[PATCH] arm64: dts: imx8mm: Drop QCA clk out setup on Data Modul i.MX8M Mini eDM SBC

[PATCH] arm64: dts: imx8mm: Drop QCA clk out setup on Data Modul i.MX8M Mini eDM SBC

[Marek Vasut]

The PHY clock output is not connected to anything, drop the clock output
configuration. This way, the PHY does not generate output clock.

Signed-off-by: Marek Vasut <marex@denx.de>
---
Cc: Fabio Estevam <festevam@denx.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
To: linux-arm-kernel@lists.infradead.org
---
 arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts b/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts
index 9dfd1e6bde54c..575d5632296c5 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts
@@ -196,8 +196,6 @@ fec1_phy: ethernet-phy@0 {
 			reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
 			reset-assert-us = <10000>;
 			reset-deassert-us = <10000>;
-			qca,clk-out-frequency = <125000000>;
-			qca,clk-out-strength = <AR803X_STRENGTH_FULL>;
 			qca,keep-pll-enabled;
 			vddio-supply = <&vddio>;
 
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH] arm64: dts: imx8mm: Drop QCA clk out setup on Data Modul i.MX8M Mini eDM SBC

[Shawn Guo]

On Sat, Sep 24, 2022 at 07:46:38PM +0200, Marek Vasut wrote:
> The PHY clock output is not connected to anything, drop the clock output
> configuration. This way, the PHY does not generate output clock.
> 
> Signed-off-by: Marek Vasut <marex@denx.de>

Applied, thanks!

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel