From: Rob Herring <robh@kernel.org>
To: Sebastian Reichel <sebastian.reichel@collabora.com>
Cc: Heiko Stuebner <heiko@sntech.de>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Lee Jones <lee@kernel.org>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
Linus Walleij <linus.walleij@linaro.org>,
Mark Brown <broonie@kernel.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
Alessandro Zummo <a.zummo@towertech.it>,
linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, kernel@collabora.com
Subject: Re: [PATCHv4 08/13] dt-bindings: mfd: add rk806 binding
Date: Fri, 21 Oct 2022 17:19:39 -0500 [thread overview]
Message-ID: <20221021221939.GA523931-robh@kernel.org> (raw)
In-Reply-To: <20221020204251.108565-9-sebastian.reichel@collabora.com>
On Thu, Oct 20, 2022 at 10:42:46PM +0200, Sebastian Reichel wrote:
> Add DT binding document for Rockchip's RK806 PMIC.
>
> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
> ---
> .../bindings/mfd/rockchip,rk806.yaml | 405 ++++++++++++++++++
> 1 file changed, 405 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mfd/rockchip,rk806.yaml
>
> diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk806.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk806.yaml
> new file mode 100644
> index 000000000000..4e907dd1f7a4
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/rockchip,rk806.yaml
> @@ -0,0 +1,405 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/rockchip,rk806.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: RK806 Power Management Integrated Circuit
> +
> +maintainers:
> + - Sebastian Reichel <sebastian.reichel@collabora.com>
> +
> +description: |
Don't need '|' if no formatting to preserve.
> + Rockchip RK806 series PMIC. This device consists of an spi or
> + i2c controlled MFD that includes multiple switchable regulators.
> +
> +properties:
> + compatible:
> + enum:
> + - rockchip,rk806
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + gpio-controller: true
> +
> + '#gpio-cells':
> + const: 2
> +
> + vcc1-supply:
> + description:
> + The input supply for dcdc-reg1.
> +
> + vcc2-supply:
> + description:
> + The input supply for dcdc-reg2.
> +
> + vcc3-supply:
> + description:
> + The input supply for dcdc-reg3.
> +
> + vcc4-supply:
> + description:
> + The input supply for dcdc-reg4.
> +
> + vcc5-supply:
> + description:
> + The input supply for dcdc-reg5.
> +
> + vcc6-supply:
> + description:
> + The input supply for dcdc-reg6.
> +
> + vcc7-supply:
> + description:
> + The input supply for dcdc-reg7.
> +
> + vcc8-supply:
> + description:
> + The input supply for dcdc-reg8.
> +
> + vcc9-supply:
> + description:
> + The input supply for dcdc-reg9.
> +
> + vcc10-supply:
> + description:
> + The input supply for dcdc-reg10.
> +
> + vcc11-supply:
> + description:
> + The input supply for pldo-reg1, pldo-reg2 and pldo-reg3.
> +
> + vcc12-supply:
> + description:
> + The input supply for pldo-reg4 and pldo-reg5.
> +
> + vcc13-supply:
> + description:
> + The input supply for nldo-reg1, nldo-reg2 and nldo-reg3.
> +
> + vcc14-supply:
> + description:
> + The input supply for nldo-reg4 and nldo-reg5.
> +
> + vcca-supply:
> + description:
> + The input supply for pldo-reg6.
> +
> + regulators:
> + type: object
> + patternProperties:
> + "^(dcdc-reg([1-9]|10)|pldo-reg[1-6]|nldo-reg[1-5])$":
> + type: object
> + $ref: /schemas/regulator/regulator.yaml#
> + unevaluatedProperties: false
> + additionalProperties: false
In the indented cases, this is a bit easier to read if placed before
patternProperties.
> +
> +patternProperties:
> + '-pins$':
> + type: object
additionalProperties: false
(or unevaluatedProperties if other properties besides function and pins
apply.)
> + $ref: /schemas/pinctrl/pinmux-node.yaml
> +
> + properties:
> + function:
> + enum: [pin_fun0, pin_fun1, pin_fun2, pin_fun3, pin_fun4, pin_fun5]
> +
> + pins:
> + $ref: "/schemas/types.yaml#/definitions/string"
Can drop quotes.
> + enum: [gpio_pwrctrl1, gpio_pwrctrl2, gpio_pwrctrl3]
> +
> +allOf:
> + - $ref: /schemas/spi/spi-peripheral-props.yaml
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/pinctrl/rockchip.h>
> + #include <dt-bindings/interrupt-controller/irq.h>
> + #include <dt-bindings/gpio/gpio.h>
> + spi {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + pmic@0 {
> + compatible = "rockchip,rk806";
> + reg = <0x0>;
> +
> + interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
> +
> + vcc1-supply = <&vcc5v0_sys>;
> + vcc2-supply = <&vcc5v0_sys>;
> + vcc3-supply = <&vcc5v0_sys>;
> + vcc4-supply = <&vcc5v0_sys>;
> + vcc5-supply = <&vcc5v0_sys>;
> + vcc6-supply = <&vcc5v0_sys>;
> + vcc7-supply = <&vcc5v0_sys>;
> + vcc8-supply = <&vcc5v0_sys>;
> + vcc9-supply = <&vcc5v0_sys>;
> + vcc10-supply = <&vcc5v0_sys>;
> + vcc11-supply = <&vcc_2v0_pldo_s3>;
> + vcc12-supply = <&vcc5v0_sys>;
> + vcc13-supply = <&vcc5v0_sys>;
> + vcc14-supply = <&vcc_1v1_nldo_s3>;
> + vcca-supply = <&vcc5v0_sys>;
> +
> + regulators {
> + vdd_gpu_s0: dcdc-reg1 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <550000>;
> + regulator-max-microvolt = <950000>;
> + regulator-ramp-delay = <12500>;
> + regulator-name = "vdd_gpu_s0";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vdd_npu_s0: dcdc-reg2 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <550000>;
> + regulator-max-microvolt = <950000>;
> + regulator-ramp-delay = <12500>;
> + regulator-name = "vdd_npu_s0";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vdd_log_s0: dcdc-reg3 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <750000>;
> + regulator-max-microvolt = <750000>;
> + regulator-ramp-delay = <12500>;
> + regulator-name = "vdd_log_s0";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <750000>;
> + };
> + };
> +
> + vdd_vdenc_s0: dcdc-reg4 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <550000>;
> + regulator-max-microvolt = <950000>;
> + regulator-ramp-delay = <12500>;
> + regulator-name = "vdd_vdenc_s0";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vdd_gpu_mem_s0: dcdc-reg5 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <675000>;
> + regulator-max-microvolt = <950000>;
> + regulator-ramp-delay = <12500>;
> + regulator-name = "vdd_gpu_mem_s0";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vdd_npu_mem_s0: dcdc-reg6 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <675000>;
> + regulator-max-microvolt = <950000>;
> + regulator-ramp-delay = <12500>;
> + regulator-name = "vdd_npu_mem_s0";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc_2v0_pldo_s3: dcdc-reg7 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <2000000>;
> + regulator-max-microvolt = <2000000>;
> + regulator-ramp-delay = <12500>;
> + regulator-name = "vdd_2v0_pldo_s3";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <2000000>;
> + };
> + };
> +
> + vdd_vdenc_mem_s0: dcdc-reg8 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <675000>;
> + regulator-max-microvolt = <950000>;
> + regulator-ramp-delay = <12500>;
> + regulator-name = "vdd_vdenc_mem_s0";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vdd2_ddr_s3: dcdc-reg9 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-name = "vdd2_ddr_s3";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + };
> + };
> +
> + vcc_1v1_nldo_s3: dcdc-reg10 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1100000>;
> + regulator-max-microvolt = <1100000>;
> + regulator-ramp-delay = <12500>;
> + regulator-name = "vcc_1v1_nldo_s3";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1100000>;
> + };
> + };
> +
> + avcc_1v8_s0: pldo-reg1 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-ramp-delay = <12500>;
> + regulator-name = "avcc_1v8_s0";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vdd1_1v8_ddr_s3: pldo-reg2 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-ramp-delay = <12500>;
> + regulator-name = "vdd1_1v8_ddr_s3";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1800000>;
> + };
> + };
> +
> + vcc_1v8_s3: pldo-reg3 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-ramp-delay = <12500>;
> + regulator-name = "vcc_1v8_s3";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1800000>;
> + };
> + };
> +
> + vcc_3v3_s0: pldo-reg4 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-ramp-delay = <12500>;
> + regulator-name = "vcc_3v3_s0";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vccio_sd_s0: pldo-reg5 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-ramp-delay = <12500>;
> + regulator-name = "vccio_sd_s0";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + master_pldo6_s3: pldo-reg6 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-name = "master_pldo6_s3";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1800000>;
> + };
> + };
> +
> + vdd_0v75_s3: nldo-reg1 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <750000>;
> + regulator-max-microvolt = <750000>;
> + regulator-ramp-delay = <12500>;
> + regulator-name = "vdd_0v75_s3";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <750000>;
> + };
> + };
> +
> + vdd2l_0v9_ddr_s3: nldo-reg2 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <900000>;
> + regulator-name = "vdd2l_0v9_ddr_s3";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <900000>;
> + };
> + };
> +
> + master_nldo3: nldo-reg3 {
> + regulator-name = "master_nldo3";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + avdd_0v75_s0: nldo-reg4 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <750000>;
> + regulator-max-microvolt = <750000>;
> + regulator-name = "avdd_0v75_s0";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vdd_0v85_s0: nldo-reg5 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <850000>;
> + regulator-max-microvolt = <850000>;
> + regulator-name = "vdd_0v85_s0";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> + };
> + };
> + };
> --
> 2.35.1
>
>
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
WARNING: multiple messages have this Message-ID (diff)
From: Rob Herring <robh@kernel.org>
To: Sebastian Reichel <sebastian.reichel@collabora.com>
Cc: Heiko Stuebner <heiko@sntech.de>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Lee Jones <lee@kernel.org>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
Linus Walleij <linus.walleij@linaro.org>,
Mark Brown <broonie@kernel.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
Alessandro Zummo <a.zummo@towertech.it>,
linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, kernel@collabora.com
Subject: Re: [PATCHv4 08/13] dt-bindings: mfd: add rk806 binding
Date: Fri, 21 Oct 2022 17:19:39 -0500 [thread overview]
Message-ID: <20221021221939.GA523931-robh@kernel.org> (raw)
In-Reply-To: <20221020204251.108565-9-sebastian.reichel@collabora.com>
On Thu, Oct 20, 2022 at 10:42:46PM +0200, Sebastian Reichel wrote:
> Add DT binding document for Rockchip's RK806 PMIC.
>
> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
> ---
> .../bindings/mfd/rockchip,rk806.yaml | 405 ++++++++++++++++++
> 1 file changed, 405 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mfd/rockchip,rk806.yaml
>
> diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk806.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk806.yaml
> new file mode 100644
> index 000000000000..4e907dd1f7a4
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/rockchip,rk806.yaml
> @@ -0,0 +1,405 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/rockchip,rk806.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: RK806 Power Management Integrated Circuit
> +
> +maintainers:
> + - Sebastian Reichel <sebastian.reichel@collabora.com>
> +
> +description: |
Don't need '|' if no formatting to preserve.
> + Rockchip RK806 series PMIC. This device consists of an spi or
> + i2c controlled MFD that includes multiple switchable regulators.
> +
> +properties:
> + compatible:
> + enum:
> + - rockchip,rk806
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + gpio-controller: true
> +
> + '#gpio-cells':
> + const: 2
> +
> + vcc1-supply:
> + description:
> + The input supply for dcdc-reg1.
> +
> + vcc2-supply:
> + description:
> + The input supply for dcdc-reg2.
> +
> + vcc3-supply:
> + description:
> + The input supply for dcdc-reg3.
> +
> + vcc4-supply:
> + description:
> + The input supply for dcdc-reg4.
> +
> + vcc5-supply:
> + description:
> + The input supply for dcdc-reg5.
> +
> + vcc6-supply:
> + description:
> + The input supply for dcdc-reg6.
> +
> + vcc7-supply:
> + description:
> + The input supply for dcdc-reg7.
> +
> + vcc8-supply:
> + description:
> + The input supply for dcdc-reg8.
> +
> + vcc9-supply:
> + description:
> + The input supply for dcdc-reg9.
> +
> + vcc10-supply:
> + description:
> + The input supply for dcdc-reg10.
> +
> + vcc11-supply:
> + description:
> + The input supply for pldo-reg1, pldo-reg2 and pldo-reg3.
> +
> + vcc12-supply:
> + description:
> + The input supply for pldo-reg4 and pldo-reg5.
> +
> + vcc13-supply:
> + description:
> + The input supply for nldo-reg1, nldo-reg2 and nldo-reg3.
> +
> + vcc14-supply:
> + description:
> + The input supply for nldo-reg4 and nldo-reg5.
> +
> + vcca-supply:
> + description:
> + The input supply for pldo-reg6.
> +
> + regulators:
> + type: object
> + patternProperties:
> + "^(dcdc-reg([1-9]|10)|pldo-reg[1-6]|nldo-reg[1-5])$":
> + type: object
> + $ref: /schemas/regulator/regulator.yaml#
> + unevaluatedProperties: false
> + additionalProperties: false
In the indented cases, this is a bit easier to read if placed before
patternProperties.
> +
> +patternProperties:
> + '-pins$':
> + type: object
additionalProperties: false
(or unevaluatedProperties if other properties besides function and pins
apply.)
> + $ref: /schemas/pinctrl/pinmux-node.yaml
> +
> + properties:
> + function:
> + enum: [pin_fun0, pin_fun1, pin_fun2, pin_fun3, pin_fun4, pin_fun5]
> +
> + pins:
> + $ref: "/schemas/types.yaml#/definitions/string"
Can drop quotes.
> + enum: [gpio_pwrctrl1, gpio_pwrctrl2, gpio_pwrctrl3]
> +
> +allOf:
> + - $ref: /schemas/spi/spi-peripheral-props.yaml
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/pinctrl/rockchip.h>
> + #include <dt-bindings/interrupt-controller/irq.h>
> + #include <dt-bindings/gpio/gpio.h>
> + spi {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + pmic@0 {
> + compatible = "rockchip,rk806";
> + reg = <0x0>;
> +
> + interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
> +
> + vcc1-supply = <&vcc5v0_sys>;
> + vcc2-supply = <&vcc5v0_sys>;
> + vcc3-supply = <&vcc5v0_sys>;
> + vcc4-supply = <&vcc5v0_sys>;
> + vcc5-supply = <&vcc5v0_sys>;
> + vcc6-supply = <&vcc5v0_sys>;
> + vcc7-supply = <&vcc5v0_sys>;
> + vcc8-supply = <&vcc5v0_sys>;
> + vcc9-supply = <&vcc5v0_sys>;
> + vcc10-supply = <&vcc5v0_sys>;
> + vcc11-supply = <&vcc_2v0_pldo_s3>;
> + vcc12-supply = <&vcc5v0_sys>;
> + vcc13-supply = <&vcc5v0_sys>;
> + vcc14-supply = <&vcc_1v1_nldo_s3>;
> + vcca-supply = <&vcc5v0_sys>;
> +
> + regulators {
> + vdd_gpu_s0: dcdc-reg1 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <550000>;
> + regulator-max-microvolt = <950000>;
> + regulator-ramp-delay = <12500>;
> + regulator-name = "vdd_gpu_s0";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vdd_npu_s0: dcdc-reg2 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <550000>;
> + regulator-max-microvolt = <950000>;
> + regulator-ramp-delay = <12500>;
> + regulator-name = "vdd_npu_s0";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vdd_log_s0: dcdc-reg3 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <750000>;
> + regulator-max-microvolt = <750000>;
> + regulator-ramp-delay = <12500>;
> + regulator-name = "vdd_log_s0";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <750000>;
> + };
> + };
> +
> + vdd_vdenc_s0: dcdc-reg4 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <550000>;
> + regulator-max-microvolt = <950000>;
> + regulator-ramp-delay = <12500>;
> + regulator-name = "vdd_vdenc_s0";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vdd_gpu_mem_s0: dcdc-reg5 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <675000>;
> + regulator-max-microvolt = <950000>;
> + regulator-ramp-delay = <12500>;
> + regulator-name = "vdd_gpu_mem_s0";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vdd_npu_mem_s0: dcdc-reg6 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <675000>;
> + regulator-max-microvolt = <950000>;
> + regulator-ramp-delay = <12500>;
> + regulator-name = "vdd_npu_mem_s0";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc_2v0_pldo_s3: dcdc-reg7 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <2000000>;
> + regulator-max-microvolt = <2000000>;
> + regulator-ramp-delay = <12500>;
> + regulator-name = "vdd_2v0_pldo_s3";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <2000000>;
> + };
> + };
> +
> + vdd_vdenc_mem_s0: dcdc-reg8 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <675000>;
> + regulator-max-microvolt = <950000>;
> + regulator-ramp-delay = <12500>;
> + regulator-name = "vdd_vdenc_mem_s0";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vdd2_ddr_s3: dcdc-reg9 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-name = "vdd2_ddr_s3";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + };
> + };
> +
> + vcc_1v1_nldo_s3: dcdc-reg10 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1100000>;
> + regulator-max-microvolt = <1100000>;
> + regulator-ramp-delay = <12500>;
> + regulator-name = "vcc_1v1_nldo_s3";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1100000>;
> + };
> + };
> +
> + avcc_1v8_s0: pldo-reg1 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-ramp-delay = <12500>;
> + regulator-name = "avcc_1v8_s0";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vdd1_1v8_ddr_s3: pldo-reg2 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-ramp-delay = <12500>;
> + regulator-name = "vdd1_1v8_ddr_s3";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1800000>;
> + };
> + };
> +
> + vcc_1v8_s3: pldo-reg3 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-ramp-delay = <12500>;
> + regulator-name = "vcc_1v8_s3";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1800000>;
> + };
> + };
> +
> + vcc_3v3_s0: pldo-reg4 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-ramp-delay = <12500>;
> + regulator-name = "vcc_3v3_s0";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vccio_sd_s0: pldo-reg5 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-ramp-delay = <12500>;
> + regulator-name = "vccio_sd_s0";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + master_pldo6_s3: pldo-reg6 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-name = "master_pldo6_s3";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1800000>;
> + };
> + };
> +
> + vdd_0v75_s3: nldo-reg1 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <750000>;
> + regulator-max-microvolt = <750000>;
> + regulator-ramp-delay = <12500>;
> + regulator-name = "vdd_0v75_s3";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <750000>;
> + };
> + };
> +
> + vdd2l_0v9_ddr_s3: nldo-reg2 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <900000>;
> + regulator-name = "vdd2l_0v9_ddr_s3";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <900000>;
