify example
  dt-bindings: remoteproc: qcom,pil-info: add missing imem compatible
  dt-bindings: mfd: syscon: require specific compatible also for
    simple-mfd

 .../devicetree/bindings/mfd/syscon.yaml       | 14 +++++++++-
 .../bindings/phy/hisilicon,hi3660-usb3.yaml   | 22 +++++-----------
 .../bindings/phy/hisilicon,hi3670-usb3.yaml   | 26 ++++++-------------
 .../bindings/remoteproc/qcom,pil-info.yaml    |  2 +-
 4 files changed, 28 insertions(+), 36 deletions(-)

-- 
2.34.1


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH 1/4] dt-bindings: phy: hisilicon,hi3660-usb3: simplify example

[Krzysztof Kozlowski]

syscon and simple-mfd cannot be used without device specific compatible,
so simplify the example to fix this.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../bindings/phy/hisilicon,hi3660-usb3.yaml   | 22 +++++--------------
 1 file changed, 6 insertions(+), 16 deletions(-)

diff --git a/Documentation/devicetree/bindings/phy/hisilicon,hi3660-usb3.yaml b/Documentation/devicetree/bindings/phy/hisilicon,hi3660-usb3.yaml
index c2e073e26190..20b79e2e8b82 100644
--- a/Documentation/devicetree/bindings/phy/hisilicon,hi3660-usb3.yaml
+++ b/Documentation/devicetree/bindings/phy/hisilicon,hi3660-usb3.yaml
@@ -41,20 +41,10 @@ additionalProperties: false
 
 examples:
   - |
-    bus {
-      #address-cells = <2>;
-      #size-cells = <2>;
-
-      usb3_otg_bc: usb3_otg_bc@ff200000 {
-        compatible = "syscon", "simple-mfd";
-        reg = <0x0 0xff200000 0x0 0x1000>;
-
-        usb-phy {
-          compatible = "hisilicon,hi3660-usb-phy";
-          #phy-cells = <0>;
-          hisilicon,pericrg-syscon = <&crg_ctrl>;
-          hisilicon,pctrl-syscon = <&pctrl>;
-          hisilicon,eye-diagram-param = <0x22466e4>;
-        };
-      };
+    usb-phy {
+        compatible = "hisilicon,hi3660-usb-phy";
+        #phy-cells = <0>;
+        hisilicon,pericrg-syscon = <&crg_ctrl>;
+        hisilicon,pctrl-syscon = <&pctrl>;
+        hisilicon,eye-diagram-param = <0x22466e4>;
     };
-- 
2.34.1

[PATCH 1/4] dt-bindings: phy: hisilicon,hi3660-usb3: simplify example

[Krzysztof Kozlowski]

syscon and simple-mfd cannot be used without device specific compatible,
so simplify the example to fix this.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../bindings/phy/hisilicon,hi3660-usb3.yaml   | 22 +++++--------------
 1 file changed, 6 insertions(+), 16 deletions(-)

diff --git a/Documentation/devicetree/bindings/phy/hisilicon,hi3660-usb3.yaml b/Documentation/devicetree/bindings/phy/hisilicon,hi3660-usb3.yaml
index c2e073e26190..20b79e2e8b82 100644
--- a/Documentation/devicetree/bindings/phy/hisilicon,hi3660-usb3.yaml
+++ b/Documentation/devicetree/bindings/phy/hisilicon,hi3660-usb3.yaml
@@ -41,20 +41,10 @@ additionalProperties: false
 
 examples:
   - |
-    bus {
-      #address-cells = <2>;
-      #size-cells = <2>;
-
-      usb3_otg_bc: usb3_otg_bc@ff200000 {
-        compatible = "syscon", "simple-mfd";
-        reg = <0x0 0xff200000 0x0 0x1000>;
-
-        usb-phy {
-          compatible = "hisilicon,hi3660-usb-phy";
-          #phy-cells = <0>;
-          hisilicon,pericrg-syscon = <&crg_ctrl>;
-          hisilicon,pctrl-syscon = <&pctrl>;
-          hisilicon,eye-diagram-param = <0x22466e4>;
-        };
-      };
+    usb-phy {
+        compatible = "hisilicon,hi3660-usb-phy";
+        #phy-cells = <0>;
+        hisilicon,pericrg-syscon = <&crg_ctrl>;
+        hisilicon,pctrl-syscon = <&pctrl>;
+        hisilicon,eye-diagram-param = <0x22466e4>;
     };
-- 
2.34.1


