From: Hal Feng <hal.feng@linux.starfivetech.com>
To: linux-riscv@lists.infradead.org, devicetree@vger.kernel.org,
linux-clk@vger.kernel.org, linux-gpio@vger.kernel.org
Cc: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Paul Walmsley <paul.walmsley@sifive.com>,
Palmer Dabbelt <palmer@dabbelt.com>,
Albert Ou <aou@eecs.berkeley.edu>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Thomas Gleixner <tglx@linutronix.de>,
Marc Zyngier <maz@kernel.org>,
Philipp Zabel <p.zabel@pengutronix.de>,
Stephen Boyd <sboyd@kernel.org>,
Michael Turquette <mturquette@baylibre.com>,
Linus Walleij <linus.walleij@linaro.org>,
Emil Renner Berthing <kernel@esmil.dk>,
Hal Feng <hal.feng@linux.starfivetech.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH v1 27/30] RISC-V: Add initial StarFive JH7110 device tree
Date: Fri, 30 Sep 2022 15:49:14 +0800 [thread overview]
Message-ID: <20220930074914.6757-1-hal.feng@linux.starfivetech.com> (raw)
In-Reply-To: <20220929143225.17907-1-hal.feng@linux.starfivetech.com>
From: Emil Renner Berthing <kernel@esmil.dk>
Add initial device tree for the JH7110 RISC-V SoC by
StarFive Technology Ltd.
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Signed-off-by: Hal Feng <hal.feng@linux.starfivetech.com>
---
arch/riscv/boot/dts/starfive/jh7110.dtsi | 449 +++++++++++++++++++++++
1 file changed, 449 insertions(+)
create mode 100644 arch/riscv/boot/dts/starfive/jh7110.dtsi
diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
new file mode 100644
index 000000000000..46f418d4198a
--- /dev/null
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -0,0 +1,449 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2022 StarFive Technology Co., Ltd.
+ * Copyright (C) 2022 Emil Renner Berthing <kernel@esmil.dk>
+ */
+
+/dts-v1/;
+#include <dt-bindings/clock/starfive-jh7110-sys.h>
+#include <dt-bindings/clock/starfive-jh7110-aon.h>
+#include <dt-bindings/reset/starfive-jh7110.h>
+
+/ {
+ compatible = "starfive,jh7110";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ compatible = "sifive,u74-mc", "riscv";
+ reg = <0>;
+ d-cache-block-size = <64>;
+ d-cache-sets = <64>;
+ d-cache-size = <8192>;
+ d-tlb-sets = <1>;
+ d-tlb-size = <40>;
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <64>;
+ i-cache-size = <16384>;
+ i-tlb-sets = <1>;
+ i-tlb-size = <40>;
+ mmu-type = "riscv,sv39";
+ next-level-cache = <&ccache>;
+ riscv,isa = "rv64imac";
+ tlb-split;
+ status = "disabled";
+
+ cpu0_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ cpu1: cpu@1 {
+ compatible = "sifive,u74-mc", "riscv";
+ reg = <1>;
+ d-cache-block-size = <64>;
+ d-cache-sets = <64>;
+ d-cache-size = <32768>;
+ d-tlb-sets = <1>;
+ d-tlb-size = <40>;
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <64>;
+ i-cache-size = <32768>;
+ i-tlb-sets = <1>;
+ i-tlb-size = <40>;
+ mmu-type = "riscv,sv39";
+ next-level-cache = <&ccache>;
+ riscv,isa = "rv64imafdc";
+ tlb-split;
+
+ cpu1_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ cpu2: cpu@2 {
+ compatible = "sifive,u74-mc", "riscv";
+ reg = <2>;
+ d-cache-block-size = <64>;
+ d-cache-sets = <64>;
+ d-cache-size = <32768>;
+ d-tlb-sets = <1>;
+ d-tlb-size = <40>;
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <64>;
+ i-cache-size = <32768>;
+ i-tlb-sets = <1>;
+ i-tlb-size = <40>;
+ mmu-type = "riscv,sv39";
+ next-level-cache = <&ccache>;
+ riscv,isa = "rv64imafdc";
+ tlb-split;
+
+ cpu2_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ cpu3: cpu@3 {
+ compatible = "sifive,u74-mc", "riscv";
+ reg = <3>;
+ d-cache-block-size = <64>;
+ d-cache-sets = <64>;
+ d-cache-size = <32768>;
+ d-tlb-sets = <1>;
+ d-tlb-size = <40>;
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <64>;
+ i-cache-size = <32768>;
+ i-tlb-sets = <1>;
+ i-tlb-size = <40>;
+ mmu-type = "riscv,sv39";
+ next-level-cache = <&ccache>;
+ riscv,isa = "rv64imafdc";
+ tlb-split;
+
+ cpu3_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ cpu4: cpu@4 {
+ compatible = "sifive,u74-mc", "riscv";
+ reg = <4>;
+ d-cache-block-size = <64>;
+ d-cache-sets = <64>;
+ d-cache-size = <32768>;
+ d-tlb-sets = <1>;
+ d-tlb-size = <40>;
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <64>;
+ i-cache-size = <32768>;
+ i-tlb-sets = <1>;
+ i-tlb-size = <40>;
+ mmu-type = "riscv,sv39";
+ next-level-cache = <&ccache>;
+ riscv,isa = "rv64imafdc";
+ tlb-split;
+
+ cpu4_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+
+ core1 {
+ cpu = <&cpu1>;
+ };
+
+ core2 {
+ cpu = <&cpu2>;
+ };
+
+ core3 {
+ cpu = <&cpu3>;
+ };
+
+ core4 {
+ cpu = <&cpu4>;
+ };
+ };
+ };
+ };
+
+ osc: osc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ };
+
+ clk_rtc: clk_rtc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ };
+
+ gmac0_rmii_refin: gmac0_rmii_refin {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ };
+
+ gmac0_rgmii_rxin: gmac0_rgmii_rxin {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <125000000>;
+ };
+
+ gmac1_rmii_refin: gmac1_rmii_refin {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ };
+
+ gmac1_rgmii_rxin: gmac1_rgmii_rxin {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <125000000>;
+ };
+
+ i2stx_bclk_ext: i2stx_bclk_ext {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <12288000>;
+ };
+
+ i2stx_lrck_ext: i2stx_lrck_ext {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <192000>;
+ };
+
+ i2srx_bclk_ext: i2srx_bclk_ext {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <12288000>;
+ };
+
+ i2srx_lrck_ext: i2srx_lrck_ext {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <192000>;
+ };
+
+ tdm_ext: tdm_ext {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <49152000>;
+ };
+
+ mclk_ext: mclk_ext {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <49152000>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ interrupt-parent = <&plic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clint: clint@2000000 {
+ compatible = "starfive,jh7110-clint", "sifive,clint0";
+ reg = <0x0 0x2000000 0x0 0x10000>;
+ interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
+ <&cpu1_intc 3>, <&cpu1_intc 7>,
+ <&cpu2_intc 3>, <&cpu2_intc 7>,
+ <&cpu3_intc 3>, <&cpu3_intc 7>,
+ <&cpu4_intc 3>, <&cpu4_intc 7>;
+ };
+
+ plic: plic@c000000 {
+ compatible = "starfive,jh7110-plic", "sifive,plic-1.0.0";
+ reg = <0x0 0xc000000 0x0 0x4000000>;
+ interrupts-extended = <&cpu0_intc 11>,
+ <&cpu1_intc 11>, <&cpu1_intc 9>,
+ <&cpu2_intc 11>, <&cpu2_intc 9>,
+ <&cpu3_intc 11>, <&cpu3_intc 9>,
+ <&cpu4_intc 11>, <&cpu4_intc 9>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ riscv,ndev = <136>;
+ };
+
+ ccache: cache-controller@2010000 {
+ compatible = "starfive,jh7110-ccache", "cache";
+ reg = <0x0 0x2010000 0x0 0x4000>;
+ interrupts = <1>, <3>, <4>, <2>;
+ cache-block-size = <64>;
+ cache-level = <2>;
+ cache-sets = <2048>;
+ cache-size = <2097152>;
+ cache-unified;
+ };
+
+ syscrg: syscrg@13020000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x0 0x13020000 0x0 0x10000>;
+
+ syscrg_clk: clock-controller@13020000 {
+ compatible = "starfive,jh7110-clkgen-sys";
+ clocks = <&osc>, <&gmac1_rmii_refin>,
+ <&gmac1_rgmii_rxin>,
+ <&i2stx_bclk_ext>, <&i2stx_lrck_ext>,
+ <&i2srx_bclk_ext>, <&i2srx_lrck_ext>,
+ <&tdm_ext>, <&mclk_ext>;
+ clock-names = "osc", "gmac1_rmii_refin",
+ "gmac1_rgmii_rxin",
+ "i2stx_bclk_ext", "i2stx_lrck_ext",
+ "i2srx_bclk_ext", "i2srx_lrck_ext",
+ "tdm_ext", "mclk_ext";
+ #clock-cells = <1>;
+ };
+
+ syscrg_rst: reset-controller@13020000 {
+ compatible = "starfive,jh7110-reset";
+ #reset-cells = <1>;
+ starfive,assert-offset = <0x2F8>;
+ starfive,status-offset= <0x308>;
+ starfive,nr-resets = <JH7110_SYSRST_END>;
+ };
+ };
+
+ aoncrg: aoncrg@17000000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x0 0x17000000 0x0 0x10000>;
+
+ aoncrg_clk: clock-controller@17000000 {
+ compatible = "starfive,jh7110-clkgen-aon";
+ clocks = <&osc>, <&clk_rtc>,
+ <&gmac0_rmii_refin>, <&gmac0_rgmii_rxin>,
+ <&syscrg_clk JH7110_SYSCLK_STG_AXIAHB>,
+ <&syscrg_clk JH7110_SYSCLK_APB_BUS_FUNC>;
+ clock-names = "osc", "clk_rtc",
+ "gmac0_rmii_refin", "gmac0_rgmii_rxin",
+ "stg_axiahb", "apb_bus_func";
+ #clock-cells = <1>;
+ };
+
+ aoncrg_rst: reset-controller@17000000 {
+ compatible = "starfive,jh7110-reset";
+ #reset-cells = <1>;
+ starfive,assert-offset = <0x38>;
+ starfive,status-offset= <0x3C>;
+ starfive,nr-resets = <JH7110_AONRST_END>;
+ };
+ };
+
+ gpio: gpio@13040000 {
+ compatible = "starfive,jh7110-sys-pinctrl";
+ reg = <0x0 0x13040000 0x0 0x10000>;
+ reg-names = "control";
+ clocks = <&syscrg_clk JH7110_SYSCLK_IOMUX>;
+ resets = <&syscrg_rst JH7110_SYSRST_IOMUX>;
+ interrupts = <86>;
+ interrupt-controller;
+ #gpio-cells = <2>;
+ ngpios = <64>;
+ };
+
+ gpioa: gpio@17020000 {
+ compatible = "starfive,jh7110-aon-pinctrl";
+ reg = <0x0 0x17020000 0x0 0x10000>;
+ reg-names = "control";
+ resets = <&aoncrg_rst JH7110_AONRST_AON_IOMUX>;
+ interrupts = <85>;
+ interrupt-controller;
+ #gpio-cells = <2>;
+ ngpios = <4>;
+ };
+
+ uart0: serial@10000000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x10000000 0x0 0x10000>;
+ clocks = <&syscrg_clk JH7110_SYSCLK_UART0_CORE>,
+ <&syscrg_clk JH7110_SYSCLK_UART0_APB>;
+ clock-names = "baudclk", "apb_pclk";
+ resets = <&syscrg_rst JH7110_SYSRST_UART0_APB>,
+ <&syscrg_rst JH7110_SYSRST_UART0_CORE>;
+ interrupts = <32>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ uart1: serial@10010000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x10010000 0x0 0x10000>;
+ clocks = <&syscrg_clk JH7110_SYSCLK_UART1_CORE>,
+ <&syscrg_clk JH7110_SYSCLK_UART1_APB>;
+ clock-names = "baudclk", "apb_pclk";
+ resets = <&syscrg_rst JH7110_SYSRST_UART1_APB>,
+ <&syscrg_rst JH7110_SYSRST_UART1_CORE>;
+ interrupts = <33>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ uart2: serial@10020000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x10020000 0x0 0x10000>;
+ clocks = <&syscrg_clk JH7110_SYSCLK_UART2_CORE>,
+ <&syscrg_clk JH7110_SYSCLK_UART2_APB>;
+ clock-names = "baudclk", "apb_pclk";
+ resets = <&syscrg_rst JH7110_SYSRST_UART2_APB>,
+ <&syscrg_rst JH7110_SYSRST_UART2_CORE>;
+ interrupts = <34>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ uart3: serial@12000000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x12000000 0x0 0x10000>;
+ clocks = <&syscrg_clk JH7110_SYSCLK_UART3_CORE>,
+ <&syscrg_clk JH7110_SYSCLK_UART3_APB>;
+ clock-names = "baudclk", "apb_pclk";
+ resets = <&syscrg_rst JH7110_SYSRST_UART3_APB>,
+ <&syscrg_rst JH7110_SYSRST_UART3_CORE>;
+ interrupts = <45>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ uart4: serial@12010000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x12010000 0x0 0x10000>;
+ clocks = <&syscrg_clk JH7110_SYSCLK_UART4_CORE>,
+ <&syscrg_clk JH7110_SYSCLK_UART4_APB>;
+ clock-names = "baudclk", "apb_pclk";
+ resets = <&syscrg_rst JH7110_SYSRST_UART4_APB>,
+ <&syscrg_rst JH7110_SYSRST_UART4_CORE>;
+ interrupts = <46>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ uart5: serial@12020000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x12020000 0x0 0x10000>;
+ clocks = <&syscrg_clk JH7110_SYSCLK_UART5_CORE>,
+ <&syscrg_clk JH7110_SYSCLK_UART5_APB>;
+ clock-names = "baudclk", "apb_pclk";
+ resets = <&syscrg_rst JH7110_SYSRST_UART5_APB>,
+ <&syscrg_rst JH7110_SYSRST_UART5_CORE>;
+ interrupts = <47>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+ };
+};
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Hal Feng <hal.feng@linux.starfivetech.com>
To: linux-riscv@lists.infradead.org, devicetree@vger.kernel.org,
linux-clk@vger.kernel.org, linux-gpio@vger.kernel.org
Cc: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Paul Walmsley <paul.walmsley@sifive.com>,
Palmer Dabbelt <palmer@dabbelt.com>,
Albert Ou <aou@eecs.berkeley.edu>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Thomas Gleixner <tglx@linutronix.de>,
Marc Zyngier <maz@kernel.org>,
Philipp Zabel <p.zabel@pengutronix.de>,
Stephen Boyd <sboyd@kernel.org>,
Michael Turquette <mturquette@baylibre.com>,
Linus Walleij <linus.walleij@linaro.org>,
Emil Renner Berthing <kernel@esmil.dk>,
Hal Feng <hal.feng@linux.starfivetech.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH v1 27/30] RISC-V: Add initial StarFive JH7110 device tree
Date: Fri, 30 Sep 2022 15:49:14 +0800 [thread overview]
Message-ID: <20220930074914.6757-1-hal.feng@linux.starfivetech.com> (raw)
In-Reply-To: <20220929143225.17907-1-hal.feng@linux.starfivetech.com>
From: Emil Renner Berthing <kernel@esmil.dk>
Add initial device tree for the JH7110 RISC-V SoC by
StarFive Technology Ltd.
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Signed-off-by: Hal Feng <hal.feng@linux.starfivetech.com>
---
arch/riscv/boot/dts/starfive/jh7110.dtsi | 449 +++++++++++++++++++++++
1 file changed, 449 insertions(+)
create mode 100644 arch/riscv/boot/dts/starfive/jh7110.dtsi
diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
new file mode 100644
index 000000000000..46f418d4198a
--- /dev/null
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -0,0 +1,449 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2022 StarFive Technology Co., Ltd.
+ * Copyright (C) 2022 Emil Renner Berthing <kernel@esmil.dk>
+ */
+
+/dts-v1/;
+#include <dt-bindings/clock/starfive-jh7110-sys.h>
+#include <dt-bindings/clock/starfive-jh7110-aon.h>
+#include <dt-bindings/reset/starfive-jh7110.h>
+
+/ {
+ compatible = "starfive,jh7110";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ compatible = "sifive,u74-mc", "riscv";
+ reg = <0>;
+ d-cache-block-size = <64>;
+ d-cache-sets = <64>;
+ d-cache-size = <8192>;
+ d-tlb-sets = <1>;
+ d-tlb-size = <40>;
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <64>;
+ i-cache-size = <16384>;
+ i-tlb-sets = <1>;
+ i-tlb-size = <40>;
+ mmu-type = "riscv,sv39";
+ next-level-cache = <&ccache>;
+ riscv,isa = "rv64imac";
+ tlb-split;
+ status = "disabled";
+
+ cpu0_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ cpu1: cpu@1 {
+ compatible = "sifive,u74-mc", "riscv";
+ reg = <1>;
+ d-cache-block-size = <64>;
+ d-cache-sets = <64>;
+ d-cache-size = <32768>;
+ d-tlb-sets = <1>;
+ d-tlb-size = <40>;
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <64>;
+ i-cache-size = <32768>;
+ i-tlb-sets = <1>;
+ i-tlb-size = <40>;
+ mmu-type = "riscv,sv39";
+ next-level-cache = <&ccache>;
+ riscv,isa = "rv64imafdc";
+ tlb-split;
+
+ cpu1_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ cpu2: cpu@2 {
+ compatible = "sifive,u74-mc", "riscv";
+ reg = <2>;
+ d-cache-block-size = <64>;
+ d-cache-sets = <64>;
+ d-cache-size = <32768>;
+ d-tlb-sets = <1>;
+ d-tlb-size = <40>;
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <64>;
+ i-cache-size = <32768>;
+ i-tlb-sets = <1>;
+ i-tlb-size = <40>;
+ mmu-type = "riscv,sv39";
+ next-level-cache = <&ccache>;
+ riscv,isa = "rv64imafdc";
+ tlb-split;
+
+ cpu2_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ cpu3: cpu@3 {
+ compatible = "sifive,u74-mc", "riscv";
+ reg = <3>;
+ d-cache-block-size = <64>;
+ d-cache-sets = <64>;
+ d-cache-size = <32768>;
+ d-tlb-sets = <1>;
+ d-tlb-size = <40>;
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <64>;
+ i-cache-size = <32768>;
+ i-tlb-sets = <1>;
+ i-tlb-size = <40>;
+ mmu-type = "riscv,sv39";
+ next-level-cache = <&ccache>;
+ riscv,isa = "rv64imafdc";
+ tlb-split;
+
+ cpu3_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ cpu4: cpu@4 {
+ compatible = "sifive,u74-mc", "riscv";
+ reg = <4>;
+ d-cache-block-size = <64>;
+ d-cache-sets = <64>;
+ d-cache-size = <32768>;
+ d-tlb-sets = <1>;
+ d-tlb-size = <40>;
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <64>;
+ i-cache-size = <32768>;
+ i-tlb-sets = <1>;
+ i-tlb-size = <40>;
+ mmu-type = "riscv,sv39";
+ next-level-cache = <&ccache>;
+ riscv,isa = "rv64imafdc";
+ tlb-split;
+
+ cpu4_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+
+ core1 {
+ cpu = <&cpu1>;
+ };
+
+ core2 {
+ cpu = <&cpu2>;
+ };
+
+ core3 {
+ cpu = <&cpu3>;
+ };
+
+ core4 {
+ cpu = <&cpu4>;
+ };
+ };
+ };
+ };
+
+ osc: osc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ };
+
+ clk_rtc: clk_rtc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ };
+
+ gmac0_rmii_refin: gmac0_rmii_refin {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ };
+
+ gmac0_rgmii_rxin: gmac0_rgmii_rxin {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <125000000>;
+ };
+
+ gmac1_rmii_refin: gmac1_rmii_refin {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ };
+
+ gmac1_rgmii_rxin: gmac1_rgmii_rxin {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <125000000>;
+ };
+
+ i2stx_bclk_ext: i2stx_bclk_ext {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <12288000>;
+ };
+
+ i2stx_lrck_ext: i2stx_lrck_ext {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <192000>;
+ };
+
+ i2srx_bclk_ext: i2srx_bclk_ext {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <12288000>;
+ };
+
+ i2srx_lrck_ext: i2srx_lrck_ext {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <192000>;
+ };
+
+ tdm_ext: tdm_ext {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <49152000>;
+ };
+
+ mclk_ext: mclk_ext {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <49152000>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ interrupt-parent = <&plic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clint: clint@2000000 {
+ compatible = "starfive,jh7110-clint", "sifive,clint0";
+ reg = <0x0 0x2000000 0x0 0x10000>;
+ interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
+ <&cpu1_intc 3>, <&cpu1_intc 7>,
+ <&cpu2_intc 3>, <&cpu2_intc 7>,
+ <&cpu3_intc 3>, <&cpu3_intc 7>,
+ <&cpu4_intc 3>, <&cpu4_intc 7>;
+ };
+
+ plic: plic@c000000 {
+ compatible = "starfive,jh7110-plic", "sifive,plic-1.0.0";
+ reg = <0x0 0xc000000 0x0 0x4000000>;
+ interrupts-extended = <&cpu0_intc 11>,
+ <&cpu1_intc 11>, <&cpu1_intc 9>,
+ <&cpu2_intc 11>, <&cpu2_intc 9>,
+ <&cpu3_intc 11>, <&cpu3_intc 9>,
+ <&cpu4_intc 11>, <&cpu4_intc 9>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ riscv,ndev = <136>;
+ };
+
+ ccache: cache-controller@2010000 {
+ compatible = "starfive,jh7110-ccache", "cache";
+ reg = <0x0 0x2010000 0x0 0x4000>;
+ interrupts = <1>, <3>, <4>, <2>;
+ cache-block-size = <64>;
+ cache-level = <2>;
+ cache-sets = <2048>;
+ cache-size = <2097152>;
+ cache-unified;
+ };
+
+ syscrg: syscrg@13020000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x0 0x13020000 0x0 0x10000>;
+
+ syscrg_clk: clock-controller@13020000 {
+ compatible = "starfive,jh7110-clkgen-sys";
+ clocks = <&osc>, <&gmac1_rmii_refin>,
+ <&gmac1_rgmii_rxin>,
+ <&i2stx_bclk_ext>, <&i2stx_lrck_ext>,
+ <&i2srx_bclk_ext>, <&i2srx_lrck_ext>,
+ <&tdm_ext>, <&mclk_ext>;
+ clock-names = "osc", "gmac1_rmii_refin",
+ "gmac1_rgmii_rxin",
+ "i2stx_bclk_ext", "i2stx_lrck_ext",
+ "i2srx_bclk_ext", "i2srx_lrck_ext",
+ "tdm_ext", "mclk_ext";
+ #clock-cells = <1>;
+ };
+
+ syscrg_rst: reset-controller@13020000 {
+ compatible = "starfive,jh7110-reset";
+ #reset-cells = <1>;
+ starfive,assert-offset = <0x2F8>;
+ starfive,status-offset= <0x308>;
+ starfive,nr-resets = <JH7110_SYSRST_END>;
+ };
+ };
+
+ aoncrg: aoncrg@17000000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x0 0x17000000 0x0 0x10000>;
+
+ aoncrg_clk: clock-controller@17000000 {
+ compatible = "starfive,jh7110-clkgen-aon";
+ clocks = <&osc>, <&clk_rtc>,
+ <&gmac0_rmii_refin>, <&gmac0_rgmii_rxin>,
+ <&syscrg_clk JH7110_SYSCLK_STG_AXIAHB>,
+ <&syscrg_clk JH7110_SYSCLK_APB_BUS_FUNC>;
+ clock-names = "osc", "clk_rtc",
+ "gmac0_rmii_refin", "gmac0_rgmii_rxin",
+ "stg_axiahb", "apb_bus_func";
+ #clock-cells = <1>;
+ };
+
+ aoncrg_rst: reset-controller@17000000 {
+ compatible = "starfive,jh7110-reset";
+ #reset-cells = <1>;
+ starfive,assert-offset = <0x38>;
+ starfive,status-offset= <0x3C>;
+ starfive,nr-resets = <JH7110_AONRST_END>;
+ };
+ };
+
+ gpio: gpio@13040000 {
+ compatible = "starfive,jh7110-sys-pinctrl";
+ reg = <0x0 0x13040000 0x0 0x10000>;
+ reg-names = "control";
+ clocks = <&syscrg_clk JH7110_SYSCLK_IOMUX>;
+ resets = <&syscrg_rst JH7110_SYSRST_IOMUX>;
+ interrupts = <86>;
+ interrupt-controller;
+ #gpio-cells = <2>;
+ ngpios = <64>;
+ };
+
+ gpioa: gpio@17020000 {
+ compatible = "starfive,jh7110-aon-pinctrl";
+ reg = <0x0 0x17020000 0x0 0x10000>;
+ reg-names = "control";
+ resets = <&aoncrg_rst JH7110_AONRST_AON_IOMUX>;
+ interrupts = <85>;
+ interrupt-controller;
+ #gpio-cells = <2>;
+ ngpios = <4>;
+ };
+
+ uart0: serial@10000000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x10000000 0x0 0x10000>;
+ clocks = <&syscrg_clk JH7110_SYSCLK_UART0_CORE>,
+ <&syscrg_clk JH7110_SYSCLK_UART0_APB>;
+ clock-names = "baudclk", "apb_pclk";
+ resets = <&syscrg_rst JH7110_SYSRST_UART0_APB>,
+ <&syscrg_rst JH7110_SYSRST_UART0_CORE>;
+ interrupts = <32>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ uart1: serial@10010000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x10010000 0x0 0x10000>;
+ clocks = <&syscrg_clk JH7110_SYSCLK_UART1_CORE>,
+ <&syscrg_clk JH7110_SYSCLK_UART1_APB>;
+ clock-names = "baudclk", "apb_pclk";
+ resets = <&syscrg_rst JH7110_SYSRST_UART1_APB>,
+ <&syscrg_rst JH7110_SYSRST_UART1_CORE>;
+ interrupts = <33>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ uart2: serial@10020000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x10020000 0x0 0x10000>;
+ clocks = <&syscrg_clk JH7110_SYSCLK_UART2_CORE>,
+ <&syscrg_clk JH7110_SYSCLK_UART2_APB>;
+ clock-names = "baudclk", "apb_pclk";
+ resets = <&syscrg_rst JH7110_SYSRST_UART2_APB>,
+ <&syscrg_rst JH7110_SYSRST_UART2_CORE>;
+ interrupts = <34>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ uart3: serial@12000000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x12000000 0x0 0x10000>;
+ clocks = <&syscrg_clk JH7110_SYSCLK_UART3_CORE>,
+ <&syscrg_clk JH7110_SYSCLK_UART3_APB>;
+ clock-names = "baudclk", "apb_pclk";
+ resets = <&syscrg_rst JH7110_SYSRST_UART3_APB>,
+ <&syscrg_rst JH7110_SYSRST_UART3_CORE>;
+ interrupts = <45>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ uart4: serial@12010000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x12010000 0x0 0x10000>;
+ clocks = <&syscrg_clk JH7110_SYSCLK_UART4_CORE>,
+ <&syscrg_clk JH7110_SYSCLK_UART4_APB>;
+ clock-names = "baudclk", "apb_pclk";
+ resets = <&syscrg_rst JH7110_SYSRST_UART4_APB>,
+ <&syscrg_rst JH7110_SYSRST_UART4_CORE>;
+ interrupts = <46>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ uart5: serial@12020000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x12020000 0x0 0x10000>;
+ clocks = <&syscrg_clk JH7110_SYSCLK_UART5_CORE>,
+ <&syscrg_clk JH7110_SYSCLK_UART5_APB>;
+ clock-names = "baudclk", "apb_pclk";
+ resets = <&syscrg_rst JH7110_SYSRST_UART5_APB>,
+ <&syscrg_rst JH7110_SYSRST_UART5_CORE>;
+ interrupts = <47>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+ };
+};
--
2.17.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
next prev parent reply other threads:[~2022-09-30 7:51 UTC|newest]
Thread overview: 210+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-29 14:31 [PATCH v1 00/30] Basic StarFive JH7110 RISC-V SoC support Hal Feng
2022-09-29 14:31 ` Hal Feng
2022-09-29 14:31 ` [PATCH v1 01/30] dt-bindings: riscv: Add StarFive JH7110 bindings Hal Feng
2022-09-29 14:31 ` Hal Feng
2022-09-29 14:34 ` Krzysztof Kozlowski
2022-09-29 14:34 ` Krzysztof Kozlowski
2022-10-08 3:44 ` Hal Feng
2022-10-08 3:44 ` Hal Feng
2022-09-29 14:31 ` [PATCH v1 02/30] dt-bindings: timer: Add StarFive JH7110 clint Hal Feng
2022-09-29 14:31 ` Hal Feng
2022-09-29 14:34 ` Krzysztof Kozlowski
2022-09-29 14:34 ` Krzysztof Kozlowski
2022-09-29 14:31 ` [PATCH v1 03/30] dt-bindings: interrupt-controller: Add StarFive JH7110 plic Hal Feng
2022-09-29 14:31 ` Hal Feng
2022-09-29 14:35 ` Krzysztof Kozlowski
2022-09-29 14:35 ` Krzysztof Kozlowski
2022-09-29 14:31 ` [PATCH v1 04/30] dt-bindings: sifive-l2-cache: Support StarFive JH71x0 SoCs Hal Feng
2022-09-29 14:31 ` Hal Feng
2022-09-29 14:36 ` Krzysztof Kozlowski
2022-09-29 14:36 ` Krzysztof Kozlowski
2022-09-29 15:33 ` Conor Dooley
2022-09-29 15:33 ` Conor Dooley
2022-10-03 9:26 ` Ben Dooks
2022-10-03 9:26 ` Ben Dooks
2022-10-08 18:54 ` Hal Feng
2022-10-08 18:54 ` Hal Feng
2022-09-29 14:32 ` [PATCH v1 05/30] soc: sifive: l2 cache: Convert to platform driver Hal Feng
2022-09-29 14:32 ` Hal Feng
2022-09-29 15:32 ` Conor Dooley
2022-09-29 15:32 ` Conor Dooley
2022-09-29 17:57 ` Ben Dooks
2022-09-29 17:57 ` Ben Dooks
2022-10-05 13:44 ` Emil Renner Berthing
2022-10-05 13:44 ` Emil Renner Berthing
2022-10-05 13:48 ` Ben Dooks
2022-10-05 13:48 ` Ben Dooks
2022-10-05 13:55 ` Emil Renner Berthing
2022-10-05 13:55 ` Emil Renner Berthing
2022-10-05 14:05 ` Conor Dooley
2022-10-05 14:05 ` Conor Dooley
2022-10-08 18:07 ` Hal Feng
2022-10-08 18:07 ` Hal Feng
2022-09-29 14:32 ` [PATCH v1 06/30] soc: sifive: l2 cache: Add StarFive JH71x0 support Hal Feng
2022-09-29 14:32 ` Hal Feng
2022-09-29 14:32 ` [PATCH v1 07/30] reset: starfive: jh7100: Use 32bit I/O on 32bit registers Hal Feng
2022-09-29 14:32 ` Hal Feng
2022-09-29 14:32 ` [PATCH v1 08/30] reset: starfive: jh7100: Use regmap APIs to operate registers Hal Feng
2022-09-29 14:32 ` Hal Feng
2022-09-29 14:32 ` [PATCH v1 09/30] reset: starfive: jh7100: Move necessary properties to device tree Hal Feng
2022-09-29 14:32 ` Hal Feng
2022-09-30 20:49 ` Rob Herring
2022-09-30 20:49 ` Rob Herring
2022-10-05 13:20 ` Emil Renner Berthing
2022-10-05 13:20 ` Emil Renner Berthing
2022-09-29 14:32 ` [PATCH v1 10/30] reset: starfive: Rename 'reset-starfive-jh7100.c' to 'reset-starfive.c' Hal Feng
2022-09-29 14:32 ` Hal Feng
2022-09-29 14:45 ` [PATCH v1 00/30] Basic StarFive JH7110 RISC-V SoC support Krzysztof Kozlowski
2022-09-29 14:45 ` Krzysztof Kozlowski
2022-09-29 17:59 ` Conor Dooley
2022-09-29 17:59 ` Conor Dooley
2022-10-01 1:13 ` hal.feng
2022-10-01 1:13 ` hal.feng
2022-09-29 16:35 ` [PATCH v1 11/30] dt-bindings: reset: Add StarFive JH7110 reset definitions Hal Feng
2022-09-29 16:35 ` Hal Feng
2022-09-29 17:51 ` [PATCH v1 12/30] dt-bindings: reset: Add starfive,jh7110-reset bindings Hal Feng
2022-09-29 17:51 ` Hal Feng
2022-09-29 18:21 ` Rob Herring
2022-09-29 18:21 ` Rob Herring
2022-09-29 18:40 ` Rob Herring
2022-09-29 18:40 ` Rob Herring
2022-09-29 18:43 ` Rob Herring
2022-09-29 18:43 ` Rob Herring
2022-10-11 15:30 ` Hal Feng
2022-10-11 15:30 ` Hal Feng
2022-10-11 16:36 ` Krzysztof Kozlowski
2022-10-11 16:36 ` Krzysztof Kozlowski
2022-10-12 13:16 ` Hal Feng
2022-10-12 13:16 ` Hal Feng
2022-10-12 13:33 ` Krzysztof Kozlowski
2022-10-12 13:33 ` Krzysztof Kozlowski
2022-10-12 14:05 ` Conor Dooley
2022-10-12 14:05 ` Conor Dooley
2022-10-12 15:21 ` Hal Feng
2022-10-12 15:21 ` Hal Feng
2022-10-12 14:53 ` Hal Feng
2022-10-12 14:53 ` Hal Feng
2022-10-12 8:01 ` Emil Renner Berthing
2022-10-12 8:01 ` Emil Renner Berthing
2022-09-29 17:53 ` [PATCH v1 13/30] reset: starfive: Add StarFive JH7110 SoC support Hal Feng
2022-09-29 17:53 ` Hal Feng
2022-09-29 17:54 ` [PATCH v1 14/30] clk: starfive: Factor out common clock driver code Hal Feng
2022-09-29 17:54 ` Hal Feng
2022-09-30 21:43 ` Stephen Boyd
2022-09-30 21:43 ` Stephen Boyd
2022-09-29 17:56 ` [PATCH v1 15/30] clk: starfive: Use regmap APIs to operate registers Hal Feng
2022-09-29 17:56 ` Hal Feng
2022-09-30 21:48 ` Stephen Boyd
2022-09-30 21:48 ` Stephen Boyd
2022-10-05 13:14 ` Emil Renner Berthing
2022-10-05 13:14 ` Emil Renner Berthing
2022-10-12 23:05 ` Stephen Boyd
2022-10-12 23:05 ` Stephen Boyd
2022-10-23 4:11 ` Hal Feng
2022-10-23 4:11 ` Hal Feng
2022-10-23 10:25 ` Conor Dooley
2022-10-23 10:25 ` Conor Dooley
2022-10-28 3:16 ` Hal Feng
2022-10-28 3:16 ` Hal Feng
2022-10-27 1:26 ` Stephen Boyd
2022-10-27 1:26 ` Stephen Boyd
2022-10-28 2:46 ` Hal Feng
2022-10-28 2:46 ` Hal Feng
2022-09-29 17:56 ` [PATCH v1 16/30] dt-bindings: clock: Add StarFive JH7110 system clock definitions Hal Feng
2022-09-29 17:56 ` Hal Feng
2022-09-29 22:26 ` [PATCH v1 17/30] dt-bindings: clock: Add starfive,jh7110-clkgen-sys bindings Hal Feng
2022-09-29 22:26 ` Hal Feng
2022-09-30 1:55 ` Rob Herring
2022-09-30 1:55 ` Rob Herring
2022-09-30 10:58 ` Krzysztof Kozlowski
2022-09-30 10:58 ` Krzysztof Kozlowski
2022-10-11 17:52 ` Hal Feng
2022-10-11 17:52 ` Hal Feng
2022-09-30 1:50 ` [PATCH v1 18/30] clk: starfive: Add StarFive JH7110 system clock driver Hal Feng
2022-09-30 1:50 ` Hal Feng
2022-09-30 5:49 ` [PATCH v1 19/30] dt-bindings: clock: Add StarFive JH7110 always-on definitions Hal Feng
2022-09-30 5:49 ` Hal Feng
2022-09-30 5:56 ` [PATCH v1 20/30] dt-bindings: clock: Add starfive,jh7110-clkgen-aon bindings Hal Feng
2022-09-30 5:56 ` Hal Feng
2022-09-30 10:59 ` Krzysztof Kozlowski
2022-09-30 10:59 ` Krzysztof Kozlowski
2022-10-11 18:01 ` Hal Feng
2022-10-11 18:01 ` Hal Feng
2022-09-30 12:51 ` Rob Herring
2022-09-30 12:51 ` Rob Herring
2022-09-30 6:03 ` [PATCH v1 21/30] clk: starfive: Add StarFive JH7110 always-on clock driver Hal Feng
2022-09-30 6:03 ` Hal Feng
2022-09-30 6:08 ` [PATCH v1 22/30] pinctrl: Create subdirectory for StarFive drivers Hal Feng
2022-09-30 6:08 ` Hal Feng
2022-10-04 8:43 ` Linus Walleij
2022-10-04 8:43 ` Linus Walleij
2022-09-30 6:14 ` [PATCH v1 23/30] pinctrl: starfive: Rename "pinctrl-starfive" to "pinctrl-starfive-jh7100" Hal Feng
2022-09-30 6:14 ` Hal Feng
2022-09-30 21:28 ` Rob Herring
2022-09-30 21:28 ` Rob Herring
2022-10-04 8:48 ` Linus Walleij
2022-10-04 8:48 ` Linus Walleij
2022-10-04 8:58 ` Conor Dooley
2022-10-04 8:58 ` Conor Dooley
2022-10-04 9:13 ` Linus Walleij
2022-10-04 9:13 ` Linus Walleij
2022-10-04 9:21 ` Conor Dooley
2022-10-04 9:21 ` Conor Dooley
2022-10-04 9:24 ` Conor Dooley
2022-10-04 9:24 ` Conor Dooley
2022-10-06 9:07 ` Geert Uytterhoeven
2022-10-06 9:07 ` Geert Uytterhoeven
2022-09-30 7:33 ` [PATCH v1 24/30] dt-bindings: pinctrl: Add StarFive JH7110 pinctrl definitions Hal Feng
2022-09-30 7:33 ` Hal Feng
2022-09-30 11:00 ` Krzysztof Kozlowski
2022-09-30 11:00 ` Krzysztof Kozlowski
2022-09-30 7:38 ` [PATCH v1 25/30] dt-bindings: pinctrl: Add StarFive JH7110 pinctrl bindings Hal Feng
2022-09-30 7:38 ` Hal Feng
2022-09-30 11:05 ` Krzysztof Kozlowski
2022-09-30 11:05 ` Krzysztof Kozlowski
2022-09-30 12:16 ` Rob Herring
2022-09-30 12:16 ` Rob Herring
2022-10-20 7:28 ` Icenowy Zheng
2022-10-20 7:28 ` Icenowy Zheng
2022-09-30 7:43 ` [PATCH v1 26/30] pinctrl: starfive: Add StarFive JH7110 driver Hal Feng
2022-09-30 7:43 ` Hal Feng
2022-10-01 14:35 ` kernel test robot
2022-10-01 14:35 ` kernel test robot
2022-10-04 8:56 ` Linus Walleij
2022-10-04 8:56 ` Linus Walleij
2022-10-05 13:31 ` Emil Renner Berthing
2022-10-05 13:31 ` Emil Renner Berthing
2022-10-14 2:05 ` Hal Feng
2022-10-14 2:05 ` Hal Feng
2022-09-30 7:49 ` Hal Feng [this message]
2022-09-30 7:49 ` [PATCH v1 27/30] RISC-V: Add initial StarFive JH7110 device tree Hal Feng
2022-10-01 10:52 ` Conor Dooley
2022-10-01 10:52 ` Conor Dooley
2022-10-03 7:45 ` Krzysztof Kozlowski
2022-10-03 7:45 ` Krzysztof Kozlowski
2022-10-14 9:41 ` Hal Feng
2022-10-14 9:41 ` Hal Feng
2022-09-30 7:53 ` [PATCH v1 28/30] RISC-V: Add StarFive JH7110 VisionFive2 board " Hal Feng
2022-09-30 7:53 ` Hal Feng
2022-10-01 11:14 ` Conor Dooley
2022-10-01 11:14 ` Conor Dooley
2022-10-29 8:18 ` Hal Feng
2022-10-29 8:18 ` Hal Feng
2022-09-30 9:06 ` [PATCH v1 29/30] RISC-V: defconfig: Enable CONFIG_SERIAL_8250_DW Hal Feng
2022-09-30 9:06 ` Hal Feng
2022-09-30 20:54 ` Ben Dooks
2022-09-30 20:54 ` Ben Dooks
2022-09-30 21:41 ` Conor Dooley
2022-09-30 21:41 ` Conor Dooley
2022-10-14 3:24 ` Hal Feng
2022-10-14 3:24 ` Hal Feng
2022-09-30 12:23 ` [PATCH v1 30/30] RISC-V: Add StarFive JH7100 and JH7110 SoC Kconfig options Hal Feng
2022-09-30 12:23 ` Hal Feng
2022-09-30 12:37 ` Conor Dooley
2022-09-30 12:37 ` Conor Dooley
2022-10-11 18:32 ` Hal Feng
2022-10-11 18:32 ` Hal Feng
2022-10-05 13:05 ` [PATCH v1 00/30] Basic StarFive JH7110 RISC-V SoC support Emil Renner Berthing
2022-10-05 13:05 ` Emil Renner Berthing
2022-10-08 3:18 ` Hal Feng
2022-10-08 3:18 ` Hal Feng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220930074914.6757-1-hal.feng@linux.starfivetech.com \
--to=hal.feng@linux.starfivetech.com \
--cc=aou@eecs.berkeley.edu \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=kernel@esmil.dk \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=maz@kernel.org \
--cc=mturquette@baylibre.com \
--cc=p.zabel@pengutronix.de \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.