From: Arnd Bergmann <arnd@kernel.org>
To: linux-arm-kernel@lists.infradead.org,
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: linux-kernel@vger.kernel.org, Ben Dooks <ben-linux@fluff.org>,
Simtec Linux Team <linux@simtec.co.uk>,
Arnd Bergmann <arnd@arndb.de>,
Kwangwoo Lee <kwangwoo.lee@gmail.com>,
Peter Korsgaard <jacmet@sunsite.dk>,
Darius Augulis <augulis.darius@gmail.com>,
Maurus Cuelenaere <mcuelenaere@gmail.com>,
Alim Akhtar <alim.akhtar@samsung.com>,
Heiko Stuebner <heiko@sntech.de>,
Juerg Haefliger <juerg.haefliger@canonical.com>,
Sam Protsenko <semen.protsenko@linaro.org>,
linux-samsung-soc@vger.kernel.org
Subject: [PATCH 03/21] ARM: s3c: remove most s3c64xx board support
Date: Fri, 21 Oct 2022 22:27:36 +0200 [thread overview]
Message-ID: <20221021203329.4143397-3-arnd@kernel.org> (raw)
In-Reply-To: <20221021202254.4142411-1-arnd@kernel.org>
From: Arnd Bergmann <arnd@arndb.de>
All traditional board files except for MACH_WLF_CRAGG_6410 were
marked as unused, so remove them now.
Cc: Kwangwoo Lee <kwangwoo.lee@gmail.com>
Cc: Peter Korsgaard <jacmet@sunsite.dk>
Cc: Darius Augulis <augulis.darius@gmail.com>
Cc: Maurus Cuelenaere <mcuelenaere@gmail.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/mach-s3c/Kconfig.s3c64xx | 206 -------
arch/arm/mach-s3c/Makefile.s3c64xx | 13 -
arch/arm/mach-s3c/dev-backlight-s3c64xx.c | 137 -----
arch/arm/mach-s3c/mach-anw6410.c | 230 -------
arch/arm/mach-s3c/mach-hmt.c | 282 ---------
arch/arm/mach-s3c/mach-mini6410.c | 365 -----------
arch/arm/mach-s3c/mach-ncp.c | 100 ---
arch/arm/mach-s3c/mach-real6410.c | 333 ----------
arch/arm/mach-s3c/mach-smartq.c | 424 -------------
arch/arm/mach-s3c/mach-smartq.h | 16 -
arch/arm/mach-s3c/mach-smartq5.c | 154 -----
arch/arm/mach-s3c/mach-smartq7.c | 170 ------
arch/arm/mach-s3c/mach-smdk6400.c | 90 ---
arch/arm/mach-s3c/mach-smdk6410.c | 706 ----------------------
14 files changed, 3226 deletions(-)
delete mode 100644 arch/arm/mach-s3c/dev-backlight-s3c64xx.c
delete mode 100644 arch/arm/mach-s3c/mach-anw6410.c
delete mode 100644 arch/arm/mach-s3c/mach-hmt.c
delete mode 100644 arch/arm/mach-s3c/mach-mini6410.c
delete mode 100644 arch/arm/mach-s3c/mach-ncp.c
delete mode 100644 arch/arm/mach-s3c/mach-real6410.c
delete mode 100644 arch/arm/mach-s3c/mach-smartq.c
delete mode 100644 arch/arm/mach-s3c/mach-smartq.h
delete mode 100644 arch/arm/mach-s3c/mach-smartq5.c
delete mode 100644 arch/arm/mach-s3c/mach-smartq7.c
delete mode 100644 arch/arm/mach-s3c/mach-smdk6400.c
delete mode 100644 arch/arm/mach-s3c/mach-smdk6410.c
diff --git a/arch/arm/mach-s3c/Kconfig.s3c64xx b/arch/arm/mach-s3c/Kconfig.s3c64xx
index 0c1b91c3ac5f..0da214c43fba 100644
--- a/arch/arm/mach-s3c/Kconfig.s3c64xx
+++ b/arch/arm/mach-s3c/Kconfig.s3c64xx
@@ -54,17 +54,6 @@ config S3C64XX_SETUP_SDHCI
Internal configuration for default SDHCI setup for S3C6400 and
S3C6410 SoCs.
-config S3C64XX_DEV_ONENAND1
- bool
- help
- Compile in platform device definition for OneNAND1 controller
-
-config SAMSUNG_DEV_BACKLIGHT
- bool
- depends on SAMSUNG_DEV_PWM
- help
- Compile in platform device definition LCD backlight with PWM Timer
-
# platform specific device setup
config S3C64XX_SETUP_I2C0
@@ -113,201 +102,6 @@ config S3C64XX_SETUP_USB_PHY
# S36400 Macchine support
-config MACH_SMDK6400
- bool "SMDK6400"
- depends on ATAGS && UNUSED_BOARD_FILES
- select CPU_S3C6400
- select S3C64XX_SETUP_SDHCI
- select S3C_DEV_HSMMC1
- help
- Machine support for the Samsung SMDK6400
-
-# S3C6410 machine support
-
-config MACH_ANW6410
- bool "A&W6410"
- depends on ATAGS && UNUSED_BOARD_FILES
- select CPU_S3C6410
- select S3C64XX_SETUP_FB_24BPP
- select S3C_DEV_FB
- help
- Machine support for the A&W6410
-
-config MACH_MINI6410
- bool "MINI6410"
- depends on ATAGS && UNUSED_BOARD_FILES
- select CPU_S3C6410
- select S3C64XX_SETUP_FB_24BPP
- select S3C64XX_SETUP_SDHCI
- select S3C_DEV_FB
- select S3C_DEV_HSMMC
- select S3C_DEV_HSMMC1
- select S3C_DEV_NAND
- select S3C_DEV_USB_HOST
- select SAMSUNG_DEV_ADC
- select SAMSUNG_DEV_TS
- help
- Machine support for the FriendlyARM MINI6410
-
-config MACH_REAL6410
- bool "REAL6410"
- depends on ATAGS && UNUSED_BOARD_FILES
- select CPU_S3C6410
- select S3C64XX_SETUP_FB_24BPP
- select S3C64XX_SETUP_SDHCI
- select S3C_DEV_FB
- select S3C_DEV_HSMMC
- select S3C_DEV_HSMMC1
- select S3C_DEV_NAND
- select S3C_DEV_USB_HOST
- select SAMSUNG_DEV_ADC
- select SAMSUNG_DEV_TS
- help
- Machine support for the CoreWind REAL6410
-
-config MACH_SMDK6410
- bool "SMDK6410"
- depends on ATAGS && UNUSED_BOARD_FILES
- select CPU_S3C6410
- select S3C64XX_SETUP_FB_24BPP
- select S3C64XX_SETUP_I2C1
- select S3C64XX_SETUP_IDE
- select S3C64XX_SETUP_KEYPAD
- select S3C64XX_SETUP_SDHCI
- select S3C64XX_SETUP_USB_PHY
- select S3C_DEV_FB
- select S3C_DEV_HSMMC
- select S3C_DEV_HSMMC1
- select S3C_DEV_I2C1
- select S3C_DEV_RTC
- select S3C_DEV_USB_HOST
- select S3C_DEV_USB_HSOTG
- select S3C_DEV_WDT
- select SAMSUNG_DEV_ADC
- select SAMSUNG_DEV_BACKLIGHT
- select SAMSUNG_DEV_IDE
- select SAMSUNG_DEV_KEYPAD
- select SAMSUNG_DEV_PWM
- select SAMSUNG_DEV_TS
- help
- Machine support for the Samsung SMDK6410
-
-# At least some of the SMDK6410s were shipped with the card detect
-# for the MMC/SD slots connected to the same input. This means that
-# either the boards need to be altered to have channel0 to an alternate
-# configuration or that only one slot can be used.
-
-choice
- prompt "SMDK6410 MMC/SD slot setup"
- depends on MACH_SMDK6410
-
-config SMDK6410_SD_CH0
- bool "Use channel 0 only"
- depends on MACH_SMDK6410
- help
- Select CON7 (channel 0) as the MMC/SD slot, as
- at least some SMDK6410 boards come with the
- resistors fitted so that the card detects for
- channels 0 and 1 are the same.
-
-config SMDK6410_SD_CH1
- bool "Use channel 1 only"
- depends on MACH_SMDK6410
- help
- Select CON6 (channel 1) as the MMC/SD slot, as
- at least some SMDK6410 boards come with the
- resistors fitted so that the card detects for
- channels 0 and 1 are the same.
-
-endchoice
-
-config SMDK6410_WM1190_EV1
- bool "Support Wolfson Microelectronics 1190-EV1 PMIC card"
- depends on MACH_SMDK6410
- depends on I2C=y
- select MFD_WM8350_I2C
- select REGULATOR
- select REGULATOR_WM8350
- help
- The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC
- and audio daughtercard for the Samsung SMDK6410 reference
- platform. Enabling this option will build support for this
- module into the kernel. The presence of the module will be
- detected at runtime so the resulting kernel can be used
- with or without the 1190-EV1 fitted.
-
-config SMDK6410_WM1192_EV1
- bool "Support Wolfson Microelectronics 1192-EV1 PMIC card"
- depends on MACH_SMDK6410
- depends on I2C=y
- select MFD_WM831X
- select MFD_WM831X_I2C
- select REGULATOR
- select REGULATOR_WM831X
- help
- The Wolfson Microelectronics 1192-EV1 is a WM831x based PMIC
- daughtercard for the Samsung SMDK6410 reference platform.
- Enabling this option will build support for this module into
- the kernel. The presence of the daughtercard will be
- detected at runtime so the resulting kernel can be used
- with or without the 1192-EV1 fitted.
-
-config MACH_NCP
- bool "NCP"
- depends on ATAGS && UNUSED_BOARD_FILES
- select CPU_S3C6410
- select S3C64XX_SETUP_I2C1
- select S3C_DEV_HSMMC1
- select S3C_DEV_I2C1
- help
- Machine support for the Samsung NCP
-
-config MACH_HMT
- bool "Airgoo HMT"
- depends on ATAGS && UNUSED_BOARD_FILES
- select CPU_S3C6410
- select S3C64XX_SETUP_FB_24BPP
- select S3C_DEV_FB
- select S3C_DEV_NAND
- select S3C_DEV_USB_HOST
- select SAMSUNG_DEV_PWM
- help
- Machine support for the Airgoo HMT
-
-config MACH_SMARTQ
- bool
- select CPU_S3C6410
- select S3C64XX_SETUP_FB_24BPP
- select S3C64XX_SETUP_SDHCI
- select S3C64XX_SETUP_USB_PHY
- select S3C_DEV_FB
- select S3C_DEV_HSMMC
- select S3C_DEV_HSMMC1
- select S3C_DEV_HSMMC2
- select S3C_DEV_HWMON
- select S3C_DEV_RTC
- select S3C_DEV_USB_HOST
- select S3C_DEV_USB_HSOTG
- select SAMSUNG_DEV_ADC
- select SAMSUNG_DEV_PWM
- select SAMSUNG_DEV_TS
- help
- Shared machine support for SmartQ 5/7
-
-config MACH_SMARTQ5
- bool "SmartQ 5"
- depends on ATAGS && UNUSED_BOARD_FILES
- select MACH_SMARTQ
- help
- Machine support for the SmartQ 5
-
-config MACH_SMARTQ7
- bool "SmartQ 7"
- depends on ATAGS && UNUSED_BOARD_FILES
- select MACH_SMARTQ
- help
- Machine support for the SmartQ 7
-
config MACH_WLF_CRAGG_6410
bool "Wolfson Cragganmore 6410"
depends on ATAGS
diff --git a/arch/arm/mach-s3c/Makefile.s3c64xx b/arch/arm/mach-s3c/Makefile.s3c64xx
index 21e919bf2cd1..ba179a22c2af 100644
--- a/arch/arm/mach-s3c/Makefile.s3c64xx
+++ b/arch/arm/mach-s3c/Makefile.s3c64xx
@@ -39,20 +39,7 @@ obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio-s3c64xx.o
obj-$(CONFIG_S3C64XX_SETUP_SPI) += setup-spi-s3c64xx.o
obj-$(CONFIG_S3C64XX_SETUP_USB_PHY) += setup-usb-phy-s3c64xx.o
-obj-$(CONFIG_SAMSUNG_DEV_BACKLIGHT) += dev-backlight-s3c64xx.o
-
# Machine support
-
-obj-$(CONFIG_MACH_ANW6410) += mach-anw6410.o
-obj-$(CONFIG_MACH_HMT) += mach-hmt.o
-obj-$(CONFIG_MACH_MINI6410) += mach-mini6410.o
-obj-$(CONFIG_MACH_NCP) += mach-ncp.o
-obj-$(CONFIG_MACH_REAL6410) += mach-real6410.o
-obj-$(CONFIG_MACH_SMARTQ) += mach-smartq.o
-obj-$(CONFIG_MACH_SMARTQ5) += mach-smartq5.o
-obj-$(CONFIG_MACH_SMARTQ7) += mach-smartq7.o
-obj-$(CONFIG_MACH_SMDK6400) += mach-smdk6400.o
-obj-$(CONFIG_MACH_SMDK6410) += mach-smdk6410.o
obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o mach-crag6410-module.o
endif
diff --git a/arch/arm/mach-s3c/dev-backlight-s3c64xx.c b/arch/arm/mach-s3c/dev-backlight-s3c64xx.c
deleted file mode 100644
index 65488b61e50c..000000000000
diff --git a/arch/arm/mach-s3c/mach-anw6410.c b/arch/arm/mach-s3c/mach-anw6410.c
deleted file mode 100644
index b67eae43e04f..000000000000
diff --git a/arch/arm/mach-s3c/mach-hmt.c b/arch/arm/mach-s3c/mach-hmt.c
deleted file mode 100644
index 49ba16c447aa..000000000000
diff --git a/arch/arm/mach-s3c/mach-mini6410.c b/arch/arm/mach-s3c/mach-mini6410.c
deleted file mode 100644
index 058ae9e8b89f..000000000000
diff --git a/arch/arm/mach-s3c/mach-ncp.c b/arch/arm/mach-s3c/mach-ncp.c
deleted file mode 100644
index 1e65f8bce5c4..000000000000
diff --git a/arch/arm/mach-s3c/mach-real6410.c b/arch/arm/mach-s3c/mach-real6410.c
deleted file mode 100644
index 8c10ebc38a9c..000000000000
diff --git a/arch/arm/mach-s3c/mach-smartq.c b/arch/arm/mach-s3c/mach-smartq.c
deleted file mode 100644
index 5b6e7c2a85ef..000000000000
diff --git a/arch/arm/mach-s3c/mach-smartq.h b/arch/arm/mach-s3c/mach-smartq.h
deleted file mode 100644
index f98132f4f430..000000000000
diff --git a/arch/arm/mach-s3c/mach-smartq5.c b/arch/arm/mach-s3c/mach-smartq5.c
deleted file mode 100644
index ce3fce0bba20..000000000000
diff --git a/arch/arm/mach-s3c/mach-smartq7.c b/arch/arm/mach-s3c/mach-smartq7.c
deleted file mode 100644
index 78ca0e704797..000000000000
diff --git a/arch/arm/mach-s3c/mach-smdk6400.c b/arch/arm/mach-s3c/mach-smdk6400.c
deleted file mode 100644
index a3c1b2a82455..000000000000
diff --git a/arch/arm/mach-s3c/mach-smdk6410.c b/arch/arm/mach-s3c/mach-smdk6410.c
deleted file mode 100644
index e57b2bb61484..000000000000
--
2.29.2
WARNING: multiple messages have this Message-ID (diff)
From: Arnd Bergmann <arnd@kernel.org>
To: linux-arm-kernel@lists.infradead.org,
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: linux-kernel@vger.kernel.org, Ben Dooks <ben-linux@fluff.org>,
Simtec Linux Team <linux@simtec.co.uk>,
Arnd Bergmann <arnd@arndb.de>,
Kwangwoo Lee <kwangwoo.lee@gmail.com>,
Peter Korsgaard <jacmet@sunsite.dk>,
Darius Augulis <augulis.darius@gmail.com>,
Maurus Cuelenaere <mcuelenaere@gmail.com>,
Alim Akhtar <alim.akhtar@samsung.com>,
Heiko Stuebner <heiko@sntech.de>,
Juerg Haefliger <juerg.haefliger@canonical.com>,
Sam Protsenko <semen.protsenko@linaro.org>,
linux-samsung-soc@vger.kernel.org
Subject: [PATCH 03/21] ARM: s3c: remove most s3c64xx board support
Date: Fri, 21 Oct 2022 22:27:36 +0200 [thread overview]
Message-ID: <20221021203329.4143397-3-arnd@kernel.org> (raw)
In-Reply-To: <20221021202254.4142411-1-arnd@kernel.org>
From: Arnd Bergmann <arnd@arndb.de>
All traditional board files except for MACH_WLF_CRAGG_6410 were
marked as unused, so remove them now.
Cc: Kwangwoo Lee <kwangwoo.lee@gmail.com>
Cc: Peter Korsgaard <jacmet@sunsite.dk>
Cc: Darius Augulis <augulis.darius@gmail.com>
Cc: Maurus Cuelenaere <mcuelenaere@gmail.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/mach-s3c/Kconfig.s3c64xx | 206 -------
arch/arm/mach-s3c/Makefile.s3c64xx | 13 -
arch/arm/mach-s3c/dev-backlight-s3c64xx.c | 137 -----
arch/arm/mach-s3c/mach-anw6410.c | 230 -------
arch/arm/mach-s3c/mach-hmt.c | 282 ---------
arch/arm/mach-s3c/mach-mini6410.c | 365 -----------
arch/arm/mach-s3c/mach-ncp.c | 100 ---
arch/arm/mach-s3c/mach-real6410.c | 333 ----------
arch/arm/mach-s3c/mach-smartq.c | 424 -------------
arch/arm/mach-s3c/mach-smartq.h | 16 -
arch/arm/mach-s3c/mach-smartq5.c | 154 -----
arch/arm/mach-s3c/mach-smartq7.c | 170 ------
arch/arm/mach-s3c/mach-smdk6400.c | 90 ---
arch/arm/mach-s3c/mach-smdk6410.c | 706 ----------------------
14 files changed, 3226 deletions(-)
delete mode 100644 arch/arm/mach-s3c/dev-backlight-s3c64xx.c
delete mode 100644 arch/arm/mach-s3c/mach-anw6410.c
delete mode 100644 arch/arm/mach-s3c/mach-hmt.c
delete mode 100644 arch/arm/mach-s3c/mach-mini6410.c
delete mode 100644 arch/arm/mach-s3c/mach-ncp.c
delete mode 100644 arch/arm/mach-s3c/mach-real6410.c
delete mode 100644 arch/arm/mach-s3c/mach-smartq.c
delete mode 100644 arch/arm/mach-s3c/mach-smartq.h
delete mode 100644 arch/arm/mach-s3c/mach-smartq5.c
delete mode 100644 arch/arm/mach-s3c/mach-smartq7.c
delete mode 100644 arch/arm/mach-s3c/mach-smdk6400.c
delete mode 100644 arch/arm/mach-s3c/mach-smdk6410.c
diff --git a/arch/arm/mach-s3c/Kconfig.s3c64xx b/arch/arm/mach-s3c/Kconfig.s3c64xx
index 0c1b91c3ac5f..0da214c43fba 100644
--- a/arch/arm/mach-s3c/Kconfig.s3c64xx
+++ b/arch/arm/mach-s3c/Kconfig.s3c64xx
@@ -54,17 +54,6 @@ config S3C64XX_SETUP_SDHCI
Internal configuration for default SDHCI setup for S3C6400 and
S3C6410 SoCs.
-config S3C64XX_DEV_ONENAND1
- bool
- help
- Compile in platform device definition for OneNAND1 controller
-
-config SAMSUNG_DEV_BACKLIGHT
- bool
- depends on SAMSUNG_DEV_PWM
- help
- Compile in platform device definition LCD backlight with PWM Timer
-
# platform specific device setup
config S3C64XX_SETUP_I2C0
@@ -113,201 +102,6 @@ config S3C64XX_SETUP_USB_PHY
# S36400 Macchine support
-config MACH_SMDK6400
- bool "SMDK6400"
- depends on ATAGS && UNUSED_BOARD_FILES
- select CPU_S3C6400
- select S3C64XX_SETUP_SDHCI
- select S3C_DEV_HSMMC1
- help
- Machine support for the Samsung SMDK6400
-
-# S3C6410 machine support
-
-config MACH_ANW6410
- bool "A&W6410"
- depends on ATAGS && UNUSED_BOARD_FILES
- select CPU_S3C6410
- select S3C64XX_SETUP_FB_24BPP
- select S3C_DEV_FB
- help
- Machine support for the A&W6410
-
-config MACH_MINI6410
- bool "MINI6410"
- depends on ATAGS && UNUSED_BOARD_FILES
- select CPU_S3C6410
- select S3C64XX_SETUP_FB_24BPP
- select S3C64XX_SETUP_SDHCI
- select S3C_DEV_FB
- select S3C_DEV_HSMMC
- select S3C_DEV_HSMMC1
- select S3C_DEV_NAND
- select S3C_DEV_USB_HOST
- select SAMSUNG_DEV_ADC
- select SAMSUNG_DEV_TS
- help
- Machine support for the FriendlyARM MINI6410
-
-config MACH_REAL6410
- bool "REAL6410"
- depends on ATAGS && UNUSED_BOARD_FILES
- select CPU_S3C6410
- select S3C64XX_SETUP_FB_24BPP
- select S3C64XX_SETUP_SDHCI
- select S3C_DEV_FB
- select S3C_DEV_HSMMC
- select S3C_DEV_HSMMC1
- select S3C_DEV_NAND
- select S3C_DEV_USB_HOST
- select SAMSUNG_DEV_ADC
- select SAMSUNG_DEV_TS
- help
- Machine support for the CoreWind REAL6410
-
-config MACH_SMDK6410
- bool "SMDK6410"
- depends on ATAGS && UNUSED_BOARD_FILES
- select CPU_S3C6410
- select S3C64XX_SETUP_FB_24BPP
- select S3C64XX_SETUP_I2C1
- select S3C64XX_SETUP_IDE
- select S3C64XX_SETUP_KEYPAD
- select S3C64XX_SETUP_SDHCI
- select S3C64XX_SETUP_USB_PHY
- select S3C_DEV_FB
- select S3C_DEV_HSMMC
- select S3C_DEV_HSMMC1
- select S3C_DEV_I2C1
- select S3C_DEV_RTC
- select S3C_DEV_USB_HOST
- select S3C_DEV_USB_HSOTG
- select S3C_DEV_WDT
- select SAMSUNG_DEV_ADC
- select SAMSUNG_DEV_BACKLIGHT
- select SAMSUNG_DEV_IDE
- select SAMSUNG_DEV_KEYPAD
- select SAMSUNG_DEV_PWM
- select SAMSUNG_DEV_TS
- help
- Machine support for the Samsung SMDK6410
-
-# At least some of the SMDK6410s were shipped with the card detect
-# for the MMC/SD slots connected to the same input. This means that
-# either the boards need to be altered to have channel0 to an alternate
-# configuration or that only one slot can be used.
-
-choice
- prompt "SMDK6410 MMC/SD slot setup"
- depends on MACH_SMDK6410
-
-config SMDK6410_SD_CH0
- bool "Use channel 0 only"
- depends on MACH_SMDK6410
- help
- Select CON7 (channel 0) as the MMC/SD slot, as
- at least some SMDK6410 boards come with the
- resistors fitted so that the card detects for
- channels 0 and 1 are the same.
-
-config SMDK6410_SD_CH1
- bool "Use channel 1 only"
- depends on MACH_SMDK6410
- help
- Select CON6 (channel 1) as the MMC/SD slot, as
- at least some SMDK6410 boards come with the
- resistors fitted so that the card detects for
- channels 0 and 1 are the same.
-
-endchoice
-
-config SMDK6410_WM1190_EV1
- bool "Support Wolfson Microelectronics 1190-EV1 PMIC card"
- depends on MACH_SMDK6410
- depends on I2C=y
- select MFD_WM8350_I2C
- select REGULATOR
- select REGULATOR_WM8350
- help
- The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC
- and audio daughtercard for the Samsung SMDK6410 reference
- platform. Enabling this option will build support for this
- module into the kernel. The presence of the module will be
- detected at runtime so the resulting kernel can be used
- with or without the 1190-EV1 fitted.
-
-config SMDK6410_WM1192_EV1
- bool "Support Wolfson Microelectronics 1192-EV1 PMIC card"
- depends on MACH_SMDK6410
- depends on I2C=y
- select MFD_WM831X
- select MFD_WM831X_I2C
- select REGULATOR
- select REGULATOR_WM831X
- help
- The Wolfson Microelectronics 1192-EV1 is a WM831x based PMIC
- daughtercard for the Samsung SMDK6410 reference platform.
- Enabling this option will build support for this module into
- the kernel. The presence of the daughtercard will be
- detected at runtime so the resulting kernel can be used
- with or without the 1192-EV1 fitted.
-
-config MACH_NCP
- bool "NCP"
- depends on ATAGS && UNUSED_BOARD_FILES
- select CPU_S3C6410
- select S3C64XX_SETUP_I2C1
- select S3C_DEV_HSMMC1
- select S3C_DEV_I2C1
- help
- Machine support for the Samsung NCP
-
-config MACH_HMT
- bool "Airgoo HMT"
- depends on ATAGS && UNUSED_BOARD_FILES
- select CPU_S3C6410
- select S3C64XX_SETUP_FB_24BPP
- select S3C_DEV_FB
- select S3C_DEV_NAND
- select S3C_DEV_USB_HOST
- select SAMSUNG_DEV_PWM
- help
- Machine support for the Airgoo HMT
-
-config MACH_SMARTQ
- bool
- select CPU_S3C6410
- select S3C64XX_SETUP_FB_24BPP
- select S3C64XX_SETUP_SDHCI
- select S3C64XX_SETUP_USB_PHY
- select S3C_DEV_FB
- select S3C_DEV_HSMMC
- select S3C_DEV_HSMMC1
- select S3C_DEV_HSMMC2
- select S3C_DEV_HWMON
- select S3C_DEV_RTC
- select S3C_DEV_USB_HOST
- select S3C_DEV_USB_HSOTG
- select SAMSUNG_DEV_ADC
- select SAMSUNG_DEV_PWM
- select SAMSUNG_DEV_TS
- help
- Shared machine support for SmartQ 5/7
-
-config MACH_SMARTQ5
- bool "SmartQ 5"
- depends on ATAGS && UNUSED_BOARD_FILES
- select MACH_SMARTQ
- help
- Machine support for the SmartQ 5
-
-config MACH_SMARTQ7
- bool "SmartQ 7"
- depends on ATAGS && UNUSED_BOARD_FILES
- select MACH_SMARTQ
- help
- Machine support for the SmartQ 7
-
config MACH_WLF_CRAGG_6410
bool "Wolfson Cragganmore 6410"
depends on ATAGS
diff --git a/arch/arm/mach-s3c/Makefile.s3c64xx b/arch/arm/mach-s3c/Makefile.s3c64xx
index 21e919bf2cd1..ba179a22c2af 100644
--- a/arch/arm/mach-s3c/Makefile.s3c64xx
+++ b/arch/arm/mach-s3c/Makefile.s3c64xx
@@ -39,20 +39,7 @@ obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio-s3c64xx.o
obj-$(CONFIG_S3C64XX_SETUP_SPI) += setup-spi-s3c64xx.o
obj-$(CONFIG_S3C64XX_SETUP_USB_PHY) += setup-usb-phy-s3c64xx.o
-obj-$(CONFIG_SAMSUNG_DEV_BACKLIGHT) += dev-backlight-s3c64xx.o
-
# Machine support
-
-obj-$(CONFIG_MACH_ANW6410) += mach-anw6410.o
-obj-$(CONFIG_MACH_HMT) += mach-hmt.o
-obj-$(CONFIG_MACH_MINI6410) += mach-mini6410.o
-obj-$(CONFIG_MACH_NCP) += mach-ncp.o
-obj-$(CONFIG_MACH_REAL6410) += mach-real6410.o
-obj-$(CONFIG_MACH_SMARTQ) += mach-smartq.o
-obj-$(CONFIG_MACH_SMARTQ5) += mach-smartq5.o
-obj-$(CONFIG_MACH_SMARTQ7) += mach-smartq7.o
-obj-$(CONFIG_MACH_SMDK6400) += mach-smdk6400.o
-obj-$(CONFIG_MACH_SMDK6410) += mach-smdk6410.o
obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o mach-crag6410-module.o
endif
diff --git a/arch/arm/mach-s3c/dev-backlight-s3c64xx.c b/arch/arm/mach-s3c/dev-backlight-s3c64xx.c
deleted file mode 100644
index 65488b61e50c..000000000000
diff --git a/arch/arm/mach-s3c/mach-anw6410.c b/arch/arm/mach-s3c/mach-anw6410.c
deleted file mode 100644
index b67eae43e04f..000000000000
diff --git a/arch/arm/mach-s3c/mach-hmt.c b/arch/arm/mach-s3c/mach-hmt.c
deleted file mode 100644
index 49ba16c447aa..000000000000
diff --git a/arch/arm/mach-s3c/mach-mini6410.c b/arch/arm/mach-s3c/mach-mini6410.c
deleted file mode 100644
index 058ae9e8b89f..000000000000
diff --git a/arch/arm/mach-s3c/mach-ncp.c b/arch/arm/mach-s3c/mach-ncp.c
deleted file mode 100644
index 1e65f8bce5c4..000000000000
diff --git a/arch/arm/mach-s3c/mach-real6410.c b/arch/arm/mach-s3c/mach-real6410.c
deleted file mode 100644
index 8c10ebc38a9c..000000000000
diff --git a/arch/arm/mach-s3c/mach-smartq.c b/arch/arm/mach-s3c/mach-smartq.c
deleted file mode 100644
index 5b6e7c2a85ef..000000000000
diff --git a/arch/arm/mach-s3c/mach-smartq.h b/arch/arm/mach-s3c/mach-smartq.h
deleted file mode 100644
index f98132f4f430..000000000000
diff --git a/arch/arm/mach-s3c/mach-smartq5.c b/arch/arm/mach-s3c/mach-smartq5.c
deleted file mode 100644
index ce3fce0bba20..000000000000
diff --git a/arch/arm/mach-s3c/mach-smartq7.c b/arch/arm/mach-s3c/mach-smartq7.c
deleted file mode 100644
index 78ca0e704797..000000000000
diff --git a/arch/arm/mach-s3c/mach-smdk6400.c b/arch/arm/mach-s3c/mach-smdk6400.c
deleted file mode 100644
index a3c1b2a82455..000000000000
diff --git a/arch/arm/mach-s3c/mach-smdk6410.c b/arch/arm/mach-s3c/mach-smdk6410.c
deleted file mode 100644
index e57b2bb61484..000000000000
--
2.29.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-10-21 20:38 UTC|newest]
Thread overview: 196+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-21 20:22 [PATCH 00/21] ARM: s3c: clean out obsolete platforms Arnd Bergmann
2022-10-21 20:22 ` Arnd Bergmann
2022-10-21 20:22 ` Arnd Bergmann
2022-10-21 20:22 ` Arnd Bergmann
2022-10-21 20:27 ` [PATCH 01/21] ARM: s3c: remove all s3c24xx support Arnd Bergmann
2022-10-21 20:27 ` Arnd Bergmann
2022-10-22 20:56 ` Heiko Stübner
2022-10-22 20:56 ` Heiko Stübner
2022-10-24 14:27 ` Arnd Bergmann
2022-10-24 14:27 ` Arnd Bergmann
2022-10-24 15:45 ` Heiko Stübner
2022-10-24 15:45 ` Heiko Stübner
2022-10-24 12:25 ` Krzysztof Kozlowski
2022-10-24 12:25 ` Krzysztof Kozlowski
2022-10-27 23:10 ` Stephen Boyd
2022-10-27 23:10 ` Stephen Boyd
2022-10-21 20:27 ` [PATCH 02/21] ARM: s3c: remove s3c24xx specific hacks Arnd Bergmann
2022-10-21 20:27 ` Arnd Bergmann
2022-10-21 20:27 ` Arnd Bergmann
2022-10-21 22:33 ` Wolfram Sang
2022-10-21 22:33 ` Wolfram Sang
2022-10-21 22:33 ` Wolfram Sang
2022-10-22 11:24 ` Greg Kroah-Hartman
2022-10-22 11:24 ` Greg Kroah-Hartman
2022-10-22 11:24 ` Greg Kroah-Hartman
2022-10-22 14:02 ` Linus Walleij
2022-10-22 14:02 ` Linus Walleij
2022-10-22 14:02 ` Linus Walleij
2022-10-23 11:00 ` Jonathan Cameron
2022-10-23 11:00 ` Jonathan Cameron
2022-10-23 11:00 ` Jonathan Cameron
2022-10-23 18:08 ` Daniel Lezcano
2022-10-23 18:08 ` Daniel Lezcano