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH 2/4] dt-bindings: phy: hisilicon,hi3670-usb3: simplify example

[Krzysztof Kozlowski]

syscon and simple-mfd cannot be used without device specific compatible,
so simplify the example to fix this.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../bindings/phy/hisilicon,hi3670-usb3.yaml   | 26 ++++++-------------
 1 file changed, 8 insertions(+), 18 deletions(-)

diff --git a/Documentation/devicetree/bindings/phy/hisilicon,hi3670-usb3.yaml b/Documentation/devicetree/bindings/phy/hisilicon,hi3670-usb3.yaml
index ebd78acfe2de..1cb00dbcd4c5 100644
--- a/Documentation/devicetree/bindings/phy/hisilicon,hi3670-usb3.yaml
+++ b/Documentation/devicetree/bindings/phy/hisilicon,hi3670-usb3.yaml
@@ -52,22 +52,12 @@ additionalProperties: false
 
 examples:
   - |
-    bus {
-      #address-cells = <2>;
-      #size-cells = <2>;
-
-      usb3_otg_bc: usb3_otg_bc@ff200000 {
-        compatible = "syscon", "simple-mfd";
-        reg = <0x0 0xff200000 0x0 0x1000>;
-
-        usb_phy {
-          compatible = "hisilicon,hi3670-usb-phy";
-          #phy-cells = <0>;
-          hisilicon,pericrg-syscon = <&crg_ctrl>;
-          hisilicon,pctrl-syscon = <&pctrl>;
-          hisilicon,sctrl-syscon = <&sctrl>;
-          hisilicon,eye-diagram-param = <0xfdfee4>;
-          hisilicon,tx-vboost-lvl = <0x5>;
-        };
-      };
+    usb-phy {
+        compatible = "hisilicon,hi3670-usb-phy";
+        #phy-cells = <0>;
+        hisilicon,pericrg-syscon = <&crg_ctrl>;
+        hisilicon,pctrl-syscon = <&pctrl>;
+        hisilicon,sctrl-syscon = <&sctrl>;
+        hisilicon,eye-diagram-param = <0xfdfee4>;
+        hisilicon,tx-vboost-lvl = <0x5>;
     };
-- 
2.34.1

[PATCH 2/4] dt-bindings: phy: hisilicon,hi3670-usb3: simplify example

[Krzysztof Kozlowski]

syscon and simple-mfd cannot be used without device specific compatible,
so simplify the example to fix this.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../bindings/phy/hisilicon,hi3670-usb3.yaml   | 26 ++++++-------------
 1 file changed, 8 insertions(+), 18 deletions(-)

diff --git a/Documentation/devicetree/bindings/phy/hisilicon,hi3670-usb3.yaml b/Documentation/devicetree/bindings/phy/hisilicon,hi3670-usb3.yaml
index ebd78acfe2de..1cb00dbcd4c5 100644
--- a/Documentation/devicetree/bindings/phy/hisilicon,hi3670-usb3.yaml
+++ b/Documentation/devicetree/bindings/phy/hisilicon,hi3670-usb3.yaml
@@ -52,22 +52,12 @@ additionalProperties: false
 
 examples:
   - |
-    bus {
-      #address-cells = <2>;
-      #size-cells = <2>;
-
-      usb3_otg_bc: usb3_otg_bc@ff200000 {
-        compatible = "syscon", "simple-mfd";
-        reg = <0x0 0xff200000 0x0 0x1000>;
-
-        usb_phy {
-          compatible = "hisilicon,hi3670-usb-phy";
-          #phy-cells = <0>;
-          hisilicon,pericrg-syscon = <&crg_ctrl>;
-          hisilicon,pctrl-syscon = <&pctrl>;
-          hisilicon,sctrl-syscon = <&sctrl>;
-          hisilicon,eye-diagram-param = <0xfdfee4>;
-          hisilicon,tx-vboost-lvl = <0x5>;
-        };
-      };
+    usb-phy {
+        compatible = "hisilicon,hi3670-usb-phy";
+        #phy-cells = <0>;
+        hisilicon,pericrg-syscon = <&crg_ctrl>;
+        hisilicon,pctrl-syscon = <&pctrl>;
+        hisilicon,sctrl-syscon = <&sctrl>;
+        hisilicon,eye-diagram-param = <0xfdfee4>;
+        hisilicon,tx-vboost-lvl = <0x5>;
     };
-- 
2.34.1


