From: Arnd Bergmann <arnd@kernel.org>
To: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org, Arnd Bergmann <arnd@arndb.de>,
Dan Williams <dan.j.williams@intel.com>,
Lennert Buytenhek <kernel@wantstofly.org>,
Martin Michlmayr <tbm@cyrius.com>,
linux-i2c@vger.kernel.org
Subject: [PATCH 09/17] ARM: iop32x: remove the platform
Date: Wed, 19 Oct 2022 17:03:31 +0200 [thread overview]
Message-ID: <20221019150410.3851944-9-arnd@kernel.org> (raw)
In-Reply-To: <20221019150410.3851944-1-arnd@kernel.org>
From: Arnd Bergmann <arnd@arndb.de>
This was marked as unused in 5.19 and can now be removed
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Lennert Buytenhek <kernel@wantstofly.org>
Cc: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
MAINTAINERS | 30 ---
arch/arm/Kconfig | 4 +-
arch/arm/Kconfig.debug | 6 +-
arch/arm/Makefile | 1 -
arch/arm/configs/iop32x_defconfig | 126 ---------
arch/arm/kernel/entry-common.S | 15 --
arch/arm/mach-iop32x/Kconfig | 54 ----
arch/arm/mach-iop32x/Makefile | 20 --
arch/arm/mach-iop32x/adma.c | 163 ------------
arch/arm/mach-iop32x/cp6.c | 48 ----
arch/arm/mach-iop32x/em7210.c | 232 -----------------
arch/arm/mach-iop32x/glantank.c | 214 ---------------
arch/arm/mach-iop32x/glantank.h | 12 -
arch/arm/mach-iop32x/gpio-iop32x.h | 11 -
arch/arm/mach-iop32x/hardware.h | 38 ---
arch/arm/mach-iop32x/i2c.c | 92 -------
arch/arm/mach-iop32x/iop3xx.h | 326 -----------------------
arch/arm/mach-iop32x/iq31244.c | 333 ------------------------
arch/arm/mach-iop32x/iq31244.h | 16 --
arch/arm/mach-iop32x/iq80321.c | 192 --------------
arch/arm/mach-iop32x/iq80321.h | 16 --
arch/arm/mach-iop32x/irq.c | 95 -------
arch/arm/mach-iop32x/irqs.h | 48 ----
arch/arm/mach-iop32x/n2100.c | 367 --------------------------
arch/arm/mach-iop32x/n2100.h | 18 --
arch/arm/mach-iop32x/pci.c | 404 -----------------------------
arch/arm/mach-iop32x/pmu.c | 29 ---
arch/arm/mach-iop32x/restart.c | 17 --
arch/arm/mach-iop32x/setup.c | 31 ---
arch/arm/mach-iop32x/time.c | 179 -------------
drivers/i2c/busses/Kconfig | 6 +-
31 files changed, 6 insertions(+), 3137 deletions(-)
delete mode 100644 arch/arm/configs/iop32x_defconfig
delete mode 100644 arch/arm/mach-iop32x/Kconfig
delete mode 100644 arch/arm/mach-iop32x/Makefile
delete mode 100644 arch/arm/mach-iop32x/adma.c
delete mode 100644 arch/arm/mach-iop32x/cp6.c
delete mode 100644 arch/arm/mach-iop32x/em7210.c
delete mode 100644 arch/arm/mach-iop32x/glantank.c
delete mode 100644 arch/arm/mach-iop32x/glantank.h
delete mode 100644 arch/arm/mach-iop32x/gpio-iop32x.h
delete mode 100644 arch/arm/mach-iop32x/hardware.h
delete mode 100644 arch/arm/mach-iop32x/i2c.c
delete mode 100644 arch/arm/mach-iop32x/iop3xx.h
delete mode 100644 arch/arm/mach-iop32x/iq31244.c
delete mode 100644 arch/arm/mach-iop32x/iq31244.h
delete mode 100644 arch/arm/mach-iop32x/iq80321.c
delete mode 100644 arch/arm/mach-iop32x/iq80321.h
delete mode 100644 arch/arm/mach-iop32x/irq.c
delete mode 100644 arch/arm/mach-iop32x/irqs.h
delete mode 100644 arch/arm/mach-iop32x/n2100.c
delete mode 100644 arch/arm/mach-iop32x/n2100.h
delete mode 100644 arch/arm/mach-iop32x/pci.c
delete mode 100644 arch/arm/mach-iop32x/pmu.c
delete mode 100644 arch/arm/mach-iop32x/restart.c
delete mode 100644 arch/arm/mach-iop32x/setup.c
delete mode 100644 arch/arm/mach-iop32x/time.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 89f72dba8e64..da1ff468e27d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2215,21 +2215,6 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-pxa/colibri-pxa270-income.c
-ARM/INTEL IOP32X ARM ARCHITECTURE
-M: Lennert Buytenhek <kernel@wantstofly.org>
-L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S: Maintained
-
-ARM/INTEL IQ81342EX MACHINE SUPPORT
-M: Lennert Buytenhek <kernel@wantstofly.org>
-L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S: Maintained
-
-ARM/INTEL IXDP2850 MACHINE SUPPORT
-M: Lennert Buytenhek <kernel@wantstofly.org>
-L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S: Maintained
-
ARM/INTEL IXP4XX ARM ARCHITECTURE
M: Linus Walleij <linusw@kernel.org>
M: Imre Kaloz <kaloz@openwrt.org>
@@ -2635,11 +2620,6 @@ F: include/dt-bindings/*/qcom*
F: include/linux/*/qcom*
F: include/linux/soc/qcom/
-ARM/RADISYS ENP2611 MACHINE SUPPORT
-M: Lennert Buytenhek <kernel@wantstofly.org>
-L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S: Maintained
-
ARM/RDA MICRO ARCHITECTURE
M: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -2971,11 +2951,6 @@ F: arch/arm64/boot/dts/ti/Makefile
F: arch/arm64/boot/dts/ti/k3-*
F: include/dt-bindings/pinctrl/k3.h
-ARM/THECUS N2100 MACHINE SUPPORT
-M: Lennert Buytenhek <kernel@wantstofly.org>
-L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S: Maintained
-
ARM/TOSA MACHINE SUPPORT
M: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
M: Dirk Opfer <dirk@opfer-online.de>
@@ -10307,11 +10282,6 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git
F: drivers/iommu/intel/
F: include/linux/intel-svm.h
-INTEL IOP-ADMA DMA DRIVER
-R: Dan Williams <dan.j.williams@intel.com>
-S: Odd fixes
-F: drivers/dma/iop-adma.c
-
INTEL IPU3 CSI-2 CIO2 DRIVER
M: Yong Zhi <yong.zhi@intel.com>
M: Sakari Ailus <sakari.ailus@linux.intel.com>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index e58dab0303e6..698d88343e8e 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -280,7 +280,7 @@ config PHYS_OFFSET
default 0x00000000 if ARCH_FOOTBRIDGE
default 0x10000000 if ARCH_OMAP1 || ARCH_RPC
default 0x30000000 if ARCH_S3C24XX
- default 0xa0000000 if ARCH_IOP32X || ARCH_PXA
+ default 0xa0000000 if ARCH_PXA
default 0xc0000000 if ARCH_EP93XX || ARCH_SA1100
default 0
help
@@ -455,8 +455,6 @@ source "arch/arm/mach-hpe/Kconfig"
source "arch/arm/mach-imx/Kconfig"
-source "arch/arm/mach-iop32x/Kconfig"
-
source "arch/arm/mach-ixp4xx/Kconfig"
source "arch/arm/mach-keystone/Kconfig"
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 3b11e1d04625..320c93fabb21 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -1610,7 +1610,7 @@ config DEBUG_UART_PL01X
# Compatibility options for 8250
config DEBUG_UART_8250
- def_bool ARCH_IOP32X || ARCH_IXP4XX || ARCH_RPC
+ def_bool ARCH_IXP4XX || ARCH_RPC
config DEBUG_UART_PHYS
hex "Physical base address of debug UART"
@@ -1720,7 +1720,6 @@ config DEBUG_UART_PHYS
default 0xfcb00000 if DEBUG_HI3620_UART
default 0xfd883000 if DEBUG_ALPINE_UART0
default 0xfe531000 if DEBUG_STIH41X_SBC_ASC1
- default 0xfe800000 if ARCH_IOP32X
default 0xfed32000 if DEBUG_STIH41X_ASC2
default 0xff690000 if DEBUG_RK32_UART2
default 0xffc02000 if DEBUG_SOCFPGA_UART0
@@ -1825,7 +1824,6 @@ config DEBUG_UART_VIRT
default 0xfe018000 if DEBUG_MMP_UART3
default 0xfe100000 if DEBUG_IMX23_UART || DEBUG_IMX28_UART
default 0xfe300000 if DEBUG_BCM_KONA_UART
- default 0xfe800000 if ARCH_IOP32X
default 0xfeb00000 if DEBUG_HI3620_UART || DEBUG_HIX5HD2_UART
default 0xfeb24000 if DEBUG_RK3X_UART0
default 0xfeb26000 if DEBUG_RK3X_UART1
@@ -1867,7 +1865,7 @@ config DEBUG_UART_VIRT
config DEBUG_UART_8250_SHIFT
int "Register offset shift for the 8250 debug UART"
depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
- default 0 if DEBUG_FOOTBRIDGE_COM1 || ARCH_IOP32X || DEBUG_BCM_5301X || \
+ default 0 if DEBUG_FOOTBRIDGE_COM1 || DEBUG_BCM_5301X || \
DEBUG_BCM_HR2 || DEBUG_OMAP7XXUART1 || DEBUG_OMAP7XXUART2 || \
DEBUG_OMAP7XXUART3
default 3 if DEBUG_MSTARV7_PMUART
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index beda22911feb..1a62035d1207 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -179,7 +179,6 @@ machine-$(CONFIG_ARCH_GEMINI) += gemini
machine-$(CONFIG_ARCH_HIGHBANK) += highbank
machine-$(CONFIG_ARCH_HISI) += hisi
machine-$(CONFIG_ARCH_HPE) += hpe
-machine-$(CONFIG_ARCH_IOP32X) += iop32x
machine-$(CONFIG_ARCH_IXP4XX) += ixp4xx
machine-$(CONFIG_ARCH_KEYSTONE) += keystone
machine-$(CONFIG_ARCH_LPC18XX) += lpc18xx
diff --git a/arch/arm/configs/iop32x_defconfig b/arch/arm/configs/iop32x_defconfig
deleted file mode 100644
index 19e30e790d35..000000000000
--- a/arch/arm/configs/iop32x_defconfig
+++ /dev/null
@@ -1,126 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_IOP32X=y
-CONFIG_MACH_GLANTANK=y
-CONFIG_ARCH_IQ80321=y
-CONFIG_ARCH_IQ31244=y
-CONFIG_MACH_N2100=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp cachepolicy=writealloc"
-CONFIG_FPE_NWFPE=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_SLAB=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IPV6=y
-# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_IPV6_SIT is not set
-CONFIG_MTD=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_NBD=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ATA=y
-CONFIG_SATA_SIL=y
-CONFIG_SATA_VITESSE=y
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=y
-CONFIG_MD_RAID0=y
-CONFIG_MD_RAID1=y
-CONFIG_MD_RAID10=y
-CONFIG_MD_RAID456=y
-CONFIG_BLK_DEV_DM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_E100=y
-CONFIG_E1000=y
-CONFIG_R8169=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_IOP3XX=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_EHCI_TT_NEWSCHED=y
-CONFIG_USB_UHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_RS5C372=y
-CONFIG_DMADEVICES=y
-CONFIG_INTEL_IOP_ADMA=y
-CONFIG_NET_DMA=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_TMPFS=y
-CONFIG_ECRYPT_FS=y
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_KEYS=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_LRW=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=y
-CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_TGR192=y
-CONFIG_CRYPTO_WP512=y
-CONFIG_CRYPTO_AES=y
-CONFIG_CRYPTO_ANUBIS=y
-CONFIG_CRYPTO_ARC4=y
-CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_CAST5=y
-CONFIG_CRYPTO_CAST6=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_KHAZAD=y
-CONFIG_CRYPTO_SERPENT=y
-CONFIG_CRYPTO_TEA=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_LIBCRC32C=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_LL_UART_8250=y
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 405a607b754f..03d4c5578c5c 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -16,15 +16,6 @@
.equ NR_syscalls, __NR_syscalls
- .macro arch_ret_to_user, tmp
-#ifdef CONFIG_ARCH_IOP32X
- mrc p15, 0, \tmp, c15, c1, 0
- tst \tmp, #(1 << 6)
- bicne \tmp, \tmp, #(1 << 6)
- mcrne p15, 0, \tmp, c15, c1, 0 @ Disable cp6 access
-#endif
- .endm
-
#include "entry-header.S"
saved_psr .req r8
@@ -55,10 +46,6 @@ __ret_fast_syscall:
movs r1, r1, lsl #16
bne fast_work_pending
-
- /* perform architecture specific actions before user return */
- arch_ret_to_user r1
-
restore_user_regs fast = 1, offset = S_OFF
UNWIND(.fnend )
ENDPROC(ret_fast_syscall)
@@ -129,8 +116,6 @@ ENTRY(ret_to_user_from_irq)
no_work_pending:
asm_trace_hardirqs_on save = 0
- /* perform architecture specific actions before user return */
- arch_ret_to_user r1
ct_user_enter save = 0
restore_user_regs fast = 0, offset = 0
diff --git a/arch/arm/mach-iop32x/Kconfig b/arch/arm/mach-iop32x/Kconfig
deleted file mode 100644
index 761fbb04faa1..000000000000
--- a/arch/arm/mach-iop32x/Kconfig
+++ /dev/null
@@ -1,54 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-menuconfig ARCH_IOP32X
- bool "IOP32x-based platforms"
- depends on ARCH_MULTI_V5
- depends on CPU_LITTLE_ENDIAN
- depends on ATAGS && UNUSED_BOARD_FILES
- select CPU_XSCALE
- select GPIO_IOP
- select GPIOLIB
- select FORCE_PCI
- help
- Support for Intel's 80219 and IOP32X (XScale) family of
- processors.
-
-if ARCH_IOP32X
-
-config MACH_EP80219
- bool
-
-config MACH_GLANTANK
- bool "Enable support for the IO-Data GLAN Tank"
- help
- Say Y here if you want to run your kernel on the GLAN Tank
- NAS appliance or machines from IO-Data's HDL-Gxxx, HDL-GWxxx
- and HDL-GZxxx series.
-
-config ARCH_IQ80321
- bool "Enable support for IQ80321"
- help
- Say Y here if you want to run your kernel on the Intel IQ80321
- evaluation kit for the IOP321 processor.
-
-config ARCH_IQ31244
- bool "Enable support for EP80219/IQ31244"
- select MACH_EP80219
- help
- Say Y here if you want to run your kernel on the Intel EP80219
- evaluation kit for the Intel 80219 processor (a IOP321 variant)
- or the IQ31244 evaluation kit for the IOP321 processor.
-
-config MACH_N2100
- bool "Enable support for the Thecus n2100"
- help
- Say Y here if you want to run your kernel on the Thecus n2100
- NAS appliance.
-
-config MACH_EM7210
- bool "Enable support for the Lanner EM7210"
- help
- Say Y here if you want to run your kernel on the Lanner EM7210
- board. Say also Y here if you have a SS4000e Baxter Creek NAS
- appliance."
-
-endif
diff --git a/arch/arm/mach-iop32x/Makefile b/arch/arm/mach-iop32x/Makefile
deleted file mode 100644
index c8018ef5c6a9..000000000000
--- a/arch/arm/mach-iop32x/Makefile
+++ /dev/null
@@ -1,20 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the linux kernel.
-#
-
-obj-$(CONFIG_ARCH_IOP32X) += irq.o
-obj-$(CONFIG_ARCH_IOP32X) += i2c.o
-obj-$(CONFIG_ARCH_IOP32X) += pci.o
-obj-$(CONFIG_ARCH_IOP32X) += setup.o
-obj-$(CONFIG_ARCH_IOP32X) += time.o
-obj-$(CONFIG_ARCH_IOP32X) += cp6.o
-obj-$(CONFIG_ARCH_IOP32X) += adma.o
-obj-$(CONFIG_ARCH_IOP32X) += pmu.o
-obj-$(CONFIG_ARCH_IOP32X) += restart.o
-
-obj-$(CONFIG_MACH_GLANTANK) += glantank.o
-obj-$(CONFIG_ARCH_IQ80321) += iq80321.o
-obj-$(CONFIG_ARCH_IQ31244) += iq31244.o
-obj-$(CONFIG_MACH_N2100) += n2100.o
-obj-$(CONFIG_MACH_EM7210) += em7210.o
diff --git a/arch/arm/mach-iop32x/adma.c b/arch/arm/mach-iop32x/adma.c
deleted file mode 100644
index 764bcbff98df..000000000000
--- a/arch/arm/mach-iop32x/adma.c
+++ /dev/null
@@ -1,163 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * platform device definitions for the iop3xx dma/xor engines
- * Copyright © 2006, Intel Corporation.
- */
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_data/dma-iop32x.h>
-
-#include "iop3xx.h"
-#include "irqs.h"
-
-#define IRQ_DMA0_EOT IRQ_IOP32X_DMA0_EOT
-#define IRQ_DMA0_EOC IRQ_IOP32X_DMA0_EOC
-#define IRQ_DMA0_ERR IRQ_IOP32X_DMA0_ERR
-
-#define IRQ_DMA1_EOT IRQ_IOP32X_DMA1_EOT
-#define IRQ_DMA1_EOC IRQ_IOP32X_DMA1_EOC
-#define IRQ_DMA1_ERR IRQ_IOP32X_DMA1_ERR
-
-#define IRQ_AA_EOT IRQ_IOP32X_AA_EOT
-#define IRQ_AA_EOC IRQ_IOP32X_AA_EOC
-#define IRQ_AA_ERR IRQ_IOP32X_AA_ERR
-
-/* AAU and DMA Channels */
-static struct resource iop3xx_dma_0_resources[] = {
- [0] = {
- .start = IOP3XX_DMA_PHYS_BASE(0),
- .end = IOP3XX_DMA_UPPER_PA(0),
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_DMA0_EOT,
- .end = IRQ_DMA0_EOT,
- .flags = IORESOURCE_IRQ
- },
- [2] = {
- .start = IRQ_DMA0_EOC,
- .end = IRQ_DMA0_EOC,
- .flags = IORESOURCE_IRQ
- },
- [3] = {
- .start = IRQ_DMA0_ERR,
- .end = IRQ_DMA0_ERR,
- .flags = IORESOURCE_IRQ
- }
-};
-
-static struct resource iop3xx_dma_1_resources[] = {
- [0] = {
- .start = IOP3XX_DMA_PHYS_BASE(1),
- .end = IOP3XX_DMA_UPPER_PA(1),
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_DMA1_EOT,
- .end = IRQ_DMA1_EOT,
- .flags = IORESOURCE_IRQ
- },
- [2] = {
- .start = IRQ_DMA1_EOC,
- .end = IRQ_DMA1_EOC,
- .flags = IORESOURCE_IRQ
- },
- [3] = {
- .start = IRQ_DMA1_ERR,
- .end = IRQ_DMA1_ERR,
- .flags = IORESOURCE_IRQ
- }
-};
-
-
-static struct resource iop3xx_aau_resources[] = {
- [0] = {
- .start = IOP3XX_AAU_PHYS_BASE,
- .end = IOP3XX_AAU_UPPER_PA,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_AA_EOT,
- .end = IRQ_AA_EOT,
- .flags = IORESOURCE_IRQ
- },
- [2] = {
- .start = IRQ_AA_EOC,
- .end = IRQ_AA_EOC,
- .flags = IORESOURCE_IRQ
- },
- [3] = {
- .start = IRQ_AA_ERR,
- .end = IRQ_AA_ERR,
- .flags = IORESOURCE_IRQ
- }
-};
-
-static u64 iop3xx_adma_dmamask = DMA_BIT_MASK(32);
-
-static struct iop_adma_platform_data iop3xx_dma_0_data = {
- .hw_id = DMA0_ID,
- .pool_size = PAGE_SIZE,
-};
-
-static struct iop_adma_platform_data iop3xx_dma_1_data = {
- .hw_id = DMA1_ID,
- .pool_size = PAGE_SIZE,
-};
-
-static struct iop_adma_platform_data iop3xx_aau_data = {
- .hw_id = AAU_ID,
- .pool_size = 3 * PAGE_SIZE,
-};
-
-struct platform_device iop3xx_dma_0_channel = {
- .name = "iop-adma",
- .id = 0,
- .num_resources = 4,
- .resource = iop3xx_dma_0_resources,
- .dev = {
- .dma_mask = &iop3xx_adma_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = (void *) &iop3xx_dma_0_data,
- },
-};
-
-struct platform_device iop3xx_dma_1_channel = {
- .name = "iop-adma",
- .id = 1,
- .num_resources = 4,
- .resource = iop3xx_dma_1_resources,
- .dev = {
- .dma_mask = &iop3xx_adma_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = (void *) &iop3xx_dma_1_data,
- },
-};
-
-struct platform_device iop3xx_aau_channel = {
- .name = "iop-adma",
- .id = 2,
- .num_resources = 4,
- .resource = iop3xx_aau_resources,
- .dev = {
- .dma_mask = &iop3xx_adma_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = (void *) &iop3xx_aau_data,
- },
-};
-
-static int __init iop3xx_adma_cap_init(void)
-{
- dma_cap_set(DMA_MEMCPY, iop3xx_dma_0_data.cap_mask);
- dma_cap_set(DMA_INTERRUPT, iop3xx_dma_0_data.cap_mask);
-
- dma_cap_set(DMA_MEMCPY, iop3xx_dma_1_data.cap_mask);
- dma_cap_set(DMA_INTERRUPT, iop3xx_dma_1_data.cap_mask);
-
- dma_cap_set(DMA_XOR, iop3xx_aau_data.cap_mask);
- dma_cap_set(DMA_INTERRUPT, iop3xx_aau_data.cap_mask);
-
- return 0;
-}
-
-arch_initcall(iop3xx_adma_cap_init);
diff --git a/arch/arm/mach-iop32x/cp6.c b/arch/arm/mach-iop32x/cp6.c
deleted file mode 100644
index 7135a0ac9949..000000000000
--- a/arch/arm/mach-iop32x/cp6.c
+++ /dev/null
@@ -1,48 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * IOP Coprocessor-6 access handler
- * Copyright (c) 2006, Intel Corporation.
- */
-#include <linux/init.h>
-#include <asm/traps.h>
-#include <asm/ptrace.h>
-
-#include "iop3xx.h"
-
-void iop_enable_cp6(void)
-{
- u32 temp;
-
- /* enable cp6 access */
- asm volatile (
- "mrc p15, 0, %0, c15, c1, 0\n\t"
- "orr %0, %0, #(1 << 6)\n\t"
- "mcr p15, 0, %0, c15, c1, 0\n\t"
- "mrc p15, 0, %0, c15, c1, 0\n\t"
- "mov %0, %0\n\t"
- "sub pc, pc, #4 @ cp_wait\n\t"
- : "=r"(temp));
-}
-
-static int cp6_trap(struct pt_regs *regs, unsigned int instr)
-{
- iop_enable_cp6();
-
- return 0;
-}
-
-/* permit kernel space cp6 access
- * deny user space cp6 access
- */
-static struct undef_hook cp6_hook = {
- .instr_mask = 0x0f000ff0,
- .instr_val = 0x0e000610,
- .cpsr_mask = MODE_MASK,
- .cpsr_val = SVC_MODE,
- .fn = cp6_trap,
-};
-
-void __init iop_init_cp6_handler(void)
-{
- register_undef_hook(&cp6_hook);
-}
diff --git a/arch/arm/mach-iop32x/em7210.c b/arch/arm/mach-iop32x/em7210.c
deleted file mode 100644
index ac130aba5a6e..000000000000
--- a/arch/arm/mach-iop32x/em7210.c
+++ /dev/null
@@ -1,232 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-iop32x/em7210.c
- *
- * Board support code for the Lanner EM7210 platforms.
- *
- * Based on arch/arm/mach-iop32x/iq31244.c file.
- *
- * Copyright (C) 2007 Arnaud Patard <arnaud.patard@rtp-net.org>
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/pm.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/pci.h>
-#include <asm/mach/time.h>
-#include <asm/mach-types.h>
-
-#include "hardware.h"
-#include "gpio-iop32x.h"
-#include "irqs.h"
-
-static void __init em7210_timer_init(void)
-{
- /* http://www.kwaak.net/fotos/fotos-nas/slide_24.html */
- /* 33.333 MHz crystal. */
- iop_init_time(200000000);
-}
-
-/*
- * EM7210 RTC
- */
-static struct i2c_board_info __initdata em7210_i2c_devices[] = {
- {
- I2C_BOARD_INFO("rs5c372a", 0x32),
- },
-};
-
-/*
- * EM7210 I/O
- */
-static struct map_desc em7210_io_desc[] __initdata = {
- { /* on-board devices */
- .virtual = IQ31244_UART,
- .pfn = __phys_to_pfn(IQ31244_UART),
- .length = 0x00100000,
- .type = MT_DEVICE,
- },
-};
-
-void __init em7210_map_io(void)
-{
- iop3xx_map_io();
- iotable_init(em7210_io_desc, ARRAY_SIZE(em7210_io_desc));
-}
-
-
-/*
- * EM7210 PCI
- */
-#define INTA IRQ_IOP32X_XINT0
-#define INTB IRQ_IOP32X_XINT1
-#define INTC IRQ_IOP32X_XINT2
-#define INTD IRQ_IOP32X_XINT3
-
-static int __init
-em7210_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- static int pci_irq_table[][4] = {
- /*
- * PCI IDSEL/INTPIN->INTLINE
- * A B C D
- */
- {INTB, INTB, INTB, INTB}, /* console / uart */
- {INTA, INTA, INTA, INTA}, /* 1st 82541 */
- {INTD, INTD, INTD, INTD}, /* 2nd 82541 */
- {INTC, INTC, INTC, INTC}, /* GD31244 */
- {INTD, INTA, INTA, INTA}, /* mini-PCI */
- {INTD, INTC, INTA, INTA}, /* NEC USB */
- };
-
- if (pin < 1 || pin > 4)
- return -1;
-
- return pci_irq_table[slot % 6][pin - 1];
-}
-
-static struct hw_pci em7210_pci __initdata = {
- .nr_controllers = 1,
- .ops = &iop3xx_ops,
- .setup = iop3xx_pci_setup,
- .preinit = iop3xx_pci_preinit,
- .map_irq = em7210_pci_map_irq,
-};
-
-static int __init em7210_pci_init(void)
-{
- if (machine_is_em7210())
- pci_common_init(&em7210_pci);
-
- return 0;
-}
-
-subsys_initcall(em7210_pci_init);
-
-
-/*
- * EM7210 Flash
- */
-static struct physmap_flash_data em7210_flash_data = {
- .width = 2,
-};
-
-static struct resource em7210_flash_resource = {
- .start = 0xf0000000,
- .end = 0xf1ffffff,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device em7210_flash_device = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &em7210_flash_data,
- },
- .num_resources = 1,
- .resource = &em7210_flash_resource,
-};
-
-
-/*
- * EM7210 UART
- * The physical address of the serial port is 0xfe800000,
- * so it can be used for physical and virtual address.
- */
-static struct plat_serial8250_port em7210_serial_port[] = {
- {
- .mapbase = IQ31244_UART,
- .membase = (char *)IQ31244_UART,
- .irq = IRQ_IOP32X_XINT1,
- .flags = UPF_SKIP_TEST,
- .iotype = UPIO_MEM,
- .regshift = 0,
- .uartclk = 1843200,
- },
- { },
-};
-
-static struct resource em7210_uart_resource = {
- .start = IQ31244_UART,
- .end = IQ31244_UART + 7,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device em7210_serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = em7210_serial_port,
- },
- .num_resources = 1,
- .resource = &em7210_uart_resource,
-};
-
-#define EM7210_HARDWARE_POWER 0
-
-void em7210_power_off(void)
-{
- int ret;
-
- ret = gpio_direction_output(EM7210_HARDWARE_POWER, 1);
- if (ret)
- pr_crit("could not drive power off GPIO high\n");
-}
-
-static int __init em7210_request_gpios(void)
-{
- int ret;
-
- if (!machine_is_em7210())
- return 0;
-
- ret = gpio_request(EM7210_HARDWARE_POWER, "power");
- if (ret) {
- pr_err("could not request power off GPIO\n");
- return 0;
- }
-
- pm_power_off = em7210_power_off;
-
- return 0;
-}
-device_initcall(em7210_request_gpios);
-
-static void __init em7210_init_machine(void)
-{
- register_iop32x_gpio();
- platform_device_register(&em7210_serial_device);
- gpiod_add_lookup_table(&iop3xx_i2c0_gpio_lookup);
- gpiod_add_lookup_table(&iop3xx_i2c1_gpio_lookup);
- platform_device_register(&iop3xx_i2c0_device);
- platform_device_register(&iop3xx_i2c1_device);
- platform_device_register(&em7210_flash_device);
- platform_device_register(&iop3xx_dma_0_channel);
- platform_device_register(&iop3xx_dma_1_channel);
-
- i2c_register_board_info(0, em7210_i2c_devices,
- ARRAY_SIZE(em7210_i2c_devices));
-}
-
-MACHINE_START(EM7210, "Lanner EM7210")
- .atag_offset = 0x100,
- .nr_irqs = IOP32X_NR_IRQS,
- .map_io = em7210_map_io,
- .init_irq = iop32x_init_irq,
- .init_time = em7210_timer_init,
- .init_machine = em7210_init_machine,
- .restart = iop3xx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c
deleted file mode 100644
index cd6e7da2ea10..000000000000
--- a/arch/arm/mach-iop32x/glantank.c
+++ /dev/null
@@ -1,214 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-iop32x/glantank.c
- *
- * Board support code for the GLAN Tank.
