From: Romain Perier <romain.perier@gmail.com>
To: Thierry Reding <thierry.reding@gmail.com>,
Lee Jones <lee.jones@linaro.org>, Daniel Palmer <daniel@0x0f.com>,
Romain Perier <romain.perier@gmail.com>,
Rob Herring <robh+dt@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-pwm@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 0/5] Add PWM for MStar SoCs
Date: Wed, 7 Sep 2022 15:12:36 +0200 [thread overview]
Message-ID: <20220907131241.31941-1-romain.perier@gmail.com> (raw)
This patches series adds a new driver for the PWM found in the Mstar
MSC313e SoCs and newer. It adds a basic pwm driver, the corresponding
devicetree bindings and its documentation.
Changes since v1:
- Fixed commit message for the dt-bindings doc
- Removed "OneOf" from the dt-bindings doc
- Re-ordered alphabetically in Kconfig and remove
unseless empty lines
- Explain and adds comment in _writecounter() (hw
constrainst)
- Reworked the msc313e_pwm_config() function
- Fixed clk handling
- Removed extra callbacks, only keep .apply and .get_state
- Implement .get_state completly, this fixes the driver with PWM_DEBUG
(the whole driver has been tested with PWM_DEBUG).
- Dropped useless lines in _probe
- I have kept regmap_field() because it is more clean and helpful, it
avoids to do too much of offset and mask and shift all over the place.
Daniel Palmer (1):
pwm: Add support for the MSTAR MSC313 PWM
Romain Perier (4):
dt-bindings: pwm: Add Mstar MSC313e PWM devicetree bindings
documentation
ARM: dts: mstar: Add pwm device node to infinity
ARM: dts: mstar: Add pwm device node to infinity3
ARM: dts: mstar: Add pwm device node to infinity2m
.../bindings/pwm/mstar,msc313e-pwm.yaml | 46 +++
MAINTAINERS | 1 +
arch/arm/boot/dts/mstar-infinity.dtsi | 10 +
arch/arm/boot/dts/mstar-infinity2m.dtsi | 8 +
arch/arm/boot/dts/mstar-infinity3.dtsi | 10 +
drivers/pwm/Kconfig | 10 +
drivers/pwm/Makefile | 1 +
drivers/pwm/pwm-msc313e.c | 269 ++++++++++++++++++
8 files changed, 355 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pwm/mstar,msc313e-pwm.yaml
create mode 100644 drivers/pwm/pwm-msc313e.c
--
2.35.1
WARNING: multiple messages have this Message-ID (diff)
From: Romain Perier <romain.perier@gmail.com>
To: Thierry Reding <thierry.reding@gmail.com>,
Lee Jones <lee.jones@linaro.org>, Daniel Palmer <daniel@0x0f.com>,
Romain Perier <romain.perier@gmail.com>,
Rob Herring <robh+dt@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-pwm@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 0/5] Add PWM for MStar SoCs
Date: Wed, 7 Sep 2022 15:12:36 +0200 [thread overview]
Message-ID: <20220907131241.31941-1-romain.perier@gmail.com> (raw)
This patches series adds a new driver for the PWM found in the Mstar
MSC313e SoCs and newer. It adds a basic pwm driver, the corresponding
devicetree bindings and its documentation.
Changes since v1:
- Fixed commit message for the dt-bindings doc
- Removed "OneOf" from the dt-bindings doc
- Re-ordered alphabetically in Kconfig and remove
unseless empty lines
- Explain and adds comment in _writecounter() (hw
constrainst)
- Reworked the msc313e_pwm_config() function
- Fixed clk handling
- Removed extra callbacks, only keep .apply and .get_state
- Implement .get_state completly, this fixes the driver with PWM_DEBUG
(the whole driver has been tested with PWM_DEBUG).
- Dropped useless lines in _probe
- I have kept regmap_field() because it is more clean and helpful, it
avoids to do too much of offset and mask and shift all over the place.
Daniel Palmer (1):
pwm: Add support for the MSTAR MSC313 PWM
Romain Perier (4):
dt-bindings: pwm: Add Mstar MSC313e PWM devicetree bindings
documentation
ARM: dts: mstar: Add pwm device node to infinity
ARM: dts: mstar: Add pwm device node to infinity3
ARM: dts: mstar: Add pwm device node to infinity2m
.../bindings/pwm/mstar,msc313e-pwm.yaml | 46 +++
MAINTAINERS | 1 +
arch/arm/boot/dts/mstar-infinity.dtsi | 10 +
arch/arm/boot/dts/mstar-infinity2m.dtsi | 8 +
arch/arm/boot/dts/mstar-infinity3.dtsi | 10 +
drivers/pwm/Kconfig | 10 +
drivers/pwm/Makefile | 1 +
drivers/pwm/pwm-msc313e.c | 269 ++++++++++++++++++
8 files changed, 355 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pwm/mstar,msc313e-pwm.yaml
create mode 100644 drivers/pwm/pwm-msc313e.c
--
2.35.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2022-09-07 13:12 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-07 13:12 Romain Perier [this message]
2022-09-07 13:12 ` [PATCH v2 0/5] Add PWM for MStar SoCs Romain Perier
2022-09-07 13:12 ` [PATCH v2 1/5] dt-bindings: pwm: Add Mstar MSC313e PWM devicetree bindings documentation Romain Perier
2022-09-07 13:12 ` Romain Perier
2022-09-12 20:33 ` Rob Herring
2022-09-12 20:33 ` Rob Herring
2022-10-28 23:33 ` Krzysztof Kozlowski
2022-10-28 23:33 ` Krzysztof Kozlowski
2022-09-07 13:12 ` [PATCH v2 2/5] pwm: Add support for the MSTAR MSC313 PWM Romain Perier
2022-09-07 13:12 ` Romain Perier
2022-09-27 16:33 ` Uwe Kleine-König
2022-09-27 16:33 ` Uwe Kleine-König
2022-09-28 12:47 ` Daniel Palmer
2022-09-28 12:47 ` Daniel Palmer
2022-10-27 8:36 ` Romain Perier
2022-10-27 8:36 ` Romain Perier
2022-10-27 9:22 ` Uwe Kleine-König
2022-10-27 9:22 ` Uwe Kleine-König
2022-09-07 13:12 ` [PATCH v2 3/5] ARM: dts: mstar: Add pwm device node to infinity Romain Perier
2022-09-07 13:12 ` Romain Perier
2022-09-07 13:12 ` [PATCH v2 4/5] ARM: dts: mstar: Add pwm device node to infinity3 Romain Perier
2022-09-07 13:12 ` Romain Perier
2022-09-07 13:12 ` [PATCH v2 5/5] ARM: dts: mstar: Add pwm device node to infinity2m Romain Perier
2022-09-07 13:12 ` Romain Perier
2022-09-27 6:41 ` [PATCH v2 0/5] Add PWM for MStar SoCs Romain Perier
2022-09-27 6:41 ` Romain Perier
2022-10-28 23:32 ` Krzysztof Kozlowski
2022-10-28 23:32 ` Krzysztof Kozlowski
[not found] ` <CABgxDo+2OXLy7-xEetQ4zzaPQbB4tbQ=WtdcU494Uo5xWpPkVg@mail.gmail.com>
2022-11-02 14:06 ` Krzysztof Kozlowski
2022-11-02 14:06 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220907131241.31941-1-romain.perier@gmail.com \
--to=romain.perier@gmail.com \
--cc=daniel@0x0f.com \
--cc=devicetree@vger.kernel.org \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.