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH 3/4] dt-bindings: remoteproc: qcom,pil-info: add missing imem compatible

[Krzysztof Kozlowski]

syscon and simple-mfd cannot be used without device specific compatible.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml
index 9282837d64ba..a7711e3c998c 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml
@@ -30,7 +30,7 @@ additionalProperties: false
 examples:
   - |
     imem@146bf000 {
-      compatible = "syscon", "simple-mfd";
+      compatible = "qcom,sdm630-imem", "syscon", "simple-mfd";
       reg = <0x146bf000 0x1000>;
 
       #address-cells = <1>;
-- 
2.34.1

[PATCH 3/4] dt-bindings: remoteproc: qcom,pil-info: add missing imem compatible

[Krzysztof Kozlowski]

syscon and simple-mfd cannot be used without device specific compatible.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml
index 9282837d64ba..a7711e3c998c 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml
@@ -30,7 +30,7 @@ additionalProperties: false
 examples:
   - |
     imem@146bf000 {
-      compatible = "syscon", "simple-mfd";
+      compatible = "qcom,sdm630-imem", "syscon", "simple-mfd";
       reg = <0x146bf000 0x1000>;
 
       #address-cells = <1>;
-- 
2.34.1


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH 4/4] dt-bindings: mfd: syscon: require specific compatible also for simple-mfd

[Krzysztof Kozlowski]

The syscon bindings require a device specific compatible, beside the
"syscon".  However schema counts "simple-mfd" as such, which allows
simple-mfd+syscon to sneak in.

Adjust the match to be sure simple-mfd also comes with a device specific
compatible.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/mfd/syscon.yaml | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/mfd/syscon.yaml b/Documentation/devicetree/bindings/mfd/syscon.yaml
index c958086a5fc3..a64c7a71e6fe 100644
--- a/Documentation/devicetree/bindings/mfd/syscon.yaml
+++ b/Documentation/devicetree/bindings/mfd/syscon.yaml
@@ -72,7 +72,7 @@ properties:
       - contains:
           const: syscon
         minItems: 2
-        maxItems: 4  # Should be enough
+        maxItems: 5  # Should be enough
 
   reg:
     maxItems: 1
@@ -93,6 +93,18 @@ required:
   - compatible
   - reg
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: simple-mfd
+    then:
+      properties:
+        compatible:
+          minItems: 3
+          maxItems: 5
+
 additionalProperties: true
 
 examples:
-- 
2.34.1

[PATCH 4/4] dt-bindings: mfd: syscon: require specific compatible also for simple-mfd

[Krzysztof Kozlowski]

The syscon bindings require a device specific compatible, beside the
"syscon".  However schema counts "simple-mfd" as such, which allows
simple-mfd+syscon to sneak in.

Adjust the match to be sure simple-mfd also comes with a device specific
compatible.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/mfd/syscon.yaml | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/mfd/syscon.yaml b/Documentation/devicetree/bindings/mfd/syscon.yaml
index c958086a5fc3..a64c7a71e6fe 100644
--- a/Documentation/devicetree/bindings/mfd/syscon.yaml
+++ b/Documentation/devicetree/bindings/mfd/syscon.yaml
@@ -72,7 +72,7 @@ properties:
       - contains:
           const: syscon
         minItems: 2
-        maxItems: 4  # Should be enough
+        maxItems: 5  # Should be enough
 
   reg:
     maxItems: 1
@@ -93,6 +93,18 @@ required:
   - compatible
   - reg
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: simple-mfd
+    then:
+      properties:
+        compatible:
+          minItems: 3
+          maxItems: 5
+
 additionalProperties: true
 
 examples:
-- 
2.34.1


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: [PATCH 1/4] dt-bindings: phy: hisilicon,hi3660-usb3: simplify example

[Vinod Koul]

On 17-08-22, 17:22, Krzysztof Kozlowski wrote:
> syscon and simple-mfd cannot be used without device specific compatible,
> so simplify the example to fix this.

Acked-By: Vinod Koul <vkoul@kernel.org>

-- 
~Vinod

Re: [PATCH 1/4] dt-bindings: phy: hisilicon,hi3660-usb3: simplify example

[Vinod Koul]

On 17-08-22, 17:22, Krzysztof Kozlowski wrote:
> syscon and simple-mfd cannot be used without device specific compatible,
> so simplify the example to fix this.