> + };
> + };
> +
> + master_nldo3: nldo-reg3 {
> + regulator-name = "master_nldo3";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + avdd_0v75_s0: nldo-reg4 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <750000>;
> + regulator-max-microvolt = <750000>;
> + regulator-name = "avdd_0v75_s0";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vdd_0v85_s0: nldo-reg5 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <850000>;
> + regulator-max-microvolt = <850000>;
> + regulator-name = "vdd_0v85_s0";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> + };
> + };
> + };
> --
> 2.35.1
>
>
next prev parent reply other threads:[~2022-10-21 22:19 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-20 20:42 [PATCHv4 00/13] Introduce RK806 Support Sebastian Reichel
2022-10-20 20:42 ` Sebastian Reichel
2022-10-20 20:42 ` [PATCHv4 01/13] clk: RK808: reduce 'struct rk808' usage Sebastian Reichel
2022-10-20 20:42 ` Sebastian Reichel
2022-10-20 20:42 ` [PATCHv4 02/13] regulator: rk808: " Sebastian Reichel
2022-10-20 20:42 ` Sebastian Reichel
2022-10-20 20:42 ` [PATCHv4 03/13] rtc: " Sebastian Reichel
2022-10-20 20:42 ` Sebastian Reichel
2022-11-25 23:52 ` Sebastian Reichel
2022-11-25 23:52 ` Sebastian Reichel
2022-10-20 20:42 ` [PATCHv4 04/13] mfd: rk808: convert to device managed resources Sebastian Reichel
2022-10-20 20:42 ` Sebastian Reichel
2022-10-20 20:42 ` [PATCHv4 05/13] mfd: rk808: use dev_err_probe Sebastian Reichel
2022-10-20 20:42 ` Sebastian Reichel
2022-10-20 20:42 ` [PATCHv4 06/13] mfd: rk808: replace 'struct i2c_client' with 'struct device' Sebastian Reichel
2022-10-20 20:42 ` Sebastian Reichel
2022-10-20 20:42 ` [PATCHv4 07/13] mfd: rk808: split into core and i2c Sebastian Reichel
2022-10-20 20:42 ` Sebastian Reichel
2022-10-31 13:56 ` Lee Jones
2022-10-31 13:56 ` Lee Jones
2022-10-20 20:42 ` [PATCHv4 08/13] dt-bindings: mfd: add rk806 binding Sebastian Reichel
2022-10-20 20:42 ` Sebastian Reichel
2022-10-21 22:19 ` Rob Herring [this message]
2022-10-21 22:19 ` Rob Herring
2022-10-20 20:42 ` [PATCHv4 09/13] mfd: rk8xx: add rk806 support Sebastian Reichel
2022-10-20 20:42 ` Sebastian Reichel
2022-10-31 14:04 ` Lee Jones
2022-10-31 14:04 ` Lee Jones
2022-10-20 20:42 ` [PATCHv4 10/13] pinctrl: rk805: add rk806 pinctrl support Sebastian Reichel
2022-10-20 20:42 ` Sebastian Reichel
2022-10-20 20:42 ` [PATCHv4 11/13] regulator: rk808: Use dev_err_probe Sebastian Reichel
2022-10-20 20:42 ` Sebastian Reichel
2022-11-25 19:33 ` [PATCH v4 " Mark Brown
2022-11-25 19:33 ` Mark Brown
2022-11-25 23:46 ` Sebastian Reichel
2022-11-25 23:46 ` Sebastian Reichel
2022-10-20 20:42 ` [PATCHv4 12/13] regulator: expose regulator_find_closest_bigger Sebastian Reichel
2022-10-20 20:42 ` Sebastian Reichel
2022-10-20 20:42 ` [PATCHv4 13/13] regulator: rk808: add rk806 support Sebastian Reichel
2022-10-20 20:42 ` Sebastian Reichel
2022-11-28 19:05 ` (subset) [PATCHv4 00/13] Introduce RK806 Support Mark Brown
2022-11-28 19:05 ` Mark Brown
2022-12-11 19:59 ` Alexandre Belloni
2022-12-11 19:59 ` Alexandre Belloni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221021221939.GA523931-robh@kernel.org \
--to=robh@kernel.org \
--cc=a.zummo@towertech.it \
--cc=alexandre.belloni@bootlin.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=kernel@collabora.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lee@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=mturquette@baylibre.com \
--cc=sboyd@kernel.org \
--cc=sebastian.reichel@collabora.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.