- *
- * Copyright (C) 2006, 2007 Martin Michlmayr <tbm@cyrius.com>
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/f75375s.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/pm.h>
-#include <linux/string.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/mtd/physmap.h>
-#include <linux/i2c.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/gpio/machine.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/pci.h>
-#include <asm/mach/time.h>
-#include <asm/mach-types.h>
-#include <asm/page.h>
-
-#include "hardware.h"
-#include "gpio-iop32x.h"
-#include "irqs.h"
-
-/*
- * GLAN Tank timer tick configuration.
- */
-static void __init glantank_timer_init(void)
-{
- /* 33.333 MHz crystal. */
- iop_init_time(200000000);
-}
-
-
-/*
- * GLAN Tank I/O.
- */
-static struct map_desc glantank_io_desc[] __initdata = {
- { /* on-board devices */
- .virtual = GLANTANK_UART,
- .pfn = __phys_to_pfn(GLANTANK_UART),
- .length = 0x00100000,
- .type = MT_DEVICE
- },
-};
-
-void __init glantank_map_io(void)
-{
- iop3xx_map_io();
- iotable_init(glantank_io_desc, ARRAY_SIZE(glantank_io_desc));
-}
-
-
-/*
- * GLAN Tank PCI.
- */
-#define INTA IRQ_IOP32X_XINT0
-#define INTB IRQ_IOP32X_XINT1
-#define INTC IRQ_IOP32X_XINT2
-#define INTD IRQ_IOP32X_XINT3
-
-static int __init
-glantank_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- static int pci_irq_table[][4] = {
- /*
- * PCI IDSEL/INTPIN->INTLINE
- * A B C D
- */
- {INTD, INTD, INTD, INTD}, /* UART (8250) */
- {INTA, INTA, INTA, INTA}, /* Ethernet (E1000) */
- {INTB, INTB, INTB, INTB}, /* IDE (AEC6280R) */
- {INTC, INTC, INTC, INTC}, /* USB (NEC) */
- };
-
- BUG_ON(pin < 1 || pin > 4);
-
- return pci_irq_table[slot % 4][pin - 1];
-}
-
-static struct hw_pci glantank_pci __initdata = {
- .nr_controllers = 1,
- .ops = &iop3xx_ops,
- .setup = iop3xx_pci_setup,
- .preinit = iop3xx_pci_preinit,
- .map_irq = glantank_pci_map_irq,
-};
-
-static int __init glantank_pci_init(void)
-{
- if (machine_is_glantank())
- pci_common_init(&glantank_pci);
-
- return 0;
-}
-
-subsys_initcall(glantank_pci_init);
-
-
-/*
- * GLAN Tank machine initialization.
- */
-static struct physmap_flash_data glantank_flash_data = {
- .width = 2,
-};
-
-static struct resource glantank_flash_resource = {
- .start = 0xf0000000,
- .end = 0xf007ffff,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device glantank_flash_device = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &glantank_flash_data,
- },
- .num_resources = 1,
- .resource = &glantank_flash_resource,
-};
-
-static struct plat_serial8250_port glantank_serial_port[] = {
- {
- .mapbase = GLANTANK_UART,
- .membase = (char *)GLANTANK_UART,
- .irq = IRQ_IOP32X_XINT3,
- .flags = UPF_SKIP_TEST,
- .iotype = UPIO_MEM,
- .regshift = 0,
- .uartclk = 1843200,
- },
- { },
-};
-
-static struct resource glantank_uart_resource = {
- .start = GLANTANK_UART,
- .end = GLANTANK_UART + 7,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device glantank_serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = glantank_serial_port,
- },
- .num_resources = 1,
- .resource = &glantank_uart_resource,
-};
-
-static struct f75375s_platform_data glantank_f75375s = {
- .pwm = { 255, 255 },
- .pwm_enable = { 0, 0 },
-};
-
-static struct i2c_board_info __initdata glantank_i2c_devices[] = {
- {
- I2C_BOARD_INFO("rs5c372a", 0x32),
- },
- {
- I2C_BOARD_INFO("f75375", 0x2e),
- .platform_data = &glantank_f75375s,
- },
-};
-
-static void glantank_power_off(void)
-{
- __raw_writeb(0x01, IOMEM(0xfe8d0004));
-
- while (1)
- ;
-}
-
-static void __init glantank_init_machine(void)
-{
- register_iop32x_gpio();
- gpiod_add_lookup_table(&iop3xx_i2c0_gpio_lookup);
- gpiod_add_lookup_table(&iop3xx_i2c1_gpio_lookup);
- platform_device_register(&iop3xx_i2c0_device);
- platform_device_register(&iop3xx_i2c1_device);
- platform_device_register(&glantank_flash_device);
- platform_device_register(&glantank_serial_device);
- platform_device_register(&iop3xx_dma_0_channel);
- platform_device_register(&iop3xx_dma_1_channel);
-
- i2c_register_board_info(0, glantank_i2c_devices,
- ARRAY_SIZE(glantank_i2c_devices));
-
- pm_power_off = glantank_power_off;
-}
-
-MACHINE_START(GLANTANK, "GLAN Tank")
- /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .atag_offset = 0x100,
- .nr_irqs = IOP32X_NR_IRQS,
- .map_io = glantank_map_io,
- .init_irq = iop32x_init_irq,
- .init_time = glantank_timer_init,
- .init_machine = glantank_init_machine,
- .restart = iop3xx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-iop32x/glantank.h b/arch/arm/mach-iop32x/glantank.h
deleted file mode 100644
index f38e86b82c3d..000000000000
--- a/arch/arm/mach-iop32x/glantank.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * IO-Data GLAN Tank board registers
- */
-
-#ifndef __GLANTANK_H
-#define __GLANTANK_H
-
-#define GLANTANK_UART 0xfe800000 /* UART */
-
-
-#endif
diff --git a/arch/arm/mach-iop32x/gpio-iop32x.h b/arch/arm/mach-iop32x/gpio-iop32x.h
deleted file mode 100644
index 20af87e4c5e8..000000000000
--- a/arch/arm/mach-iop32x/gpio-iop32x.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-static struct resource iop32x_gpio_res[] = {
- DEFINE_RES_MEM((IOP3XX_PERIPHERAL_PHYS_BASE + 0x07c4), 0x10),
-};
-
-static inline void register_iop32x_gpio(void)
-{
- platform_device_register_simple("gpio-iop", 0,
- iop32x_gpio_res,
- ARRAY_SIZE(iop32x_gpio_res));
-}
diff --git a/arch/arm/mach-iop32x/hardware.h b/arch/arm/mach-iop32x/hardware.h
deleted file mode 100644
index 43ab4fb8f9b0..000000000000
--- a/arch/arm/mach-iop32x/hardware.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __HARDWARE_H
-#define __HARDWARE_H
-
-#include <asm/types.h>
-
-/*
- * Note about PCI IO space mappings
- *
- * To make IO space accesses efficient, we store virtual addresses in
- * the IO resources.
- *
- * The PCI IO space is located at virtual 0xfe000000 from physical
- * 0x90000000. The PCI BARs must be programmed with physical addresses,
- * but when we read them, we convert them to virtual addresses. See
- * arch/arm/plat-iop/pci.c.
- */
-
-#ifndef __ASSEMBLY__
-void iop32x_init_irq(void);
-#endif
-
-
-/*
- * Generic chipset bits
- */
-#include "iop3xx.h"
-
-/*
- * Board specific bits
- */
-#include "glantank.h"
-#include "iq80321.h"
-#include "iq31244.h"
-#include "n2100.h"
-
-
-#endif
diff --git a/arch/arm/mach-iop32x/i2c.c b/arch/arm/mach-iop32x/i2c.c
deleted file mode 100644
index e422286af469..000000000000
--- a/arch/arm/mach-iop32x/i2c.c
+++ /dev/null
@@ -1,92 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/plat-iop/i2c.c
- *
- * Author: Nicolas Pitre <nico@cam.org>
- * Copyright (C) 2001 MontaVista Software, Inc.
- * Copyright (C) 2004 Intel Corporation.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/major.h>
-#include <linux/fs.h>
-#include <linux/platform_device.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/serial_core.h>
-#include <linux/io.h>
-#include <linux/gpio/machine.h>
-#include <asm/page.h>
-#include <asm/mach/map.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <asm/mach/arch.h>
-
-#include "hardware.h"
-#include "iop3xx.h"
-#include "irqs.h"
-
-/*
- * Each of the I2C busses have corresponding GPIO lines, and the driver
- * need to access these directly to drive the bus low at times.
- */
-
-struct gpiod_lookup_table iop3xx_i2c0_gpio_lookup = {
- .dev_id = "IOP3xx-I2C.0",
- .table = {
- GPIO_LOOKUP("gpio-iop", 7, "scl", GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP("gpio-iop", 6, "sda", GPIO_ACTIVE_HIGH),
- { }
- },
-};
-
-struct gpiod_lookup_table iop3xx_i2c1_gpio_lookup = {
- .dev_id = "IOP3xx-I2C.1",
- .table = {
- GPIO_LOOKUP("gpio-iop", 5, "scl", GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP("gpio-iop", 4, "sda", GPIO_ACTIVE_HIGH),
- { }
- },
-};
-
-static struct resource iop3xx_i2c0_resources[] = {
- [0] = {
- .start = 0xfffff680,
- .end = 0xfffff697,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_IOP32X_I2C_0,
- .end = IRQ_IOP32X_I2C_0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device iop3xx_i2c0_device = {
- .name = "IOP3xx-I2C",
- .id = 0,
- .num_resources = 2,
- .resource = iop3xx_i2c0_resources,
-};
-
-
-static struct resource iop3xx_i2c1_resources[] = {
- [0] = {
- .start = 0xfffff6a0,
- .end = 0xfffff6b7,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_IOP32X_I2C_1,
- .end = IRQ_IOP32X_I2C_1,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-struct platform_device iop3xx_i2c1_device = {
- .name = "IOP3xx-I2C",
- .id = 1,
- .num_resources = 2,
- .resource = iop3xx_i2c1_resources,
-};
diff --git a/arch/arm/mach-iop32x/iop3xx.h b/arch/arm/mach-iop32x/iop3xx.h
deleted file mode 100644
index a6ec7ebadb35..000000000000
--- a/arch/arm/mach-iop32x/iop3xx.h
+++ /dev/null
@@ -1,326 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Intel IOP32X and IOP33X register definitions
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- * Copyright (C) 2004 Intel Corp.
- */
-
-#ifndef __IOP3XX_H
-#define __IOP3XX_H
-
-/*
- * Peripherals that are shared between the iop32x and iop33x but
- * located at different addresses.
- */
-#define IOP3XX_TIMER_REG(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + 0x07e0 + (reg))
-
-#include "iop3xx.h"
-
-/* ATU Parameters
- * set up a 1:1 bus to physical ram relationship
- * w/ physical ram on top of pci in the memory map
- */
-#define IOP32X_MAX_RAM_SIZE 0x40000000UL
-#define IOP3XX_MAX_RAM_SIZE IOP32X_MAX_RAM_SIZE
-#define IOP3XX_PCI_LOWER_MEM_BA 0x80000000
-
-/*
- * IOP3XX GPIO handling
- */
-#define IOP3XX_GPIO_LINE(x) (x)
-
-#ifndef __ASSEMBLY__
-extern int init_atu;
-extern int iop3xx_get_init_atu(void);
-#endif
-
-
-/*
- * IOP3XX processor registers
- */
-#define IOP3XX_PERIPHERAL_PHYS_BASE 0xffffe000
-#define IOP3XX_PERIPHERAL_VIRT_BASE 0xfedfe000
-#define IOP3XX_PERIPHERAL_SIZE 0x00002000
-#define IOP3XX_PERIPHERAL_UPPER_PA (IOP3XX_PERIPHERAL_PHYS_BASE +\
- IOP3XX_PERIPHERAL_SIZE - 1)
-#define IOP3XX_PERIPHERAL_UPPER_VA (IOP3XX_PERIPHERAL_VIRT_BASE +\
- IOP3XX_PERIPHERAL_SIZE - 1)
-#define IOP3XX_PMMR_PHYS_TO_VIRT(addr) (u32) ((u32) (addr) -\
- (IOP3XX_PERIPHERAL_PHYS_BASE\
- - IOP3XX_PERIPHERAL_VIRT_BASE))
-#define IOP3XX_REG_ADDR(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + (reg))
-
-/* Address Translation Unit */
-#define IOP3XX_ATUVID (volatile u16 *)IOP3XX_REG_ADDR(0x0100)
-#define IOP3XX_ATUDID (volatile u16 *)IOP3XX_REG_ADDR(0x0102)
-#define IOP3XX_ATUCMD (volatile u16 *)IOP3XX_REG_ADDR(0x0104)
-#define IOP3XX_ATUSR (volatile u16 *)IOP3XX_REG_ADDR(0x0106)
-#define IOP3XX_ATURID (volatile u8 *)IOP3XX_REG_ADDR(0x0108)
-#define IOP3XX_ATUCCR (volatile u32 *)IOP3XX_REG_ADDR(0x0109)
-#define IOP3XX_ATUCLSR (volatile u8 *)IOP3XX_REG_ADDR(0x010c)
-#define IOP3XX_ATULT (volatile u8 *)IOP3XX_REG_ADDR(0x010d)
-#define IOP3XX_ATUHTR (volatile u8 *)IOP3XX_REG_ADDR(0x010e)
-#define IOP3XX_ATUBIST (volatile u8 *)IOP3XX_REG_ADDR(0x010f)
-#define IOP3XX_IABAR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0110)
-#define IOP3XX_IAUBAR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0114)
-#define IOP3XX_IABAR1 (volatile u32 *)IOP3XX_REG_ADDR(0x0118)
-#define IOP3XX_IAUBAR1 (volatile u32 *)IOP3XX_REG_ADDR(0x011c)
-#define IOP3XX_IABAR2 (volatile u32 *)IOP3XX_REG_ADDR(0x0120)
-#define IOP3XX_IAUBAR2 (volatile u32 *)IOP3XX_REG_ADDR(0x0124)
-#define IOP3XX_ASVIR (volatile u16 *)IOP3XX_REG_ADDR(0x012c)
-#define IOP3XX_ASIR (volatile u16 *)IOP3XX_REG_ADDR(0x012e)
-#define IOP3XX_ERBAR (volatile u32 *)IOP3XX_REG_ADDR(0x0130)
-#define IOP3XX_ATUILR (volatile u8 *)IOP3XX_REG_ADDR(0x013c)
-#define IOP3XX_ATUIPR (volatile u8 *)IOP3XX_REG_ADDR(0x013d)
-#define IOP3XX_ATUMGNT (volatile u8 *)IOP3XX_REG_ADDR(0x013e)
-#define IOP3XX_ATUMLAT (volatile u8 *)IOP3XX_REG_ADDR(0x013f)
-#define IOP3XX_IALR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0140)
-#define IOP3XX_IATVR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0144)
-#define IOP3XX_ERLR (volatile u32 *)IOP3XX_REG_ADDR(0x0148)
-#define IOP3XX_ERTVR (volatile u32 *)IOP3XX_REG_ADDR(0x014c)
-#define IOP3XX_IALR1 (volatile u32 *)IOP3XX_REG_ADDR(0x0150)
-#define IOP3XX_IALR2 (volatile u32 *)IOP3XX_REG_ADDR(0x0154)
-#define IOP3XX_IATVR2 (volatile u32 *)IOP3XX_REG_ADDR(0x0158)
-#define IOP3XX_OIOWTVR (volatile u32 *)IOP3XX_REG_ADDR(0x015c)
-#define IOP3XX_OMWTVR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0160)
-#define IOP3XX_OUMWTVR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0164)
-#define IOP3XX_OMWTVR1 (volatile u32 *)IOP3XX_REG_ADDR(0x0168)
-#define IOP3XX_OUMWTVR1 (volatile u32 *)IOP3XX_REG_ADDR(0x016c)
-#define IOP3XX_OUDWTVR (volatile u32 *)IOP3XX_REG_ADDR(0x0178)
-#define IOP3XX_ATUCR (volatile u32 *)IOP3XX_REG_ADDR(0x0180)
-#define IOP3XX_PCSR (volatile u32 *)IOP3XX_REG_ADDR(0x0184)
-#define IOP3XX_ATUISR (volatile u32 *)IOP3XX_REG_ADDR(0x0188)
-#define IOP3XX_ATUIMR (volatile u32 *)IOP3XX_REG_ADDR(0x018c)
-#define IOP3XX_IABAR3 (volatile u32 *)IOP3XX_REG_ADDR(0x0190)
-#define IOP3XX_IAUBAR3 (volatile u32 *)IOP3XX_REG_ADDR(0x0194)
-#define IOP3XX_IALR3 (volatile u32 *)IOP3XX_REG_ADDR(0x0198)
-#define IOP3XX_IATVR3 (volatile u32 *)IOP3XX_REG_ADDR(0x019c)
-#define IOP3XX_OCCAR (volatile u32 *)IOP3XX_REG_ADDR(0x01a4)
-#define IOP3XX_OCCDR (volatile u32 *)IOP3XX_REG_ADDR(0x01ac)
-#define IOP3XX_PDSCR (volatile u32 *)IOP3XX_REG_ADDR(0x01bc)
-#define IOP3XX_PMCAPID (volatile u8 *)IOP3XX_REG_ADDR(0x01c0)
-#define IOP3XX_PMNEXT (volatile u8 *)IOP3XX_REG_ADDR(0x01c1)
-#define IOP3XX_APMCR (volatile u16 *)IOP3XX_REG_ADDR(0x01c2)
-#define IOP3XX_APMCSR (volatile u16 *)IOP3XX_REG_ADDR(0x01c4)
-#define IOP3XX_PCIXCAPID (volatile u8 *)IOP3XX_REG_ADDR(0x01e0)
-#define IOP3XX_PCIXNEXT (volatile u8 *)IOP3XX_REG_ADDR(0x01e1)
-#define IOP3XX_PCIXCMD (volatile u16 *)IOP3XX_REG_ADDR(0x01e2)
-#define IOP3XX_PCIXSR (volatile u32 *)IOP3XX_REG_ADDR(0x01e4)
-#define IOP3XX_PCIIRSR (volatile u32 *)IOP3XX_REG_ADDR(0x01ec)
-#define IOP3XX_PCSR_OUT_Q_BUSY (1 << 15)
-#define IOP3XX_PCSR_IN_Q_BUSY (1 << 14)
-#define IOP3XX_ATUCR_OUT_EN (1 << 1)
-
-#define IOP3XX_INIT_ATU_DEFAULT 0
-#define IOP3XX_INIT_ATU_DISABLE -1
-#define IOP3XX_INIT_ATU_ENABLE 1
-
-/* Messaging Unit */
-#define IOP3XX_IMR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0310)
-#define IOP3XX_IMR1 (volatile u32 *)IOP3XX_REG_ADDR(0x0314)
-#define IOP3XX_OMR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0318)
-#define IOP3XX_OMR1 (volatile u32 *)IOP3XX_REG_ADDR(0x031c)
-#define IOP3XX_IDR (volatile u32 *)IOP3XX_REG_ADDR(0x0320)
-#define IOP3XX_IISR (volatile u32 *)IOP3XX_REG_ADDR(0x0324)
-#define IOP3XX_IIMR (volatile u32 *)IOP3XX_REG_ADDR(0x0328)
-#define IOP3XX_ODR (volatile u32 *)IOP3XX_REG_ADDR(0x032c)
-#define IOP3XX_OISR (volatile u32 *)IOP3XX_REG_ADDR(0x0330)
-#define IOP3XX_OIMR (volatile u32 *)IOP3XX_REG_ADDR(0x0334)
-#define IOP3XX_MUCR (volatile u32 *)IOP3XX_REG_ADDR(0x0350)
-#define IOP3XX_QBAR (volatile u32 *)IOP3XX_REG_ADDR(0x0354)
-#define IOP3XX_IFHPR (volatile u32 *)IOP3XX_REG_ADDR(0x0360)
-#define IOP3XX_IFTPR (volatile u32 *)IOP3XX_REG_ADDR(0x0364)
-#define IOP3XX_IPHPR (volatile u32 *)IOP3XX_REG_ADDR(0x0368)
-#define IOP3XX_IPTPR (volatile u32 *)IOP3XX_REG_ADDR(0x036c)
-#define IOP3XX_OFHPR (volatile u32 *)IOP3XX_REG_ADDR(0x0370)
-#define IOP3XX_OFTPR (volatile u32 *)IOP3XX_REG_ADDR(0x0374)
-#define IOP3XX_OPHPR (volatile u32 *)IOP3XX_REG_ADDR(0x0378)
-#define IOP3XX_OPTPR (volatile u32 *)IOP3XX_REG_ADDR(0x037c)
-#define IOP3XX_IAR (volatile u32 *)IOP3XX_REG_ADDR(0x0380)
-
-/* DMA Controller */
-#define IOP3XX_DMA_PHYS_BASE(chan) (IOP3XX_PERIPHERAL_PHYS_BASE + \
- (0x400 + (chan << 6)))
-#define IOP3XX_DMA_UPPER_PA(chan) (IOP3XX_DMA_PHYS_BASE(chan) + 0x27)
-
-/* Peripheral bus interface */
-#define IOP3XX_PBCR (volatile u32 *)IOP3XX_REG_ADDR(0x0680)
-#define IOP3XX_PBISR (volatile u32 *)IOP3XX_REG_ADDR(0x0684)
-#define IOP3XX_PBBAR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0688)
-#define IOP3XX_PBLR0 (volatile u32 *)IOP3XX_REG_ADDR(0x068c)
-#define IOP3XX_PBBAR1 (volatile u32 *)IOP3XX_REG_ADDR(0x0690)
-#define IOP3XX_PBLR1 (volatile u32 *)IOP3XX_REG_ADDR(0x0694)
-#define IOP3XX_PBBAR2 (volatile u32 *)IOP3XX_REG_ADDR(0x0698)
-#define IOP3XX_PBLR2 (volatile u32 *)IOP3XX_REG_ADDR(0x069c)
-#define IOP3XX_PBBAR3 (volatile u32 *)IOP3XX_REG_ADDR(0x06a0)
-#define IOP3XX_PBLR3 (volatile u32 *)IOP3XX_REG_ADDR(0x06a4)
-#define IOP3XX_PBBAR4 (volatile u32 *)IOP3XX_REG_ADDR(0x06a8)
-#define IOP3XX_PBLR4 (volatile u32 *)IOP3XX_REG_ADDR(0x06ac)
-#define IOP3XX_PBBAR5 (volatile u32 *)IOP3XX_REG_ADDR(0x06b0)
-#define IOP3XX_PBLR5 (volatile u32 *)IOP3XX_REG_ADDR(0x06b4)
-#define IOP3XX_PMBR0 (volatile u32 *)IOP3XX_REG_ADDR(0x06c0)
-#define IOP3XX_PMBR1 (volatile u32 *)IOP3XX_REG_ADDR(0x06e0)
-#define IOP3XX_PMBR2 (volatile u32 *)IOP3XX_REG_ADDR(0x06e4)
-
-/* Peripheral performance monitoring unit */
-#define IOP3XX_GTMR (volatile u32 *)IOP3XX_REG_ADDR(0x0700)
-#define IOP3XX_ESR (volatile u32 *)IOP3XX_REG_ADDR(0x0704)
-#define IOP3XX_EMISR (volatile u32 *)IOP3XX_REG_ADDR(0x0708)
-#define IOP3XX_GTSR (volatile u32 *)IOP3XX_REG_ADDR(0x0710)
-/* PERCR0 DOESN'T EXIST - index from 1! */
-#define IOP3XX_PERCR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0710)
-
-/* Timers */
-#define IOP3XX_TU_TMR0 (volatile u32 *)IOP3XX_TIMER_REG(0x0000)
-#define IOP3XX_TU_TMR1 (volatile u32 *)IOP3XX_TIMER_REG(0x0004)
-#define IOP3XX_TU_TCR0 (volatile u32 *)IOP3XX_TIMER_REG(0x0008)
-#define IOP3XX_TU_TCR1 (volatile u32 *)IOP3XX_TIMER_REG(0x000c)
-#define IOP3XX_TU_TRR0 (volatile u32 *)IOP3XX_TIMER_REG(0x0010)
-#define IOP3XX_TU_TRR1 (volatile u32 *)IOP3XX_TIMER_REG(0x0014)
-#define IOP3XX_TU_TISR (volatile u32 *)IOP3XX_TIMER_REG(0x0018)
-#define IOP3XX_TU_WDTCR (volatile u32 *)IOP3XX_TIMER_REG(0x001c)
-#define IOP_TMR_EN 0x02
-#define IOP_TMR_RELOAD 0x04
-#define IOP_TMR_PRIVILEGED 0x08
-#define IOP_TMR_RATIO_1_1 0x00
-
-/* Watchdog timer definitions */
-#define IOP_WDTCR_EN_ARM 0x1e1e1e1e
-#define IOP_WDTCR_EN 0xe1e1e1e1
-/* iop3xx does not support stopping the watchdog, so we just re-arm */
-#define IOP_WDTCR_DIS_ARM (IOP_WDTCR_EN_ARM)
-#define IOP_WDTCR_DIS (IOP_WDTCR_EN)
-
-/* Application accelerator unit */
-#define IOP3XX_AAU_PHYS_BASE (IOP3XX_PERIPHERAL_PHYS_BASE + 0x800)
-#define IOP3XX_AAU_UPPER_PA (IOP3XX_AAU_PHYS_BASE + 0xa7)
-
-/* I2C bus interface unit */
-#define IOP3XX_ICR0 (volatile u32 *)IOP3XX_REG_ADDR(0x1680)
-#define IOP3XX_ISR0 (volatile u32 *)IOP3XX_REG_ADDR(0x1684)
-#define IOP3XX_ISAR0 (volatile u32 *)IOP3XX_REG_ADDR(0x1688)
-#define IOP3XX_IDBR0 (volatile u32 *)IOP3XX_REG_ADDR(0x168c)
-#define IOP3XX_IBMR0 (volatile u32 *)IOP3XX_REG_ADDR(0x1694)
-#define IOP3XX_ICR1 (volatile u32 *)IOP3XX_REG_ADDR(0x16a0)
-#define IOP3XX_ISR1 (volatile u32 *)IOP3XX_REG_ADDR(0x16a4)
-#define IOP3XX_ISAR1 (volatile u32 *)IOP3XX_REG_ADDR(0x16a8)
-#define IOP3XX_IDBR1 (volatile u32 *)IOP3XX_REG_ADDR(0x16ac)
-#define IOP3XX_IBMR1 (volatile u32 *)IOP3XX_REG_ADDR(0x16b4)
-
-
-/*
- * IOP3XX I/O and Mem space regions for PCI autoconfiguration
- */
-#define IOP3XX_PCI_LOWER_MEM_PA 0x80000000
-#define IOP3XX_PCI_MEM_WINDOW_SIZE 0x08000000
-
-#define IOP3XX_PCI_LOWER_IO_PA 0x90000000
-#define IOP3XX_PCI_LOWER_IO_BA 0x00000000
-
-#ifndef __ASSEMBLY__
-
-#include <linux/types.h>
-#include <linux/reboot.h>
-
-void iop3xx_map_io(void);
-void iop_enable_cp6(void);
-void iop_init_cp6_handler(void);
-void iop_init_time(unsigned long tickrate);
-void iop3xx_restart(enum reboot_mode, const char *);
-
-static inline u32 read_tmr0(void)
-{
- u32 val;
- asm volatile("mrc p6, 0, %0, c0, c1, 0" : "=r" (val));
- return val;
-}
-
-static inline void write_tmr0(u32 val)
-{
- asm volatile("mcr p6, 0, %0, c0, c1, 0" : : "r" (val));
-}
-
-static inline void write_tmr1(u32 val)
-{
- asm volatile("mcr p6, 0, %0, c1, c1, 0" : : "r" (val));
-}
-
-static inline u32 read_tcr0(void)
-{
- u32 val;
- asm volatile("mrc p6, 0, %0, c2, c1, 0" : "=r" (val));
- return val;
-}
-
-static inline void write_tcr0(u32 val)
-{
- asm volatile("mcr p6, 0, %0, c2, c1, 0" : : "r" (val));
-}
-
-static inline u32 read_tcr1(void)
-{
- u32 val;
- asm volatile("mrc p6, 0, %0, c3, c1, 0" : "=r" (val));
- return val;
-}
-
-static inline void write_tcr1(u32 val)
-{
- asm volatile("mcr p6, 0, %0, c3, c1, 0" : : "r" (val));
-}
-
-static inline void write_trr0(u32 val)
-{
- asm volatile("mcr p6, 0, %0, c4, c1, 0" : : "r" (val));
-}
-
-static inline void write_trr1(u32 val)
-{
- asm volatile("mcr p6, 0, %0, c5, c1, 0" : : "r" (val));
-}
-
-static inline void write_tisr(u32 val)
-{
- asm volatile("mcr p6, 0, %0, c6, c1, 0" : : "r" (val));
-}
-
-static inline u32 read_wdtcr(void)
-{
- u32 val;
- asm volatile("mrc p6, 0, %0, c7, c1, 0":"=r" (val));
- return val;
-}
-static inline void write_wdtcr(u32 val)
-{
- asm volatile("mcr p6, 0, %0, c7, c1, 0"::"r" (val));
-}
-
-extern unsigned long get_iop_tick_rate(void);
-
-/* only iop13xx has these registers, we define these to present a
- * common register interface for the iop_wdt driver.