Acked-By: Vinod Koul <vkoul@kernel.org>

-- 
~Vinod

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: [PATCH 2/4] dt-bindings: phy: hisilicon,hi3670-usb3: simplify example

[Vinod Koul]

On 17-08-22, 17:22, Krzysztof Kozlowski wrote:
> syscon and simple-mfd cannot be used without device specific compatible,
> so simplify the example to fix this.

Acked-By: Vinod Koul <vkoul@kernel.org>

-- 
~Vinod

Re: [PATCH 2/4] dt-bindings: phy: hisilicon,hi3670-usb3: simplify example

[Vinod Koul]

On 17-08-22, 17:22, Krzysztof Kozlowski wrote:
> syscon and simple-mfd cannot be used without device specific compatible,
> so simplify the example to fix this.

Acked-By: Vinod Koul <vkoul@kernel.org>

-- 
~Vinod

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: [PATCH 2/4] dt-bindings: phy: hisilicon,hi3670-usb3: simplify example

[Mauro Carvalho Chehab]

Em Wed, 17 Aug 2022 17:22:44 +0300
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> escreveu:

> syscon and simple-mfd cannot be used without device specific compatible,
> so simplify the example to fix this.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  .../bindings/phy/hisilicon,hi3670-usb3.yaml   | 26 ++++++-------------
>  1 file changed, 8 insertions(+), 18 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/phy/hisilicon,hi3670-usb3.yaml b/Documentation/devicetree/bindings/phy/hisilicon,hi3670-usb3.yaml
> index ebd78acfe2de..1cb00dbcd4c5 100644
> --- a/Documentation/devicetree/bindings/phy/hisilicon,hi3670-usb3.yaml
> +++ b/Documentation/devicetree/bindings/phy/hisilicon,hi3670-usb3.yaml
> @@ -52,22 +52,12 @@ additionalProperties: false
>  
>  examples:
>    - |
> -    bus {
> -      #address-cells = <2>;
> -      #size-cells = <2>;
> -
> -      usb3_otg_bc: usb3_otg_bc@ff200000 {
> -        compatible = "syscon", "simple-mfd";
> -        reg = <0x0 0xff200000 0x0 0x1000>;
> -
> -        usb_phy {
> -          compatible = "hisilicon,hi3670-usb-phy";
> -          #phy-cells = <0>;
> -          hisilicon,pericrg-syscon = <&crg_ctrl>;
> -          hisilicon,pctrl-syscon = <&pctrl>;
> -          hisilicon,sctrl-syscon = <&sctrl>;
> -          hisilicon,eye-diagram-param = <0xfdfee4>;
> -          hisilicon,tx-vboost-lvl = <0x5>;
> -        };
> -      };
> +    usb-phy {
> +        compatible = "hisilicon,hi3670-usb-phy";
> +        #phy-cells = <0>;
> +        hisilicon,pericrg-syscon = <&crg_ctrl>;
> +        hisilicon,pctrl-syscon = <&pctrl>;
> +        hisilicon,sctrl-syscon = <&sctrl>;
> +        hisilicon,eye-diagram-param = <0xfdfee4>;
> +        hisilicon,tx-vboost-lvl = <0x5>;
>      };

Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org>

Thanks,
Mauro

Re: [PATCH 2/4] dt-bindings: phy: hisilicon,hi3670-usb3: simplify example

[Mauro Carvalho Chehab]

Em Wed, 17 Aug 2022 17:22:44 +0300
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> escreveu:

