All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mathieu Poirier <mathieu.poirier@linaro.org>
To: Tanmay Shah <tanmays@amd.com>
Cc: andersson@kernel.org, robh+dt@kernel.org,
	krzysztof.kozlowski+dt@linaro.org, michal.simek@xilinx.com,
	ben.levinsky@xilinx.com, tanmay.shah@xilinx.com,
	michal.simek@amd.com, linux-remoteproc@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v9 6/6] drivers: remoteproc: Add Xilinx r5 remoteproc driver
Date: Thu, 29 Sep 2022 11:22:00 -0600	[thread overview]
Message-ID: <20220929172200.GB3107608@p14s> (raw)
In-Reply-To: <d1cfa787-9f8e-fe8a-d816-0bd8c3a3244d@amd.com>

On Mon, Sep 26, 2022 at 03:02:22PM -0700, Tanmay Shah wrote:
> 
> On 9/1/22 1:25 PM, Mathieu Poirier wrote:
> > On Thu, Jul 07, 2022 at 06:39:55PM -0700, Tanmay Shah wrote:
> [ ... ]
> > > --- /dev/null
> > > +++ b/drivers/remoteproc/xlnx_r5_remoteproc.c
> > > @@ -0,0 +1,1055 @@
> > > +// SPDX-License-Identifier: GPL-2.0
> 
> Hi Mathieu,
> 
> I tried to fix SPDX-License-Identifier to GPL (same as MODULE_LICENSE
> below), However checkpatch.pl reports this as following warning:
> 
> "WARNING: 'SPDX-License-Identifier: GPL' is not supported in LICENSES/..."
> 
> I see that GPL-1.0 is under LICENSE/deprecated directory.
> 
> > > +/*
> > > + * ZynqMP R5 Remote Processor driver
> > > + *
> > > + */
> > > +
> > > +#include <dt-bindings/power/xlnx-zynqmp-power.h>
> 
> [ ... ]
> 
> > > +MODULE_DEVICE_TABLE(of, zynqmp_r5_remoteproc_match);
> > > +
> > > +static struct platform_driver zynqmp_r5_remoteproc_driver = {
> > > +	.probe = zynqmp_r5_remoteproc_probe,
> > > +	.driver = {
> > > +		.name = "zynqmp_r5_remoteproc",
> > > +		.of_match_table = zynqmp_r5_remoteproc_match,
> > > +	},
> > > +};
> > > +module_platform_driver(zynqmp_r5_remoteproc_driver);
> > > +
> > > +MODULE_DESCRIPTION("Xilinx R5F remote processor driver");
> > > +MODULE_AUTHOR("Xilinx Inc.");
> > > +MODULE_LICENSE("GPL");
> > There is a discrepency between the GPL-2.0 in the SPDS identifier and the above.
> 
> Also, changing to MODULE_LICENSE("GPL v2") gives following warning:
> 
> WARNING: Prefer "GPL" over "GPL v2" - see commit bf7fbeeae6db ("module: Cure
> the MODULE_LICENSE "GPL" vs. "GPL v2" bogosity")
> #1115: FILE: drivers/remoteproc/xlnx_r5_remoteproc.c:1034:
> +MODULE_LICENSE("GPL v2");
> 
> So, It looks like SPDX-License-Identifier should be GPL-2.0-only and
> MODULE_LICENSE should be change to "GPL".

Commit bf7fbeeae6db is an interesting read - thanks for pointing it out.

> 
> It this ok? Any other suggestions ?

What you have looks good, in that regard there is no need to change anything
from your patch. 

> 
> Thanks,
> 
> Tanmay
> 
> > 
> > More comments tomorrow or Tuesday.
> > 
> > Thanks,
> > Mathieu
> > 
> > > -- 
> > > 2.25.1
> > > 

WARNING: multiple messages have this Message-ID (diff)
From: Mathieu Poirier <mathieu.poirier@linaro.org>
To: Tanmay Shah <tanmays@amd.com>
Cc: andersson@kernel.org, robh+dt@kernel.org,
	krzysztof.kozlowski+dt@linaro.org, michal.simek@xilinx.com,
	ben.levinsky@xilinx.com, tanmay.shah@xilinx.com,
	michal.simek@amd.com, linux-remoteproc@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v9 6/6] drivers: remoteproc: Add Xilinx r5 remoteproc driver
Date: Thu, 29 Sep 2022 11:22:00 -0600	[thread overview]
Message-ID: <20220929172200.GB3107608@p14s> (raw)
In-Reply-To: <d1cfa787-9f8e-fe8a-d816-0bd8c3a3244d@amd.com>