- */
-#define IOP_RCSR_WDT (0)
-static inline u32 read_rcsr(void)
-{
- return 0;
-}
-static inline void write_wdtsr(u32 val)
-{
- do { } while (0);
-}
-
-extern struct platform_device iop3xx_dma_0_channel;
-extern struct platform_device iop3xx_dma_1_channel;
-extern struct platform_device iop3xx_aau_channel;
-extern struct platform_device iop3xx_i2c0_device;
-extern struct platform_device iop3xx_i2c1_device;
-extern struct gpiod_lookup_table iop3xx_i2c0_gpio_lookup;
-extern struct gpiod_lookup_table iop3xx_i2c1_gpio_lookup;
-
-#endif
-
-
-#endif
diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c
deleted file mode 100644
index 8b4c29d17265..000000000000
--- a/arch/arm/mach-iop32x/iq31244.c
+++ /dev/null
@@ -1,333 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-iop32x/iq31244.c
- *
- * Board support code for the Intel EP80219 and IQ31244 platforms.
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- * Copyright 2003 (c) MontaVista, Software, Inc.
- * Copyright (C) 2004 Intel Corp.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/pm.h>
-#include <linux/string.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/gpio/machine.h>
-#include <asm/cputype.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/pci.h>
-#include <asm/mach/time.h>
-#include <asm/mach-types.h>
-#include <asm/page.h>
-
-#include "hardware.h"
-#include "irqs.h"
-#include "gpio-iop32x.h"
-
-/*
- * Until March of 2007 iq31244 platforms and ep80219 platforms shared the
- * same machine id, and the processor type was used to select board type.
- * However this assumption breaks for an iq80219 board which is an iop219
- * processor on an iq31244 board. The force_ep80219 flag has been added
- * for old boot loaders using the iq31244 machine id for an ep80219 platform.
- */
-static int force_ep80219;
-
-static int is_80219(void)
-{
- return !!((read_cpuid_id() & 0xffffffe0) == 0x69052e20);
-}
-
-static int is_ep80219(void)
-{
- if (machine_is_ep80219() || force_ep80219)
- return 1;
- else
- return 0;
-}
-
-
-/*
- * EP80219/IQ31244 timer tick configuration.
- */
-static void __init iq31244_timer_init(void)
-{
- if (is_ep80219()) {
- /* 33.333 MHz crystal. */
- iop_init_time(200000000);
- } else {
- /* 33.000 MHz crystal. */
- iop_init_time(198000000);
- }
-}
-
-
-/*
- * IQ31244 I/O.
- */
-static struct map_desc iq31244_io_desc[] __initdata = {
- { /* on-board devices */
- .virtual = IQ31244_UART,
- .pfn = __phys_to_pfn(IQ31244_UART),
- .length = 0x00100000,
- .type = MT_DEVICE,
- },
-};
-
-void __init iq31244_map_io(void)
-{
- iop3xx_map_io();
- iotable_init(iq31244_io_desc, ARRAY_SIZE(iq31244_io_desc));
-}
-
-
-/*
- * EP80219/IQ31244 PCI.
- */
-static int __init
-ep80219_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- int irq;
-
- if (slot == 0) {
- /* CFlash */
- irq = IRQ_IOP32X_XINT1;
- } else if (slot == 1) {
- /* 82551 Pro 100 */
- irq = IRQ_IOP32X_XINT0;
- } else if (slot == 2) {
- /* PCI-X Slot */
- irq = IRQ_IOP32X_XINT3;
- } else if (slot == 3) {
- /* SATA */
- irq = IRQ_IOP32X_XINT2;
- } else {
- printk(KERN_ERR "ep80219_pci_map_irq() called for unknown "
- "device PCI:%d:%d:%d\n", dev->bus->number,
- PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
- irq = -1;
- }
-
- return irq;
-}
-
-static struct hw_pci ep80219_pci __initdata = {
- .nr_controllers = 1,
- .ops = &iop3xx_ops,
- .setup = iop3xx_pci_setup,
- .preinit = iop3xx_pci_preinit,
- .map_irq = ep80219_pci_map_irq,
-};
-
-static int __init
-iq31244_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- int irq;
-
- if (slot == 0) {
- /* CFlash */
- irq = IRQ_IOP32X_XINT1;
- } else if (slot == 1) {
- /* SATA */
- irq = IRQ_IOP32X_XINT2;
- } else if (slot == 2) {
- /* PCI-X Slot */
- irq = IRQ_IOP32X_XINT3;
- } else if (slot == 3) {
- /* 82546 GigE */
- irq = IRQ_IOP32X_XINT0;
- } else {
- printk(KERN_ERR "iq31244_pci_map_irq called for unknown "
- "device PCI:%d:%d:%d\n", dev->bus->number,
- PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
- irq = -1;
- }
-
- return irq;
-}
-
-static struct hw_pci iq31244_pci __initdata = {
- .nr_controllers = 1,
- .ops = &iop3xx_ops,
- .setup = iop3xx_pci_setup,
- .preinit = iop3xx_pci_preinit,
- .map_irq = iq31244_pci_map_irq,
-};
-
-static int __init iq31244_pci_init(void)
-{
- if (is_ep80219())
- pci_common_init(&ep80219_pci);
- else if (machine_is_iq31244()) {
- if (is_80219()) {
- printk("note: iq31244 board type has been selected\n");
- printk("note: to select ep80219 operation:\n");
- printk("\t1/ specify \"force_ep80219\" on the kernel"
- " command line\n");
- printk("\t2/ update boot loader to pass"
- " the ep80219 id: %d\n", MACH_TYPE_EP80219);
- }
- pci_common_init(&iq31244_pci);
- }
-
- return 0;
-}
-
-subsys_initcall(iq31244_pci_init);
-
-
-/*
- * IQ31244 machine initialisation.
- */
-static struct physmap_flash_data iq31244_flash_data = {
- .width = 2,
-};
-
-static struct resource iq31244_flash_resource = {
- .start = 0xf0000000,
- .end = 0xf07fffff,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device iq31244_flash_device = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &iq31244_flash_data,
- },
- .num_resources = 1,
- .resource = &iq31244_flash_resource,
-};
-
-static struct plat_serial8250_port iq31244_serial_port[] = {
- {
- .mapbase = IQ31244_UART,
- .membase = (char *)IQ31244_UART,
- .irq = IRQ_IOP32X_XINT1,
- .flags = UPF_SKIP_TEST,
- .iotype = UPIO_MEM,
- .regshift = 0,
- .uartclk = 1843200,
- },
- { },
-};
-
-static struct resource iq31244_uart_resource = {
- .start = IQ31244_UART,
- .end = IQ31244_UART + 7,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device iq31244_serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = iq31244_serial_port,
- },
- .num_resources = 1,
- .resource = &iq31244_uart_resource,
-};
-
-/*
- * This function will send a SHUTDOWN_COMPLETE message to the PIC
- * controller over I2C. We are not using the i2c subsystem since
- * we are going to power off and it may be removed
- */
-void ep80219_power_off(void)
-{
- /*
- * Send the Address byte w/ the start condition
- */
- *IOP3XX_IDBR1 = 0x60;
- *IOP3XX_ICR1 = 0xE9;
- mdelay(1);
-
- /*
- * Send the START_MSG byte w/ no start or stop condition
- */
- *IOP3XX_IDBR1 = 0x0F;
- *IOP3XX_ICR1 = 0xE8;
- mdelay(1);
-
- /*
- * Send the SHUTDOWN_COMPLETE Message ID byte w/ no start or
- * stop condition
- */
- *IOP3XX_IDBR1 = 0x03;
- *IOP3XX_ICR1 = 0xE8;
- mdelay(1);
-
- /*
- * Send an ignored byte w/ stop condition
- */
- *IOP3XX_IDBR1 = 0x00;
- *IOP3XX_ICR1 = 0xEA;
-
- while (1)
- ;
-}
-
-static void __init iq31244_init_machine(void)
-{
- register_iop32x_gpio();
- gpiod_add_lookup_table(&iop3xx_i2c0_gpio_lookup);
- gpiod_add_lookup_table(&iop3xx_i2c1_gpio_lookup);
- platform_device_register(&iop3xx_i2c0_device);
- platform_device_register(&iop3xx_i2c1_device);
- platform_device_register(&iq31244_flash_device);
- platform_device_register(&iq31244_serial_device);
- platform_device_register(&iop3xx_dma_0_channel);
- platform_device_register(&iop3xx_dma_1_channel);
-
- if (is_ep80219())
- pm_power_off = ep80219_power_off;
-
- if (!is_80219())
- platform_device_register(&iop3xx_aau_channel);
-}
-
-static int __init force_ep80219_setup(char *str)
-{
- force_ep80219 = 1;
- return 1;
-}
-
-__setup("force_ep80219", force_ep80219_setup);
-
-MACHINE_START(IQ31244, "Intel IQ31244")
- /* Maintainer: Intel Corp. */
- .atag_offset = 0x100,
- .map_io = iq31244_map_io,
- .init_irq = iop32x_init_irq,
- .init_time = iq31244_timer_init,
- .init_machine = iq31244_init_machine,
- .restart = iop3xx_restart,
-MACHINE_END
-
-/* There should have been an ep80219 machine identifier from the beginning.
- * Boot roms older than March 2007 do not know the ep80219 machine id. Pass
- * "force_ep80219" on the kernel command line, otherwise iq31244 operation
- * will be selected.
- */
-MACHINE_START(EP80219, "Intel EP80219")
- /* Maintainer: Intel Corp. */
- .atag_offset = 0x100,
- .nr_irqs = IOP32X_NR_IRQS,
- .map_io = iq31244_map_io,
- .init_irq = iop32x_init_irq,
- .init_time = iq31244_timer_init,
- .init_machine = iq31244_init_machine,
- .restart = iop3xx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-iop32x/iq31244.h b/arch/arm/mach-iop32x/iq31244.h
deleted file mode 100644
index a7ac691e48d3..000000000000
--- a/arch/arm/mach-iop32x/iq31244.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Intel IQ31244 evaluation board registers
- */
-
-#ifndef __IQ31244_H
-#define __IQ31244_H
-
-#define IQ31244_UART 0xfe800000 /* UART #1 */
-#define IQ31244_7SEG_1 0xfe840000 /* 7-Segment MSB */
-#define IQ31244_7SEG_0 0xfe850000 /* 7-Segment LSB (WO) */
-#define IQ31244_ROTARY_SW 0xfe8d0000 /* Rotary Switch */
-#define IQ31244_BATT_STAT 0xfe8f0000 /* Battery Status */
-
-
-#endif
diff --git a/arch/arm/mach-iop32x/iq80321.c b/arch/arm/mach-iop32x/iq80321.c
deleted file mode 100644
index d9780c4660cb..000000000000
--- a/arch/arm/mach-iop32x/iq80321.c
+++ /dev/null
@@ -1,192 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-iop32x/iq80321.c
- *
- * Board support code for the Intel IQ80321 platform.
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- * Copyright (C) 2004 Intel Corp.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/string.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/gpio/machine.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/pci.h>
-#include <asm/mach/time.h>
-#include <asm/mach-types.h>
-#include <asm/page.h>
-
-#include "hardware.h"
-#include "irqs.h"
-#include "gpio-iop32x.h"
-
-/*
- * IQ80321 timer tick configuration.
- */
-static void __init iq80321_timer_init(void)
-{
- /* 33.333 MHz crystal. */
- iop_init_time(200000000);
-}
-
-
-/*
- * IQ80321 I/O.
- */
-static struct map_desc iq80321_io_desc[] __initdata = {
- { /* on-board devices */
- .virtual = IQ80321_UART,
- .pfn = __phys_to_pfn(IQ80321_UART),
- .length = 0x00100000,
- .type = MT_DEVICE,
- },
-};
-
-void __init iq80321_map_io(void)
-{
- iop3xx_map_io();
- iotable_init(iq80321_io_desc, ARRAY_SIZE(iq80321_io_desc));
-}
-
-
-/*
- * IQ80321 PCI.
- */
-static int __init
-iq80321_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- int irq;
-
- if ((slot == 2 || slot == 6) && pin == 1) {
- /* PCI-X Slot INTA */
- irq = IRQ_IOP32X_XINT2;
- } else if ((slot == 2 || slot == 6) && pin == 2) {
- /* PCI-X Slot INTA */
- irq = IRQ_IOP32X_XINT3;
- } else if ((slot == 2 || slot == 6) && pin == 3) {
- /* PCI-X Slot INTA */
- irq = IRQ_IOP32X_XINT0;
- } else if ((slot == 2 || slot == 6) && pin == 4) {
- /* PCI-X Slot INTA */
- irq = IRQ_IOP32X_XINT1;
- } else if (slot == 4 || slot == 8) {
- /* Gig-E */
- irq = IRQ_IOP32X_XINT0;
- } else {
- printk(KERN_ERR "iq80321_pci_map_irq() called for unknown "
- "device PCI:%d:%d:%d\n", dev->bus->number,
- PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
- irq = -1;
- }
-
- return irq;
-}
-
-static struct hw_pci iq80321_pci __initdata = {
- .nr_controllers = 1,
- .ops = &iop3xx_ops,
- .setup = iop3xx_pci_setup,
- .preinit = iop3xx_pci_preinit_cond,
- .map_irq = iq80321_pci_map_irq,
-};
-
-static int __init iq80321_pci_init(void)
-{
- if ((iop3xx_get_init_atu() == IOP3XX_INIT_ATU_ENABLE) &&
- machine_is_iq80321())
- pci_common_init(&iq80321_pci);
-
- return 0;
-}
-
-subsys_initcall(iq80321_pci_init);
-
-
-/*
- * IQ80321 machine initialisation.
- */
-static struct physmap_flash_data iq80321_flash_data = {
- .width = 1,
-};
-
-static struct resource iq80321_flash_resource = {
- .start = 0xf0000000,
- .end = 0xf07fffff,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device iq80321_flash_device = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &iq80321_flash_data,
- },
- .num_resources = 1,
- .resource = &iq80321_flash_resource,
-};
-
-static struct plat_serial8250_port iq80321_serial_port[] = {
- {
- .mapbase = IQ80321_UART,
- .membase = (char *)IQ80321_UART,
- .irq = IRQ_IOP32X_XINT1,
- .flags = UPF_SKIP_TEST,
- .iotype = UPIO_MEM,
- .regshift = 0,
- .uartclk = 1843200,
- },
- { },
-};
-
-static struct resource iq80321_uart_resource = {
- .start = IQ80321_UART,
- .end = IQ80321_UART + 7,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device iq80321_serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = iq80321_serial_port,
- },
- .num_resources = 1,
- .resource = &iq80321_uart_resource,
-};
-
-static void __init iq80321_init_machine(void)
-{
- register_iop32x_gpio();
- gpiod_add_lookup_table(&iop3xx_i2c0_gpio_lookup);
- gpiod_add_lookup_table(&iop3xx_i2c1_gpio_lookup);
- platform_device_register(&iop3xx_i2c0_device);
- platform_device_register(&iop3xx_i2c1_device);
- platform_device_register(&iq80321_flash_device);
- platform_device_register(&iq80321_serial_device);
- platform_device_register(&iop3xx_dma_0_channel);
- platform_device_register(&iop3xx_dma_1_channel);
- platform_device_register(&iop3xx_aau_channel);
-}
-
-MACHINE_START(IQ80321, "Intel IQ80321")
- /* Maintainer: Intel Corp. */
- .atag_offset = 0x100,
- .nr_irqs = IOP32X_NR_IRQS,
- .map_io = iq80321_map_io,
- .init_irq = iop32x_init_irq,
- .init_time = iq80321_timer_init,
- .init_machine = iq80321_init_machine,
- .restart = iop3xx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-iop32x/iq80321.h b/arch/arm/mach-iop32x/iq80321.h
deleted file mode 100644
index 3a5d10626ea6..000000000000
--- a/arch/arm/mach-iop32x/iq80321.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Intel IQ80321 evaluation board registers
- */
-
-#ifndef __IQ80321_H
-#define __IQ80321_H
-
-#define IQ80321_UART 0xfe800000 /* UART #1 */
-#define IQ80321_7SEG_1 0xfe840000 /* 7-Segment MSB */
-#define IQ80321_7SEG_0 0xfe850000 /* 7-Segment LSB (WO) */
-#define IQ80321_ROTARY_SW 0xfe8d0000 /* Rotary Switch */
-#define IQ80321_BATT_STAT 0xfe8f0000 /* Battery Status */
-
-
-#endif
diff --git a/arch/arm/mach-iop32x/irq.c b/arch/arm/mach-iop32x/irq.c
deleted file mode 100644
index 6dca7e97d81f..000000000000
--- a/arch/arm/mach-iop32x/irq.c
+++ /dev/null
@@ -1,95 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-iop32x/irq.c
- *
- * Generic IOP32X IRQ handling functionality
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <asm/mach/irq.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include "hardware.h"
-
-static u32 iop32x_mask;
-
-static void intctl_write(u32 val)
-{
- asm volatile("mcr p6, 0, %0, c0, c0, 0" : : "r" (val));
-}
-
-static void intstr_write(u32 val)
-{
- asm volatile("mcr p6, 0, %0, c4, c0, 0" : : "r" (val));
-}
-
-static u32 iintsrc_read(void)
-{
- int irq;
-
- asm volatile("mrc p6, 0, %0, c8, c0, 0" : "=r" (irq));
-
- return irq;
-}
-
-static void
-iop32x_irq_mask(struct irq_data *d)
-{
- iop32x_mask &= ~(1 << (d->irq - 1));
- intctl_write(iop32x_mask);
-}
-
-static void
-iop32x_irq_unmask(struct irq_data *d)
-{
- iop32x_mask |= 1 << (d->irq - 1);
- intctl_write(iop32x_mask);
-}
-
-struct irq_chip ext_chip = {
- .name = "IOP32x",
- .irq_ack = iop32x_irq_mask,
- .irq_mask = iop32x_irq_mask,
- .irq_unmask = iop32x_irq_unmask,
-};
-
-static void iop_handle_irq(struct pt_regs *regs)
-{
- u32 mask;
-
- iop_enable_cp6();
-
- do {
- mask = iintsrc_read();
- if (mask)
- generic_handle_irq(fls(mask));
- } while (mask);
-}
-
-void __init iop32x_init_irq(void)
-{
- int i;
-
- iop_init_cp6_handler();
- set_handle_irq(iop_handle_irq);
-
- intctl_write(0);
- intstr_write(0);
- if (machine_is_glantank() ||
- machine_is_iq80321() ||
- machine_is_iq31244() ||
- machine_is_n2100() ||
- machine_is_em7210())
- *IOP3XX_PCIIRSR = 0x0f;
-
- for (i = 1; i < NR_IRQS; i++) {
- irq_set_chip_and_handler(i, &ext_chip, handle_level_irq);
- irq_clear_status_flags(i, IRQ_NOREQUEST | IRQ_NOPROBE);
- }
-}
diff --git a/arch/arm/mach-iop32x/irqs.h b/arch/arm/mach-iop32x/irqs.h
deleted file mode 100644
index e9fc88e09189..000000000000
--- a/arch/arm/mach-iop32x/irqs.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright: (C) 2002 Rory Bolt
- */
-
-#ifndef __IOP32X_IRQS_H
-#define __IOP32X_IRQS_H
-
-/* Interrupts in Linux start at 1, hardware starts at 0 */
-
-#define IOP_IRQ(x) ((x) + 1)
-
-/*
- * IOP80321 chipset interrupts
- */
-#define IRQ_IOP32X_DMA0_EOT IOP_IRQ(0)
-#define IRQ_IOP32X_DMA0_EOC IOP_IRQ(1)
-#define IRQ_IOP32X_DMA1_EOT IOP_IRQ(2)
-#define IRQ_IOP32X_DMA1_EOC IOP_IRQ(3)
-#define IRQ_IOP32X_AA_EOT IOP_IRQ(6)
-#define IRQ_IOP32X_AA_EOC IOP_IRQ(7)
-#define IRQ_IOP32X_CORE_PMON IOP_IRQ(8)
-#define IRQ_IOP32X_TIMER0 IOP_IRQ(9)
-#define IRQ_IOP32X_TIMER1 IOP_IRQ(10)
-#define IRQ_IOP32X_I2C_0 IOP_IRQ(11)
-#define IRQ_IOP32X_I2C_1 IOP_IRQ(12)
-#define IRQ_IOP32X_MESSAGING IOP_IRQ(13)
-#define IRQ_IOP32X_ATU_BIST IOP_IRQ(14)
-#define IRQ_IOP32X_PERFMON IOP_IRQ(15)
-#define IRQ_IOP32X_CORE_PMU IOP_IRQ(16)
-#define IRQ_IOP32X_BIU_ERR IOP_IRQ(17)
-#define IRQ_IOP32X_ATU_ERR IOP_IRQ(18)
-#define IRQ_IOP32X_MCU_ERR IOP_IRQ(19)
-#define IRQ_IOP32X_DMA0_ERR IOP_IRQ(20)
-#define IRQ_IOP32X_DMA1_ERR IOP_IRQ(21)
-#define IRQ_IOP32X_AA_ERR IOP_IRQ(23)
-#define IRQ_IOP32X_MSG_ERR IOP_IRQ(24)
-#define IRQ_IOP32X_SSP IOP_IRQ(25)
-#define IRQ_IOP32X_XINT0 IOP_IRQ(27)
-#define IRQ_IOP32X_XINT1 IOP_IRQ(28)
-#define IRQ_IOP32X_XINT2 IOP_IRQ(29)
-#define IRQ_IOP32X_XINT3 IOP_IRQ(30)
-#define IRQ_IOP32X_HPI IOP_IRQ(31)
-
-#define IOP32X_NR_IRQS (IRQ_IOP32X_HPI + 1)
-
-#endif
diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c
deleted file mode 100644
index bb1e2e11bf35..000000000000
--- a/arch/arm/mach-iop32x/n2100.c
+++ /dev/null
@@ -1,367 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-iop32x/n2100.c
- *
- * Board support code for the Thecus N2100 platform.
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- * Copyright 2003 (c) MontaVista, Software, Inc.
- * Copyright (C) 2004 Intel Corp.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/f75375s.h>
-#include <linux/leds-pca9532.h>
-#include <linux/delay.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/pm.h>
-#include <linux/string.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/mtd/physmap.h>
-#include <linux/i2c.h>
-#include <linux/platform_device.h>
-#include <linux/reboot.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/pci.h>
-#include <asm/mach/time.h>
-#include <asm/mach-types.h>
-#include <asm/page.h>
-
-#include "hardware.h"
-#include "irqs.h"
-#include "gpio-iop32x.h"
-
-/*
- * N2100 timer tick configuration.
- */
-static void __init n2100_timer_init(void)
-{
- /* 33.000 MHz crystal. */
- iop_init_time(198000000);
-}
-
-
-/*
- * N2100 I/O.
- */
-static struct map_desc n2100_io_desc[] __initdata = {
- { /* on-board devices */
- .virtual = N2100_UART,
- .pfn = __phys_to_pfn(N2100_UART),
- .length = 0x00100000,
- .type = MT_DEVICE
- },
-};
-
-void __init n2100_map_io(void)
-{
- iop3xx_map_io();
- iotable_init(n2100_io_desc, ARRAY_SIZE(n2100_io_desc));
-}
-
-
-/*
- * N2100 PCI.
- */
-static int n2100_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- int irq;
-
- if (PCI_SLOT(dev->devfn) == 1) {
- /* RTL8110SB #1 */
- irq = IRQ_IOP32X_XINT0;
- } else if (PCI_SLOT(dev->devfn) == 2) {
- /* RTL8110SB #2 */
- irq = IRQ_IOP32X_XINT3;
- } else if (PCI_SLOT(dev->devfn) == 3) {
- /* Sil3512 */
- irq = IRQ_IOP32X_XINT2;
- } else if (PCI_SLOT(dev->devfn) == 4 && pin == 1) {
- /* VT6212 INTA */
- irq = IRQ_IOP32X_XINT1;
- } else if (PCI_SLOT(dev->devfn) == 4 && pin == 2) {
- /* VT6212 INTB */
- irq = IRQ_IOP32X_XINT0;
- } else if (PCI_SLOT(dev->devfn) == 4 && pin == 3) {
- /* VT6212 INTC */
- irq = IRQ_IOP32X_XINT2;
- } else if (PCI_SLOT(dev->devfn) == 5) {
- /* Mini-PCI slot */
- irq = IRQ_IOP32X_XINT3;
- } else {
- printk(KERN_ERR "n2100_pci_map_irq() called for unknown "
- "device PCI:%d:%d:%d\n", dev->bus->number,
- PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
- irq = -1;
- }
-
- return irq;
-}
-
-static struct hw_pci n2100_pci __initdata = {
- .nr_controllers = 1,
- .ops = &iop3xx_ops,
- .setup = iop3xx_pci_setup,
- .preinit = iop3xx_pci_preinit,
- .map_irq = n2100_pci_map_irq,
-};
-
-/*
- * Both r8169 chips on the n2100 exhibit PCI parity problems. Turn
- * off parity reporting for both ports so we don't get error interrupts
- * for them.
- */
-static void n2100_fixup_r8169(struct pci_dev *dev)
-{
- if (dev->bus->number == 0 &&
- (dev->devfn == PCI_DEVFN(1, 0) ||
- dev->devfn == PCI_DEVFN(2, 0)))
- pci_disable_parity(dev);
-}
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_REALTEK, PCI_ANY_ID, n2100_fixup_r8169);
-
-static int __init n2100_pci_init(void)
-{
- if (machine_is_n2100())
- pci_common_init(&n2100_pci);
-
- return 0;
-}
-
-subsys_initcall(n2100_pci_init);
-
-
-/*
- * N2100 machine initialisation.
- */
-static struct physmap_flash_data n2100_flash_data = {
- .width = 2,
-};
-
-static struct resource n2100_flash_resource = {
- .start = 0xf0000000,
- .end = 0xf0ffffff,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device n2100_flash_device = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &n2100_flash_data,
- },
- .num_resources = 1,
- .resource = &n2100_flash_resource,
-};
-
-
-static struct plat_serial8250_port n2100_serial_port[] = {
- {
- .mapbase = N2100_UART,
- .membase = (char *)N2100_UART,
- .irq = 0,
- .flags = UPF_SKIP_TEST | UPF_AUTO_IRQ | UPF_SHARE_IRQ,
- .iotype = UPIO_MEM,
- .regshift = 0,
- .uartclk = 1843200,
- },
- { },
-};
-
-static struct resource n2100_uart_resource = {
- .start = N2100_UART,
- .end = N2100_UART + 7,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device n2100_serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = n2100_serial_port,
- },
- .num_resources = 1,
- .resource = &n2100_uart_resource,
-};
-
-static struct f75375s_platform_data n2100_f75375s = {
- .pwm = { 255, 255 },
- .pwm_enable = { 0, 0 },
-};
-
-static struct pca9532_platform_data n2100_leds = {
- .leds = {
- { .name = "n2100:red:satafail0",
- .state = PCA9532_OFF,
- .type = PCA9532_TYPE_LED,
- },
- { .name = "n2100:red:satafail1",
- .state = PCA9532_OFF,
- .type = PCA9532_TYPE_LED,
- },
- { .name = "n2100:blue:usb",
- .state = PCA9532_OFF,
- .type = PCA9532_TYPE_LED,
- },
- { .type = PCA9532_TYPE_NONE },
-
- { .type = PCA9532_TYPE_NONE },
- { .type = PCA9532_TYPE_NONE },
- { .type = PCA9532_TYPE_NONE },
- { .name = "n2100:red:usb",
- .state = PCA9532_OFF,
- .type = PCA9532_TYPE_LED,
- },
-
- { .type = PCA9532_TYPE_NONE }, /* power OFF gpio */
- { .type = PCA9532_TYPE_NONE }, /* reset gpio */
- { .type = PCA9532_TYPE_NONE },
- { .type = PCA9532_TYPE_NONE },
-
- { .type = PCA9532_TYPE_NONE },
- { .name = "n2100:orange:system",
- .state = PCA9532_OFF,
- .type = PCA9532_TYPE_LED,
- },
- { .name = "n2100:red:system",
- .state = PCA9532_OFF,
- .type = PCA9532_TYPE_LED,
- },
- { .name = "N2100 beeper" ,
- .state = PCA9532_OFF,
- .type = PCA9532_TYPE_N2100_BEEP,
- },
- },
- .psc = { 0, 0 },
- .pwm = { 0, 0 },
-};
-
-static struct i2c_board_info __initdata n2100_i2c_devices[] = {
- {
- I2C_BOARD_INFO("rs5c372b", 0x32),
- },
- {
- I2C_BOARD_INFO("f75375", 0x2e),
- .platform_data = &n2100_f75375s,
- },
- {
- I2C_BOARD_INFO("pca9532", 0x60),
- .platform_data = &n2100_leds,
- },
-};
-
-/*
- * Pull PCA9532 GPIO #8 low to power off the machine.
- */
-static void n2100_power_off(void)
-{
- local_irq_disable();
-
- /* Start condition, I2C address of PCA9532, write transaction. */
- *IOP3XX_IDBR0 = 0xc0;
- *IOP3XX_ICR0 = 0xe9;
- mdelay(1);
-
- /* Write address 0x08. */
- *IOP3XX_IDBR0 = 0x08;
- *IOP3XX_ICR0 = 0xe8;
- mdelay(1);
-
- /* Write data 0x01, stop condition. */
- *IOP3XX_IDBR0 = 0x01;
- *IOP3XX_ICR0 = 0xea;
-
- while (1)
- ;
-}
-
-static void n2100_restart(enum reboot_mode mode, const char *cmd)
-{
- int ret;
-
- ret = gpio_direction_output(N2100_HARDWARE_RESET, 0);
- if (ret) {
- pr_crit("could not drive reset GPIO low\n");
- return;
- }
- /* Wait for reset to happen */
- while (1)
- ;
-}
-
-
-static struct timer_list power_button_poll_timer;
-
-static void power_button_poll(struct timer_list *unused)
-{
- if (gpio_get_value(N2100_POWER_BUTTON) == 0) {
- ctrl_alt_del();
- return;
- }
-
- power_button_poll_timer.expires = jiffies + (HZ / 10);
- add_timer(&power_button_poll_timer);
-}
-
-static int __init n2100_request_gpios(void)
-{
- int ret;
-
- if (!machine_is_n2100())
- return 0;
-
- ret = gpio_request(N2100_HARDWARE_RESET, "reset");
- if (ret)
- pr_err("could not request reset GPIO\n");
-
- ret = gpio_request(N2100_POWER_BUTTON, "power");
- if (ret)
- pr_err("could not request power GPIO\n");
- else {
- ret = gpio_direction_input(N2100_POWER_BUTTON);
- if (ret)
- pr_err("could not set power GPIO as input\n");
- }
- /* Set up power button poll timer */
- timer_setup(&power_button_poll_timer, power_button_poll, 0);
- power_button_poll_timer.expires = jiffies + (HZ / 10);
- add_timer(&power_button_poll_timer);
- return 0;
-}
-device_initcall(n2100_request_gpios);
-
-static void __init n2100_init_machine(void)
-{
- register_iop32x_gpio();
- gpiod_add_lookup_table(&iop3xx_i2c0_gpio_lookup);
- platform_device_register(&iop3xx_i2c0_device);
- platform_device_register(&n2100_flash_device);
- platform_device_register(&n2100_serial_device);
- platform_device_register(&iop3xx_dma_0_channel);
- platform_device_register(&iop3xx_dma_1_channel);
-
- i2c_register_board_info(0, n2100_i2c_devices,
- ARRAY_SIZE(n2100_i2c_devices));
-
- pm_power_off = n2100_power_off;
-}
-
-MACHINE_START(N2100, "Thecus N2100")
- /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .atag_offset = 0x100,
- .nr_irqs = IOP32X_NR_IRQS,
- .map_io = n2100_map_io,
- .init_irq = iop32x_init_irq,
- .init_time = n2100_timer_init,
- .init_machine = n2100_init_machine,
- .restart = n2100_restart,
-MACHINE_END
diff --git a/arch/arm/mach-iop32x/n2100.h b/arch/arm/mach-iop32x/n2100.h
deleted file mode 100644
index 0b97b940d3e7..000000000000
--- a/arch/arm/mach-iop32x/n2100.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Thecus N2100 board registers
- */
-
-#ifndef __N2100_H
-#define __N2100_H
-
-#define N2100_UART 0xfe800000 /* UART */
-
-#define N2100_COPY_BUTTON IOP3XX_GPIO_LINE(0)
-#define N2100_PCA9532_RESET IOP3XX_GPIO_LINE(2)
-#define N2100_RESET_BUTTON IOP3XX_GPIO_LINE(3)
-#define N2100_HARDWARE_RESET IOP3XX_GPIO_LINE(4)
-#define N2100_POWER_BUTTON IOP3XX_GPIO_LINE(5)
-
-
-#endif
diff --git a/arch/arm/mach-iop32x/pci.c b/arch/arm/mach-iop32x/pci.c
deleted file mode 100644
index 7a215d2ee7e2..000000000000
--- a/arch/arm/mach-iop32x/pci.c
+++ /dev/null
@@ -1,404 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/plat-iop/pci.c
- *
- * PCI support for the Intel IOP32X and IOP33X processors
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-#include <asm/irq.h>
-#include <asm/signal.h>
-#include <asm/mach/pci.h>
-#include "hardware.h"
-#include "iop3xx.h"
-
-// #define DEBUG
-
-#ifdef DEBUG
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...) do { } while (0)
-#endif
-
-/*
- * This routine builds either a type0 or type1 configuration command. If the
- * bus is on the 803xx then a type0 made, else a type1 is created.
- */
-static u32 iop3xx_cfg_address(struct pci_bus *bus, int devfn, int where)
-{
- struct pci_sys_data *sys = bus->sysdata;
- u32 addr;
-
- if (sys->busnr == bus->number)
- addr = 1 << (PCI_SLOT(devfn) + 16) | (PCI_SLOT(devfn) << 11);
- else
- addr = bus->number << 16 | PCI_SLOT(devfn) << 11 | 1;
-
- addr |= PCI_FUNC(devfn) << 8 | (where & ~3);
-
- return addr;
-}
-
-/*
- * This routine checks the status of the last configuration cycle. If an error
- * was detected it returns a 1, else it returns a 0. The errors being checked
- * are parity, master abort, target abort (master and target). These types of
- * errors occur during a config cycle where there is no device, like during
- * the discovery stage.
- */
-static int iop3xx_pci_status(void)
-{
- unsigned int status;
- int ret = 0;
-
- /*
- * Check the status registers.
- */
- status = *IOP3XX_ATUSR;
- if (status & 0xf900) {
- DBG("\t\t\tPCI: P0 - status = 0x%08x\n", status);
- *IOP3XX_ATUSR = status & 0xf900;
- ret = 1;
- }
-
- status = *IOP3XX_ATUISR;
- if (status & 0x679f) {
- DBG("\t\t\tPCI: P1 - status = 0x%08x\n", status);
- *IOP3XX_ATUISR = status & 0x679f;
- ret = 1;
- }
-
- return ret;
-}
-
-/*
- * Simply write the address register and read the configuration
- * data. Note that the 4 nops ensure that we are able to handle
- * a delayed abort (in theory.)
- */
-static u32 iop3xx_read(unsigned long addr)
-{
- u32 val;
-
- __asm__ __volatile__(
- "str %1, [%2]\n\t"
- "ldr %0, [%3]\n\t"
- "nop\n\t"
- "nop\n\t"
- "nop\n\t"
- "nop\n\t"
- : "=r" (val)
- : "r" (addr), "r" (IOP3XX_OCCAR), "r" (IOP3XX_OCCDR));
-
- return val;
-}
-
-/*
- * The read routines must check the error status of the last configuration
- * cycle. If there was an error, the routine returns all hex f's.
- */
-static int
-iop3xx_read_config(struct pci_bus *bus, unsigned int devfn, int where,
- int size, u32 *value)
-{
- unsigned long addr = iop3xx_cfg_address(bus, devfn, where);
- u32 val = iop3xx_read(addr) >> ((where & 3) * 8);
-
- if (iop3xx_pci_status())
- val = 0xffffffff;
-
- *value = val;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-iop3xx_write_config(struct pci_bus *bus, unsigned int devfn, int where,
- int size, u32 value)
-{
- unsigned long addr = iop3xx_cfg_address(bus, devfn, where);
- u32 val;
-
- if (size != 4) {
- val = iop3xx_read(addr);
- if (iop3xx_pci_status())
- return PCIBIOS_SUCCESSFUL;
-
- where = (where & 3) * 8;
-
- if (size == 1)
- val &= ~(0xff << where);
- else
- val &= ~(0xffff << where);
-
- *IOP3XX_OCCDR = val | value << where;
- } else {
- asm volatile(
- "str %1, [%2]\n\t"
- "str %0, [%3]\n\t"
- "nop\n\t"
- "nop\n\t"
- "nop\n\t"
- "nop\n\t"
- :
- : "r" (value), "r" (addr),
- "r" (IOP3XX_OCCAR), "r" (IOP3XX_OCCDR));
- }
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops iop3xx_ops = {
- .read = iop3xx_read_config,
- .write = iop3xx_write_config,
-};
-
-/*
- * When a PCI device does not exist during config cycles, the 80200 gets a
- * bus error instead of returning 0xffffffff. This handler simply returns.
- */
-static int
-iop3xx_pci_abort(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
-{
- DBG("PCI abort: address = 0x%08lx fsr = 0x%03x PC = 0x%08lx LR = 0x%08lx\n",
- addr, fsr, regs->ARM_pc, regs->ARM_lr);
-
- /*
- * If it was an imprecise abort, then we need to correct the
- * return address to be _after_ the instruction.
- */
- if (fsr & (1 << 10))
- regs->ARM_pc += 4;
-
- return 0;
-}
-
-int iop3xx_pci_setup(int nr, struct pci_sys_data *sys)
-{
- struct resource *res;
- struct resource realio;
-
- if (nr != 0)
- return 0;
-
- res = kzalloc(sizeof(struct resource), GFP_KERNEL);
- if (!res)
- panic("PCI: unable to alloc resources");
-
- res->start = IOP3XX_PCI_LOWER_MEM_PA;
- res->end = IOP3XX_PCI_LOWER_MEM_PA + IOP3XX_PCI_MEM_WINDOW_SIZE - 1;
- res->name = "IOP3XX PCI Memory Space";
- res->flags = IORESOURCE_MEM;
- request_resource(&iomem_resource, res);
-
- /*
- * Use whatever translation is already setup.
- */
- sys->mem_offset = IOP3XX_PCI_LOWER_MEM_PA - *IOP3XX_OMWTVR0;
-
- pci_add_resource_offset(&sys->resources, res, sys->mem_offset);
-
- realio.start = 0;
- realio.end = realio.start + SZ_64K - 1;
- pci_remap_iospace(&realio, IOP3XX_PCI_LOWER_IO_PA);
-
- return 1;
-}
-
-void __init iop3xx_atu_setup(void)
-{
- /* BAR 0 ( Disabled ) */
- *IOP3XX_IAUBAR0 = 0x0;
- *IOP3XX_IABAR0 = 0x0;
- *IOP3XX_IATVR0 = 0x0;
- *IOP3XX_IALR0 = 0x0;
-
- /* BAR 1 ( Disabled ) */
- *IOP3XX_IAUBAR1 = 0x0;
- *IOP3XX_IABAR1 = 0x0;
- *IOP3XX_IALR1 = 0x0;
-
- /* BAR 2 (1:1 mapping with Physical RAM) */
- /* Set limit and enable */
- *IOP3XX_IALR2 = ~((u32)IOP3XX_MAX_RAM_SIZE - 1) & ~0x1;
- *IOP3XX_IAUBAR2 = 0x0;
-
- /* Align the inbound bar with the base of memory */
- *IOP3XX_IABAR2 = PHYS_OFFSET |
- PCI_BASE_ADDRESS_MEM_TYPE_64 |
- PCI_BASE_ADDRESS_MEM_PREFETCH;
-
- *IOP3XX_IATVR2 = PHYS_OFFSET;
-
- /* Outbound window 0 */
- *IOP3XX_OMWTVR0 = IOP3XX_PCI_LOWER_MEM_BA;
- *IOP3XX_OUMWTVR0 = 0;
-
- /* Outbound window 1 */
- *IOP3XX_OMWTVR1 = IOP3XX_PCI_LOWER_MEM_BA +
- IOP3XX_PCI_MEM_WINDOW_SIZE / 2;
- *IOP3XX_OUMWTVR1 = 0;
-
- /* BAR 3 ( Disabled ) */
- *IOP3XX_IAUBAR3 = 0x0;
- *IOP3XX_IABAR3 = 0x0;
- *IOP3XX_IATVR3 = 0x0;
- *IOP3XX_IALR3 = 0x0;
-
- /* Setup the I/O Bar
- */
- *IOP3XX_OIOWTVR = IOP3XX_PCI_LOWER_IO_BA;
-
- /* Enable inbound and outbound cycles
- */
- *IOP3XX_ATUCMD |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
- PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
- *IOP3XX_ATUCR |= IOP3XX_ATUCR_OUT_EN;
-}
-
-void __init iop3xx_atu_disable(void)
-{
- *IOP3XX_ATUCMD = 0;
- *IOP3XX_ATUCR = 0;
-
- /* wait for cycles to quiesce */
- while (*IOP3XX_PCSR & (IOP3XX_PCSR_OUT_Q_BUSY |
- IOP3XX_PCSR_IN_Q_BUSY))
- cpu_relax();
-
- /* BAR 0 ( Disabled ) */
- *IOP3XX_IAUBAR0 = 0x0;
- *IOP3XX_IABAR0 = 0x0;
- *IOP3XX_IATVR0 = 0x0;
- *IOP3XX_IALR0 = 0x0;
-
- /* BAR 1 ( Disabled ) */
- *IOP3XX_IAUBAR1 = 0x0;
- *IOP3XX_IABAR1 = 0x0;
- *IOP3XX_IALR1 = 0x0;
-
- /* BAR 2 ( Disabled ) */
- *IOP3XX_IAUBAR2 = 0x0;
- *IOP3XX_IABAR2 = 0x0;
- *IOP3XX_IATVR2 = 0x0;
- *IOP3XX_IALR2 = 0x0;
-
- /* BAR 3 ( Disabled ) */
- *IOP3XX_IAUBAR3 = 0x0;
- *IOP3XX_IABAR3 = 0x0;
- *IOP3XX_IATVR3 = 0x0;
- *IOP3XX_IALR3 = 0x0;
-
- /* Clear the outbound windows */
- *IOP3XX_OIOWTVR = 0;
-
- /* Outbound window 0 */
- *IOP3XX_OMWTVR0 = 0;
- *IOP3XX_OUMWTVR0 = 0;
-
- /* Outbound window 1 */
- *IOP3XX_OMWTVR1 = 0;
- *IOP3XX_OUMWTVR1 = 0;
-}
-
-/* Flag to determine whether the ATU is initialized and the PCI bus scanned */
-int init_atu;
-
-int iop3xx_get_init_atu(void) {
- /* check if default has been overridden */
- if (init_atu != IOP3XX_INIT_ATU_DEFAULT)
- return init_atu;
- else
- return IOP3XX_INIT_ATU_DISABLE;
-}
-
-static void __init iop3xx_atu_debug(void)
-{
- DBG("PCI: Intel IOP3xx PCI init.\n");
- DBG("PCI: Outbound memory window 0: PCI 0x%08x%08x\n",
- *IOP3XX_OUMWTVR0, *IOP3XX_OMWTVR0);
- DBG("PCI: Outbound memory window 1: PCI 0x%08x%08x\n",
- *IOP3XX_OUMWTVR1, *IOP3XX_OMWTVR1);
- DBG("PCI: Outbound IO window: PCI 0x%08x\n",
- *IOP3XX_OIOWTVR);
-
- DBG("PCI: Inbound memory window 0: PCI 0x%08x%08x 0x%08x -> 0x%08x\n",
- *IOP3XX_IAUBAR0, *IOP3XX_IABAR0, *IOP3XX_IALR0, *IOP3XX_IATVR0);
- DBG("PCI: Inbound memory window 1: PCI 0x%08x%08x 0x%08x\n",
- *IOP3XX_IAUBAR1, *IOP3XX_IABAR1, *IOP3XX_IALR1);
- DBG("PCI: Inbound memory window 2: PCI 0x%08x%08x 0x%08x -> 0x%08x\n",
- *IOP3XX_IAUBAR2, *IOP3XX_IABAR2, *IOP3XX_IALR2, *IOP3XX_IATVR2);
- DBG("PCI: Inbound memory window 3: PCI 0x%08x%08x 0x%08x -> 0x%08x\n",
- *IOP3XX_IAUBAR3, *IOP3XX_IABAR3, *IOP3XX_IALR3, *IOP3XX_IATVR3);
-
- DBG("PCI: Expansion ROM window: PCI 0x%08x%08x 0x%08x -> 0x%08x\n",
- 0, *IOP3XX_ERBAR, *IOP3XX_ERLR, *IOP3XX_ERTVR);
-
- DBG("ATU: IOP3XX_ATUCMD=0x%04x\n", *IOP3XX_ATUCMD);
- DBG("ATU: IOP3XX_ATUCR=0x%08x\n", *IOP3XX_ATUCR);
-
- hook_fault_code(16+6, iop3xx_pci_abort, SIGBUS, 0, "imprecise external abort");
-}
-
-/* for platforms that might be host-bus-adapters */
-void __init iop3xx_pci_preinit_cond(void)
-{
- if (iop3xx_get_init_atu() == IOP3XX_INIT_ATU_ENABLE) {
- iop3xx_atu_disable();
- iop3xx_atu_setup();
- iop3xx_atu_debug();
- }
-}
-
-void __init iop3xx_pci_preinit(void)
-{
- pcibios_min_mem = 0;
-
- iop3xx_atu_disable();
- iop3xx_atu_setup();
- iop3xx_atu_debug();
-}
-
-/* allow init_atu to be user overridden */
-static int __init iop3xx_init_atu_setup(char *str)
-{
- init_atu = IOP3XX_INIT_ATU_DEFAULT;
- if (str) {
- while (*str != '\0') {
- switch (*str) {
- case 'y':
- case 'Y':
- init_atu = IOP3XX_INIT_ATU_ENABLE;
- break;
- case 'n':
- case 'N':
- init_atu = IOP3XX_INIT_ATU_DISABLE;
- break;
- case ',':
- case '=':
- break;
- default:
- printk(KERN_DEBUG "\"%s\" malformed at "
- "character: \'%c\'",
- __func__,
- *str);
- *(str + 1) = '\0';
- }
- str++;
- }
- }
-
- return 1;
-}
-
-__setup("iop3xx_init_atu", iop3xx_init_atu_setup);
-
diff --git a/arch/arm/mach-iop32x/pmu.c b/arch/arm/mach-iop32x/pmu.c
deleted file mode 100644
index bdbc7a3cb8a3..000000000000
--- a/arch/arm/mach-iop32x/pmu.c
+++ /dev/null
@@ -1,29 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * PMU IRQ registration for the iop3xx xscale PMU families.
- * Copyright (C) 2010 Will Deacon, ARM Ltd.
- */
-
-#include <linux/platform_device.h>
-#include "irqs.h"
-
-static struct resource pmu_resource = {
- .start = IRQ_IOP32X_CORE_PMU,
- .end = IRQ_IOP32X_CORE_PMU,
- .flags = IORESOURCE_IRQ,
-};
-
-static struct platform_device pmu_device = {
- .name = "xscale-pmu",
- .id = -1,
- .resource = &pmu_resource,
- .num_resources = 1,
-};
-
-static int __init iop3xx_pmu_init(void)
-{
- platform_device_register(&pmu_device);
- return 0;
-}
-
-arch_initcall(iop3xx_pmu_init);
diff --git a/arch/arm/mach-iop32x/restart.c b/arch/arm/mach-iop32x/restart.c
deleted file mode 100644
index 3dfa54d3a7a8..000000000000
--- a/arch/arm/mach-iop32x/restart.c
+++ /dev/null
@@ -1,17 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * restart.c
- *
- * Copyright (C) 2001 MontaVista Software, Inc.
- */
-#include <asm/system_misc.h>
-#include "hardware.h"
-#include "iop3xx.h"
-
-void iop3xx_restart(enum reboot_mode mode, const char *cmd)
-{
- *IOP3XX_PCSR = 0x30;
-
- /* Jump into ROM at address 0 */
- soft_restart(0);
-}
diff --git a/arch/arm/mach-iop32x/setup.c b/arch/arm/mach-iop32x/setup.c
deleted file mode 100644
index a0a81c28a632..000000000000
--- a/arch/arm/mach-iop32x/setup.c
+++ /dev/null
@@ -1,31 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/plat-iop/setup.c
- *
- * Author: Nicolas Pitre <nico@fluxnic.net>
- * Copyright (C) 2001 MontaVista Software, Inc.
- * Copyright (C) 2004 Intel Corporation.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <asm/mach/map.h>
-#include "iop3xx.h"
-
-/*
- * Standard IO mapping for all IOP3xx based systems. Note that
- * the IOP3xx OCCDR must be mapped uncached and unbuffered.
- */
-static struct map_desc iop3xx_std_desc[] __initdata = {
- { /* mem mapped registers */
- .virtual = IOP3XX_PERIPHERAL_VIRT_BASE,
- .pfn = __phys_to_pfn(IOP3XX_PERIPHERAL_PHYS_BASE),
- .length = IOP3XX_PERIPHERAL_SIZE,
- .type = MT_UNCACHED,
- },
-};
-
-void __init iop3xx_map_io(void)
-{
- iotable_init(iop3xx_std_desc, ARRAY_SIZE(iop3xx_std_desc));
-}
diff --git a/arch/arm/mach-iop32x/time.c b/arch/arm/mach-iop32x/time.c
deleted file mode 100644
index ae533b66fefd..000000000000
--- a/arch/arm/mach-iop32x/time.c
+++ /dev/null
@@ -1,179 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/plat-iop/time.c
- *
- * Timer code for IOP32x and IOP33x based systems
- *
- * Author: Deepak Saxena <dsaxena@mvista.com>
- *
- * Copyright 2002-2003 MontaVista Software Inc.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/time.h>
-#include <linux/init.h>
-#include <linux/timex.h>
-#include <linux/io.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-#include <linux/export.h>
-#include <linux/sched_clock.h>
-#include <asm/irq.h>
-#include <linux/uaccess.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-
-#include "hardware.h"
-#include "irqs.h"
-
-/*
- * Minimum clocksource/clockevent timer range in seconds
- */
-#define IOP_MIN_RANGE 4
-
-/*
- * IOP clocksource (free-running timer 1).
- */
-static u64 notrace iop_clocksource_read(struct clocksource *unused)
-{
- return 0xffffffffu - read_tcr1();
-}
-
-static struct clocksource iop_clocksource = {
- .name = "iop_timer1",
- .rating = 300,
- .read = iop_clocksource_read,
- .mask = CLOCKSOURCE_MASK(32),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-/*
- * IOP sched_clock() implementation via its clocksource.
- */
-static u64 notrace iop_read_sched_clock(void)
-{
- return 0xffffffffu - read_tcr1();
-}
-
-/*
- * IOP clockevents (interrupting timer 0).
- */
-static int iop_set_next_event(unsigned long delta,
- struct clock_event_device *unused)
-{
- u32 tmr = IOP_TMR_PRIVILEGED | IOP_TMR_RATIO_1_1;
-
- BUG_ON(delta == 0);
- write_tmr0(tmr & ~(IOP_TMR_EN | IOP_TMR_RELOAD));
- write_tcr0(delta);
- write_tmr0((tmr & ~IOP_TMR_RELOAD) | IOP_TMR_EN);
-
- return 0;
-}
-
-static unsigned long ticks_per_jiffy;
-
-static int iop_set_periodic(struct clock_event_device *evt)
-{
- u32 tmr = read_tmr0();
-
- write_tmr0(tmr & ~IOP_TMR_EN);
- write_tcr0(ticks_per_jiffy - 1);
- write_trr0(ticks_per_jiffy - 1);
- tmr |= (IOP_TMR_RELOAD | IOP_TMR_EN);
-
- write_tmr0(tmr);
- return 0;
-}
-
-static int iop_set_oneshot(struct clock_event_device *evt)
-{
- u32 tmr = read_tmr0();
-
- /* ->set_next_event sets period and enables timer */
- tmr &= ~(IOP_TMR_RELOAD | IOP_TMR_EN);
- write_tmr0(tmr);
- return 0;
-}
-
-static int iop_shutdown(struct clock_event_device *evt)
-{
- u32 tmr = read_tmr0();
-
- tmr &= ~IOP_TMR_EN;
- write_tmr0(tmr);
- return 0;
-}
-
-static int iop_resume(struct clock_event_device *evt)
-{
- u32 tmr = read_tmr0();
-
- tmr |= IOP_TMR_EN;
- write_tmr0(tmr);
- return 0;
-}
-
-static struct clock_event_device iop_clockevent = {
- .name = "iop_timer0",
- .features = CLOCK_EVT_FEAT_PERIODIC |
- CLOCK_EVT_FEAT_ONESHOT,
- .rating = 300,
- .set_next_event = iop_set_next_event,
- .set_state_shutdown = iop_shutdown,
- .set_state_periodic = iop_set_periodic,
- .tick_resume = iop_resume,
- .set_state_oneshot = iop_set_oneshot,
-};
-
-static irqreturn_t
-iop_timer_interrupt(int irq, void *dev_id)
-{
- struct clock_event_device *evt = dev_id;
-
- write_tisr(1);
- evt->event_handler(evt);
- return IRQ_HANDLED;
-}
-
-static unsigned long iop_tick_rate;
-unsigned long get_iop_tick_rate(void)
-{
- return iop_tick_rate;
-}
-EXPORT_SYMBOL(get_iop_tick_rate);
-
-void __init iop_init_time(unsigned long tick_rate)
-{
- u32 timer_ctl;
- int irq = IRQ_IOP32X_TIMER0;
-
- sched_clock_register(iop_read_sched_clock, 32, tick_rate);
-
- ticks_per_jiffy = DIV_ROUND_CLOSEST(tick_rate, HZ);
- iop_tick_rate = tick_rate;
-
- timer_ctl = IOP_TMR_EN | IOP_TMR_PRIVILEGED |
- IOP_TMR_RELOAD | IOP_TMR_RATIO_1_1;
-
- /*
- * Set up interrupting clockevent timer 0.
- */
- write_tmr0(timer_ctl & ~IOP_TMR_EN);
- write_tisr(1);
- if (request_irq(irq, iop_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
- "IOP Timer Tick", &iop_clockevent))
- pr_err("Failed to request irq() %d (IOP Timer Tick)\n", irq);
- iop_clockevent.cpumask = cpumask_of(0);
- clockevents_config_and_register(&iop_clockevent, tick_rate,
- 0xf, 0xfffffffe);
-
- /*
- * Set up free-running clocksource timer 1.
- */
- write_trr1(0xffffffff);
- write_tcr1(0xffffffff);
- write_tmr1(timer_ctl);
- clocksource_register_hz(&iop_clocksource, tick_rate);
-}
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 264e780ae32e..e488e1b8e803 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -723,11 +723,11 @@ config I2C_IMX_LPI2C
will be called i2c-imx-lpi2c.
config I2C_IOP3XX
- tristate "Intel IOPx3xx and IXP4xx on-chip I2C interface"
- depends on ARCH_IOP32X || ARCH_IXP4XX || COMPILE_TEST
+ tristate "Intel IXP4xx on-chip I2C interface"
+ depends on ARCH_IXP4XX || COMPILE_TEST
help
Say Y here if you want to use the IIC bus controller on
- the Intel IOPx3xx I/O Processors or IXP4xx Network Processors.
+ the Intel IXP4xx Network Processors.
This driver can also be built as a module. If so, the module
will be called i2c-iop3xx.
--
2.29.2
WARNING: multiple messages have this Message-ID (diff)
From: Arnd Bergmann <arnd@kernel.org>
To: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org, Arnd Bergmann <arnd@arndb.de>,
Dan Williams <dan.j.williams@intel.com>,
Lennert Buytenhek <kernel@wantstofly.org>,
Martin Michlmayr <tbm@cyrius.com>,
linux-i2c@vger.kernel.org
Subject: [PATCH 09/17] ARM: iop32x: remove the platform
Date: Wed, 19 Oct 2022 17:03:31 +0200 [thread overview]
Message-ID: <20221019150410.3851944-9-arnd@kernel.org> (raw)
In-Reply-To: <20221019150410.3851944-1-arnd@kernel.org>
From: Arnd Bergmann <arnd@arndb.de>
This was marked as unused in 5.19 and can now be removed
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Lennert Buytenhek <kernel@wantstofly.org>
Cc: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
MAINTAINERS | 30 ---
arch/arm/Kconfig | 4 +-
arch/arm/Kconfig.debug | 6 +-
arch/arm/Makefile | 1 -
arch/arm/configs/iop32x_defconfig | 126 ---------
arch/arm/kernel/entry-common.S | 15 --
arch/arm/mach-iop32x/Kconfig | 54 ----
arch/arm/mach-iop32x/Makefile | 20 --
arch/arm/mach-iop32x/adma.c | 163 ------------
arch/arm/mach-iop32x/cp6.c | 48 ----
arch/arm/mach-iop32x/em7210.c | 232 -----------------
arch/arm/mach-iop32x/glantank.c | 214 ---------------
arch/arm/mach-iop32x/glantank.h | 12 -
arch/arm/mach-iop32x/gpio-iop32x.h | 11 -
arch/arm/mach-iop32x/hardware.h | 38 ---
arch/arm/mach-iop32x/i2c.c | 92 -------
arch/arm/mach-iop32x/iop3xx.h | 326 -----------------------
arch/arm/mach-iop32x/iq31244.c | 333 ------------------------
arch/arm/mach-iop32x/iq31244.h | 16 --
arch/arm/mach-iop32x/iq80321.c | 192 --------------
arch/arm/mach-iop32x/iq80321.h | 16 --
arch/arm/mach-iop32x/irq.c | 95 -------
arch/arm/mach-iop32x/irqs.h | 48 ----
arch/arm/mach-iop32x/n2100.c | 367 --------------------------
arch/arm/mach-iop32x/n2100.h | 18 --
arch/arm/mach-iop32x/pci.c | 404 -----------------------------
arch/arm/mach-iop32x/pmu.c | 29 ---
arch/arm/mach-iop32x/restart.c | 17 --
arch/arm/mach-iop32x/setup.c | 31 ---
arch/arm/mach-iop32x/time.c | 179 -------------
drivers/i2c/busses/Kconfig | 6 +-
31 files changed, 6 insertions(+), 3137 deletions(-)
delete mode 100644 arch/arm/configs/iop32x_defconfig
delete mode 100644 arch/arm/mach-iop32x/Kconfig
delete mode 100644 arch/arm/mach-iop32x/Makefile
delete mode 100644 arch/arm/mach-iop32x/adma.c
delete mode 100644 arch/arm/mach-iop32x/cp6.c
delete mode 100644 arch/arm/mach-iop32x/em7210.c
delete mode 100644 arch/arm/mach-iop32x/glantank.c
delete mode 100644 arch/arm/mach-iop32x/glantank.h
delete mode 100644 arch/arm/mach-iop32x/gpio-iop32x.h
delete mode 100644 arch/arm/mach-iop32x/hardware.h
delete mode 100644 arch/arm/mach-iop32x/i2c.c
delete mode 100644 arch/arm/mach-iop32x/iop3xx.h
delete mode 100644 arch/arm/mach-iop32x/iq31244.c
delete mode 100644 arch/arm/mach-iop32x/iq31244.h
delete mode 100644 arch/arm/mach-iop32x/iq80321.c
delete mode 100644 arch/arm/mach-iop32x/iq80321.h
delete mode 100644 arch/arm/mach-iop32x/irq.c
delete mode 100644 arch/arm/mach-iop32x/irqs.h
delete mode 100644 arch/arm/mach-iop32x/n2100.c
delete mode 100644 arch/arm/mach-iop32x/n2100.h
delete mode 100644 arch/arm/mach-iop32x/pci.c
delete mode 100644 arch/arm/mach-iop32x/pmu.c
delete mode 100644 arch/arm/mach-iop32x/restart.c
delete mode 100644 arch/arm/mach-iop32x/setup.c
delete mode 100644 arch/arm/mach-iop32x/time.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 89f72dba8e64..da1ff468e27d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2215,21 +2215,6 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-pxa/colibri-pxa270-income.c
-ARM/INTEL IOP32X ARM ARCHITECTURE
-M: Lennert Buytenhek <kernel@wantstofly.org>
-L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S: Maintained
-
-ARM/INTEL IQ81342EX MACHINE SUPPORT
-M: Lennert Buytenhek <kernel@wantstofly.org>
-L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S: Maintained
-
-ARM/INTEL IXDP2850 MACHINE SUPPORT
-M: Lennert Buytenhek <kernel@wantstofly.org>
-L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S: Maintained
-
ARM/INTEL IXP4XX ARM ARCHITECTURE
M: Linus Walleij <linusw@kernel.org>
M: Imre Kaloz <kaloz@openwrt.org>
@@ -2635,11 +2620,6 @@ F: include/dt-bindings/*/qcom*
F: include/linux/*/qcom*
F: include/linux/soc/qcom/
-ARM/RADISYS ENP2611 MACHINE SUPPORT
-M: Lennert Buytenhek <kernel@wantstofly.org>
-L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S: Maintained
-
ARM/RDA MICRO ARCHITECTURE
M: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -2971,11 +2951,6 @@ F: arch/arm64/boot/dts/ti/Makefile
F: arch/arm64/boot/dts/ti/k3-*
F: include/dt-bindings/pinctrl/k3.h
-ARM/THECUS N2100 MACHINE SUPPORT
-M: Lennert Buytenhek <kernel@wantstofly.org>
-L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S: Maintained
-
ARM/TOSA MACHINE SUPPORT
M: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
M: Dirk Opfer <dirk@opfer-online.de>
@@ -10307,11 +10282,6 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git
F: drivers/iommu/intel/
F: include/linux/intel-svm.h
-INTEL IOP-ADMA DMA DRIVER
-R: Dan Williams <dan.j.williams@intel.com>
-S: Odd fixes
-F: drivers/dma/iop-adma.c
-
INTEL IPU3 CSI-2 CIO2 DRIVER
M: Yong Zhi <yong.zhi@intel.com>
M: Sakari Ailus <sakari.ailus@linux.intel.com>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index e58dab0303e6..698d88343e8e 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -280,7 +280,7 @@ config PHYS_OFFSET
default 0x00000000 if ARCH_FOOTBRIDGE
default 0x10000000 if ARCH_OMAP1 || ARCH_RPC
default 0x30000000 if ARCH_S3C24XX
- default 0xa0000000 if ARCH_IOP32X || ARCH_PXA
+ default 0xa0000000 if ARCH_PXA
default 0xc0000000 if ARCH_EP93XX || ARCH_SA1100
default 0
help
@@ -455,8 +455,6 @@ source "arch/arm/mach-hpe/Kconfig"
source "arch/arm/mach-imx/Kconfig"
-source "arch/arm/mach-iop32x/Kconfig"
-
source "arch/arm/mach-ixp4xx/Kconfig"
source "arch/arm/mach-keystone/Kconfig"
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 3b11e1d04625..320c93fabb21 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -1610,7 +1610,7 @@ config DEBUG_UART_PL01X
# Compatibility options for 8250
config DEBUG_UART_8250
- def_bool ARCH_IOP32X || ARCH_IXP4XX || ARCH_RPC
+ def_bool ARCH_IXP4XX || ARCH_RPC
config DEBUG_UART_PHYS
hex "Physical base address of debug UART"
@@ -1720,7 +1720,6 @@ config DEBUG_UART_PHYS
default 0xfcb00000 if DEBUG_HI3620_UART
default 0xfd883000 if DEBUG_ALPINE_UART0
default 0xfe531000 if DEBUG_STIH41X_SBC_ASC1
- default 0xfe800000 if ARCH_IOP32X
default 0xfed32000 if DEBUG_STIH41X_ASC2
default 0xff690000 if DEBUG_RK32_UART2
default 0xffc02000 if DEBUG_SOCFPGA_UART0
@@ -1825,7 +1824,6 @@ config DEBUG_UART_VIRT
default 0xfe018000 if DEBUG_MMP_UART3
default 0xfe100000 if DEBUG_IMX23_UART || DEBUG_IMX28_UART
default 0xfe300000 if DEBUG_BCM_KONA_UART
- default 0xfe800000 if ARCH_IOP32X
default 0xfeb00000 if DEBUG_HI3620_UART || DEBUG_HIX5HD2_UART
default 0xfeb24000 if DEBUG_RK3X_UART0
default 0xfeb26000 if DEBUG_RK3X_UART1
@@ -1867,7 +1865,7 @@ config DEBUG_UART_VIRT
config DEBUG_UART_8250_SHIFT
int "Register offset shift for the 8250 debug UART"
depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
- default 0 if DEBUG_FOOTBRIDGE_COM1 || ARCH_IOP32X || DEBUG_BCM_5301X || \
+ default 0 if DEBUG_FOOTBRIDGE_COM1 || DEBUG_BCM_5301X || \
DEBUG_BCM_HR2 || DEBUG_OMAP7XXUART1 || DEBUG_OMAP7XXUART2 || \
DEBUG_OMAP7XXUART3
default 3 if DEBUG_MSTARV7_PMUART
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index beda22911feb..1a62035d1207 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -179,7 +179,6 @@ machine-$(CONFIG_ARCH_GEMINI) += gemini
machine-$(CONFIG_ARCH_HIGHBANK) += highbank
machine-$(CONFIG_ARCH_HISI) += hisi
machine-$(CONFIG_ARCH_HPE) += hpe
-machine-$(CONFIG_ARCH_IOP32X) += iop32x
machine-$(CONFIG_ARCH_IXP4XX) += ixp4xx
machine-$(CONFIG_ARCH_KEYSTONE) += keystone
machine-$(CONFIG_ARCH_LPC18XX) += lpc18xx
diff --git a/arch/arm/configs/iop32x_defconfig b/arch/arm/configs/iop32x_defconfig
deleted file mode 100644
index 19e30e790d35..000000000000
--- a/arch/arm/configs/iop32x_defconfig
+++ /dev/null
@@ -1,126 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_IOP32X=y
-CONFIG_MACH_GLANTANK=y
-CONFIG_ARCH_IQ80321=y
-CONFIG_ARCH_IQ31244=y
-CONFIG_MACH_N2100=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp cachepolicy=writealloc"
-CONFIG_FPE_NWFPE=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_SLAB=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IPV6=y
-# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_IPV6_SIT is not set
-CONFIG_MTD=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_NBD=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ATA=y
-CONFIG_SATA_SIL=y
-CONFIG_SATA_VITESSE=y
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=y
-CONFIG_MD_RAID0=y
-CONFIG_MD_RAID1=y
-CONFIG_MD_RAID10=y
-CONFIG_MD_RAID456=y
-CONFIG_BLK_DEV_DM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_E100=y
-CONFIG_E1000=y
-CONFIG_R8169=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_IOP3XX=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_EHCI_TT_NEWSCHED=y
-CONFIG_USB_UHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_RS5C372=y
-CONFIG_DMADEVICES=y
-CONFIG_INTEL_IOP_ADMA=y
-CONFIG_NET_DMA=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_TMPFS=y
-CONFIG_ECRYPT_FS=y
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_KEYS=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_LRW=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=y
-CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_TGR192=y
-CONFIG_CRYPTO_WP512=y
-CONFIG_CRYPTO_AES=y
-CONFIG_CRYPTO_ANUBIS=y
-CONFIG_CRYPTO_ARC4=y
-CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_CAST5=y
-CONFIG_CRYPTO_CAST6=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_KHAZAD=y
-CONFIG_CRYPTO_SERPENT=y
-CONFIG_CRYPTO_TEA=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_LIBCRC32C=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_LL_UART_8250=y
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 405a607b754f..03d4c5578c5c 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -16,15 +16,6 @@
.equ NR_syscalls, __NR_syscalls
- .macro arch_ret_to_user, tmp
-#ifdef CONFIG_ARCH_IOP32X
- mrc p15, 0, \tmp, c15, c1, 0
- tst \tmp, #(1 << 6)
- bicne \tmp, \tmp, #(1 << 6)
- mcrne p15, 0, \tmp, c15, c1, 0 @ Disable cp6 access
-#endif
- .endm
-
#include "entry-header.S"
saved_psr .req r8
@@ -55,10 +46,6 @@ __ret_fast_syscall:
movs r1, r1, lsl #16
bne fast_work_pending
-
- /* perform architecture specific actions before user return */
- arch_ret_to_user r1
-
restore_user_regs fast = 1, offset = S_OFF
UNWIND(.fnend )
ENDPROC(ret_fast_syscall)
@@ -129,8 +116,6 @@ ENTRY(ret_to_user_from_irq)
no_work_pending:
asm_trace_hardirqs_on save = 0
- /* perform architecture specific actions before user return */
- arch_ret_to_user r1
ct_user_enter save = 0
restore_user_regs fast = 0, offset = 0
diff --git a/arch/arm/mach-iop32x/Kconfig b/arch/arm/mach-iop32x/Kconfig
deleted file mode 100644
index 761fbb04faa1..000000000000
--- a/arch/arm/mach-iop32x/Kconfig
+++ /dev/null
@@ -1,54 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-menuconfig ARCH_IOP32X
- bool "IOP32x-based platforms"
- depends on ARCH_MULTI_V5
- depends on CPU_LITTLE_ENDIAN
- depends on ATAGS && UNUSED_BOARD_FILES
- select CPU_XSCALE
- select GPIO_IOP
- select GPIOLIB
- select FORCE_PCI
- help
- Support for Intel's 80219 and IOP32X (XScale) family of
- processors.
-
-if ARCH_IOP32X
-
-config MACH_EP80219
- bool
-
-config MACH_GLANTANK
- bool "Enable support for the IO-Data GLAN Tank"
- help
- Say Y here if you want to run your kernel on the GLAN Tank
- NAS appliance or machines from IO-Data's HDL-Gxxx, HDL-GWxxx
- and HDL-GZxxx series.
-
-config ARCH_IQ80321
- bool "Enable support for IQ80321"
- help
- Say Y here if you want to run your kernel on the Intel IQ80321
- evaluation kit for the IOP321 processor.
-
-config ARCH_IQ31244
- bool "Enable support for EP80219/IQ31244"
- select MACH_EP80219
- help
- Say Y here if you want to run your kernel on the Intel EP80219
- evaluation kit for the Intel 80219 processor (a IOP321 variant)
- or the IQ31244 evaluation kit for the IOP321 processor.
-
-config MACH_N2100
- bool "Enable support for the Thecus n2100"
- help
- Say Y here if you want to run your kernel on the Thecus n2100
- NAS appliance.
-
-config MACH_EM7210
- bool "Enable support for the Lanner EM7210"
- help
- Say Y here if you want to run your kernel on the Lanner EM7210
- board. Say also Y here if you have a SS4000e Baxter Creek NAS
- appliance."
-
-endif
diff --git a/arch/arm/mach-iop32x/Makefile b/arch/arm/mach-iop32x/Makefile
deleted file mode 100644
index c8018ef5c6a9..000000000000
--- a/arch/arm/mach-iop32x/Makefile
+++ /dev/null
@@ -1,20 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the linux kernel.
-#
-
-obj-$(CONFIG_ARCH_IOP32X) += irq.o
-obj-$(CONFIG_ARCH_IOP32X) += i2c.o
-obj-$(CONFIG_ARCH_IOP32X) += pci.o
-obj-$(CONFIG_ARCH_IOP32X) += setup.o
-obj-$(CONFIG_ARCH_IOP32X) += time.o
-obj-$(CONFIG_ARCH_IOP32X) += cp6.o
-obj-$(CONFIG_ARCH_IOP32X) += adma.o
-obj-$(CONFIG_ARCH_IOP32X) += pmu.o
-obj-$(CONFIG_ARCH_IOP32X) += restart.o
-
-obj-$(CONFIG_MACH_GLANTANK) += glantank.o
-obj-$(CONFIG_ARCH_IQ80321) += iq80321.o
-obj-$(CONFIG_ARCH_IQ31244) += iq31244.o
-obj-$(CONFIG_MACH_N2100) += n2100.o
-obj-$(CONFIG_MACH_EM7210) += em7210.o
diff --git a/arch/arm/mach-iop32x/adma.c b/arch/arm/mach-iop32x/adma.c
deleted file mode 100644
index 764bcbff98df..000000000000
--- a/arch/arm/mach-iop32x/adma.c
+++ /dev/null
@@ -1,163 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * platform device definitions for the iop3xx dma/xor engines
- * Copyright © 2006, Intel Corporation.
- */
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_data/dma-iop32x.h>
-
-#include "iop3xx.h"
-#include "irqs.h"
-
-#define IRQ_DMA0_EOT IRQ_IOP32X_DMA0_EOT
-#define IRQ_DMA0_EOC IRQ_IOP32X_DMA0_EOC
-#define IRQ_DMA0_ERR IRQ_IOP32X_DMA0_ERR
-
-#define IRQ_DMA1_EOT IRQ_IOP32X_DMA1_EOT
-#define IRQ_DMA1_EOC IRQ_IOP32X_DMA1_EOC
-#define IRQ_DMA1_ERR IRQ_IOP32X_DMA1_ERR
-
-#define IRQ_AA_EOT IRQ_IOP32X_AA_EOT
-#define IRQ_AA_EOC IRQ_IOP32X_AA_EOC
-#define IRQ_AA_ERR IRQ_IOP32X_AA_ERR
-
-/* AAU and DMA Channels */
-static struct resource iop3xx_dma_0_resources[] = {
- [0] = {
- .start = IOP3XX_DMA_PHYS_BASE(0),
- .end = IOP3XX_DMA_UPPER_PA(0),
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_DMA0_EOT,
- .end = IRQ_DMA0_EOT,
- .flags = IORESOURCE_IRQ
- },
- [2] = {
- .start = IRQ_DMA0_EOC,
- .end = IRQ_DMA0_EOC,
- .flags = IORESOURCE_IRQ
- },
- [3] = {
- .start = IRQ_DMA0_ERR,
- .end = IRQ_DMA0_ERR,
- .flags = IORESOURCE_IRQ
- }
-};
-
-static struct resource iop3xx_dma_1_resources[] = {
- [0] = {
- .start = IOP3XX_DMA_PHYS_BASE(1),
- .end = IOP3XX_DMA_UPPER_PA(1),
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_DMA1_EOT,
- .end = IRQ_DMA1_EOT,
- .flags = IORESOURCE_IRQ
- },
- [2] = {
- .start = IRQ_DMA1_EOC,
- .end = IRQ_DMA1_EOC,
- .flags = IORESOURCE_IRQ
- },
- [3] = {
- .start = IRQ_DMA1_ERR,
- .end = IRQ_DMA1_ERR,
- .flags = IORESOURCE_IRQ
- }
-};
-
-
-static struct resource iop3xx_aau_resources[] = {
- [0] = {
- .start = IOP3XX_AAU_PHYS_BASE,
- .end = IOP3XX_AAU_UPPER_PA,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_AA_EOT,
- .end = IRQ_AA_EOT,
- .flags = IORESOURCE_IRQ
- },
- [2] = {
- .start = IRQ_AA_EOC,
- .end = IRQ_AA_EOC,
- .flags = IORESOURCE_IRQ
- },
- [3] = {
- .start = IRQ_AA_ERR,
- .end = IRQ_AA_ERR,
- .flags = IORESOURCE_IRQ
- }
-};
-
-static u64 iop3xx_adma_dmamask = DMA_BIT_MASK(32);
-
-static struct iop_adma_platform_data iop3xx_dma_0_data = {
- .hw_id = DMA0_ID,
- .pool_size = PAGE_SIZE,
-};
-
-static struct iop_adma_platform_data iop3xx_dma_1_data = {
- .hw_id = DMA1_ID,
- .pool_size = PAGE_SIZE,
-};
-
-static struct iop_adma_platform_data iop3xx_aau_data = {
- .hw_id = AAU_ID,
- .pool_size = 3 * PAGE_SIZE,
-};
-
-struct platform_device iop3xx_dma_0_channel = {
- .name = "iop-adma",
- .id = 0,
- .num_resources = 4,
- .resource = iop3xx_dma_0_resources,
- .dev = {
- .dma_mask = &iop3xx_adma_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = (void *) &iop3xx_dma_0_data,
- },
-};
-
-struct platform_device iop3xx_dma_1_channel = {
- .name = "iop-adma",
- .id = 1,
- .num_resources = 4,
- .resource = iop3xx_dma_1_resources,
- .dev = {
- .dma_mask = &iop3xx_adma_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = (void *) &iop3xx_dma_1_data,
- },
-};
-
-struct platform_device iop3xx_aau_channel = {
- .name = "iop-adma",
- .id = 2,
- .num_resources = 4,
- .resource = iop3xx_aau_resources,
- .dev = {
- .dma_mask = &iop3xx_adma_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = (void *) &iop3xx_aau_data,
- },
-};
-
-static int __init iop3xx_adma_cap_init(void)
-{
- dma_cap_set(DMA_MEMCPY, iop3xx_dma_0_data.cap_mask);
- dma_cap_set(DMA_INTERRUPT, iop3xx_dma_0_data.cap_mask);
-
- dma_cap_set(DMA_MEMCPY, iop3xx_dma_1_data.cap_mask);
- dma_cap_set(DMA_INTERRUPT, iop3xx_dma_1_data.cap_mask);
-
- dma_cap_set(DMA_XOR, iop3xx_aau_data.cap_mask);
- dma_cap_set(DMA_INTERRUPT, iop3xx_aau_data.cap_mask);
-
- return 0;
-}
-
-arch_initcall(iop3xx_adma_cap_init);
diff --git a/arch/arm/mach-iop32x/cp6.c b/arch/arm/mach-iop32x/cp6.c
deleted file mode 100644
index 7135a0ac9949..000000000000
--- a/arch/arm/mach-iop32x/cp6.c
+++ /dev/null
@@ -1,48 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * IOP Coprocessor-6 access handler
- * Copyright (c) 2006, Intel Corporation.
- */
-#include <linux/init.h>
-#include <asm/traps.h>
-#include <asm/ptrace.h>
-
-#include "iop3xx.h"
-
-void iop_enable_cp6(void)
-{
- u32 temp;
-
- /* enable cp6 access */
- asm volatile (
- "mrc p15, 0, %0, c15, c1, 0\n\t"
- "orr %0, %0, #(1 << 6)\n\t"
- "mcr p15, 0, %0, c15, c1, 0\n\t"
- "mrc p15, 0, %0, c15, c1, 0\n\t"
- "mov %0, %0\n\t"
- "sub pc, pc, #4 @ cp_wait\n\t"
- : "=r"(temp));
-}
-
-static int cp6_trap(struct pt_regs *regs, unsigned int instr)
-{
- iop_enable_cp6();
-
- return 0;
-}
-
-/* permit kernel space cp6 access
- * deny user space cp6 access
- */
-static struct undef_hook cp6_hook = {
- .instr_mask = 0x0f000ff0,
- .instr_val = 0x0e000610,
- .cpsr_mask = MODE_MASK,
- .cpsr_val = SVC_MODE,
- .fn = cp6_trap,
-};
-
-void __init iop_init_cp6_handler(void)
-{
- register_undef_hook(&cp6_hook);
-}
diff --git a/arch/arm/mach-iop32x/em7210.c b/arch/arm/mach-iop32x/em7210.c
deleted file mode 100644
index ac130aba5a6e..000000000000
--- a/arch/arm/mach-iop32x/em7210.c
+++ /dev/null
@@ -1,232 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-iop32x/em7210.c
- *
- * Board support code for the Lanner EM7210 platforms.
- *
- * Based on arch/arm/mach-iop32x/iq31244.c file.
- *
- * Copyright (C) 2007 Arnaud Patard <arnaud.patard@rtp-net.org>
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/pm.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/pci.h>
-#include <asm/mach/time.h>
-#include <asm/mach-types.h>
-
-#include "hardware.h"
-#include "gpio-iop32x.h"
-#include "irqs.h"
-
-static void __init em7210_timer_init(void)
-{
- /* http://www.kwaak.net/fotos/fotos-nas/slide_24.html */
- /* 33.333 MHz crystal. */
- iop_init_time(200000000);
-}
-
-/*
- * EM7210 RTC
- */
-static struct i2c_board_info __initdata em7210_i2c_devices[] = {
- {
- I2C_BOARD_INFO("rs5c372a", 0x32),
- },
-};
-
-/*
- * EM7210 I/O
- */
-static struct map_desc em7210_io_desc[] __initdata = {
- { /* on-board devices */
- .virtual = IQ31244_UART,
- .pfn = __phys_to_pfn(IQ31244_UART),
- .length = 0x00100000,
- .type = MT_DEVICE,
- },
-};
-
-void __init em7210_map_io(void)
-{
- iop3xx_map_io();
- iotable_init(em7210_io_desc, ARRAY_SIZE(em7210_io_desc));
-}
-
-
-/*
- * EM7210 PCI
- */
-#define INTA IRQ_IOP32X_XINT0
-#define INTB IRQ_IOP32X_XINT1
-#define INTC IRQ_IOP32X_XINT2
-#define INTD IRQ_IOP32X_XINT3
-
-static int __init
-em7210_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- static int pci_irq_table[][4] = {
- /*
- * PCI IDSEL/INTPIN->INTLINE
- * A B C D
- */
- {INTB, INTB, INTB, INTB}, /* console / uart */
- {INTA, INTA, INTA, INTA}, /* 1st 82541 */
- {INTD, INTD, INTD, INTD}, /* 2nd 82541 */
- {INTC, INTC, INTC, INTC}, /* GD31244 */
- {INTD, INTA, INTA, INTA}, /* mini-PCI */
- {INTD, INTC, INTA, INTA}, /* NEC USB */
- };
-
- if (pin < 1 || pin > 4)
- return -1;
-
- return pci_irq_table[slot % 6][pin - 1];
-}
-
-static struct hw_pci em7210_pci __initdata = {
- .nr_controllers = 1,
- .ops = &iop3xx_ops,
- .setup = iop3xx_pci_setup,
- .preinit = iop3xx_pci_preinit,
- .map_irq = em7210_pci_map_irq,
-};
-
-static int __init em7210_pci_init(void)
-{
- if (machine_is_em7210())
- pci_common_init(&em7210_pci);
-
- return 0;
-}
-
-subsys_initcall(em7210_pci_init);
-
-
-/*
- * EM7210 Flash
- */
-static struct physmap_flash_data em7210_flash_data = {
- .width = 2,
-};
-
-static struct resource em7210_flash_resource = {
- .start = 0xf0000000,
- .end = 0xf1ffffff,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device em7210_flash_device = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &em7210_flash_data,
- },
- .num_resources = 1,
- .resource = &em7210_flash_resource,
-};
-
-
-/*
- * EM7210 UART
- * The physical address of the serial port is 0xfe800000,
- * so it can be used for physical and virtual address.
- */
-static struct plat_serial8250_port em7210_serial_port[] = {
- {
- .mapbase = IQ31244_UART,
- .membase = (char *)IQ31244_UART,
- .irq = IRQ_IOP32X_XINT1,
- .flags = UPF_SKIP_TEST,
- .iotype = UPIO_MEM,
- .regshift = 0,
- .uartclk = 1843200,
- },
- { },
-};
-
-static struct resource em7210_uart_resource = {
- .start = IQ31244_UART,
- .end = IQ31244_UART + 7,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device em7210_serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = em7210_serial_port,
- },
- .num_resources = 1,
- .resource = &em7210_uart_resource,
-};
-
-#define EM7210_HARDWARE_POWER 0
-
-void em7210_power_off(void)
-{
- int ret;
-
- ret = gpio_direction_output(EM7210_HARDWARE_POWER, 1);
- if (ret)
- pr_crit("could not drive power off GPIO high\n");
-}
-
-static int __init em7210_request_gpios(void)
-{
- int ret;
-
- if (!machine_is_em7210())
- return 0;
-
- ret = gpio_request(EM7210_HARDWARE_POWER, "power");
- if (ret) {
- pr_err("could not request power off GPIO\n");
- return 0;
- }
-
- pm_power_off = em7210_power_off;
-
- return 0;
-}
-device_initcall(em7210_request_gpios);
-
-static void __init em7210_init_machine(void)
-{
- register_iop32x_gpio();
- platform_device_register(&em7210_serial_device);
- gpiod_add_lookup_table(&iop3xx_i2c0_gpio_lookup);
- gpiod_add_lookup_table(&iop3xx_i2c1_gpio_lookup);
- platform_device_register(&iop3xx_i2c0_device);
- platform_device_register(&iop3xx_i2c1_device);
- platform_device_register(&em7210_flash_device);
- platform_device_register(&iop3xx_dma_0_channel);
- platform_device_register(&iop3xx_dma_1_channel);
-
- i2c_register_board_info(0, em7210_i2c_devices,
- ARRAY_SIZE(em7210_i2c_devices));
-}
-
-MACHINE_START(EM7210, "Lanner EM7210")
- .atag_offset = 0x100,
- .nr_irqs = IOP32X_NR_IRQS,
- .map_io = em7210_map_io,
- .init_irq = iop32x_init_irq,
- .init_time = em7210_timer_init,
- .init_machine = em7210_init_machine,
- .restart = iop3xx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c
deleted file mode 100644
index cd6e7da2ea10..000000000000
--- a/arch/arm/mach-iop32x/glantank.c
+++ /dev/null
@@ -1,214 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-iop32x/glantank.c
- *
- * Board support code for the GLAN Tank.
- *
- * Copyright (C) 2006, 2007 Martin Michlmayr <tbm@cyrius.com>
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/f75375s.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/pm.h>
-#include <linux/string.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/mtd/physmap.h>
-#include <linux/i2c.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/gpio/machine.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/pci.h>
-#include <asm/mach/time.h>
-#include <asm/mach-types.h>
-#include <asm/page.h>
-
-#include "hardware.h"
-#include "gpio-iop32x.h"
-#include "irqs.h"
-
-/*
- * GLAN Tank timer tick configuration.
- */
-static void __init glantank_timer_init(void)
-{
- /* 33.333 MHz crystal. */
- iop_init_time(200000000);
-}
-
-
-/*
- * GLAN Tank I/O.
- */
-static struct map_desc glantank_io_desc[] __initdata = {
- { /* on-board devices */
- .virtual = GLANTANK_UART,
- .pfn = __phys_to_pfn(GLANTANK_UART),
- .length = 0x00100000,
- .type = MT_DEVICE
- },
-};
-
-void __init glantank_map_io(void)
-{
- iop3xx_map_io();
- iotable_init(glantank_io_desc, ARRAY_SIZE(glantank_io_desc));
-}
-
-
-/*
- * GLAN Tank PCI.
- */
-#define INTA IRQ_IOP32X_XINT0
-#define INTB IRQ_IOP32X_XINT1
-#define INTC IRQ_IOP32X_XINT2
-#define INTD IRQ_IOP32X_XINT3
-
-static int __init
-glantank_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- static int pci_irq_table[][4] = {
- /*
- * PCI IDSEL/INTPIN->INTLINE
- * A B C D
- */
- {INTD, INTD, INTD, INTD}, /* UART (8250) */
- {INTA, INTA, INTA, INTA}, /* Ethernet (E1000) */
- {INTB, INTB, INTB, INTB}, /* IDE (AEC6280R) */
- {INTC, INTC, INTC, INTC}, /* USB (NEC) */
- };
-
- BUG_ON(pin < 1 || pin > 4);
-
- return pci_irq_table[slot % 4][pin - 1];
-}
-
-static struct hw_pci glantank_pci __initdata = {
- .nr_controllers = 1,
- .ops = &iop3xx_ops,
- .setup = iop3xx_pci_setup,
- .preinit = iop3xx_pci_preinit,
- .map_irq = glantank_pci_map_irq,
-};
-
-static int __init glantank_pci_init(void)
-{
- if (machine_is_glantank())
- pci_common_init(&glantank_pci);
-
- return 0;
-}
-
-subsys_initcall(glantank_pci_init);
-
-
-/*
- * GLAN Tank machine initialization.
- */
-static struct physmap_flash_data glantank_flash_data = {
- .width = 2,
-};
-
-static struct resource glantank_flash_resource = {
- .start = 0xf0000000,
- .end = 0xf007ffff,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device glantank_flash_device = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &glantank_flash_data,
- },
- .num_resources = 1,
- .resource = &glantank_flash_resource,
-};
-
-static struct plat_serial8250_port glantank_serial_port[] = {
- {
- .mapbase = GLANTANK_UART,
- .membase = (char *)GLANTANK_UART,
- .irq = IRQ_IOP32X_XINT3,
- .flags = UPF_SKIP_TEST,
- .iotype = UPIO_MEM,
- .regshift = 0,
- .uartclk = 1843200,
- },
- { },
-};
-
-static struct resource glantank_uart_resource = {
- .start = GLANTANK_UART,
- .end = GLANTANK_UART + 7,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device glantank_serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = glantank_serial_port,
- },
- .num_resources = 1,
- .resource = &glantank_uart_resource,
-};
-
-static struct f75375s_platform_data glantank_f75375s = {
- .pwm = { 255, 255 },
- .pwm_enable = { 0, 0 },
-};
-
-static struct i2c_board_info __initdata glantank_i2c_devices[] = {
- {
- I2C_BOARD_INFO("rs5c372a", 0x32),
- },
- {
- I2C_BOARD_INFO("f75375", 0x2e),
- .platform_data = &glantank_f75375s,
- },
-};
-
-static void glantank_power_off(void)
-{
- __raw_writeb(0x01, IOMEM(0xfe8d0004));
-
- while (1)
- ;
-}
-
-static void __init glantank_init_machine(void)
-{
- register_iop32x_gpio();
- gpiod_add_lookup_table(&iop3xx_i2c0_gpio_lookup);
- gpiod_add_lookup_table(&iop3xx_i2c1_gpio_lookup);
- platform_device_register(&iop3xx_i2c0_device);
- platform_device_register(&iop3xx_i2c1_device);
- platform_device_register(&glantank_flash_device);
- platform_device_register(&glantank_serial_device);
- platform_device_register(&iop3xx_dma_0_channel);
- platform_device_register(&iop3xx_dma_1_channel);
-
- i2c_register_board_info(0, glantank_i2c_devices,
- ARRAY_SIZE(glantank_i2c_devices));
-
- pm_power_off = glantank_power_off;
-}
-
-MACHINE_START(GLANTANK, "GLAN Tank")
- /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .atag_offset = 0x100,
- .nr_irqs = IOP32X_NR_IRQS,
- .map_io = glantank_map_io,
- .init_irq = iop32x_init_irq,
- .init_time = glantank_timer_init,
- .init_machine = glantank_init_machine,
- .restart = iop3xx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-iop32x/glantank.h b/arch/arm/mach-iop32x/glantank.h
deleted file mode 100644
index f38e86b82c3d..000000000000
--- a/arch/arm/mach-iop32x/glantank.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * IO-Data GLAN Tank board registers
- */
-
-#ifndef __GLANTANK_H
-#define __GLANTANK_H
-
-#define GLANTANK_UART 0xfe800000 /* UART */
-
-
-#endif
diff --git a/arch/arm/mach-iop32x/gpio-iop32x.h b/arch/arm/mach-iop32x/gpio-iop32x.h
deleted file mode 100644
index 20af87e4c5e8..000000000000
--- a/arch/arm/mach-iop32x/gpio-iop32x.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-static struct resource iop32x_gpio_res[] = {
- DEFINE_RES_MEM((IOP3XX_PERIPHERAL_PHYS_BASE + 0x07c4), 0x10),
-};
-
-static inline void register_iop32x_gpio(void)
-{
- platform_device_register_simple("gpio-iop", 0,
- iop32x_gpio_res,
- ARRAY_SIZE(iop32x_gpio_res));
-}
diff --git a/arch/arm/mach-iop32x/hardware.h b/arch/arm/mach-iop32x/hardware.h
deleted file mode 100644
index 43ab4fb8f9b0..000000000000
--- a/arch/arm/mach-iop32x/hardware.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __HARDWARE_H
-#define __HARDWARE_H
-
-#include <asm/types.h>
-
-/*
- * Note about PCI IO space mappings
- *
- * To make IO space accesses efficient, we store virtual addresses in
- * the IO resources.
- *
- * The PCI IO space is located at virtual 0xfe000000 from physical
- * 0x90000000. The PCI BARs must be programmed with physical addresses,
- * but when we read them, we convert them to virtual addresses. See
- * arch/arm/plat-iop/pci.c.
- */
-
-#ifndef __ASSEMBLY__
-void iop32x_init_irq(void);
-#endif
-
-
-/*
- * Generic chipset bits
- */
-#include "iop3xx.h"
-
-/*
- * Board specific bits
- */
-#include "glantank.h"
-#include "iq80321.h"
-#include "iq31244.h"
-#include "n2100.h"
-
-
-#endif
diff --git a/arch/arm/mach-iop32x/i2c.c b/arch/arm/mach-iop32x/i2c.c
deleted file mode 100644
index e422286af469..000000000000
--- a/arch/arm/mach-iop32x/i2c.c
+++ /dev/null
@@ -1,92 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/plat-iop/i2c.c
- *
- * Author: Nicolas Pitre <nico@cam.org>
- * Copyright (C) 2001 MontaVista Software, Inc.
- * Copyright (C) 2004 Intel Corporation.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/major.h>
-#include <linux/fs.h>
-#include <linux/platform_device.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/serial_core.h>
-#include <linux/io.h>
-#include <linux/gpio/machine.h>
-#include <asm/page.h>
-#include <asm/mach/map.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <asm/mach/arch.h>
-
-#include "hardware.h"
-#include "iop3xx.h"
-#include "irqs.h"
-
-/*
- * Each of the I2C busses have corresponding GPIO lines, and the driver
- * need to access these directly to drive the bus low at times.
- */
-
-struct gpiod_lookup_table iop3xx_i2c0_gpio_lookup = {
- .dev_id = "IOP3xx-I2C.0",
- .table = {
- GPIO_LOOKUP("gpio-iop", 7, "scl", GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP("gpio-iop", 6, "sda", GPIO_ACTIVE_HIGH),
- { }
- },
-};
-
-struct gpiod_lookup_table iop3xx_i2c1_gpio_lookup = {
- .dev_id = "IOP3xx-I2C.1",
- .table = {
- GPIO_LOOKUP("gpio-iop", 5, "scl", GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP("gpio-iop", 4, "sda", GPIO_ACTIVE_HIGH),
- { }
- },
-};
-
-static struct resource iop3xx_i2c0_resources[] = {
- [0] = {
- .start = 0xfffff680,
- .end = 0xfffff697,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_IOP32X_I2C_0,
- .end = IRQ_IOP32X_I2C_0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device iop3xx_i2c0_device = {
- .name = "IOP3xx-I2C",
- .id = 0,
- .num_resources = 2,
- .resource = iop3xx_i2c0_resources,
-};
-
-
-static struct resource iop3xx_i2c1_resources[] = {
- [0] = {
- .start = 0xfffff6a0,
- .end = 0xfffff6b7,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_IOP32X_I2C_1,
- .end = IRQ_IOP32X_I2C_1,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-struct platform_device iop3xx_i2c1_device = {
- .name = "IOP3xx-I2C",
- .id = 1,
- .num_resources = 2,
- .resource = iop3xx_i2c1_resources,
-};
diff --git a/arch/arm/mach-iop32x/iop3xx.h b/arch/arm/mach-iop32x/iop3xx.h
deleted file mode 100644
index a6ec7ebadb35..000000000000
--- a/arch/arm/mach-iop32x/iop3xx.h
+++ /dev/null
@@ -1,326 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Intel IOP32X and IOP33X register definitions
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- * Copyright (C) 2004 Intel Corp.
- */
-
-#ifndef __IOP3XX_H
-#define __IOP3XX_H
-
-/*
- * Peripherals that are shared between the iop32x and iop33x but
- * located at different addresses.
- */
-#define IOP3XX_TIMER_REG(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + 0x07e0 + (reg))
-
-#include "iop3xx.h"
-
-/* ATU Parameters
- * set up a 1:1 bus to physical ram relationship
- * w/ physical ram on top of pci in the memory map
- */
-#define IOP32X_MAX_RAM_SIZE 0x40000000UL
-#define IOP3XX_MAX_RAM_SIZE IOP32X_MAX_RAM_SIZE
-#define IOP3XX_PCI_LOWER_MEM_BA 0x80000000
-
-/*
- * IOP3XX GPIO handling
- */
-#define IOP3XX_GPIO_LINE(x) (x)
-
-#ifndef __ASSEMBLY__
-extern int init_atu;
-extern int iop3xx_get_init_atu(void);
-#endif
-
-
-/*
- * IOP3XX processor registers
- */
-#define IOP3XX_PERIPHERAL_PHYS_BASE 0xffffe000
-#define IOP3XX_PERIPHERAL_VIRT_BASE 0xfedfe000
-#define IOP3XX_PERIPHERAL_SIZE 0x00002000
-#define IOP3XX_PERIPHERAL_UPPER_PA (IOP3XX_PERIPHERAL_PHYS_BASE +\
- IOP3XX_PERIPHERAL_SIZE - 1)
-#define IOP3XX_PERIPHERAL_UPPER_VA (IOP3XX_PERIPHERAL_VIRT_BASE +\
- IOP3XX_PERIPHERAL_SIZE - 1)
-#define IOP3XX_PMMR_PHYS_TO_VIRT(addr) (u32) ((u32) (addr) -\
- (IOP3XX_PERIPHERAL_PHYS_BASE\
- - IOP3XX_PERIPHERAL_VIRT_BASE))
-#define IOP3XX_REG_ADDR(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + (reg))
-
-/* Address Translation Unit */
-#define IOP3XX_ATUVID (volatile u16 *)IOP3XX_REG_ADDR(0x0100)
-#define IOP3XX_ATUDID (volatile u16 *)IOP3XX_REG_ADDR(0x0102)
-#define IOP3XX_ATUCMD (volatile u16 *)IOP3XX_REG_ADDR(0x0104)
-#define IOP3XX_ATUSR (volatile u16 *)IOP3XX_REG_ADDR(0x0106)
-#define IOP3XX_ATURID (volatile u8 *)IOP3XX_REG_ADDR(0x0108)
-#define IOP3XX_ATUCCR (volatile u32 *)IOP3XX_REG_ADDR(0x0109)
-#define IOP3XX_ATUCLSR (volatile u8 *)IOP3XX_REG_ADDR(0x010c)
-#define IOP3XX_ATULT (volatile u8 *)IOP3XX_REG_ADDR(0x010d)
-#define IOP3XX_ATUHTR (volatile u8 *)IOP3XX_REG_ADDR(0x010e)
-#define IOP3XX_ATUBIST (volatile u8 *)IOP3XX_REG_ADDR(0x010f)
-#define IOP3XX_IABAR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0110)
-#define IOP3XX_IAUBAR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0114)
-#define IOP3XX_IABAR1 (volatile u32 *)IOP3XX_REG_ADDR(0x0118)
-#define IOP3XX_IAUBAR1 (volatile u32 *)IOP3XX_REG_ADDR(0x011c)
-#define IOP3XX_IABAR2 (volatile u32 *)IOP3XX_REG_ADDR(0x0120)
-#define IOP3XX_IAUBAR2 (volatile u32 *)IOP3XX_REG_ADDR(0x0124)
-#define IOP3XX_ASVIR (volatile u16 *)IOP3XX_REG_ADDR(0x012c)
-#define IOP3XX_ASIR (volatile u16 *)IOP3XX_REG_ADDR(0x012e)
-#define IOP3XX_ERBAR (volatile u32 *)IOP3XX_REG_ADDR(0x0130)
-#define IOP3XX_ATUILR (volatile u8 *)IOP3XX_REG_ADDR(0x013c)
-#define IOP3XX_ATUIPR (volatile u8 *)IOP3XX_REG_ADDR(0x013d)
-#define IOP3XX_ATUMGNT (volatile u8 *)IOP3XX_REG_ADDR(0x013e)
-#define IOP3XX_ATUMLAT (volatile u8 *)IOP3XX_REG_ADDR(0x013f)
-#define IOP3XX_IALR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0140)
-#define IOP3XX_IATVR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0144)
-#define IOP3XX_ERLR (volatile u32 *)IOP3XX_REG_ADDR(0x0148)
-#define IOP3XX_ERTVR (volatile u32 *)IOP3XX_REG_ADDR(0x014c)
-#define IOP3XX_IALR1 (volatile u32 *)IOP3XX_REG_ADDR(0x0150)
-#define IOP3XX_IALR2 (volatile u32 *)IOP3XX_REG_ADDR(0x0154)
-#define IOP3XX_IATVR2 (volatile u32 *)IOP3XX_REG_ADDR(0x0158)
-#define IOP3XX_OIOWTVR (volatile u32 *)IOP3XX_REG_ADDR(0x015c)
-#define IOP3XX_OMWTVR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0160)
-#define IOP3XX_OUMWTVR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0164)
-#define IOP3XX_OMWTVR1 (volatile u32 *)IOP3XX_REG_ADDR(0x0168)
-#define IOP3XX_OUMWTVR1 (volatile u32 *)IOP3XX_REG_ADDR(0x016c)
-#define IOP3XX_OUDWTVR (volatile u32 *)IOP3XX_REG_ADDR(0x0178)
-#define IOP3XX_ATUCR (volatile u32 *)IOP3XX_REG_ADDR(0x0180)
-#define IOP3XX_PCSR (volatile u32 *)IOP3XX_REG_ADDR(0x0184)
-#define IOP3XX_ATUISR (volatile u32 *)IOP3XX_REG_ADDR(0x0188)
-#define IOP3XX_ATUIMR (volatile u32 *)IOP3XX_REG_ADDR(0x018c)
-#define IOP3XX_IABAR3 (volatile u32 *)IOP3XX_REG_ADDR(0x0190)
-#define IOP3XX_IAUBAR3 (volatile u32 *)IOP3XX_REG_ADDR(0x0194)
-#define IOP3XX_IALR3 (volatile u32 *)IOP3XX_REG_ADDR(0x0198)
-#define IOP3XX_IATVR3 (volatile u32 *)IOP3XX_REG_ADDR(0x019c)
-#define IOP3XX_OCCAR (volatile u32 *)IOP3XX_REG_ADDR(0x01a4)
-#define IOP3XX_OCCDR (volatile u32 *)IOP3XX_REG_ADDR(0x01ac)
-#define IOP3XX_PDSCR (volatile u32 *)IOP3XX_REG_ADDR(0x01bc)
-#define IOP3XX_PMCAPID (volatile u8 *)IOP3XX_REG_ADDR(0x01c0)
-#define IOP3XX_PMNEXT (volatile u8 *)IOP3XX_REG_ADDR(0x01c1)
-#define IOP3XX_APMCR (volatile u16 *)IOP3XX_REG_ADDR(0x01c2)
-#define IOP3XX_APMCSR (volatile u16 *)IOP3XX_REG_ADDR(0x01c4)
-#define IOP3XX_PCIXCAPID (volatile u8 *)IOP3XX_REG_ADDR(0x01e0)
-#define IOP3XX_PCIXNEXT (volatile u8 *)IOP3XX_REG_ADDR(0x01e1)
-#define IOP3XX_PCIXCMD (volatile u16 *)IOP3XX_REG_ADDR(0x01e2)
-#define IOP3XX_PCIXSR (volatile u32 *)IOP3XX_REG_ADDR(0x01e4)
-#define IOP3XX_PCIIRSR (volatile u32 *)IOP3XX_REG_ADDR(0x01ec)
-#define IOP3XX_PCSR_OUT_Q_BUSY (1 << 15)
-#define IOP3XX_PCSR_IN_Q_BUSY (1 << 14)
-#define IOP3XX_ATUCR_OUT_EN (1 << 1)
-
-#define IOP3XX_INIT_ATU_DEFAULT 0
-#define IOP3XX_INIT_ATU_DISABLE -1
-#define IOP3XX_INIT_ATU_ENABLE 1
-
-/* Messaging Unit */
-#define IOP3XX_IMR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0310)
-#define IOP3XX_IMR1 (volatile u32 *)IOP3XX_REG_ADDR(0x0314)
-#define IOP3XX_OMR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0318)
-#define IOP3XX_OMR1 (volatile u32 *)IOP3XX_REG_ADDR(0x031c)
-#define IOP3XX_IDR (volatile u32 *)IOP3XX_REG_ADDR(0x0320)
-#define IOP3XX_IISR (volatile u32 *)IOP3XX_REG_ADDR(0x0324)
-#define IOP3XX_IIMR (volatile u32 *)IOP3XX_REG_ADDR(0x0328)
-#define IOP3XX_ODR (volatile u32 *)IOP3XX_REG_ADDR(0x032c)
-#define IOP3XX_OISR (volatile u32 *)IOP3XX_REG_ADDR(0x0330)
-#define IOP3XX_OIMR (volatile u32 *)IOP3XX_REG_ADDR(0x0334)
-#define IOP3XX_MUCR (volatile u32 *)IOP3XX_REG_ADDR(0x0350)
-#define IOP3XX_QBAR (volatile u32 *)IOP3XX_REG_ADDR(0x0354)
-#define IOP3XX_IFHPR (volatile u32 *)IOP3XX_REG_ADDR(0x0360)
-#define IOP3XX_IFTPR (volatile u32 *)IOP3XX_REG_ADDR(0x0364)
-#define IOP3XX_IPHPR (volatile u32 *)IOP3XX_REG_ADDR(0x0368)
-#define IOP3XX_IPTPR (volatile u32 *)IOP3XX_REG_ADDR(0x036c)
-#define IOP3XX_OFHPR (volatile u32 *)IOP3XX_REG_ADDR(0x0370)
-#define IOP3XX_OFTPR (volatile u32 *)IOP3XX_REG_ADDR(0x0374)
-#define IOP3XX_OPHPR (volatile u32 *)IOP3XX_REG_ADDR(0x0378)
-#define IOP3XX_OPTPR (volatile u32 *)IOP3XX_REG_ADDR(0x037c)
-#define IOP3XX_IAR (volatile u32 *)IOP3XX_REG_ADDR(0x0380)
-
-/* DMA Controller */
-#define IOP3XX_DMA_PHYS_BASE(chan) (IOP3XX_PERIPHERAL_PHYS_BASE + \
- (0x400 + (chan << 6)))
-#define IOP3XX_DMA_UPPER_PA(chan) (IOP3XX_DMA_PHYS_BASE(chan) + 0x27)
-
-/* Peripheral bus interface */
-#define IOP3XX_PBCR (volatile u32 *)IOP3XX_REG_ADDR(0x0680)
-#define IOP3XX_PBISR (volatile u32 *)IOP3XX_REG_ADDR(0x0684)
-#define IOP3XX_PBBAR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0688)
-#define IOP3XX_PBLR0 (volatile u32 *)IOP3XX_REG_ADDR(0x068c)
-#define IOP3XX_PBBAR1 (volatile u32 *)IOP3XX_REG_ADDR(0x0690)
-#define IOP3XX_PBLR1 (volatile u32 *)IOP3XX_REG_ADDR(0x0694)
-#define IOP3XX_PBBAR2 (volatile u32 *)IOP3XX_REG_ADDR(0x0698)
-#define IOP3XX_PBLR2 (volatile u32 *)IOP3XX_REG_ADDR(0x069c)
-#define IOP3XX_PBBAR3 (volatile u32 *)IOP3XX_REG_ADDR(0x06a0)
-#define IOP3XX_PBLR3 (volatile u32 *)IOP3XX_REG_ADDR(0x06a4)
-#define IOP3XX_PBBAR4 (volatile u32 *)IOP3XX_REG_ADDR(0x06a8)
-#define IOP3XX_PBLR4 (volatile u32 *)IOP3XX_REG_ADDR(0x06ac)
-#define IOP3XX_PBBAR5 (volatile u32 *)IOP3XX_REG_ADDR(0x06b0)
-#define IOP3XX_PBLR5 (volatile u32 *)IOP3XX_REG_ADDR(0x06b4)
-#define IOP3XX_PMBR0 (volatile u32 *)IOP3XX_REG_ADDR(0x06c0)
-#define IOP3XX_PMBR1 (volatile u32 *)IOP3XX_REG_ADDR(0x06e0)
-#define IOP3XX_PMBR2 (volatile u32 *)IOP3XX_REG_ADDR(0x06e4)
-
-/* Peripheral performance monitoring unit */
-#define IOP3XX_GTMR (volatile u32 *)IOP3XX_REG_ADDR(0x0700)
-#define IOP3XX_ESR (volatile u32 *)IOP3XX_REG_ADDR(0x0704)
-#define IOP3XX_EMISR (volatile u32 *)IOP3XX_REG_ADDR(0x0708)
-#define IOP3XX_GTSR (volatile u32 *)IOP3XX_REG_ADDR(0x0710)
-/* PERCR0 DOESN'T EXIST - index from 1! */
-#define IOP3XX_PERCR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0710)
-
-/* Timers */
-#define IOP3XX_TU_TMR0 (volatile u32 *)IOP3XX_TIMER_REG(0x0000)
-#define IOP3XX_TU_TMR1 (volatile u32 *)IOP3XX_TIMER_REG(0x0004)
-#define IOP3XX_TU_TCR0 (volatile u32 *)IOP3XX_TIMER_REG(0x0008)
-#define IOP3XX_TU_TCR1 (volatile u32 *)IOP3XX_TIMER_REG(0x000c)
-#define IOP3XX_TU_TRR0 (volatile u32 *)IOP3XX_TIMER_REG(0x0010)
-#define IOP3XX_TU_TRR1 (volatile u32 *)IOP3XX_TIMER_REG(0x0014)
-#define IOP3XX_TU_TISR (volatile u32 *)IOP3XX_TIMER_REG(0x0018)
-#define IOP3XX_TU_WDTCR (volatile u32 *)IOP3XX_TIMER_REG(0x001c)
-#define IOP_TMR_EN 0x02
-#define IOP_TMR_RELOAD 0x04
-#define IOP_TMR_PRIVILEGED 0x08
-#define IOP_TMR_RATIO_1_1 0x00
-
-/* Watchdog timer definitions */
-#define IOP_WDTCR_EN_ARM 0x1e1e1e1e
-#define IOP_WDTCR_EN 0xe1e1e1e1
-/* iop3xx does not support stopping the watchdog, so we just re-arm */
-#define IOP_WDTCR_DIS_ARM (IOP_WDTCR_EN_ARM)
-#define IOP_WDTCR_DIS (IOP_WDTCR_EN)
-
-/* Application accelerator unit */
-#define IOP3XX_AAU_PHYS_BASE (IOP3XX_PERIPHERAL_PHYS_BASE + 0x800)
-#define IOP3XX_AAU_UPPER_PA (IOP3XX_AAU_PHYS_BASE + 0xa7)
-
-/* I2C bus interface unit */
-#define IOP3XX_ICR0 (volatile u32 *)IOP3XX_REG_ADDR(0x1680)
-#define IOP3XX_ISR0 (volatile u32 *)IOP3XX_REG_ADDR(0x1684)
-#define IOP3XX_ISAR0 (volatile u32 *)IOP3XX_REG_ADDR(0x1688)
-#define IOP3XX_IDBR0 (volatile u32 *)IOP3XX_REG_ADDR(0x168c)
-#define IOP3XX_IBMR0 (volatile u32 *)IOP3XX_REG_ADDR(0x1694)
-#define IOP3XX_ICR1 (volatile u32 *)IOP3XX_REG_ADDR(0x16a0)
-#define IOP3XX_ISR1 (volatile u32 *)IOP3XX_REG_ADDR(0x16a4)
-#define IOP3XX_ISAR1 (volatile u32 *)IOP3XX_REG_ADDR(0x16a8)
-#define IOP3XX_IDBR1 (volatile u32 *)IOP3XX_REG_ADDR(0x16ac)
-#define IOP3XX_IBMR1 (volatile u32 *)IOP3XX_REG_ADDR(0x16b4)
-
-
-/*
- * IOP3XX I/O and Mem space regions for PCI autoconfiguration
- */
-#define IOP3XX_PCI_LOWER_MEM_PA 0x80000000
-#define IOP3XX_PCI_MEM_WINDOW_SIZE 0x08000000
-
-#define IOP3XX_PCI_LOWER_IO_PA 0x90000000
-#define IOP3XX_PCI_LOWER_IO_BA 0x00000000
-
-#ifndef __ASSEMBLY__
-
-#include <linux/types.h>
-#include <linux/reboot.h>
-
-void iop3xx_map_io(void);
-void iop_enable_cp6(void);
-void iop_init_cp6_handler(void);
-void iop_init_time(unsigned long tickrate);
-void iop3xx_restart(enum reboot_mode, const char *);
-
-static inline u32 read_tmr0(void)
-{
- u32 val;
- asm volatile("mrc p6, 0, %0, c0, c1, 0" : "=r" (val));
- return val;
-}
-
-static inline void write_tmr0(u32 val)
-{
- asm volatile("mcr p6, 0, %0, c0, c1, 0" : : "r" (val));
-}
-
-static inline void write_tmr1(u32 val)
-{
- asm volatile("mcr p6, 0, %0, c1, c1, 0" : : "r" (val));
-}
-
-static inline u32 read_tcr0(void)
-{
- u32 val;
- asm volatile("mrc p6, 0, %0, c2, c1, 0" : "=r" (val));
- return val;
-}
-
-static inline void write_tcr0(u32 val)
-{
- asm volatile("mcr p6, 0, %0, c2, c1, 0" : : "r" (val));
-}
-
-static inline u32 read_tcr1(void)
-{
- u32 val;
- asm volatile("mrc p6, 0, %0, c3, c1, 0" : "=r" (val));
- return val;
-}
-
-static inline void write_tcr1(u32 val)
-{
- asm volatile("mcr p6, 0, %0, c3, c1, 0" : : "r" (val));
-}
-
-static inline void write_trr0(u32 val)
-{
- asm volatile("mcr p6, 0, %0, c4, c1, 0" : : "r" (val));
-}
-
-static inline void write_trr1(u32 val)
-{
- asm volatile("mcr p6, 0, %0, c5, c1, 0" : : "r" (val));
-}
-
-static inline void write_tisr(u32 val)
-{
- asm volatile("mcr p6, 0, %0, c6, c1, 0" : : "r" (val));
-}
-
-static inline u32 read_wdtcr(void)
-{
- u32 val;
- asm volatile("mrc p6, 0, %0, c7, c1, 0":"=r" (val));
- return val;
-}
-static inline void write_wdtcr(u32 val)
-{
- asm volatile("mcr p6, 0, %0, c7, c1, 0"::"r" (val));
-}
-
-extern unsigned long get_iop_tick_rate(void);
-
-/* only iop13xx has these registers, we define these to present a
- * common register interface for the iop_wdt driver.
- */
-#define IOP_RCSR_WDT (0)
-static inline u32 read_rcsr(void)
-{
- return 0;
-}
-static inline void write_wdtsr(u32 val)
-{
- do { } while (0);
-}
-
-extern struct platform_device iop3xx_dma_0_channel;
-extern struct platform_device iop3xx_dma_1_channel;
-extern struct platform_device iop3xx_aau_channel;
-extern struct platform_device iop3xx_i2c0_device;
-extern struct platform_device iop3xx_i2c1_device;
-extern struct gpiod_lookup_table iop3xx_i2c0_gpio_lookup;
-extern struct gpiod_lookup_table iop3xx_i2c1_gpio_lookup;
-
-#endif
-
-
-#endif
diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c
deleted file mode 100644
index 8b4c29d17265..000000000000
--- a/arch/arm/mach-iop32x/iq31244.c
+++ /dev/null
@@ -1,333 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-iop32x/iq31244.c
- *
- * Board support code for the Intel EP80219 and IQ31244 platforms.
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- * Copyright 2003 (c) MontaVista, Software, Inc.
- * Copyright (C) 2004 Intel Corp.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/pm.h>
-#include <linux/string.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/gpio/machine.h>
-#include <asm/cputype.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/pci.h>
-#include <asm/mach/time.h>
-#include <asm/mach-types.h>
-#include <asm/page.h>
-
-#include "hardware.h"
-#include "irqs.h"
-#include "gpio-iop32x.h"
-
-/*
- * Until March of 2007 iq31244 platforms and ep80219 platforms shared the
- * same machine id, and the processor type was used to select board type.
- * However this assumption breaks for an iq80219 board which is an iop219
- * processor on an iq31244 board. The force_ep80219 flag has been added
- * for old boot loaders using the iq31244 machine id for an ep80219 platform.
- */
-static int force_ep80219;
-
-static int is_80219(void)
-{
- return !!((read_cpuid_id() & 0xffffffe0) == 0x69052e20);
-}
-
-static int is_ep80219(void)
-{
- if (machine_is_ep80219() || force_ep80219)
- return 1;
- else
- return 0;
-}
-
-
-/*
- * EP80219/IQ31244 timer tick configuration.
- */
-static void __init iq31244_timer_init(void)
-{
- if (is_ep80219()) {
- /* 33.333 MHz crystal. */
- iop_init_time(200000000);
- } else {
- /* 33.000 MHz crystal. */
- iop_init_time(198000000);
- }
-}
-
-
-/*
- * IQ31244 I/O.
- */
-static struct map_desc iq31244_io_desc[] __initdata = {
- { /* on-board devices */
- .virtual = IQ31244_UART,
- .pfn = __phys_to_pfn(IQ31244_UART),
- .length = 0x00100000,
- .type = MT_DEVICE,
- },
-};
-
-void __init iq31244_map_io(void)
-{
- iop3xx_map_io();
- iotable_init(iq31244_io_desc, ARRAY_SIZE(iq31244_io_desc));
-}
-
-
-/*
- * EP80219/IQ31244 PCI.