> syscon and simple-mfd cannot be used without device specific compatible,
> so simplify the example to fix this.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  .../bindings/phy/hisilicon,hi3670-usb3.yaml   | 26 ++++++-------------
>  1 file changed, 8 insertions(+), 18 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/phy/hisilicon,hi3670-usb3.yaml b/Documentation/devicetree/bindings/phy/hisilicon,hi3670-usb3.yaml
> index ebd78acfe2de..1cb00dbcd4c5 100644
> --- a/Documentation/devicetree/bindings/phy/hisilicon,hi3670-usb3.yaml
> +++ b/Documentation/devicetree/bindings/phy/hisilicon,hi3670-usb3.yaml
> @@ -52,22 +52,12 @@ additionalProperties: false
>  
>  examples:
>    - |
> -    bus {
> -      #address-cells = <2>;
> -      #size-cells = <2>;
> -
> -      usb3_otg_bc: usb3_otg_bc@ff200000 {
> -        compatible = "syscon", "simple-mfd";
> -        reg = <0x0 0xff200000 0x0 0x1000>;
> -
> -        usb_phy {
> -          compatible = "hisilicon,hi3670-usb-phy";
> -          #phy-cells = <0>;
> -          hisilicon,pericrg-syscon = <&crg_ctrl>;
> -          hisilicon,pctrl-syscon = <&pctrl>;
> -          hisilicon,sctrl-syscon = <&sctrl>;
> -          hisilicon,eye-diagram-param = <0xfdfee4>;
> -          hisilicon,tx-vboost-lvl = <0x5>;
> -        };
> -      };
> +    usb-phy {
> +        compatible = "hisilicon,hi3670-usb-phy";
> +        #phy-cells = <0>;
> +        hisilicon,pericrg-syscon = <&crg_ctrl>;
> +        hisilicon,pctrl-syscon = <&pctrl>;
> +        hisilicon,sctrl-syscon = <&sctrl>;
> +        hisilicon,eye-diagram-param = <0xfdfee4>;
> +        hisilicon,tx-vboost-lvl = <0x5>;
>      };

Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org>

Thanks,
Mauro

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: [PATCH 1/4] dt-bindings: phy: hisilicon,hi3660-usb3: simplify example

[Mauro Carvalho Chehab]

Em Wed, 17 Aug 2022 17:22:43 +0300
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> escreveu:

> syscon and simple-mfd cannot be used without device specific compatible,
> so simplify the example to fix this.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  .../bindings/phy/hisilicon,hi3660-usb3.yaml   | 22 +++++--------------
>  1 file changed, 6 insertions(+), 16 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/phy/hisilicon,hi3660-usb3.yaml b/Documentation/devicetree/bindings/phy/hisilicon,hi3660-usb3.yaml
> index c2e073e26190..20b79e2e8b82 100644
> --- a/Documentation/devicetree/bindings/phy/hisilicon,hi3660-usb3.yaml
> +++ b/Documentation/devicetree/bindings/phy/hisilicon,hi3660-usb3.yaml
> @@ -41,20 +41,10 @@ additionalProperties: false
>  
>  examples:
>    - |
> -    bus {
> -      #address-cells = <2>;
> -      #size-cells = <2>;
> -
> -      usb3_otg_bc: usb3_otg_bc@ff200000 {
> -        compatible = "syscon", "simple-mfd";
> -        reg = <0x0 0xff200000 0x0 0x1000>;
> -
> -        usb-phy {
> -          compatible = "hisilicon,hi3660-usb-phy";
> -          #phy-cells = <0>;
> -          hisilicon,pericrg-syscon = <&crg_ctrl>;
> -          hisilicon,pctrl-syscon = <&pctrl>;
> -          hisilicon,eye-diagram-param = <0x22466e4>;
> -        };
> -      };
> +    usb-phy {
> +        compatible = "hisilicon,hi3660-usb-phy";
> +        #phy-cells = <0>;
> +        hisilicon,pericrg-syscon = <&crg_ctrl>;
> +        hisilicon,pctrl-syscon = <&pctrl>;
> +        hisilicon,eye-diagram-param = <0x22466e4>;
>      };

Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org>

Thanks,
Mauro

Re: [PATCH 1/4] dt-bindings: phy: hisilicon,hi3660-usb3: simplify example

[Mauro Carvalho Chehab]

Em Wed, 17 Aug 2022 17:22:43 +0300
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> escreveu:

> syscon and simple-mfd cannot be used without device specific compatible,
> so simplify the example to fix this.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  .../bindings/phy/hisilicon,hi3660-usb3.yaml   | 22 +++++--------------
>  1 file changed, 6 insertions(+), 16 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/phy/hisilicon,hi3660-usb3.yaml b/Documentation/devicetree/bindings/phy/hisilicon,hi3660-usb3.yaml
> index c2e073e26190..20b79e2e8b82 100644
> --- a/Documentation/devicetree/bindings/phy/hisilicon,hi3660-usb3.yaml
> +++ b/Documentation/devicetree/bindings/phy/hisilicon,hi3660-usb3.yaml
> @@ -41,20 +41,10 @@ additionalProperties: false
>  
>  examples:
>    - |
> -    bus {
> -      #address-cells = <2>;
> -      #size-cells = <2>;
> -
> -      usb3_otg_bc: usb3_otg_bc@ff200000 {
> -        compatible = "syscon", "simple-mfd";
> -        reg = <0x0 0xff200000 0x0 0x1000>;
> -
> -        usb-phy {
> -          compatible = "hisilicon,hi3660-usb-phy";
> -          #phy-cells = <0>;
> -          hisilicon,pericrg-syscon = <&crg_ctrl>;
> -          hisilicon,pctrl-syscon = <&pctrl>;
> -          hisilicon,eye-diagram-param = <0x22466e4>;
> -        };
> -      };
> +    usb-phy {
> +        compatible = "hisilicon,hi3660-usb-phy";
> +        #phy-cells = <0>;
> +        hisilicon,pericrg-syscon = <&crg_ctrl>;
> +        hisilicon,pctrl-syscon = <&pctrl>;
> +        hisilicon,eye-diagram-param = <0x22466e4>;
>      };

Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org>

Thanks,
Mauro

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: [PATCH 4/4] dt-bindings: mfd: syscon: require specific compatible also for simple-mfd

[Lee Jones]

On Wed, 17 Aug 2022, Krzysztof Kozlowski wrote:

> The syscon bindings require a device specific compatible, beside the
> "syscon".  However schema counts "simple-mfd" as such, which allows
> simple-mfd+syscon to sneak in.
> 
> Adjust the match to be sure simple-mfd also comes with a device specific
> compatible.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  Documentation/devicetree/bindings/mfd/syscon.yaml | 14 +++++++++++++-
>  1 file changed, 13 insertions(+), 1 deletion(-)

Applied, thanks.

-- 
Lee Jones [李琼斯]

Re: [PATCH 4/4] dt-bindings: mfd: syscon: require specific compatible also for simple-mfd

[Lee Jones]

On Wed, 17 Aug 2022, Krzysztof Kozlowski wrote:

> The syscon bindings require a device specific compatible, beside the
> "syscon".  However schema counts "simple-mfd" as such, which allows
> simple-mfd+syscon to sneak in.
> 
> Adjust the match to be sure simple-mfd also comes with a device specific
> compatible.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  Documentation/devicetree/bindings/mfd/syscon.yaml | 14 +++++++++++++-
>  1 file changed, 13 insertions(+), 1 deletion(-)

Applied, thanks.

-- 
Lee Jones [李琼斯]

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: [PATCH 0/4] mfd/phy/remoteproc: dt-bindings: syscon: be specific

[Rob Herring]

On Wed, 17 Aug 2022 17:22:42 +0300, Krzysztof Kozlowski wrote:
> Hi,
> 
> The last MFD/syscon patch depends on the previous ones to avoid
> dt_binding_check warnings.
> 
> I propose to take entire set via Rob's DT tree.

This may have been in the window where PW server moved and stopped 
getting patches, so I missed it until patch 4 got applied and broke 
linux-next...

> 
> Best regards,
> Krzysztof
> 
> Krzysztof Kozlowski (4):
>   dt-bindings: phy: hisilicon,hi3660-usb3: simplify example
>   dt-bindings: phy: hisilicon,hi3670-usb3: simplify example
>   dt-bindings: remoteproc: qcom,pil-info: add missing imem compatible
>   dt-bindings: mfd: syscon: require specific compatible also for
>     simple-mfd

I applied patches 1-3, thanks!

Rob

Re: [PATCH 0/4] mfd/phy/remoteproc: dt-bindings: syscon: be specific

[Rob Herring]

On Wed, 17 Aug 2022 17:22:42 +0300, Krzysztof Kozlowski wrote:
> Hi,
> 
> The last MFD/syscon patch depends on the previous ones to avoid
> dt_binding_check warnings.
> 
> I propose to take entire set via Rob's DT tree.

This may have been in the window where PW server moved and stopped 
getting patches, so I missed it until patch 4 got applied and broke 
linux-next...

> 
> Best regards,
> Krzysztof
> 
> Krzysztof Kozlowski (4):
>   dt-bindings: phy: hisilicon,hi3660-usb3: simplify example
>   dt-bindings: phy: hisilicon,hi3670-usb3: simplify example
>   dt-bindings: remoteproc: qcom,pil-info: add missing imem compatible
>   dt-bindings: mfd: syscon: require specific compatible also for
>     simple-mfd

I applied patches 1-3, thanks!

Rob

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy