From: Marcel Ziswiler <marcel@ziswiler.com>
To: linux-arm-kernel@lists.infradead.org
Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>,
Alistair Francis <alistair@alistair23.me>,
Arnd Bergmann <arnd@arndb.de>, Fabio Estevam <festevam@gmail.com>,
Johann Neuhauser <jneuhauser@dh-electronics.com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Max Krummenacher <max.krummenacher@toradex.com>,
NXP Linux Team <linux-imx@nxp.com>,
Neil Armstrong <neil.armstrong@linaro.org>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Rob Herring <robh+dt@kernel.org>,
Russell King <linux@armlinux.org.uk>,
Sascha Hauer <s.hauer@pengutronix.de>,
Shawn Guo <shawnguo@kernel.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 0/5] arm: dts: colibri-imx6: usb dual-role switching et. al.
Date: Wed, 28 Sep 2022 09:33:31 +0200 [thread overview]
Message-ID: <20220928073336.63881-1-marcel@ziswiler.com> (raw)
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
This series is an assortment of USB dual-role specific commits as
follows:
Introduce USBC_DET GPIO based USB dual-role aka device/host switching.
Move USB VBUS supply from single carrier board to module level device
tree. This pin is as per Colibri module family standard.
Specify USBH_PEN GPIO being active-low rather than active-high
(cosmetic only).
Remove spurious debounce property from linux,extcon-usb-gpio. That
commit is actually for Colibri iMX7.
Changes in v2:
- Dropped fixes tag as this change is rather cosmetic.
- Add new commit also actually enabling CONFIG_EXTCON_USB_GPIO.
Marcel Ziswiler (4):
arm: dts: colibri-imx6: move vbus-supply to module level device tree
arm: dts: colibri-imx6: specify usbh_pen gpio being active-low
arm: dts: imx7-colibri: remove spurious debounce property
ARM: imx_v6_v7_defconfig: Enable USB GPIO extcon support
Philippe Schenker (1):
arm: dts: colibri-imx6: usb dual-role switching
arch/arm/boot/dts/imx6dl-colibri-aster.dts | 1 -
arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts | 1 -
arch/arm/boot/dts/imx6dl-colibri-iris.dts | 1 -
arch/arm/boot/dts/imx6qdl-colibri.dtsi | 22 ++++++++++++++++----
arch/arm/boot/dts/imx7-colibri.dtsi | 1 -
arch/arm/configs/imx_v6_v7_defconfig | 1 +
6 files changed, 19 insertions(+), 8 deletions(-)
--
2.36.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Marcel Ziswiler <marcel@ziswiler.com>
To: linux-arm-kernel@lists.infradead.org
Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>,
Alistair Francis <alistair@alistair23.me>,
Arnd Bergmann <arnd@arndb.de>, Fabio Estevam <festevam@gmail.com>,
Johann Neuhauser <jneuhauser@dh-electronics.com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Max Krummenacher <max.krummenacher@toradex.com>,
NXP Linux Team <linux-imx@nxp.com>,
Neil Armstrong <neil.armstrong@linaro.org>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Rob Herring <robh+dt@kernel.org>,
Russell King <linux@armlinux.org.uk>,
Sascha Hauer <s.hauer@pengutronix.de>,
Shawn Guo <shawnguo@kernel.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 0/5] arm: dts: colibri-imx6: usb dual-role switching et. al.
Date: Wed, 28 Sep 2022 09:33:31 +0200 [thread overview]
Message-ID: <20220928073336.63881-1-marcel@ziswiler.com> (raw)
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
This series is an assortment of USB dual-role specific commits as
follows:
Introduce USBC_DET GPIO based USB dual-role aka device/host switching.
Move USB VBUS supply from single carrier board to module level device
tree. This pin is as per Colibri module family standard.
Specify USBH_PEN GPIO being active-low rather than active-high
(cosmetic only).
Remove spurious debounce property from linux,extcon-usb-gpio. That
commit is actually for Colibri iMX7.
Changes in v2:
- Dropped fixes tag as this change is rather cosmetic.
- Add new commit also actually enabling CONFIG_EXTCON_USB_GPIO.
Marcel Ziswiler (4):
arm: dts: colibri-imx6: move vbus-supply to module level device tree
arm: dts: colibri-imx6: specify usbh_pen gpio being active-low
arm: dts: imx7-colibri: remove spurious debounce property
ARM: imx_v6_v7_defconfig: Enable USB GPIO extcon support
Philippe Schenker (1):
arm: dts: colibri-imx6: usb dual-role switching
arch/arm/boot/dts/imx6dl-colibri-aster.dts | 1 -
arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts | 1 -
arch/arm/boot/dts/imx6dl-colibri-iris.dts | 1 -
arch/arm/boot/dts/imx6qdl-colibri.dtsi | 22 ++++++++++++++++----
arch/arm/boot/dts/imx7-colibri.dtsi | 1 -
arch/arm/configs/imx_v6_v7_defconfig | 1 +
6 files changed, 19 insertions(+), 8 deletions(-)
--
2.36.1
next reply other threads:[~2022-09-28 7:36 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-28 7:33 Marcel Ziswiler [this message]
2022-09-28 7:33 ` [PATCH v2 0/5] arm: dts: colibri-imx6: usb dual-role switching et. al Marcel Ziswiler
2022-09-28 7:33 ` [PATCH v2 1/5] arm: dts: colibri-imx6: usb dual-role switching Marcel Ziswiler
2022-09-28 7:33 ` Marcel Ziswiler
2022-09-28 7:33 ` [PATCH v2 2/5] arm: dts: colibri-imx6: move vbus-supply to module level device tree Marcel Ziswiler
2022-09-28 7:33 ` Marcel Ziswiler
2022-09-28 7:33 ` [PATCH v2 3/5] arm: dts: colibri-imx6: specify usbh_pen gpio being active-low Marcel Ziswiler
2022-09-28 7:33 ` Marcel Ziswiler
2022-09-28 7:33 ` [PATCH v2 4/5] arm: dts: imx7-colibri: remove spurious debounce property Marcel Ziswiler
2022-09-28 7:33 ` Marcel Ziswiler
2022-09-28 7:33 ` [PATCH v2 5/5] ARM: imx_v6_v7_defconfig: Enable USB GPIO extcon support Marcel Ziswiler
2022-09-28 7:33 ` Marcel Ziswiler
2022-10-24 1:58 ` [PATCH v2 0/5] arm: dts: colibri-imx6: usb dual-role switching et. al Shawn Guo
2022-10-24 1:58 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220928073336.63881-1-marcel@ziswiler.com \
--to=marcel@ziswiler.com \
--cc=alistair@alistair23.me \
--cc=arnd@arndb.de \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=jneuhauser@dh-electronics.com \
--cc=kernel@pengutronix.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=marcel.ziswiler@toradex.com \
--cc=max.krummenacher@toradex.com \
--cc=neil.armstrong@linaro.org \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.