- */
-static int __init
-ep80219_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- int irq;
-
- if (slot == 0) {
- /* CFlash */
- irq = IRQ_IOP32X_XINT1;
- } else if (slot == 1) {
- /* 82551 Pro 100 */
- irq = IRQ_IOP32X_XINT0;
- } else if (slot == 2) {
- /* PCI-X Slot */
- irq = IRQ_IOP32X_XINT3;
- } else if (slot == 3) {
- /* SATA */
- irq = IRQ_IOP32X_XINT2;
- } else {
- printk(KERN_ERR "ep80219_pci_map_irq() called for unknown "
- "device PCI:%d:%d:%d\n", dev->bus->number,
- PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
- irq = -1;
- }
-
- return irq;
-}
-
-static struct hw_pci ep80219_pci __initdata = {
- .nr_controllers = 1,
- .ops = &iop3xx_ops,
- .setup = iop3xx_pci_setup,
- .preinit = iop3xx_pci_preinit,
- .map_irq = ep80219_pci_map_irq,
-};
-
-static int __init
-iq31244_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- int irq;
-
- if (slot == 0) {
- /* CFlash */
- irq = IRQ_IOP32X_XINT1;
- } else if (slot == 1) {
- /* SATA */
- irq = IRQ_IOP32X_XINT2;
- } else if (slot == 2) {
- /* PCI-X Slot */
- irq = IRQ_IOP32X_XINT3;
- } else if (slot == 3) {
- /* 82546 GigE */
- irq = IRQ_IOP32X_XINT0;
- } else {
- printk(KERN_ERR "iq31244_pci_map_irq called for unknown "
- "device PCI:%d:%d:%d\n", dev->bus->number,
- PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
- irq = -1;
- }
-
- return irq;
-}
-
-static struct hw_pci iq31244_pci __initdata = {
- .nr_controllers = 1,
- .ops = &iop3xx_ops,
- .setup = iop3xx_pci_setup,
- .preinit = iop3xx_pci_preinit,
- .map_irq = iq31244_pci_map_irq,
-};
-
-static int __init iq31244_pci_init(void)
-{
- if (is_ep80219())
- pci_common_init(&ep80219_pci);
- else if (machine_is_iq31244()) {
- if (is_80219()) {
- printk("note: iq31244 board type has been selected\n");
- printk("note: to select ep80219 operation:\n");
- printk("\t1/ specify \"force_ep80219\" on the kernel"
- " command line\n");
- printk("\t2/ update boot loader to pass"
- " the ep80219 id: %d\n", MACH_TYPE_EP80219);
- }
- pci_common_init(&iq31244_pci);
- }
-
- return 0;
-}
-
-subsys_initcall(iq31244_pci_init);
-
-
-/*
- * IQ31244 machine initialisation.
- */
-static struct physmap_flash_data iq31244_flash_data = {
- .width = 2,
-};
-
-static struct resource iq31244_flash_resource = {
- .start = 0xf0000000,
- .end = 0xf07fffff,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device iq31244_flash_device = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &iq31244_flash_data,
- },
- .num_resources = 1,
- .resource = &iq31244_flash_resource,
-};
-
-static struct plat_serial8250_port iq31244_serial_port[] = {
- {
- .mapbase = IQ31244_UART,
- .membase = (char *)IQ31244_UART,
- .irq = IRQ_IOP32X_XINT1,
- .flags = UPF_SKIP_TEST,
- .iotype = UPIO_MEM,
- .regshift = 0,
- .uartclk = 1843200,
- },
- { },
-};
-
-static struct resource iq31244_uart_resource = {
- .start = IQ31244_UART,
- .end = IQ31244_UART + 7,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device iq31244_serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = iq31244_serial_port,
- },
- .num_resources = 1,
- .resource = &iq31244_uart_resource,
-};
-
-/*
- * This function will send a SHUTDOWN_COMPLETE message to the PIC
- * controller over I2C. We are not using the i2c subsystem since
- * we are going to power off and it may be removed
- */
-void ep80219_power_off(void)
-{
- /*
- * Send the Address byte w/ the start condition
- */
- *IOP3XX_IDBR1 = 0x60;
- *IOP3XX_ICR1 = 0xE9;
- mdelay(1);
-
- /*
- * Send the START_MSG byte w/ no start or stop condition
- */
- *IOP3XX_IDBR1 = 0x0F;
- *IOP3XX_ICR1 = 0xE8;
- mdelay(1);
-
- /*
- * Send the SHUTDOWN_COMPLETE Message ID byte w/ no start or
- * stop condition
- */
- *IOP3XX_IDBR1 = 0x03;
- *IOP3XX_ICR1 = 0xE8;
- mdelay(1);
-
- /*
- * Send an ignored byte w/ stop condition
- */
- *IOP3XX_IDBR1 = 0x00;
- *IOP3XX_ICR1 = 0xEA;
-
- while (1)
- ;
-}
-
-static void __init iq31244_init_machine(void)
-{
- register_iop32x_gpio();
- gpiod_add_lookup_table(&iop3xx_i2c0_gpio_lookup);
- gpiod_add_lookup_table(&iop3xx_i2c1_gpio_lookup);
- platform_device_register(&iop3xx_i2c0_device);
- platform_device_register(&iop3xx_i2c1_device);
- platform_device_register(&iq31244_flash_device);
- platform_device_register(&iq31244_serial_device);
- platform_device_register(&iop3xx_dma_0_channel);
- platform_device_register(&iop3xx_dma_1_channel);
-
- if (is_ep80219())
- pm_power_off = ep80219_power_off;
-
- if (!is_80219())
- platform_device_register(&iop3xx_aau_channel);
-}
-
-static int __init force_ep80219_setup(char *str)
-{
- force_ep80219 = 1;
- return 1;
-}
-
-__setup("force_ep80219", force_ep80219_setup);
-
-MACHINE_START(IQ31244, "Intel IQ31244")
- /* Maintainer: Intel Corp. */
- .atag_offset = 0x100,
- .map_io = iq31244_map_io,
- .init_irq = iop32x_init_irq,
- .init_time = iq31244_timer_init,
- .init_machine = iq31244_init_machine,
- .restart = iop3xx_restart,
-MACHINE_END
-
-/* There should have been an ep80219 machine identifier from the beginning.
- * Boot roms older than March 2007 do not know the ep80219 machine id. Pass
- * "force_ep80219" on the kernel command line, otherwise iq31244 operation
- * will be selected.
- */
-MACHINE_START(EP80219, "Intel EP80219")
- /* Maintainer: Intel Corp. */
- .atag_offset = 0x100,
- .nr_irqs = IOP32X_NR_IRQS,
- .map_io = iq31244_map_io,
- .init_irq = iop32x_init_irq,
- .init_time = iq31244_timer_init,
- .init_machine = iq31244_init_machine,
- .restart = iop3xx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-iop32x/iq31244.h b/arch/arm/mach-iop32x/iq31244.h
deleted file mode 100644
index a7ac691e48d3..000000000000
--- a/arch/arm/mach-iop32x/iq31244.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Intel IQ31244 evaluation board registers
- */
-
-#ifndef __IQ31244_H
-#define __IQ31244_H
-
-#define IQ31244_UART 0xfe800000 /* UART #1 */
-#define IQ31244_7SEG_1 0xfe840000 /* 7-Segment MSB */
-#define IQ31244_7SEG_0 0xfe850000 /* 7-Segment LSB (WO) */
-#define IQ31244_ROTARY_SW 0xfe8d0000 /* Rotary Switch */
-#define IQ31244_BATT_STAT 0xfe8f0000 /* Battery Status */
-
-
-#endif
diff --git a/arch/arm/mach-iop32x/iq80321.c b/arch/arm/mach-iop32x/iq80321.c
deleted file mode 100644
index d9780c4660cb..000000000000
--- a/arch/arm/mach-iop32x/iq80321.c
+++ /dev/null
@@ -1,192 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-iop32x/iq80321.c
- *
- * Board support code for the Intel IQ80321 platform.
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- * Copyright (C) 2004 Intel Corp.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/string.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/gpio/machine.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/pci.h>
-#include <asm/mach/time.h>
-#include <asm/mach-types.h>
-#include <asm/page.h>
-
-#include "hardware.h"
-#include "irqs.h"
-#include "gpio-iop32x.h"
-
-/*
- * IQ80321 timer tick configuration.
- */
-static void __init iq80321_timer_init(void)
-{
- /* 33.333 MHz crystal. */
- iop_init_time(200000000);
-}
-
-
-/*
- * IQ80321 I/O.
- */
-static struct map_desc iq80321_io_desc[] __initdata = {
- { /* on-board devices */
- .virtual = IQ80321_UART,
- .pfn = __phys_to_pfn(IQ80321_UART),
- .length = 0x00100000,
- .type = MT_DEVICE,
- },
-};
-
-void __init iq80321_map_io(void)
-{
- iop3xx_map_io();
- iotable_init(iq80321_io_desc, ARRAY_SIZE(iq80321_io_desc));
-}
-
-
-/*
- * IQ80321 PCI.
- */
-static int __init
-iq80321_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- int irq;
-
- if ((slot == 2 || slot == 6) && pin == 1) {
- /* PCI-X Slot INTA */
- irq = IRQ_IOP32X_XINT2;
- } else if ((slot == 2 || slot == 6) && pin == 2) {
- /* PCI-X Slot INTA */
- irq = IRQ_IOP32X_XINT3;
- } else if ((slot == 2 || slot == 6) && pin == 3) {
- /* PCI-X Slot INTA */
- irq = IRQ_IOP32X_XINT0;
- } else if ((slot == 2 || slot == 6) && pin == 4) {
- /* PCI-X Slot INTA */
- irq = IRQ_IOP32X_XINT1;
- } else if (slot == 4 || slot == 8) {
- /* Gig-E */
- irq = IRQ_IOP32X_XINT0;
- } else {
- printk(KERN_ERR "iq80321_pci_map_irq() called for unknown "
- "device PCI:%d:%d:%d\n", dev->bus->number,
- PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
- irq = -1;
- }
-
- return irq;
-}
-
-static struct hw_pci iq80321_pci __initdata = {
- .nr_controllers = 1,
- .ops = &iop3xx_ops,
- .setup = iop3xx_pci_setup,
- .preinit = iop3xx_pci_preinit_cond,
- .map_irq = iq80321_pci_map_irq,
-};
-
-static int __init iq80321_pci_init(void)
-{
- if ((iop3xx_get_init_atu() == IOP3XX_INIT_ATU_ENABLE) &&
- machine_is_iq80321())
- pci_common_init(&iq80321_pci);
-
- return 0;
-}
-
-subsys_initcall(iq80321_pci_init);
-
-
-/*
- * IQ80321 machine initialisation.
- */
-static struct physmap_flash_data iq80321_flash_data = {
- .width = 1,
-};
-
-static struct resource iq80321_flash_resource = {
- .start = 0xf0000000,
- .end = 0xf07fffff,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device iq80321_flash_device = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &iq80321_flash_data,
- },
- .num_resources = 1,
- .resource = &iq80321_flash_resource,
-};
-
-static struct plat_serial8250_port iq80321_serial_port[] = {
- {
- .mapbase = IQ80321_UART,
- .membase = (char *)IQ80321_UART,
- .irq = IRQ_IOP32X_XINT1,
- .flags = UPF_SKIP_TEST,
- .iotype = UPIO_MEM,
- .regshift = 0,
- .uartclk = 1843200,
- },
- { },
-};
-
-static struct resource iq80321_uart_resource = {
- .start = IQ80321_UART,
- .end = IQ80321_UART + 7,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device iq80321_serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = iq80321_serial_port,
- },
- .num_resources = 1,
- .resource = &iq80321_uart_resource,
-};
-
-static void __init iq80321_init_machine(void)
-{
- register_iop32x_gpio();
- gpiod_add_lookup_table(&iop3xx_i2c0_gpio_lookup);
- gpiod_add_lookup_table(&iop3xx_i2c1_gpio_lookup);
- platform_device_register(&iop3xx_i2c0_device);
- platform_device_register(&iop3xx_i2c1_device);
- platform_device_register(&iq80321_flash_device);
- platform_device_register(&iq80321_serial_device);
- platform_device_register(&iop3xx_dma_0_channel);
- platform_device_register(&iop3xx_dma_1_channel);
- platform_device_register(&iop3xx_aau_channel);
-}
-
-MACHINE_START(IQ80321, "Intel IQ80321")
- /* Maintainer: Intel Corp. */
- .atag_offset = 0x100,
- .nr_irqs = IOP32X_NR_IRQS,
- .map_io = iq80321_map_io,
- .init_irq = iop32x_init_irq,
- .init_time = iq80321_timer_init,
- .init_machine = iq80321_init_machine,
- .restart = iop3xx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-iop32x/iq80321.h b/arch/arm/mach-iop32x/iq80321.h
deleted file mode 100644
index 3a5d10626ea6..000000000000
--- a/arch/arm/mach-iop32x/iq80321.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Intel IQ80321 evaluation board registers
- */
-
-#ifndef __IQ80321_H
-#define __IQ80321_H
-
-#define IQ80321_UART 0xfe800000 /* UART #1 */
-#define IQ80321_7SEG_1 0xfe840000 /* 7-Segment MSB */
-#define IQ80321_7SEG_0 0xfe850000 /* 7-Segment LSB (WO) */
-#define IQ80321_ROTARY_SW 0xfe8d0000 /* Rotary Switch */
-#define IQ80321_BATT_STAT 0xfe8f0000 /* Battery Status */
-
-
-#endif
diff --git a/arch/arm/mach-iop32x/irq.c b/arch/arm/mach-iop32x/irq.c
deleted file mode 100644
index 6dca7e97d81f..000000000000
--- a/arch/arm/mach-iop32x/irq.c
+++ /dev/null
@@ -1,95 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-iop32x/irq.c
- *
- * Generic IOP32X IRQ handling functionality
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <asm/mach/irq.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include "hardware.h"
-
-static u32 iop32x_mask;
-
-static void intctl_write(u32 val)
-{
- asm volatile("mcr p6, 0, %0, c0, c0, 0" : : "r" (val));
-}
-
-static void intstr_write(u32 val)
-{
- asm volatile("mcr p6, 0, %0, c4, c0, 0" : : "r" (val));
-}
-
-static u32 iintsrc_read(void)
-{
- int irq;
-
- asm volatile("mrc p6, 0, %0, c8, c0, 0" : "=r" (irq));
-
- return irq;
-}
-
-static void
-iop32x_irq_mask(struct irq_data *d)
-{
- iop32x_mask &= ~(1 << (d->irq - 1));
- intctl_write(iop32x_mask);
-}
-
-static void
-iop32x_irq_unmask(struct irq_data *d)
-{
- iop32x_mask |= 1 << (d->irq - 1);
- intctl_write(iop32x_mask);
-}
-
-struct irq_chip ext_chip = {
- .name = "IOP32x",
- .irq_ack = iop32x_irq_mask,
- .irq_mask = iop32x_irq_mask,
- .irq_unmask = iop32x_irq_unmask,
-};
-
-static void iop_handle_irq(struct pt_regs *regs)
-{
- u32 mask;
-
- iop_enable_cp6();
-
- do {
- mask = iintsrc_read();
- if (mask)
- generic_handle_irq(fls(mask));
- } while (mask);
-}
-
-void __init iop32x_init_irq(void)
-{
- int i;
-
- iop_init_cp6_handler();
- set_handle_irq(iop_handle_irq);
-
- intctl_write(0);
- intstr_write(0);
- if (machine_is_glantank() ||
- machine_is_iq80321() ||
- machine_is_iq31244() ||
- machine_is_n2100() ||
- machine_is_em7210())
- *IOP3XX_PCIIRSR = 0x0f;
-
- for (i = 1; i < NR_IRQS; i++) {
- irq_set_chip_and_handler(i, &ext_chip, handle_level_irq);
- irq_clear_status_flags(i, IRQ_NOREQUEST | IRQ_NOPROBE);
- }
-}
diff --git a/arch/arm/mach-iop32x/irqs.h b/arch/arm/mach-iop32x/irqs.h
deleted file mode 100644
index e9fc88e09189..000000000000
--- a/arch/arm/mach-iop32x/irqs.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright: (C) 2002 Rory Bolt
- */
-
-#ifndef __IOP32X_IRQS_H
-#define __IOP32X_IRQS_H
-
-/* Interrupts in Linux start at 1, hardware starts at 0 */
-
-#define IOP_IRQ(x) ((x) + 1)
-
-/*
- * IOP80321 chipset interrupts
- */
-#define IRQ_IOP32X_DMA0_EOT IOP_IRQ(0)
-#define IRQ_IOP32X_DMA0_EOC IOP_IRQ(1)
-#define IRQ_IOP32X_DMA1_EOT IOP_IRQ(2)
-#define IRQ_IOP32X_DMA1_EOC IOP_IRQ(3)
-#define IRQ_IOP32X_AA_EOT IOP_IRQ(6)
-#define IRQ_IOP32X_AA_EOC IOP_IRQ(7)
-#define IRQ_IOP32X_CORE_PMON IOP_IRQ(8)
-#define IRQ_IOP32X_TIMER0 IOP_IRQ(9)
-#define IRQ_IOP32X_TIMER1 IOP_IRQ(10)
-#define IRQ_IOP32X_I2C_0 IOP_IRQ(11)
-#define IRQ_IOP32X_I2C_1 IOP_IRQ(12)
-#define IRQ_IOP32X_MESSAGING IOP_IRQ(13)
-#define IRQ_IOP32X_ATU_BIST IOP_IRQ(14)
-#define IRQ_IOP32X_PERFMON IOP_IRQ(15)
-#define IRQ_IOP32X_CORE_PMU IOP_IRQ(16)
-#define IRQ_IOP32X_BIU_ERR IOP_IRQ(17)
-#define IRQ_IOP32X_ATU_ERR IOP_IRQ(18)
-#define IRQ_IOP32X_MCU_ERR IOP_IRQ(19)
-#define IRQ_IOP32X_DMA0_ERR IOP_IRQ(20)
-#define IRQ_IOP32X_DMA1_ERR IOP_IRQ(21)
-#define IRQ_IOP32X_AA_ERR IOP_IRQ(23)
-#define IRQ_IOP32X_MSG_ERR IOP_IRQ(24)
-#define IRQ_IOP32X_SSP IOP_IRQ(25)
-#define IRQ_IOP32X_XINT0 IOP_IRQ(27)
-#define IRQ_IOP32X_XINT1 IOP_IRQ(28)
-#define IRQ_IOP32X_XINT2 IOP_IRQ(29)
-#define IRQ_IOP32X_XINT3 IOP_IRQ(30)
-#define IRQ_IOP32X_HPI IOP_IRQ(31)
-
-#define IOP32X_NR_IRQS (IRQ_IOP32X_HPI + 1)
-
-#endif
diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c
deleted file mode 100644
index bb1e2e11bf35..000000000000
--- a/arch/arm/mach-iop32x/n2100.c
+++ /dev/null
@@ -1,367 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-iop32x/n2100.c
- *
- * Board support code for the Thecus N2100 platform.
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- * Copyright 2003 (c) MontaVista, Software, Inc.
- * Copyright (C) 2004 Intel Corp.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/f75375s.h>
-#include <linux/leds-pca9532.h>
-#include <linux/delay.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/pm.h>
-#include <linux/string.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/mtd/physmap.h>
-#include <linux/i2c.h>
-#include <linux/platform_device.h>
-#include <linux/reboot.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/pci.h>
-#include <asm/mach/time.h>
-#include <asm/mach-types.h>
-#include <asm/page.h>
-
-#include "hardware.h"
-#include "irqs.h"
-#include "gpio-iop32x.h"
-
-/*
- * N2100 timer tick configuration.
- */
-static void __init n2100_timer_init(void)
-{
- /* 33.000 MHz crystal. */
- iop_init_time(198000000);
-}
-
-
-/*
- * N2100 I/O.
- */
-static struct map_desc n2100_io_desc[] __initdata = {
- { /* on-board devices */
- .virtual = N2100_UART,
- .pfn = __phys_to_pfn(N2100_UART),
- .length = 0x00100000,
- .type = MT_DEVICE
- },
-};
-
-void __init n2100_map_io(void)
-{
- iop3xx_map_io();
- iotable_init(n2100_io_desc, ARRAY_SIZE(n2100_io_desc));
-}
-
-
-/*
- * N2100 PCI.
- */
-static int n2100_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- int irq;
-
- if (PCI_SLOT(dev->devfn) == 1) {
- /* RTL8110SB #1 */
- irq = IRQ_IOP32X_XINT0;
- } else if (PCI_SLOT(dev->devfn) == 2) {
- /* RTL8110SB #2 */
- irq = IRQ_IOP32X_XINT3;
- } else if (PCI_SLOT(dev->devfn) == 3) {
- /* Sil3512 */
- irq = IRQ_IOP32X_XINT2;
- } else if (PCI_SLOT(dev->devfn) == 4 && pin == 1) {
- /* VT6212 INTA */
- irq = IRQ_IOP32X_XINT1;
- } else if (PCI_SLOT(dev->devfn) == 4 && pin == 2) {
- /* VT6212 INTB */
- irq = IRQ_IOP32X_XINT0;
- } else if (PCI_SLOT(dev->devfn) == 4 && pin == 3) {
- /* VT6212 INTC */
- irq = IRQ_IOP32X_XINT2;
- } else if (PCI_SLOT(dev->devfn) == 5) {
- /* Mini-PCI slot */
- irq = IRQ_IOP32X_XINT3;
- } else {
- printk(KERN_ERR "n2100_pci_map_irq() called for unknown "
- "device PCI:%d:%d:%d\n", dev->bus->number,
- PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
- irq = -1;
- }
-
- return irq;
-}
-
-static struct hw_pci n2100_pci __initdata = {
- .nr_controllers = 1,
- .ops = &iop3xx_ops,
- .setup = iop3xx_pci_setup,
- .preinit = iop3xx_pci_preinit,
- .map_irq = n2100_pci_map_irq,
-};
-
-/*
- * Both r8169 chips on the n2100 exhibit PCI parity problems. Turn
- * off parity reporting for both ports so we don't get error interrupts
- * for them.
- */
-static void n2100_fixup_r8169(struct pci_dev *dev)
-{
- if (dev->bus->number == 0 &&
- (dev->devfn == PCI_DEVFN(1, 0) ||
- dev->devfn == PCI_DEVFN(2, 0)))
- pci_disable_parity(dev);
-}
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_REALTEK, PCI_ANY_ID, n2100_fixup_r8169);
-
-static int __init n2100_pci_init(void)
-{
- if (machine_is_n2100())
- pci_common_init(&n2100_pci);
-
- return 0;
-}
-
-subsys_initcall(n2100_pci_init);
-
-
-/*
- * N2100 machine initialisation.
- */
-static struct physmap_flash_data n2100_flash_data = {
- .width = 2,
-};
-
-static struct resource n2100_flash_resource = {
- .start = 0xf0000000,
- .end = 0xf0ffffff,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device n2100_flash_device = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &n2100_flash_data,
- },
- .num_resources = 1,
- .resource = &n2100_flash_resource,
-};
-
-
-static struct plat_serial8250_port n2100_serial_port[] = {
- {
- .mapbase = N2100_UART,
- .membase = (char *)N2100_UART,
- .irq = 0,
- .flags = UPF_SKIP_TEST | UPF_AUTO_IRQ | UPF_SHARE_IRQ,
- .iotype = UPIO_MEM,
- .regshift = 0,
- .uartclk = 1843200,
- },
- { },
-};
-
-static struct resource n2100_uart_resource = {
- .start = N2100_UART,
- .end = N2100_UART + 7,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device n2100_serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = n2100_serial_port,
- },
- .num_resources = 1,
- .resource = &n2100_uart_resource,
-};
-
-static struct f75375s_platform_data n2100_f75375s = {
- .pwm = { 255, 255 },
- .pwm_enable = { 0, 0 },
-};
-
-static struct pca9532_platform_data n2100_leds = {
- .leds = {
- { .name = "n2100:red:satafail0",
- .state = PCA9532_OFF,
- .type = PCA9532_TYPE_LED,
- },
- { .name = "n2100:red:satafail1",
- .state = PCA9532_OFF,
- .type = PCA9532_TYPE_LED,
- },
- { .name = "n2100:blue:usb",
- .state = PCA9532_OFF,
- .type = PCA9532_TYPE_LED,
- },
- { .type = PCA9532_TYPE_NONE },
-
- { .type = PCA9532_TYPE_NONE },
- { .type = PCA9532_TYPE_NONE },
- { .type = PCA9532_TYPE_NONE },
- { .name = "n2100:red:usb",
- .state = PCA9532_OFF,
- .type = PCA9532_TYPE_LED,
- },
-
- { .type = PCA9532_TYPE_NONE }, /* power OFF gpio */
- { .type = PCA9532_TYPE_NONE }, /* reset gpio */
- { .type = PCA9532_TYPE_NONE },
- { .type = PCA9532_TYPE_NONE },
-
- { .type = PCA9532_TYPE_NONE },
- { .name = "n2100:orange:system",
- .state = PCA9532_OFF,
- .type = PCA9532_TYPE_LED,
- },
- { .name = "n2100:red:system",
- .state = PCA9532_OFF,
- .type = PCA9532_TYPE_LED,
- },
- { .name = "N2100 beeper" ,
- .state = PCA9532_OFF,
- .type = PCA9532_TYPE_N2100_BEEP,
- },
- },
- .psc = { 0, 0 },
- .pwm = { 0, 0 },
-};
-
-static struct i2c_board_info __initdata n2100_i2c_devices[] = {
- {
- I2C_BOARD_INFO("rs5c372b", 0x32),
- },
- {
- I2C_BOARD_INFO("f75375", 0x2e),
- .platform_data = &n2100_f75375s,
- },
- {
- I2C_BOARD_INFO("pca9532", 0x60),
- .platform_data = &n2100_leds,
- },
-};
-
-/*
- * Pull PCA9532 GPIO #8 low to power off the machine.
- */
-static void n2100_power_off(void)
-{
- local_irq_disable();
-
- /* Start condition, I2C address of PCA9532, write transaction. */
- *IOP3XX_IDBR0 = 0xc0;
- *IOP3XX_ICR0 = 0xe9;
- mdelay(1);
-
- /* Write address 0x08. */
- *IOP3XX_IDBR0 = 0x08;
- *IOP3XX_ICR0 = 0xe8;
- mdelay(1);
-
- /* Write data 0x01, stop condition. */
- *IOP3XX_IDBR0 = 0x01;
- *IOP3XX_ICR0 = 0xea;
-
- while (1)
- ;
-}
-
-static void n2100_restart(enum reboot_mode mode, const char *cmd)
-{
- int ret;
-
- ret = gpio_direction_output(N2100_HARDWARE_RESET, 0);
- if (ret) {
- pr_crit("could not drive reset GPIO low\n");
- return;
- }
- /* Wait for reset to happen */
- while (1)
- ;
-}
-
-
-static struct timer_list power_button_poll_timer;
-
-static void power_button_poll(struct timer_list *unused)
-{
- if (gpio_get_value(N2100_POWER_BUTTON) == 0) {
- ctrl_alt_del();
- return;
- }
-
- power_button_poll_timer.expires = jiffies + (HZ / 10);
- add_timer(&power_button_poll_timer);
-}
-
-static int __init n2100_request_gpios(void)
-{
- int ret;
-
- if (!machine_is_n2100())
- return 0;
-
- ret = gpio_request(N2100_HARDWARE_RESET, "reset");
- if (ret)
- pr_err("could not request reset GPIO\n");
-
- ret = gpio_request(N2100_POWER_BUTTON, "power");
- if (ret)
- pr_err("could not request power GPIO\n");
- else {
- ret = gpio_direction_input(N2100_POWER_BUTTON);
- if (ret)
- pr_err("could not set power GPIO as input\n");
- }
- /* Set up power button poll timer */
- timer_setup(&power_button_poll_timer, power_button_poll, 0);
- power_button_poll_timer.expires = jiffies + (HZ / 10);
- add_timer(&power_button_poll_timer);
- return 0;
-}
-device_initcall(n2100_request_gpios);
-
-static void __init n2100_init_machine(void)
-{
- register_iop32x_gpio();
- gpiod_add_lookup_table(&iop3xx_i2c0_gpio_lookup);
- platform_device_register(&iop3xx_i2c0_device);
- platform_device_register(&n2100_flash_device);
- platform_device_register(&n2100_serial_device);
- platform_device_register(&iop3xx_dma_0_channel);
- platform_device_register(&iop3xx_dma_1_channel);
-
- i2c_register_board_info(0, n2100_i2c_devices,
- ARRAY_SIZE(n2100_i2c_devices));
-
- pm_power_off = n2100_power_off;
-}
-
-MACHINE_START(N2100, "Thecus N2100")
- /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .atag_offset = 0x100,
- .nr_irqs = IOP32X_NR_IRQS,
- .map_io = n2100_map_io,
- .init_irq = iop32x_init_irq,
- .init_time = n2100_timer_init,
- .init_machine = n2100_init_machine,
- .restart = n2100_restart,
-MACHINE_END
diff --git a/arch/arm/mach-iop32x/n2100.h b/arch/arm/mach-iop32x/n2100.h
deleted file mode 100644
index 0b97b940d3e7..000000000000
--- a/arch/arm/mach-iop32x/n2100.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Thecus N2100 board registers
- */
-
-#ifndef __N2100_H
-#define __N2100_H
-
-#define N2100_UART 0xfe800000 /* UART */
-
-#define N2100_COPY_BUTTON IOP3XX_GPIO_LINE(0)
-#define N2100_PCA9532_RESET IOP3XX_GPIO_LINE(2)
-#define N2100_RESET_BUTTON IOP3XX_GPIO_LINE(3)
-#define N2100_HARDWARE_RESET IOP3XX_GPIO_LINE(4)
-#define N2100_POWER_BUTTON IOP3XX_GPIO_LINE(5)
-
-
-#endif
diff --git a/arch/arm/mach-iop32x/pci.c b/arch/arm/mach-iop32x/pci.c
deleted file mode 100644
index 7a215d2ee7e2..000000000000
--- a/arch/arm/mach-iop32x/pci.c
+++ /dev/null
@@ -1,404 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/plat-iop/pci.c
- *
- * PCI support for the Intel IOP32X and IOP33X processors
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-#include <asm/irq.h>
-#include <asm/signal.h>
-#include <asm/mach/pci.h>
-#include "hardware.h"
-#include "iop3xx.h"
-
-// #define DEBUG
-
-#ifdef DEBUG
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...) do { } while (0)
-#endif
-
-/*
- * This routine builds either a type0 or type1 configuration command. If the
- * bus is on the 803xx then a type0 made, else a type1 is created.