On Mon, Sep 26, 2022 at 03:02:22PM -0700, Tanmay Shah wrote:
> 
> On 9/1/22 1:25 PM, Mathieu Poirier wrote:
> > On Thu, Jul 07, 2022 at 06:39:55PM -0700, Tanmay Shah wrote:
> [ ... ]
> > > --- /dev/null
> > > +++ b/drivers/remoteproc/xlnx_r5_remoteproc.c
> > > @@ -0,0 +1,1055 @@
> > > +// SPDX-License-Identifier: GPL-2.0
> 
> Hi Mathieu,
> 
> I tried to fix SPDX-License-Identifier to GPL (same as MODULE_LICENSE
> below), However checkpatch.pl reports this as following warning:
> 
> "WARNING: 'SPDX-License-Identifier: GPL' is not supported in LICENSES/..."
> 
> I see that GPL-1.0 is under LICENSE/deprecated directory.
> 
> > > +/*
> > > + * ZynqMP R5 Remote Processor driver
> > > + *
> > > + */
> > > +
> > > +#include <dt-bindings/power/xlnx-zynqmp-power.h>
> 
> [ ... ]
> 
> > > +MODULE_DEVICE_TABLE(of, zynqmp_r5_remoteproc_match);
> > > +
> > > +static struct platform_driver zynqmp_r5_remoteproc_driver = {
> > > +	.probe = zynqmp_r5_remoteproc_probe,
> > > +	.driver = {
> > > +		.name = "zynqmp_r5_remoteproc",
> > > +		.of_match_table = zynqmp_r5_remoteproc_match,
> > > +	},
> > > +};
> > > +module_platform_driver(zynqmp_r5_remoteproc_driver);
> > > +
> > > +MODULE_DESCRIPTION("Xilinx R5F remote processor driver");
> > > +MODULE_AUTHOR("Xilinx Inc.");
> > > +MODULE_LICENSE("GPL");
> > There is a discrepency between the GPL-2.0 in the SPDS identifier and the above.
> 
> Also, changing to MODULE_LICENSE("GPL v2") gives following warning:
> 
> WARNING: Prefer "GPL" over "GPL v2" - see commit bf7fbeeae6db ("module: Cure
> the MODULE_LICENSE "GPL" vs. "GPL v2" bogosity")
> #1115: FILE: drivers/remoteproc/xlnx_r5_remoteproc.c:1034:
> +MODULE_LICENSE("GPL v2");
> 
> So, It looks like SPDX-License-Identifier should be GPL-2.0-only and
> MODULE_LICENSE should be change to "GPL".

Commit bf7fbeeae6db is an interesting read - thanks for pointing it out.

> 
> It this ok? Any other suggestions ?

What you have looks good, in that regard there is no need to change anything
from your patch. 

> 
> Thanks,
> 
> Tanmay
> 
> > 
> > More comments tomorrow or Tuesday.
> > 
> > Thanks,
> > Mathieu
> > 
> > > -- 
> > > 2.25.1
> > > 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2022-09-29 17:23 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-07-08  1:39 [PATCH v9 0/6] Add Xilinx RPU subsystem support Tanmay Shah
2022-07-08  1:39 ` Tanmay Shah
2022-07-08  1:39 ` [PATCH v9 1/6] dt-bindings: remoteproc: Add Xilinx RPU subsystem bindings Tanmay Shah
2022-07-08  1:39   ` Tanmay Shah
2022-09-01 17:38   ` Mathieu Poirier
2022-09-01 17:38     ` Mathieu Poirier
2022-09-01 19:29     ` Tanmay Shah
2022-09-01 19:29       ` Tanmay Shah
2022-09-06 23:02   ` Tanmay Shah
2022-09-06 23:02     ` Tanmay Shah
2022-07-08  1:39 ` [PATCH v9 2/6] arm64: dts: xilinx: zynqmp: Add RPU subsystem device node Tanmay Shah
2022-07-08  1:39   ` Tanmay Shah
2022-07-08  1:39 ` [PATCH v9 3/6] firmware: xilinx: Add ZynqMP firmware ioctl enums for RPU configuration Tanmay Shah
2022-07-08  1:39   ` Tanmay Shah
2022-07-08  1:39 ` [PATCH v9 4/6] firmware: xilinx: Add shutdown/wakeup APIs Tanmay Shah
2022-07-08  1:39   ` Tanmay Shah
2022-07-08  1:39 ` [PATCH v9 5/6] firmware: xilinx: Add RPU configuration APIs Tanmay Shah
2022-07-08  1:39   ` Tanmay Shah
2022-07-08  1:39 ` [PATCH v9 6/6] drivers: remoteproc: Add Xilinx r5 remoteproc driver Tanmay Shah
2022-07-08  1:39   ` Tanmay Shah
2022-07-08 19:38   ` kernel test robot
2022-07-08 19:38     ` kernel test robot
2022-09-01 20:25   ` Mathieu Poirier
2022-09-01 20:25     ` Mathieu Poirier
2022-09-02  0:04     ` Tanmay Shah
2022-09-02  0:04       ` Tanmay Shah
2022-09-02 19:59       ` Mathieu Poirier
2022-09-02 19:59         ` Mathieu Poirier
2022-09-08 19:42         ` Tanmay Shah
2022-09-08 19:42           ` Tanmay Shah
2022-09-02  0:06     ` Tanmay Shah
2022-09-02  0:06       ` Tanmay Shah
2022-09-26 22:02     ` Tanmay Shah
2022-09-26 22:02       ` Tanmay Shah
2022-09-29 17:22       ` Mathieu Poirier [this message]
2022-09-29 17:22         ` Mathieu Poirier
2022-09-29 19:28         ` Tanmay Shah
2022-09-29 19:28           ` Tanmay Shah
2022-09-29 23:20           ` Mathieu Poirier
2022-09-29 23:20             ` Mathieu Poirier
2022-09-06 21:07   ` Mathieu Poirier
2022-09-06 21:07     ` Mathieu Poirier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220929172200.GB3107608@p14s \
    --to=mathieu.poirier@linaro.org \
    --cc=andersson@kernel.org \
    --cc=ben.levinsky@xilinx.com \
    --cc=devicetree@vger.kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=michal.simek@amd.com \
    --cc=michal.simek@xilinx.com \
    --cc=robh+dt@kernel.org \
    --cc=tanmay.shah@xilinx.com \
    --cc=tanmays@amd.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.