2022-10-23 18:08 ` Daniel Lezcano
2022-10-24 7:55 ` Miquel Raynal
2022-10-24 7:55 ` Miquel Raynal
2022-10-24 7:55 ` Miquel Raynal
2022-10-24 12:26 ` Krzysztof Kozlowski
2022-10-24 12:26 ` Krzysztof Kozlowski
2022-10-24 12:26 ` Krzysztof Kozlowski
2022-10-24 16:53 ` Ulf Hansson
2022-10-24 16:53 ` Ulf Hansson
2022-10-24 16:53 ` Ulf Hansson
2022-10-27 23:10 ` Stephen Boyd
2022-10-27 23:10 ` Stephen Boyd
2022-10-27 23:10 ` Stephen Boyd
2022-10-21 20:27 ` Arnd Bergmann [this message]
2022-10-21 20:27 ` [PATCH 03/21] ARM: s3c: remove most s3c64xx board support Arnd Bergmann
2022-10-24 12:26 ` Krzysztof Kozlowski
2022-10-24 12:26 ` Krzysztof Kozlowski
2022-10-21 20:27 ` [PATCH 04/21] ARM: s3c: remove adc.c Arnd Bergmann
2022-10-21 20:27 ` Arnd Bergmann
2022-10-24 11:37 ` Mark Brown
2022-10-24 11:37 ` Mark Brown
2022-10-24 12:27 ` Krzysztof Kozlowski
2022-10-24 12:27 ` Krzysztof Kozlowski
2022-10-21 20:27 ` [PATCH 05/21] ARM: s3c: simplify platform code Arnd Bergmann
2022-10-21 20:27 ` Arnd Bergmann
2022-10-24 11:41 ` Mark Brown
2022-10-24 11:41 ` Mark Brown
2022-10-24 12:29 ` Krzysztof Kozlowski
2022-10-24 12:29 ` Krzysztof Kozlowski
2022-10-24 13:32 ` Arnd Bergmann
2022-10-24 13:32 ` Arnd Bergmann
2022-10-24 14:13 ` Krzysztof Kozlowski
2022-10-24 14:13 ` Krzysztof Kozlowski
2022-10-21 20:27 ` [PATCH 06/21] ARM: s3c: remove s3c6400 support Arnd Bergmann
2022-10-21 20:27 ` Arnd Bergmann
2022-10-24 12:30 ` Krzysztof Kozlowski
2022-10-24 12:30 ` Krzysztof Kozlowski
2022-10-21 20:27 ` [PATCH 07/21] power: remove s3c adc battery driver Arnd Bergmann
2022-10-21 20:27 ` Arnd Bergmann
2022-10-24 7:28 ` Lee Jones
2022-10-24 7:28 ` Lee Jones
2022-10-24 7:42 ` Arnd Bergmann
2022-10-24 7:42 ` Arnd Bergmann
2022-10-24 7:57 ` Lee Jones
2022-10-24 7:57 ` Lee Jones
2022-10-24 12:31 ` Krzysztof Kozlowski
2022-10-24 12:31 ` Krzysztof Kozlowski
2022-10-28 14:18 ` Sebastian Reichel
2022-10-28 14:18 ` Sebastian Reichel
2022-10-21 20:27 ` [PATCH 08/21] hwmon: remove s3c driver Arnd Bergmann
2022-10-21 20:27 ` Arnd Bergmann
2022-10-22 4:02 ` Guenter Roeck
2022-10-22 4:02 ` Guenter Roeck
2022-10-22 8:36 ` Arnd Bergmann
2022-10-22 8:36 ` Arnd Bergmann
2022-10-24 12:31 ` Krzysztof Kozlowski
2022-10-24 12:31 ` Krzysztof Kozlowski
2022-10-21 20:27 ` [PATCH 09/21] pata: remove samsung_cf driver Arnd Bergmann
2022-10-21 20:27 ` Arnd Bergmann
2022-10-23 14:35 ` Sergey Shtylyov
2022-10-23 14:35 ` Sergey Shtylyov
2022-10-23 22:41 ` Damien Le Moal
2022-10-23 22:41 ` Damien Le Moal
2022-10-23 22:43 ` Damien Le Moal
2022-10-23 22:43 ` Damien Le Moal
2022-10-24 14:24 ` Arnd Bergmann
2022-10-24 14:24 ` Arnd Bergmann
2022-10-24 12:34 ` Krzysztof Kozlowski
2022-10-24 12:34 ` Krzysztof Kozlowski
2022-10-21 20:27 ` [PATCH 10/21] mmc: remove s3cmci driver Arnd Bergmann
2022-10-21 20:27 ` Arnd Bergmann
2022-10-24 12:35 ` Krzysztof Kozlowski
2022-10-24 12:35 ` Krzysztof Kozlowski
2022-10-24 16:52 ` Ulf Hansson
2022-10-24 16:52 ` Ulf Hansson
2022-10-21 20:27 ` [PATCH 11/21] clk: remove s3c24xx driver Arnd Bergmann
2022-10-21 20:27 ` Arnd Bergmann
2022-10-22 11:50 ` Chanwoo Choi
2022-10-22 11:50 ` Chanwoo Choi
2022-10-24 12:37 ` Krzysztof Kozlowski
2022-10-24 12:37 ` Krzysztof Kozlowski
2022-10-27 23:11 ` Stephen Boyd
2022-10-27 23:11 ` Stephen Boyd
2022-10-21 20:27 ` [PATCH 12/21] leds: " Arnd Bergmann
2022-10-21 20:27 ` Arnd Bergmann
2022-10-22 10:04 ` Pavel Machek
2022-10-22 10:04 ` Pavel Machek
2022-10-24 12:37 ` Krzysztof Kozlowski
2022-10-24 12:37 ` Krzysztof Kozlowski
2022-10-21 20:27 ` [PATCH 13/21] usb: gadget: remove s3c24xx drivers Arnd Bergmann
2022-10-21 20:27 ` Arnd Bergmann