- */
-static u32 iop3xx_cfg_address(struct pci_bus *bus, int devfn, int where)
-{
- struct pci_sys_data *sys = bus->sysdata;
- u32 addr;
-
- if (sys->busnr == bus->number)
- addr = 1 << (PCI_SLOT(devfn) + 16) | (PCI_SLOT(devfn) << 11);
- else
- addr = bus->number << 16 | PCI_SLOT(devfn) << 11 | 1;
-
- addr |= PCI_FUNC(devfn) << 8 | (where & ~3);
-
- return addr;
-}
-
-/*
- * This routine checks the status of the last configuration cycle. If an error
- * was detected it returns a 1, else it returns a 0. The errors being checked
- * are parity, master abort, target abort (master and target). These types of
- * errors occur during a config cycle where there is no device, like during
- * the discovery stage.
- */
-static int iop3xx_pci_status(void)
-{
- unsigned int status;
- int ret = 0;
-
- /*
- * Check the status registers.
- */
- status = *IOP3XX_ATUSR;
- if (status & 0xf900) {
- DBG("\t\t\tPCI: P0 - status = 0x%08x\n", status);
- *IOP3XX_ATUSR = status & 0xf900;
- ret = 1;
- }
-
- status = *IOP3XX_ATUISR;
- if (status & 0x679f) {
- DBG("\t\t\tPCI: P1 - status = 0x%08x\n", status);
- *IOP3XX_ATUISR = status & 0x679f;
- ret = 1;
- }
-
- return ret;
-}
-
-/*
- * Simply write the address register and read the configuration
- * data. Note that the 4 nops ensure that we are able to handle
- * a delayed abort (in theory.)
- */
-static u32 iop3xx_read(unsigned long addr)
-{
- u32 val;
-
- __asm__ __volatile__(
- "str %1, [%2]\n\t"
- "ldr %0, [%3]\n\t"
- "nop\n\t"
- "nop\n\t"
- "nop\n\t"
- "nop\n\t"
- : "=r" (val)
- : "r" (addr), "r" (IOP3XX_OCCAR), "r" (IOP3XX_OCCDR));
-
- return val;
-}
-
-/*
- * The read routines must check the error status of the last configuration
- * cycle. If there was an error, the routine returns all hex f's.
- */
-static int
-iop3xx_read_config(struct pci_bus *bus, unsigned int devfn, int where,
- int size, u32 *value)
-{
- unsigned long addr = iop3xx_cfg_address(bus, devfn, where);
- u32 val = iop3xx_read(addr) >> ((where & 3) * 8);
-
- if (iop3xx_pci_status())
- val = 0xffffffff;
-
- *value = val;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-iop3xx_write_config(struct pci_bus *bus, unsigned int devfn, int where,
- int size, u32 value)
-{
- unsigned long addr = iop3xx_cfg_address(bus, devfn, where);
- u32 val;
-
- if (size != 4) {
- val = iop3xx_read(addr);
- if (iop3xx_pci_status())
- return PCIBIOS_SUCCESSFUL;
-
- where = (where & 3) * 8;
-
- if (size == 1)
- val &= ~(0xff << where);
- else
- val &= ~(0xffff << where);
-
- *IOP3XX_OCCDR = val | value << where;
- } else {
- asm volatile(
- "str %1, [%2]\n\t"
- "str %0, [%3]\n\t"
- "nop\n\t"
- "nop\n\t"
- "nop\n\t"
- "nop\n\t"
- :
- : "r" (value), "r" (addr),
- "r" (IOP3XX_OCCAR), "r" (IOP3XX_OCCDR));
- }
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops iop3xx_ops = {
- .read = iop3xx_read_config,
- .write = iop3xx_write_config,
-};
-
-/*
- * When a PCI device does not exist during config cycles, the 80200 gets a
- * bus error instead of returning 0xffffffff. This handler simply returns.
- */
-static int
-iop3xx_pci_abort(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
-{
- DBG("PCI abort: address = 0x%08lx fsr = 0x%03x PC = 0x%08lx LR = 0x%08lx\n",
- addr, fsr, regs->ARM_pc, regs->ARM_lr);
-
- /*
- * If it was an imprecise abort, then we need to correct the
- * return address to be _after_ the instruction.
- */
- if (fsr & (1 << 10))
- regs->ARM_pc += 4;
-
- return 0;
-}
-
-int iop3xx_pci_setup(int nr, struct pci_sys_data *sys)
-{
- struct resource *res;
- struct resource realio;
-
- if (nr != 0)
- return 0;
-
- res = kzalloc(sizeof(struct resource), GFP_KERNEL);
- if (!res)
- panic("PCI: unable to alloc resources");
-
- res->start = IOP3XX_PCI_LOWER_MEM_PA;
- res->end = IOP3XX_PCI_LOWER_MEM_PA + IOP3XX_PCI_MEM_WINDOW_SIZE - 1;
- res->name = "IOP3XX PCI Memory Space";
- res->flags = IORESOURCE_MEM;
- request_resource(&iomem_resource, res);
-
- /*
- * Use whatever translation is already setup.
- */
- sys->mem_offset = IOP3XX_PCI_LOWER_MEM_PA - *IOP3XX_OMWTVR0;
-
- pci_add_resource_offset(&sys->resources, res, sys->mem_offset);
-
- realio.start = 0;
- realio.end = realio.start + SZ_64K - 1;
- pci_remap_iospace(&realio, IOP3XX_PCI_LOWER_IO_PA);
-
- return 1;
-}
-
-void __init iop3xx_atu_setup(void)
-{
- /* BAR 0 ( Disabled ) */
- *IOP3XX_IAUBAR0 = 0x0;
- *IOP3XX_IABAR0 = 0x0;
- *IOP3XX_IATVR0 = 0x0;
- *IOP3XX_IALR0 = 0x0;
-
- /* BAR 1 ( Disabled ) */
- *IOP3XX_IAUBAR1 = 0x0;
- *IOP3XX_IABAR1 = 0x0;
- *IOP3XX_IALR1 = 0x0;
-
- /* BAR 2 (1:1 mapping with Physical RAM) */
- /* Set limit and enable */
- *IOP3XX_IALR2 = ~((u32)IOP3XX_MAX_RAM_SIZE - 1) & ~0x1;
- *IOP3XX_IAUBAR2 = 0x0;
-
- /* Align the inbound bar with the base of memory */
- *IOP3XX_IABAR2 = PHYS_OFFSET |
- PCI_BASE_ADDRESS_MEM_TYPE_64 |
- PCI_BASE_ADDRESS_MEM_PREFETCH;
-
- *IOP3XX_IATVR2 = PHYS_OFFSET;
-
- /* Outbound window 0 */
- *IOP3XX_OMWTVR0 = IOP3XX_PCI_LOWER_MEM_BA;
- *IOP3XX_OUMWTVR0 = 0;
-
- /* Outbound window 1 */
- *IOP3XX_OMWTVR1 = IOP3XX_PCI_LOWER_MEM_BA +
- IOP3XX_PCI_MEM_WINDOW_SIZE / 2;
- *IOP3XX_OUMWTVR1 = 0;
-
- /* BAR 3 ( Disabled ) */
- *IOP3XX_IAUBAR3 = 0x0;
- *IOP3XX_IABAR3 = 0x0;
- *IOP3XX_IATVR3 = 0x0;
- *IOP3XX_IALR3 = 0x0;
-
- /* Setup the I/O Bar
- */
- *IOP3XX_OIOWTVR = IOP3XX_PCI_LOWER_IO_BA;
-
- /* Enable inbound and outbound cycles
- */
- *IOP3XX_ATUCMD |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
- PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
- *IOP3XX_ATUCR |= IOP3XX_ATUCR_OUT_EN;
-}
-
-void __init iop3xx_atu_disable(void)
-{
- *IOP3XX_ATUCMD = 0;
- *IOP3XX_ATUCR = 0;
-
- /* wait for cycles to quiesce */
- while (*IOP3XX_PCSR & (IOP3XX_PCSR_OUT_Q_BUSY |
- IOP3XX_PCSR_IN_Q_BUSY))
- cpu_relax();
-
- /* BAR 0 ( Disabled ) */
- *IOP3XX_IAUBAR0 = 0x0;
- *IOP3XX_IABAR0 = 0x0;
- *IOP3XX_IATVR0 = 0x0;
- *IOP3XX_IALR0 = 0x0;
-
- /* BAR 1 ( Disabled ) */
- *IOP3XX_IAUBAR1 = 0x0;
- *IOP3XX_IABAR1 = 0x0;
- *IOP3XX_IALR1 = 0x0;
-
- /* BAR 2 ( Disabled ) */
- *IOP3XX_IAUBAR2 = 0x0;
- *IOP3XX_IABAR2 = 0x0;
- *IOP3XX_IATVR2 = 0x0;
- *IOP3XX_IALR2 = 0x0;
-
- /* BAR 3 ( Disabled ) */
- *IOP3XX_IAUBAR3 = 0x0;
- *IOP3XX_IABAR3 = 0x0;
- *IOP3XX_IATVR3 = 0x0;
- *IOP3XX_IALR3 = 0x0;
-
- /* Clear the outbound windows */
- *IOP3XX_OIOWTVR = 0;
-
- /* Outbound window 0 */
- *IOP3XX_OMWTVR0 = 0;
- *IOP3XX_OUMWTVR0 = 0;
-
- /* Outbound window 1 */
- *IOP3XX_OMWTVR1 = 0;
- *IOP3XX_OUMWTVR1 = 0;
-}
-
-/* Flag to determine whether the ATU is initialized and the PCI bus scanned */
-int init_atu;
-
-int iop3xx_get_init_atu(void) {
- /* check if default has been overridden */
- if (init_atu != IOP3XX_INIT_ATU_DEFAULT)
- return init_atu;
- else
- return IOP3XX_INIT_ATU_DISABLE;
-}
-
-static void __init iop3xx_atu_debug(void)
-{
- DBG("PCI: Intel IOP3xx PCI init.\n");
- DBG("PCI: Outbound memory window 0: PCI 0x%08x%08x\n",
- *IOP3XX_OUMWTVR0, *IOP3XX_OMWTVR0);
- DBG("PCI: Outbound memory window 1: PCI 0x%08x%08x\n",
- *IOP3XX_OUMWTVR1, *IOP3XX_OMWTVR1);
- DBG("PCI: Outbound IO window: PCI 0x%08x\n",
- *IOP3XX_OIOWTVR);
-
- DBG("PCI: Inbound memory window 0: PCI 0x%08x%08x 0x%08x -> 0x%08x\n",
- *IOP3XX_IAUBAR0, *IOP3XX_IABAR0, *IOP3XX_IALR0, *IOP3XX_IATVR0);
- DBG("PCI: Inbound memory window 1: PCI 0x%08x%08x 0x%08x\n",
- *IOP3XX_IAUBAR1, *IOP3XX_IABAR1, *IOP3XX_IALR1);
- DBG("PCI: Inbound memory window 2: PCI 0x%08x%08x 0x%08x -> 0x%08x\n",
- *IOP3XX_IAUBAR2, *IOP3XX_IABAR2, *IOP3XX_IALR2, *IOP3XX_IATVR2);
- DBG("PCI: Inbound memory window 3: PCI 0x%08x%08x 0x%08x -> 0x%08x\n",
- *IOP3XX_IAUBAR3, *IOP3XX_IABAR3, *IOP3XX_IALR3, *IOP3XX_IATVR3);
-
- DBG("PCI: Expansion ROM window: PCI 0x%08x%08x 0x%08x -> 0x%08x\n",
- 0, *IOP3XX_ERBAR, *IOP3XX_ERLR, *IOP3XX_ERTVR);
-
- DBG("ATU: IOP3XX_ATUCMD=0x%04x\n", *IOP3XX_ATUCMD);
- DBG("ATU: IOP3XX_ATUCR=0x%08x\n", *IOP3XX_ATUCR);
-
- hook_fault_code(16+6, iop3xx_pci_abort, SIGBUS, 0, "imprecise external abort");
-}
-
-/* for platforms that might be host-bus-adapters */
-void __init iop3xx_pci_preinit_cond(void)
-{
- if (iop3xx_get_init_atu() == IOP3XX_INIT_ATU_ENABLE) {
- iop3xx_atu_disable();
- iop3xx_atu_setup();
- iop3xx_atu_debug();
- }
-}
-
-void __init iop3xx_pci_preinit(void)
-{
- pcibios_min_mem = 0;
-
- iop3xx_atu_disable();
- iop3xx_atu_setup();
- iop3xx_atu_debug();
-}
-
-/* allow init_atu to be user overridden */
-static int __init iop3xx_init_atu_setup(char *str)
-{
- init_atu = IOP3XX_INIT_ATU_DEFAULT;
- if (str) {
- while (*str != '\0') {
- switch (*str) {
- case 'y':
- case 'Y':
- init_atu = IOP3XX_INIT_ATU_ENABLE;
- break;
- case 'n':
- case 'N':
- init_atu = IOP3XX_INIT_ATU_DISABLE;
- break;
- case ',':
- case '=':
- break;
- default:
- printk(KERN_DEBUG "\"%s\" malformed at "
- "character: \'%c\'",
- __func__,
- *str);
- *(str + 1) = '\0';
- }
- str++;
- }
- }
-
- return 1;
-}
-
-__setup("iop3xx_init_atu", iop3xx_init_atu_setup);
-
diff --git a/arch/arm/mach-iop32x/pmu.c b/arch/arm/mach-iop32x/pmu.c
deleted file mode 100644
index bdbc7a3cb8a3..000000000000
--- a/arch/arm/mach-iop32x/pmu.c
+++ /dev/null
@@ -1,29 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * PMU IRQ registration for the iop3xx xscale PMU families.
- * Copyright (C) 2010 Will Deacon, ARM Ltd.
- */
-
-#include <linux/platform_device.h>
-#include "irqs.h"
-
-static struct resource pmu_resource = {
- .start = IRQ_IOP32X_CORE_PMU,
- .end = IRQ_IOP32X_CORE_PMU,
- .flags = IORESOURCE_IRQ,
-};
-
-static struct platform_device pmu_device = {
- .name = "xscale-pmu",
- .id = -1,
- .resource = &pmu_resource,
- .num_resources = 1,
-};
-
-static int __init iop3xx_pmu_init(void)
-{
- platform_device_register(&pmu_device);
- return 0;
-}
-
-arch_initcall(iop3xx_pmu_init);
diff --git a/arch/arm/mach-iop32x/restart.c b/arch/arm/mach-iop32x/restart.c
deleted file mode 100644
index 3dfa54d3a7a8..000000000000
--- a/arch/arm/mach-iop32x/restart.c
+++ /dev/null
@@ -1,17 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * restart.c
- *
- * Copyright (C) 2001 MontaVista Software, Inc.
- */
-#include <asm/system_misc.h>
-#include "hardware.h"
-#include "iop3xx.h"
-
-void iop3xx_restart(enum reboot_mode mode, const char *cmd)
-{
- *IOP3XX_PCSR = 0x30;
-
- /* Jump into ROM at address 0 */
- soft_restart(0);
-}
diff --git a/arch/arm/mach-iop32x/setup.c b/arch/arm/mach-iop32x/setup.c
deleted file mode 100644
index a0a81c28a632..000000000000
--- a/arch/arm/mach-iop32x/setup.c
+++ /dev/null
@@ -1,31 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/plat-iop/setup.c
- *
- * Author: Nicolas Pitre <nico@fluxnic.net>
- * Copyright (C) 2001 MontaVista Software, Inc.
- * Copyright (C) 2004 Intel Corporation.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <asm/mach/map.h>
-#include "iop3xx.h"
-
-/*
- * Standard IO mapping for all IOP3xx based systems. Note that
- * the IOP3xx OCCDR must be mapped uncached and unbuffered.
- */
-static struct map_desc iop3xx_std_desc[] __initdata = {
- { /* mem mapped registers */
- .virtual = IOP3XX_PERIPHERAL_VIRT_BASE,
- .pfn = __phys_to_pfn(IOP3XX_PERIPHERAL_PHYS_BASE),
- .length = IOP3XX_PERIPHERAL_SIZE,
- .type = MT_UNCACHED,
- },
-};
-
-void __init iop3xx_map_io(void)
-{
- iotable_init(iop3xx_std_desc, ARRAY_SIZE(iop3xx_std_desc));
-}
diff --git a/arch/arm/mach-iop32x/time.c b/arch/arm/mach-iop32x/time.c
deleted file mode 100644
index ae533b66fefd..000000000000
--- a/arch/arm/mach-iop32x/time.c
+++ /dev/null
@@ -1,179 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/plat-iop/time.c
- *
- * Timer code for IOP32x and IOP33x based systems
- *
- * Author: Deepak Saxena <dsaxena@mvista.com>
- *
- * Copyright 2002-2003 MontaVista Software Inc.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/time.h>
-#include <linux/init.h>
-#include <linux/timex.h>
-#include <linux/io.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-#include <linux/export.h>
-#include <linux/sched_clock.h>
-#include <asm/irq.h>
-#include <linux/uaccess.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-
-#include "hardware.h"
-#include "irqs.h"
-
-/*
- * Minimum clocksource/clockevent timer range in seconds
- */
-#define IOP_MIN_RANGE 4
-
-/*
- * IOP clocksource (free-running timer 1).
- */
-static u64 notrace iop_clocksource_read(struct clocksource *unused)
-{
- return 0xffffffffu - read_tcr1();
-}
-
-static struct clocksource iop_clocksource = {
- .name = "iop_timer1",
- .rating = 300,
- .read = iop_clocksource_read,
- .mask = CLOCKSOURCE_MASK(32),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-/*
- * IOP sched_clock() implementation via its clocksource.
- */
-static u64 notrace iop_read_sched_clock(void)
-{
- return 0xffffffffu - read_tcr1();
-}
-
-/*
- * IOP clockevents (interrupting timer 0).
- */
-static int iop_set_next_event(unsigned long delta,
- struct clock_event_device *unused)
-{
- u32 tmr = IOP_TMR_PRIVILEGED | IOP_TMR_RATIO_1_1;
-
- BUG_ON(delta == 0);
- write_tmr0(tmr & ~(IOP_TMR_EN | IOP_TMR_RELOAD));
- write_tcr0(delta);
- write_tmr0((tmr & ~IOP_TMR_RELOAD) | IOP_TMR_EN);
-
- return 0;
-}
-
-static unsigned long ticks_per_jiffy;
-
-static int iop_set_periodic(struct clock_event_device *evt)
-{
- u32 tmr = read_tmr0();
-
- write_tmr0(tmr & ~IOP_TMR_EN);
- write_tcr0(ticks_per_jiffy - 1);
- write_trr0(ticks_per_jiffy - 1);
- tmr |= (IOP_TMR_RELOAD | IOP_TMR_EN);
-
- write_tmr0(tmr);
- return 0;
-}
-
-static int iop_set_oneshot(struct clock_event_device *evt)
-{
- u32 tmr = read_tmr0();
-
- /* ->set_next_event sets period and enables timer */
- tmr &= ~(IOP_TMR_RELOAD | IOP_TMR_EN);
- write_tmr0(tmr);
- return 0;
-}
-
-static int iop_shutdown(struct clock_event_device *evt)
-{
- u32 tmr = read_tmr0();
-
- tmr &= ~IOP_TMR_EN;
- write_tmr0(tmr);
- return 0;
-}
-
-static int iop_resume(struct clock_event_device *evt)
-{
- u32 tmr = read_tmr0();
-
- tmr |= IOP_TMR_EN;
- write_tmr0(tmr);
- return 0;
-}
-
-static struct clock_event_device iop_clockevent = {
- .name = "iop_timer0",
- .features = CLOCK_EVT_FEAT_PERIODIC |
- CLOCK_EVT_FEAT_ONESHOT,
- .rating = 300,
- .set_next_event = iop_set_next_event,
- .set_state_shutdown = iop_shutdown,
- .set_state_periodic = iop_set_periodic,
- .tick_resume = iop_resume,
- .set_state_oneshot = iop_set_oneshot,
-};
-
-static irqreturn_t
-iop_timer_interrupt(int irq, void *dev_id)
-{
- struct clock_event_device *evt = dev_id;
-
- write_tisr(1);
- evt->event_handler(evt);
- return IRQ_HANDLED;
-}
-
-static unsigned long iop_tick_rate;
-unsigned long get_iop_tick_rate(void)
-{
- return iop_tick_rate;
-}
-EXPORT_SYMBOL(get_iop_tick_rate);
-
-void __init iop_init_time(unsigned long tick_rate)
-{
- u32 timer_ctl;
- int irq = IRQ_IOP32X_TIMER0;
-
- sched_clock_register(iop_read_sched_clock, 32, tick_rate);
-
- ticks_per_jiffy = DIV_ROUND_CLOSEST(tick_rate, HZ);
- iop_tick_rate = tick_rate;
-
- timer_ctl = IOP_TMR_EN | IOP_TMR_PRIVILEGED |
- IOP_TMR_RELOAD | IOP_TMR_RATIO_1_1;
-
- /*
- * Set up interrupting clockevent timer 0.
- */
- write_tmr0(timer_ctl & ~IOP_TMR_EN);
- write_tisr(1);
- if (request_irq(irq, iop_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
- "IOP Timer Tick", &iop_clockevent))
- pr_err("Failed to request irq() %d (IOP Timer Tick)\n", irq);
- iop_clockevent.cpumask = cpumask_of(0);
- clockevents_config_and_register(&iop_clockevent, tick_rate,
- 0xf, 0xfffffffe);
-
- /*
- * Set up free-running clocksource timer 1.
- */
- write_trr1(0xffffffff);
- write_tcr1(0xffffffff);
- write_tmr1(timer_ctl);
- clocksource_register_hz(&iop_clocksource, tick_rate);
-}
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 264e780ae32e..e488e1b8e803 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -723,11 +723,11 @@ config I2C_IMX_LPI2C
will be called i2c-imx-lpi2c.
config I2C_IOP3XX
- tristate "Intel IOPx3xx and IXP4xx on-chip I2C interface"
- depends on ARCH_IOP32X || ARCH_IXP4XX || COMPILE_TEST
+ tristate "Intel IXP4xx on-chip I2C interface"
+ depends on ARCH_IXP4XX || COMPILE_TEST
help
Say Y here if you want to use the IIC bus controller on
- the Intel IOPx3xx I/O Processors or IXP4xx Network Processors.
+ the Intel IXP4xx Network Processors.
This driver can also be built as a module. If so, the module
will be called i2c-iop3xx.
--
2.29.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-10-19 15:21 UTC|newest]
Thread overview: 115+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-19 14:40 [PATCH 00/17] ARM: remove old board files Arnd Bergmann
2022-10-19 14:40 ` Arnd Bergmann
2022-10-19 14:40 ` Arnd Bergmann
2022-10-19 14:40 ` Arnd Bergmann
2022-10-19 15:03 ` [PATCH 01/17] ARM: at91: remove stale MAINTAINER file entries Arnd Bergmann
2022-10-19 15:03 ` Arnd Bergmann
2022-10-19 15:03 ` [PATCH 02/17] ARM: cns3xxx: remove entire platform Arnd Bergmann
2022-10-19 15:03 ` Arnd Bergmann
2022-10-21 7:19 ` Krzysztof Hałasa
2022-10-21 7:19 ` Krzysztof Hałasa
2022-10-19 15:03 ` [PATCH 03/17] mmc: remove cns3xxx driver Arnd Bergmann
2022-10-19 15:03 ` Arnd Bergmann
2022-10-20 10:36 ` Ulf Hansson
2022-10-20 10:36 ` Ulf Hansson
2022-10-19 15:03 ` [PATCH 04/17] ARM: ep93xx: remove old board files Arnd Bergmann
2022-10-19 15:03 ` Arnd Bergmann
2022-10-20 17:08 ` Alexander Sverdlin
2022-10-20 17:08 ` Alexander Sverdlin
2022-10-19 15:03 ` [PATCH 05/17] ASoC: remove unused ep93xx files Arnd Bergmann
2022-10-19 15:03 ` Arnd Bergmann
2022-10-19 15:03 ` Arnd Bergmann
2022-10-19 15:30 ` Mark Brown
2022-10-19 15:30 ` Mark Brown
2022-10-19 15:30 ` Mark Brown
2022-10-19 15:03 ` [PATCH 06/17] ARM: mv78xx0: un-deprecate Terastation WXL Arnd Bergmann
2022-10-19 15:03 ` Arnd Bergmann
2022-10-19 15:03 ` [PATCH 07/17] ARM: orion: remove unused board files Arnd Bergmann
2022-10-19 15:03 ` Arnd Bergmann
2022-10-19 15:03 ` [PATCH 08/17] ARM: orion5x: remove dsa_chip_data references Arnd Bergmann
2022-10-19 15:03 ` Arnd Bergmann
2022-10-19 15:03 ` Arnd Bergmann [this message]
2022-10-19 15:03 ` [PATCH 09/17] ARM: iop32x: remove the platform Arnd Bergmann
2022-10-19 16:29 ` Dan Williams
2022-10-19 16:29 ` Dan Williams
2022-10-19 19:30 ` Wolfram Sang
2022-10-19 19:30 ` Wolfram Sang
2022-10-19 15:03 ` [PATCH 10/17] dmaengine: remove iop-adma driver Arnd Bergmann
2022-10-19 15:03 ` Arnd Bergmann
2022-10-19 16:30 ` Dan Williams
2022-10-19 16:30 ` Dan Williams
2022-10-19 16:56 ` Vinod Koul
2022-10-19 16:56 ` Vinod Koul
2022-10-19 15:03 ` [PATCH 11/17] gpio: remove iop driver Arnd Bergmann
2022-10-19 15:03 ` Arnd Bergmann
2022-10-20 7:52 ` Linus Walleij
2022-10-20 7:52 ` Linus Walleij
2022-10-20 11:35 ` Bartosz Golaszewski
2022-10-20 11:35 ` Bartosz Golaszewski
2022-10-19 15:03 ` [PATCH 12/17] ARM: footbridge: remove CATS Arnd Bergmann
2022-10-19 15:03 ` Arnd Bergmann
2022-10-19 19:45 ` Linus Walleij
2022-10-19 19:45 ` Linus Walleij
2022-10-19 15:03 ` [PATCH 13/17] ARM: omap1: remove unused board files Arnd Bergmann
2022-10-19 17:15 ` Aaro Koskinen
2022-10-19 17:15 ` Aaro Koskinen
2022-10-20 7:11 ` Arnd Bergmann
2022-10-20 7:11 ` Arnd Bergmann
2022-10-20 19:35 ` Aaro Koskinen
2022-10-20 19:35 ` Aaro Koskinen
2022-10-21 6:52 ` Arnd Bergmann
2022-10-21 6:52 ` Arnd Bergmann
2022-10-21 11:11 ` Aaro Koskinen
2022-10-21 11:11 ` Aaro Koskinen
2022-10-24 5:49 ` Tony Lindgren
2022-10-24 5:49 ` Tony Lindgren
2022-10-24 16:02 ` Arnd Bergmann
2022-10-24 16:02 ` Arnd Bergmann
2022-10-25 8:08 ` Tony Lindgren
2022-10-25 8:08 ` Tony Lindgren
2022-10-19 19:30 ` Wolfram Sang
2022-10-19 19:30 ` Wolfram Sang
2022-10-21 9:50 ` Lee Jones
2022-10-21 9:50 ` Lee Jones
2022-10-22 10:24 ` Greg Kroah-Hartman
2022-10-22 10:24 ` Greg Kroah-Hartman
2022-10-24 5:45 ` Tony Lindgren
2022-10-24 5:45 ` Tony Lindgren
2022-10-19 15:03 ` [PATCH 14/17] ARM: omap1: remove dead code Arnd Bergmann
2022-10-19 15:03 ` Arnd Bergmann
2022-10-19 15:03 ` Arnd Bergmann
2022-10-19 17:34 ` Aaro Koskinen
2022-10-19 17:34 ` Aaro Koskinen
2022-10-19 17:34 ` Aaro Koskinen
2022-10-21 7:51 ` Arnd Bergmann
2022-10-21 7:51 ` Arnd Bergmann
2022-10-21 7:51 ` Arnd Bergmann
2022-10-22 10:24 ` Greg Kroah-Hartman
2022-10-22 10:24 ` Greg Kroah-Hartman
2022-10-22 10:24 ` Greg Kroah-Hartman
2022-10-24 5:49 ` Tony Lindgren
2022-10-24 5:49 ` Tony Lindgren
2022-10-24 5:49 ` Tony Lindgren
2022-10-24 18:03 ` Kevin Hilman
2022-10-24 18:03 ` Kevin Hilman
2022-10-24 18:03 ` Kevin Hilman
2022-10-19 15:03 ` [PATCH 15/17] fbdev: omapfb: remove unused board support Arnd Bergmann
2022-10-19 15:03 ` Arnd Bergmann
2022-10-19 15:03 ` Arnd Bergmann
2022-10-24 5:50 ` Tony Lindgren
2022-10-24 5:50 ` Tony Lindgren
2022-10-24 5:50 ` Tony Lindgren
2022-10-19 15:03 ` [PATCH 16/17] spi: remove omap 100K driver Arnd Bergmann
2022-10-19 15:03 ` Arnd Bergmann
2022-10-19 15:29 ` Mark Brown
2022-10-19 15:29 ` Mark Brown
2022-10-24 5:50 ` Tony Lindgren
2022-10-24 5:50 ` Tony Lindgren
2022-10-19 15:03 ` [PATCH 17/17] mfd: remove htc-i2cpld driver Arnd Bergmann
2022-10-19 15:03 ` Arnd Bergmann
2022-10-31 15:18 ` Lee Jones
2022-10-31 15:18 ` Lee Jones
2022-10-21 8:33 ` [PATCH 01/17] ARM: at91: remove stale MAINTAINER file entries Nicolas Ferre
2022-10-21 8:33 ` Nicolas Ferre
2022-10-21 9:45 ` Nicolas Ferre
2022-10-21 9:45 ` Nicolas Ferre
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221019150410.3851944-9-arnd@kernel.org \
--to=arnd@kernel.org \
--cc=arnd@arndb.de \
--cc=dan.j.williams@intel.com \
--cc=kernel@wantstofly.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=tbm@cyrius.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.