From: Sinthu Raja <sinthu.raja@mistralsolutions.com>
To: u-boot@lists.denx.de, Simon Glass <sjg@chromium.org>,
Marcel Ziswiler <marcel.ziswiler@toradex.com>,
Marek Vasut <marex@denx.de>,
Vignesh Raghavendra <vigneshr@ti.com>
Cc: Sinthu Raja <sinthu.raja@ti.com>
Subject: [PATCH 00/11] AM68 SK: Add initial support for AM68 Starter Kit
Date: Thu, 27 Oct 2022 16:18:35 +0530 [thread overview]
Message-ID: <20221027104846.11820-1-sinthu.raja@ti.com> (raw)
From: Sinthu Raja <sinthu.raja@ti.com>
AM68 Starter Kit (SK) is a low cost, small form factor board designed
for TI’s J721S2/AM68 SoC. TI’s J721S2/AM68 SoC comprises of dual core A72, high
performance vision accelerators, hardware accelerators, latest C71x
DSP, high bandwidth real-time IPs for capture and display. The SoC is
power optimized to provide best in class performance for industrial
and automotive applications.
Refer below link to J721S2/AM68 Technical Reference Manual for further details:
http://www.ti.com/lit/pdf/spruj28
AM68 SK supports the following interfaces:
* 16 GB LPDDR4 RAM
* x1 Gigabit Ethernet interface
* x1 USB 3.1 Type-C port
* x2 USB 3.1 Type-A ports
* x1 PCIe M.2 M Key
* 512 Mbit OSPI flash
* x2 CSI2 Camera interface (RPi and TI Camera connector)
* 40-pin Raspberry Pi GPIO header
This series of patch add initial support for AM68 starter kit.
Design files can be referrred from https://www.ti.com/lit/zip/SPRR463
Sinthu Raja (11):
configs: j721s2_evm_r5: Enable support for building multiple dtbs into
FIT
configs: j721s2_evm_a72: Enable support for building multiple dtbs
into FIT
configs: j721s2_evm: Enable configs to store env in MMC FAT partition
board: ti: j721s2: Add support to update board_name for am68-sk
board: ti: j721s2: Enable support for reading EEPROM at next alternate
address
board: ti: j721s2: Add support for detecting multiple device trees
arm: j721s2: Add support for selecting DT based on EEPROM
arm: dts: Add initial support for AM68 Starter Kit System on Module
arm: dts: Add support for A72 specific AM68 Starter Kit Base Board
arm: dts: k3-am68-sk: Add r5 specific dt support
include: configs: Update env for selecting right dtb
arch/arm/dts/Makefile | 4 +-
.../arm/dts/k3-am68-sk-base-board-u-boot.dtsi | 216 ++++++++++
arch/arm/dts/k3-am68-sk-base-board.dts | 395 ++++++++++++++++++
arch/arm/dts/k3-am68-sk-r5-base-board.dts | 226 ++++++++++
arch/arm/dts/k3-am68-sk-som.dtsi | 167 ++++++++
arch/arm/mach-k3/j721s2_init.c | 59 +++
board/ti/j721s2/evm.c | 32 +-
configs/j721s2_evm_a72_defconfig | 5 +-
configs/j721s2_evm_r5_defconfig | 4 +
include/configs/j721s2_evm.h | 4 +
10 files changed, 1105 insertions(+), 7 deletions(-)
create mode 100644 arch/arm/dts/k3-am68-sk-base-board-u-boot.dtsi
create mode 100644 arch/arm/dts/k3-am68-sk-base-board.dts
create mode 100644 arch/arm/dts/k3-am68-sk-r5-base-board.dts
create mode 100644 arch/arm/dts/k3-am68-sk-som.dtsi
--
2.36.1
next reply other threads:[~2022-10-27 11:14 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-27 10:48 Sinthu Raja [this message]
2022-10-27 10:48 ` [PATCH 01/11] configs: j721s2_evm_r5: Enable support for building multiple dtbs into FIT Sinthu Raja
2022-10-27 10:48 ` [PATCH 02/11] configs: j721s2_evm_a72: " Sinthu Raja
2022-10-27 10:48 ` [PATCH 03/11] configs: j721s2_evm: Enable configs to store env in MMC FAT partition Sinthu Raja
2022-10-27 10:48 ` [PATCH 04/11] board: ti: j721s2: Add support to update board_name for am68-sk Sinthu Raja
2022-10-27 12:59 ` Tom Rini
2022-10-27 10:48 ` [PATCH 05/11] board: ti: j721s2: Enable support for reading EEPROM at next alternate address Sinthu Raja
2022-10-27 10:48 ` [PATCH 06/11] board: ti: j721s2: Add support for detecting multiple device trees Sinthu Raja
2022-10-27 13:02 ` Tom Rini
2022-10-27 10:48 ` [PATCH 07/11] arm: j721s2: Add support for selecting DT based on EEPROM Sinthu Raja
2022-10-27 13:04 ` Tom Rini
2022-10-27 10:48 ` [PATCH 08/11] arm: dts: Add initial support for AM68 Starter Kit System on Module Sinthu Raja
2022-10-27 13:06 ` Tom Rini
2022-10-27 10:48 ` [PATCH 09/11] arm: dts: Add support for A72 specific AM68 Starter Kit Base Board Sinthu Raja
2022-10-27 10:48 ` [PATCH 10/11] arm: dts: k3-am68-sk: Add r5 specific dt support Sinthu Raja
2022-10-27 10:48 ` [PATCH 11/11] include: configs: Update env for selecting right dtb Sinthu Raja
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221027104846.11820-1-sinthu.raja@ti.com \
--to=sinthu.raja@mistralsolutions.com \
--cc=marcel.ziswiler@toradex.com \
--cc=marex@denx.de \
--cc=sinthu.raja@ti.com \
--cc=sjg@chromium.org \
--cc=u-boot@lists.denx.de \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.