2022-10-24 12:39 ` Krzysztof Kozlowski
2022-10-24 12:39 ` Krzysztof Kozlowski
2022-10-21 20:27 ` [PATCH 14/21] dmaengine: remove s3c24xx driver Arnd Bergmann
2022-10-21 20:27 ` Arnd Bergmann
2022-10-24 12:40 ` Krzysztof Kozlowski
2022-10-24 12:40 ` Krzysztof Kozlowski
2022-11-04 14:14 ` Vinod Koul
2022-11-04 14:14 ` Vinod Koul
2022-11-18 21:54 ` [PATCH] ARM: s3c: Fix a build error after the s3c24xx dma driver was removed Uwe Kleine-König
2022-11-20 10:31 ` Krzysztof Kozlowski
2022-11-20 11:22 ` Krzysztof Kozlowski
2022-11-25 8:51 ` Uwe Kleine-König
2022-11-25 8:52 ` Krzysztof Kozlowski
2022-12-02 11:20 ` Regression in dmaengine/next " Uwe Kleine-König
2022-12-02 11:42 ` Vinod Koul
2022-12-05 8:56 ` Uwe Kleine-König
2022-10-21 20:27 ` [PATCH 15/21] cpufreq: remove s3c24xx drivers Arnd Bergmann
2022-10-21 20:27 ` Arnd Bergmann
2022-10-24 12:40 ` Krzysztof Kozlowski
2022-10-24 12:40 ` Krzysztof Kozlowski
2022-10-25 5:19 ` Viresh Kumar
2022-10-25 5:19 ` Viresh Kumar
2022-10-21 20:27 ` [PATCH 16/21] fbdev: remove s3c2410 framebuffer Arnd Bergmann
2022-10-21 20:27 ` Arnd Bergmann
2022-10-21 20:27 ` Arnd Bergmann
2022-10-24 12:49 ` Krzysztof Kozlowski
2022-10-24 12:49 ` Krzysztof Kozlowski
2022-10-24 12:49 ` Krzysztof Kozlowski
2022-10-21 20:27 ` [PATCH 17/21] input: remove s3c24xx touchscreen driver Arnd Bergmann
2022-10-21 20:27 ` Arnd Bergmann
2022-10-24 11:57 ` Dmitry Torokhov
2022-10-24 11:57 ` Dmitry Torokhov
2022-10-24 12:50 ` Krzysztof Kozlowski
2022-10-24 12:50 ` Krzysztof Kozlowski
2022-10-24 13:02 ` Arnd Bergmann
2022-10-24 13:02 ` Arnd Bergmann
2022-10-21 20:27 ` [PATCH 18/21] pinctrl: remove s3c24xx driver Arnd Bergmann
2022-10-21 20:27 ` Arnd Bergmann
2022-10-21 21:25 ` Linus Walleij
2022-10-21 21:25 ` Linus Walleij
2022-10-24 12:51 ` Krzysztof Kozlowski
2022-10-24 12:51 ` Krzysztof Kozlowski
2022-10-21 20:27 ` [PATCH 19/21] spi: " Arnd Bergmann
2022-10-21 20:27 ` Arnd Bergmann
2022-10-24 12:52 ` Krzysztof Kozlowski
2022-10-24 12:52 ` Krzysztof Kozlowski
2022-10-21 20:27 ` [PATCH 20/21] soc: s3c: remove pm-debug hack Arnd Bergmann
2022-10-21 20:27 ` Arnd Bergmann
2022-10-24 12:52 ` Krzysztof Kozlowski
2022-10-24 12:52 ` Krzysztof Kozlowski
2022-10-21 20:27 ` [PATCH 21/21] ASoC: samsung: remove unused drivers Arnd Bergmann
2022-10-21 20:27 ` Arnd Bergmann
2022-10-21 20:27 ` Arnd Bergmann
2022-10-24 12:53 ` Krzysztof Kozlowski
2022-10-24 12:53 ` Krzysztof Kozlowski
2022-10-24 12:53 ` Krzysztof Kozlowski
2022-10-22 15:18 ` [PATCH 00/21] ARM: s3c: clean out obsolete platforms Krzysztof Kozlowski
2022-10-22 15:18 ` Krzysztof Kozlowski
2022-10-22 15:18 ` Krzysztof Kozlowski
2022-10-22 15:18 ` Krzysztof Kozlowski
2022-10-22 19:48 ` Arnd Bergmann
2022-10-22 19:48 ` Arnd Bergmann
2022-10-22 19:48 ` Arnd Bergmann
2022-10-22 19:48 ` Arnd Bergmann
2022-10-24 13:00 ` Rob Herring
2022-10-24 13:00 ` Rob Herring
2022-10-24 13:00 ` Rob Herring
2022-10-24 13:00 ` Rob Herring
2022-10-24 13:18 ` Arnd Bergmann
2022-10-24 13:18 ` Arnd Bergmann
2022-10-24 13:18 ` Arnd Bergmann
2022-10-24 13:18 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221021203329.4143397-3-arnd@kernel.org \
--to=arnd@kernel.org \
--cc=alim.akhtar@samsung.com \
--cc=arnd@arndb.de \
--cc=augulis.darius@gmail.com \
--cc=ben-linux@fluff.org \
--cc=heiko@sntech.de \
--cc=jacmet@sunsite.dk \
--cc=juerg.haefliger@canonical.com \
--cc=krzysztof.kozlowski@linaro.org \
--cc=kwangwoo.lee@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linux@simtec.co.uk \
--cc=mcuelenaere@gmail.com \
--cc=semen.protsenko@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.